Cannot open Query/Workbook with Analyzer on my PC

Hi,
I can't open queries or workbook on my computer. When I click on the icon "open", nothing happens !!!!!
1st - I don't understand why the icon description is in german : "Offnen"???
2nd - here is my configuration: windows 7, Excel 2007 (student pack) and SAP BW 710
I can execute Query Designer, Crystal Report... ... My only problem concerns the Analyzer.
Could you please help me?
FYI, I installed the note 1121263 (= the zip file "lockbackRegKey.msi" on my PC)

Hi,
The reason is that you use Windows 7 and your colleagues use Windows XP.
Official support for Windows 7 will start with SAP GUI for Windows 7.20 only.
At this moment, only a higher patch of GUI 710 could work well.
You have to use SAP GUI for Windows 7.10 patchlevel 15 (or a
newer patch) and the most currently available patches for all
other SAP Frontend components in use by you (like BI Frontend,
BW Frontend).
Besides, Bex3.x tools can no longer be used on Windows 7 with GUI710,
and you need to use BI7.0 Bex addon for GUI710 instead.
You can download them from SAP service market place with the following patch (if you don't have
authorization to access, you may need to contact your system administrator):
http://service.sap.com/swdc:
Support Packages and Patches->SAP Frontend Components->
SAP GUI FOR WINDOWS->SAP GUI FOR WINDOWS 7.10 CORE
->SAP GUI FOR WINDOWS 7.10 CORE -> get the latest patch
http://service.sap.com/swdc->Support Packages and Patches
->SAP Frontend Components->BI ADDON FOR SAP GUI->
BI 7.0 ADDON FOR SAP GUI7.10->BI 7.0 ADDON FOR SAP GUI7.10
-> get the latest patch
Regards,
Patricia

Similar Messages

BEx Analyzer cannot open query, button is in German

Hi Gurus,
I am using MS Excel 2003 and have installed all windows updates. I even have successfully installed the patch KB907417 from Microsoft, but still I cannot open queries using BEx Analyzer. The BEx icons display German labels instead.
How should I fix this?
Please recommend links for SAP GUI and BEx updates and patches.
Thank you very much!
Regards,
Btup

Hi Btup,
First just try to install Install Microsoft Excel patches version of Excel is: Excel 2003 (11.8169.8172) SP3 and see how it goes.
If it doesn't work then try following steps:
Install SAPGUI 710 to Level 4
Install bw350gui710_1-10004473.exe to install patch BI 3.x to Level 1.
Install bw350gui710_2-10004473.exe to install patch BI 3.x to Level 2.
Install bi710_2-10004472.exe to install patch BI 710 to Level 2.
Install bi710sp02p_201-10004472.exe to install patch BI 710 to SP2.
Install bi710sp03_300-10004472.exe to install patch BI 710 to SP3.
Install bi710sp04_400-10004472.exe to install patch BI 710 to SP4.
Install Microsoft Excel patches version of Excel is: Excel 2003 (11.8169.8172) SP3
Regards,
Shalin Shah

Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working

Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working. A problem has caused the program to stop working

Which Operating system you are using?
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)] and then try to open the file.

Cannot open pdf files with Firefox's built-in pdf viewer

This just started (I think) with Firefox 37.01. This is on Win7-X64. I cannot open pdf files with the Firefox built-in pdf viewer. If I click on the file or try to open it from within Firefox, it brings up a "opening filename.pdf" message. If I select the "Open with" radio button as 'Firefox (default),' it just keeps looping on this process; it never opens. In Tools => Options => Applications, Portable Document Format (PDF) is indicated as 'Preview in Firefox.' I've never had any other PDF viewer installed on this computer. I've tried disabling all plug-ins and extensions, but it still doesn't work. I searched for solutions but haven't found any for this specific issue.
Thanks for the help.

Hello,
Have you tried, to start Firefox in safemode you can do so by following these steps
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

I cannot open a file with suffix .ra

i cannot open a file with suffix .ra

thats a real time audio file. download real player to open it.
Ryan

HT3775 cannot open avi file with quicktime pro7

I cannot open avi file with quicktime pro 7

VideoLAN - Download official VLC media player for Mac OS X

Cannot open project file with write access...

I have seen that this problem has been reported before but have yet to find a solution.
I have my project file in an external hard drive. When I plug the hard drive to another computer and want to save it I get this message:
"Cannot open project file with write access. The file may be locked or you don't have permission to write to this location. Select Save As..."
I don't want to Save As because other projects make reference to this file and also my Encore file will be messed up.
FYI both computers use Windows 7.
Any solutions?

Right click on the folder in Question and select properties. Then select the security tab. Make sure you add everyone to the user list. You do that by selecting edit and then add. Type in everyone in the object section and hit ok. Then select the everyone user and checkmark the Full control. Hit Apply and it will adjust the permissions for the folder and subfolders and files.
Eric
ADK

Cannot open the document with 'Composition failed to load'.

After confronting an error message during the publishing, I cannot re open the document with 'composition failed to load' message.
I desperately need to save this document! is there any chance to save it?
the screenshot is here.

Thank you for your help and advice.
It is great to be fixed in near future. good news!
Kim Kyoung Hong
Sent with Airmail
켜짐 2014년 10월 14일 에서 오후 3:58:58, Bharadwaj ([email protected]) 작성됨:
Cannot open the document with 'Composition failed to load'.
created by Bharadwaj in Edge Animate CC - View the full discussion
This is the error you are getting when you are opening the published content on web. This is a bug, but you can use the below fix.
Open the publish/web/index_edge.js and remove the "use strict"; statement at the beginning.
This will fix the problem. We will address this issue in the next release.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6822974#6822974
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Edge Animate CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Unable to open Query in Bex Analyzer

Hi All,
I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
Any pop up something like that which is blocking the execution of Query??And its in production system,so its pretty urgent.

Hi,
RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
The user had no rights to read some infoprovider data. After granting the rights he could run the query.
Regards. Leszek

HT201269 my iphone 3 cannot open.always blinking with the apple logo, how can i open my iphone 3?

my iphone 3 cannot open.always blinking with the apple logo, how can i open my iphone 3?

Hello there, Shaneol10.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If the iPhone still isnt recognized, refer to these documents (depending on which Operating System you are using)
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Cannot open query in Excel (BEX analyzer)

Hello Experts,
Issue: Cannot open the BEX report in Excel but can open the same report on IE.
1) I am trying to open a BEX report "ReportA" in Excel (BeX Analyzer).
2) As soon as the report opens it shows me a message "Do you want to open the 3.X workbook for upgrade"
3) I click on "OK"
4) then i get a message window listing a lot of warnings liike " Access to project denied" "creation of items failed"
5) i click on "OK"
6) Now, variable entry screen appears
7) i enter values and click on "OK" the report does not show any data.
Now, the same report "reportA" when i open it in Internet Explorer, it displays data. What can be reason for this problem in BEX analyzer ?
Please comment.
Regards,
Suraj S Nair
Edited by: Suraj S Nairon Dec 28, 2009 10:50 AM

Hi Suraj,
If you want to execue your query, you can use the bex analyzer.
If you are opening the query from query designer 3.x query in 7.0 fronend, it will get upgraded and then cannot be reveted.
In your case this automatic migration might be havng some issues, owing to complexities.
Please recheck.
-Vikram

Error when opening a workbook with mandatory variables

BEx analyzer displays an error message window in the same time as the variable popup window.
The worbook is linked to 1 query that uses 2 mandatory variables (month ?, year ?), and was defined in the test system.
I assume that values are thus saved within the workbbok.
The developper had 0bi_all autorisation.
When a reporting user is opening it (also in the test system), the error message is displayed.
This happens only the 1st time when Analyzer is started, and by clicking on the OK button, we are able to run the query.
The next workbook refresh runs without the error message display.
Question = does anybody know the reason of this, and how to avoid the error message ?
more infos:
error message E019(R9E) appears for each variable (thus, 2 time with a query with 2 variables):
Help type 5 is not valid for the platform NONE
Exception 5 occured while calling IWB_HTML_HELP_URL_GET
the details of this error message is:
Diagnosis
   You tried to start the online help with help type on platform. Help type is not supported on this platform.
System Response
   Profile parameter eu/iwb/help_type must contain a valid help type.
Diagnosis
   The documentation is not correctly connected to the BI server.
System Response
   The documentation cannot be displayed.

i checked the query and authorisation with RSRV, but this didn't help, furthermore, a lot a functions are not implemented in the system, sorry.
i also changed the query and workbook, and i think that it depends on the workbook release 3.x or 7.
imagine following situations: same query 7.0, same workbook 7.0
with BI7
1) opening the query with variables doesn't display the error message
2) refreshing the workbook with the query with variables displays the error message (only for a non mandatory variable - as soon as there is a variable, the error message is displayed)
3) refreshing the workbook with the query without variables doesn't display the error message
with BW 3.x
4) refreshing a new workbook 3.x with the query with variables doesn't display the error message
i also investigate in the function modules for workbooks (RS...), but nothing helped.
i still think that it is linked to authorisations, because with sap_all, the message isn't displayed.
how can i continue ?
Edited by: Claire Mignerey on Mar 17, 2009 2:37 PM

Cannot open RAW file with new camera

I just purchased a Nikon D610 that I use to shoot RAW files. When I inserted the SDHC card in my Mac, I got a message that "Photoshop cannot open this file. If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw update installed via Help>Updates..." This is the first time I've had this problem. With my former Nikon D600, the RAW files opened right away with no problems. I installed Adobe Camera Raw 6.7 and DNG Convertor 8.6, but it still doesn't work.

I've got some good news and some bad news.
The bad news is the D610 is supported in Camera Raw but you need a minimum of version 8.3 for it to work out-of-the-box. I know CC works with updates; I believe CS6 does too w/ updates. If you have anything earlier than that you need to upgrade.
The good news is that the D610 is supported in DNG Converter since version 8.3 but I don't know why it's not working for you. What's happening when you go to convert? Same error message?

Error when opening query in BEx Analyzer BI7

Hi all,
I get the following error when I open a query in the Analyzer.
<b>Unable to convert character set 4103 to character set 4103. possible.</b>
Afterwards it closes the connection.
Any help will be appreciated.
Cheers,
Meurant.

Hi Meurant,
Most likely it is a mismatch between your Client GUI and sever.eps
The following steps helped in some cases.
1) Uninstall the SAP GUI on your m/c.
2) Upgrade all you operating system patches to the required level...If it's Windows XP.....just
get the latest updates from Microsoft.
3) Re-install GUI for 7.0
Good luck, BB

With OSX 10.8.5 cannot open PDF files with 11.0.04?

using OSX 10.8.5 cannot open PDF files from Xerox Docushare with recently downloaded PDF 11.0.04

That crash is a known bug in Apple's display code.
But it's the QuickDraw code, which Apple does not want to fix.
There is nothing we can do about that OS bug, other than to suggest using a more recent version of Photoshop written to the Cocoa APIs.

Cannot open Query/Workbook with Analyzer on my PC

Similar Messages

Maybe you are looking for