"Cannot open semaphore" in Citrix environment

Hi
I have a TUX running on a Citrix Server in NT box and is having the following
error in over and over again.
TRACE:at: { tpreturn(2, 0, 0x14ff8f0, 100000, 0x0)
TUXNT_CAT:2: ERROR: Cannot open semaphore 'IPC651': The system cannot find the
file specified.
ELINKSBLETOA.632: TRACE:at: } tpreturn [long jump]
I have tried both rebooting the server and re-installing TUX, doesn't help. I
am suspecting that this is because of the nature of Citrix, where TUX is confused
with which client it is connecting to. Does anyone have any similar experience?
Any help would be appreciated.
Regards
Nathan
Citrix is a emulator kind of software which create a new session for every client
that connects to it. All applications are run on the server box only. Very much
like a graphical version of telnet.

Hi Manoj,
Thanks for your response. Well, even through I am not 100% sure, I am fairly confidence
that TUX does like Citrix architecture after a series of testing. Here is my theory,
while it remains okay to have TUX client in Citrix environment, TUX server is
confused with the session architecture in Citrix. While TUX is "routing" "some"
of the requests and messages, it looks for a semapore that is handled by Citrix
(and might have destroyed?). And thus it fails.
Of course... its just my guess work. =P
Thanks again
Regards
Nathan Lau
"Manoj SASIDHARAN" <[email protected]> wrote:
>
Hello Nathan,
I have tried using VB applications that r Tuxedo clients on Citrix MetaFrame
server.
And they worked fine.
Really not sure whether u can run Tuxedo servers on Citrix.
Do u have a sound reason to run Tuxedo servers run on the Citrix box???
regards
MS
"Nathan" <[email protected]> wrote:
Hi
I have a TUX running on a Citrix Server in NT box and is having thefollowing
error in over and over again.
TRACE:at: { tpreturn(2, 0, 0x14ff8f0, 100000, 0x0)
TUXNT_CAT:2: ERROR: Cannot open semaphore 'IPC651': The system cannot
find the
file specified.
ELINKSBLETOA.632: TRACE:at: } tpreturn [long jump]
I have tried both rebooting the server and re-installing TUX, doesn't
help. I
am suspecting that this is because of the nature of Citrix, where TUX
is confused
with which client it is connecting to. Does anyone have any similarexperience?
Any help would be appreciated.
Regards
Nathan
Citrix is a emulator kind of software which create a new session for
every client
that connects to it. All applications are run on the server box only.
Very much
like a graphical version of telnet.

Similar Messages

Getting error "IntelliSense: cannot open source file "Environ.h"

Hi,
I have a VC++ project which adds tool bar to arobat reader. But when i build this project using VS 2010 it's giving a error "IntelliSense: cannot open source file "Environ.h" and some other header files.
Please suggest me to resolve this issue.
Thanks
Shiva

Hi,
Thanks for yourreply, can you tell me which version or VS it supports.
Thanks
Shiva

Why is it when I try to load photoshop 5.5 it says "cannot open the application install 5.5 b/c the classic environment is no longer supported"?

What does it mean; "cannot open the application photoshop 5.5 because the classic environment is not supported"

It's not part of Mac OS X 10.5 on a PowerPC Mac or of any OS on an Intel Mac. You need to use Mac OS X 10.4.11 or earlier, or a newer Photoshop version.
(60435)

I have been trying to move pictures to iphoto and am now receiving a message that "you cannot open the application iphoto because the classic environment is no longer supported.

I have been trying to move pictures into iphoto and am now receiving a message the say I "cannot open the application iphoto because the classic environment is no longer supported."

Launch iPhoto the the Option key held down and create a new library. See if you can import those photos into it. If you can then your current library is damaged.
If that's the case make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
Fix #1
delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
2. delete iPhoto's cache files that are located in the Home/Library/Caches/com.apple.iPhoto folder.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select last three options.
Fix #3
Use iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Cannot open Registry key HKEY_LOCAL_MACHINE\Software\SAP\NSP\Environment ?

Hello, after installing the NetWeaver 7.01 Trial on my Windows Server 2008 I get this error:
Cannot open Registry key HKEY_LOCAL_MACHINE\Software\SAP\NSP\Environment (Error 2 ENOENT: No such file or directory OR: The system cannot find the file specified.) [ntservmgr.cpp 306]
Starting the server does not work, it goes from grey to yellow to grey again and I think the above error is the cause. Whats the problem?
Thanks !

Thank you Srikishan, I reviewed the link you provided, it solves uninstall and re-install problem for one laptop, however, we have many laptops, can't do manual registry clean up for all of them. The installation was done by mobile client silent script, needs to be successful the very first time.
This error only happens with the very 1st installation, means fresh OS that never had any SAP, I am wondering what is the installation program trying to change in the registry, does it have to go that deep into registry? and what other components are affected by the error "Can't open registry key "HKEY_LOCAL-MACHINE\SOFTWARE\SAP\SAP DBTECH"?
From the log, the command ran before the error was "CALL: SDBINST -b -t sapmc -f C:\Program Files\SAP Netweaver Mobile Client\MaxDB Files\sdb_MIDB_sample.cfg", is it a sample program and do we need it? is this caused the error?
for remaining errors(many of them), there is one very odd
"SYS: "c:\sdb\programs\runtime\7300\bin\irconf.exe" -i -p "c:\sdb\programs\runtime\7300": Error : Cannot find any installed version of CPC Driver.."
What caused it?
Thanks,
Grace
Edited by: Grace Mu on Jul 25, 2011 4:34 PM
Edited by: Grace Mu on Jul 25, 2011 4:37 PM

Cannot open Citrix and my apple approved Mircosoft Office package anymore.

After the installation I cannot open Citrix and my apple approved Mircosoft Office package anymore.What happend? I need these programms to work in my homeoffice? Do I need to buy an ordinary computer with Microsoft?
Who can help me?

1. Restore you Mac to Snow Leopard from your Snow Leopard backup.
2. Partition your hard drive or add an external hard drive and install Lion there.
3. Dual-boot (System Preferences:Startup Disk) to get into Snow Leopard when you need access to Word and/or Citrix; or to Lion when you need access to iCloud or apps that require Lion.
Consider upgrading to Office 2008 or 2011, both of which will work in Lion. I have no experience with Citrix to advise of a possible update for Lion.

Error on Sales Order - u201Cyou cannot open rows in the document"

Hi everyone,
Does anyone have any idea why this error would be occuring when a user tries to add a sales order?
u201Cyou cannot open rows in the document [sales order u2013Rows u2013 Rows status] [line0] [Message131 -194]?
If the user closes the sales order and then recaptures it, the sales order goes through. As you can imagine, the order clerks are getting a bit angry when their large orders have to be closed.
Thanks.
Kind regards,
Simon Carolin

Hi
If it is affecting your business severly ,log a support to SAP .Meanwhile ,
Lets start some troubleshooting your system
1.Are you using formatted search in Sales Order
2.Are you using sp_transaction notification
3.Did you do any changes in your system recently like upgrade ,
4.Is it happen only to certain item or BP
Hint :
1.Disable all addon
2.Disable your formatted search
3.Disable sp_transaction notification
4.Try to create a sales order and .,
Does error occur again? Please also specify your SBO version and Patch level
<Note> Try test your issue test environment
This will help to narrow down
Thank you
Bishal

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

Oracleorcl: error while loading shared libraries: libaio.so.1: cannot open

Hi,
I installed Oracle 10g on RHLinux AS4. I created a initOEMREP.ora file
in $ORACLE_HOME/dbs.
my .bash_profile file is,
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
#Added on 05-feb-2008
#For oracle1g db installation
export ORACLE_SID=OEMREP
export ORACLE_BASE=/home/app/oracle10gdb
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1
export PATH=$ORACLE_HOME/bin:$PATH:.
export LD_LIBRARY_KERNEL=$ORACLE_HOME/lib
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TMP=/home/tmp
export TMPDIR=/home/tmp
While
$sqlplus "/as sysdba"
I am getting
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 6 21:27:08 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
oracleorcl: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
Please help me to solve this.
Regards,
Mathew

Hi,
THank you for the replay. Where will I get this package?
Regards,
Mathew.

Oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared ob

Hi,
I'm installing Oracle 9i on IA 64, OS linux. I keep getting the following error when I run sqlplus
oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared object file: No such file or directory
ERROR:
ORA-24314: service handle not initialized
the LD_LIBRARY_PATH=$ORACLE_HOME/lib
is set in the environment. After this error it prompts me for a user name?
Regards

Hi Ruben
Before starting please make sure you have maintained all env for sidadm
commands may vary depending on os in case
Whenever I start SAPINST I set following before hand
TMPDIR=/usr/sap/install/SRA_CI : just a log directory
export TMPDIR
LD_LIBRARY_PATH=/usr/sap/sapmnt/SRA/exe
export LD_LIBRARY_PATH
umask 022
JAVA_HOME=/usr/sap/java
export JAVA_HOME
PATH=$/bin:$
export PATH
SAPINST_JRE_HOME=/usr/sap/java
export SAPINST_JRE_HOME
Hope this helps
success!!

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

"error while loading shared libraries: libnotify.so.1: cannot open.."

This is what happend after I rebooted the computer today.
[ ~ ]$ pino
pino: error while loading shared libraries: libnotify.so.1: cannot open shared object file: No such file or directory
[ ~ ]$ gnome-gmail-notifier
gnome-gmail-notifier: error while loading shared libraries: libnotify.so.1: cannot open shared object file: No such file or directory
[ ~ ]$ liferea
liferea: error while loading shared libraries: libnotify.so.1: cannot open shared object file: No such file or directory
[ ~ ]$ linuxdcpp
linuxdcpp: error while loading shared libraries: libnotify.so.1: cannot open shared object file: No such file or directory
Im guessing Im not the only one? Dunno what to do?

Thanks!
This is how the PKGBUILD looks like:
build() {
cd "${srcdir}/liferea-${pkgver}"
patch -Np1 -i "$srcdir/libnotify-0.7.patch"
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --disable-schemas-install
make
This is how my PKGBUILD looks like:
build() {
cd "${srcdir}/${_pkgrealname}-${pkgver}"
patch -Np1 -i $srcdir/libnotify-0.7.patch || return 1
patch -Np1 -i ../getenv_sync.patch || return 1
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --disable-schemas-install || return 1
make || return 1
But it doesnt work:
[ ~/pkgbuilds/liferea-ext4 ]$ makepkg -csi
==> Making package: liferea-ext4 1.7.4-1 (Fri Mar 18 11:27:45 CET 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found liferea-1.7.4.tar.gz
-> Found getenv_sync.patch
-> Found libnotify-0.7.patch
==> Validating source files with md5sums...
liferea-1.7.4.tar.gz ... Passed
getenv_sync.patch ... Passed
libnotify-0.7.patch ... Passed
==> Extracting Sources...
-> Extracting liferea-1.7.4.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
patching file src/notification/libnotify.c
Hunk #1 FAILED at 150.
Hunk #2 FAILED at 244.
2 out of 2 hunks FAILED -- saving rejects to file src/notification/libnotify.c.rej
==> ERROR: A failure occurred in build().
Aborting...
[ ~/pkgbuilds/liferea-ext4 ]$
What am I doing wrong?
Last edited by Hund (2011-03-18 09:30:55)

Error while loading shared libraries: libxerces-c.so.26: cannot open shared

Hi,
I'm trying to install SRM-MDM Catalog 2.0 under SUSE_LINUX Enterprise Server 10 (x86_64).
First to all I'm trying to install Server part. So I navigate under the CD installation: /Master_Data_Server/LINUX_X64/MDM/bin/ and then execute ./mds-r.
The following error appears: error while loading shared libraries: libxerces-c.so.26: cannot open shared object file: No such file or directory.
libxerces-c.so.26 is located under /Master_Data_Server/LINUX_X64/MDM/lib/
Could you please help me?
Thanks in advance!

Thanks for your comment Shiv, Yes I know that MDM 5.5 is out of standard maintainence but anyway our business scenario requires SRM-MDM 2.0.
If anyone finds the same error I mentioned, It has been solved using ldconfig -v in the library directory of choice.
I'd like to ask another issue: Right now We have the following error after executing ./mdis-r or ./mds-r:
Could not open language resource file "LangStrings/ImportManagerCommon.lang". Try setting the MDM_HOME environment variable.
Could you please help me how to do if?
Thanks in advance,
Edited by: Guillermo Montes on May 5, 2010 4:21 PM
Edited by: Guillermo Montes on May 5, 2010 4:22 PM

Cannot open shared object file: on Informatica Power Centre(8.1.1) Installa

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

Cannot open shared object file: on Informatica Power Centre Installation

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

"Cannot open semaphore" in Citrix environment

Similar Messages

Maybe you are looking for