Cannot open the .ecs file created already

Hi,
I created an ecs file for the x12 856 5010 version and saved it.later when i try to open it I get the following error
Ecs file corruption.Not enough room in the output error.what is this error message.How do i resolve this
Thanks for you help,
souji

Souji,
Not sure but issue may be related to OS or dot net. Can you try to open the same file in any other machine which has B2B Doc Editor installed? You may also search on Google for "Simple methods to deal with Not Enough Room In Buffer To errors"
Regards,
Anuj

Similar Messages

  • IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open

    Hi there,
    i hope i'm in the right board.
    I recently tried to compress avi-files i collected from various cameras throughout the last years.
    At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
    I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
    So i gave it a last, let's call it fail-proof, try:
    I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
    All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
    I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
    Thanks in advance
    Markus
    P.S.
    I'm using LabView 2010 and VAS of 02/2014.

    Hello Markus,
    have you had a look at this:
    Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
    Compressing avi files-Discussion Forums
    Regards,
    eletra

  • Mac Word 2008 - hyperlink message "Word cannot open the specified file"

    I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
    Any ideas what could be wrong?
    My OSX is 10.5.1.
    The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
    START OF PASTE FROM SMASHWORDS STYLE GUIDE:
    How to create a linked Table of Contents. Consider this feature in “beta.” My
    thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
    which I have augmented based on my own experience adding a ToC to the Style
    Guide (woo hoo!).
    By adding a linked table of contents, you can help readers navigate your
    document. This is especially useful for non-fiction. Most fiction doesn’t
    need it. If you follow the instructions below, the ToC should work in your
    EPUB, MOBI and PDF files, but it will not work in our other formats.
    First, create your table of contents where you want it by typing it out. Make
    sure the text is normalized just like the rest of your Smashwords’ Word
    document. Example:
    Contents
    Chapter 1
    Chapter 2
    Chapter 3
    Chapter 4
    Etc.
    Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
    Booksmark function is under the Insert tab. Go through your document, and at
    each Chapter Start or Indexed item, you will highlight it and then select
    Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
    item and then click add. It’s very important to use the first word of your
    heading you’re linking to, because later on, when you add the hyperlinks,
    Word displays the bookmark shortcuts in alphabetical order. With many
    bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
    tough to link to the correct bookmark. If you want to link to a chapter named
    How to Publish Ebooks, I’d recommend naming your bookmark
    “HowToPublishEbooks” to make it easy to locate. If you instead name it,
    “publishebooks,” you’ll frazzle your brain and make mistakes.
    Repeat the process above for every Chapter Start as well as for other matter
    in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
    to every section in the Style Guide, because otherwise the ToC would have
    been three pages long. This is your call.
    Next, return to your table of contents and highlight the word “Contents.”
    Click insert, bookmark, and label this last bookmark “Contents”. Formatting
    note: Bookmarks cannot have spaces or odd characters. If instead of
    “Contents” you called the label in the document Table of Contents, as I did,
    then when you insert the bookmark, name the bookmark “TableofContents,” one
    word, or “toc.”
    Next, add the hyperlinks to your Chapter Starts. In your table of contents,
    if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
    insert Hyperlink. As you can see in the Style Guide, I tried to use more
    descriptive labels. In Word’s Hyperlink menu on the left hand side, select
    “Place in this document.” You will now see your bookmarks listed in the main
    window. Select Chapter1 bookmark (or whatever you labeled it) and then click
    ok. Do this procedure for every chapter and piece of matter in the table of
    contents.
    Final step. Now you can link back to the Table of contents. Move through your
    document to each indexed item or Chapter start and highlight it. Then click
    insert, hyperlink, and then select “Place in this document.” When the
    bookmarks are showing in the main window, select the bookmark labeled
    “Contents,” assuming that’s what you named your Table of Contents. Do this
    for each and every chapter and or indexed item.
    After you are done, all your links will be underlined. You will need to test
    and make sure you linked everything properly. In most Word versions, you just
    click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
    hyperlink and make sure it takes you where you need to go in the document.
    Advice: Word has an automatic ToC generation feature under the reference tab.
    Do not use this. It uses automated headings and formatting to generate the
    ToC and this will un-normalize your text and cause font conversion issues in
    your Smashwords files.
    END OF PASTE FROM SMASHWORDS STYLE GUIDE.
    I did all that as described but I still get the message "Word cannot open the specified file".
    Could you help please?

    This question would be better addressed to...
    http://www.microsoft.com/mac/help.mspx
    I think the operative phrase from that article is...
    *Consider this feature in “beta.”*
    -mj

  • I download last update numbers. Now I cannot open the previous files. The screen asked to upload. How to solve this problem?

    The screen  asked to donwload the new numbers program. I already have done it. I cannot open the previous files. How to solve this problem?

    If by the "screen asked to upload" you mean you see a message to upgrade Numbers, then probably what is happening is that you have two versions of Numbers on your Mac, the new version in the main Applications folder and the old one in a subfolder named 'Work '09.  This is as intended.
    Try opening your document with the new version of Numbers that is in the Applications folder, not the Numbers that is in the subfolder.
    SG

  • Is it possible to view .bbb files in a mac? how? I am transferring my bberry contacts onto my macbook pro, but cannot open the .bbb files...

    Is it possible to view .bbb files in a mac? how? I am transferring my bberry contacts onto my macbook pro, but cannot open the .bbb files...

    Well, if simply double-clicking the .bbb file doesn't work, first try dragging the file onto the BBDM icon (either in the Dock, on the desktop or in the Applications folder or wherever it's stored). That tells Finder to open it with that application.
    Otherwise, right-click on the file and choose the Open With option. If BBDM is not the default, select Get Info and use the Open with box from there to select it (if it's not in the list, choose 'other' and navigate to it), then click the 'change all' button.

  • Sony SLT-A99V RAW files compatibilty with Adobe Photoshop Elements 9 : I cannot open the ARW file

    Sony SLT-A99V RAW files compatibilty with Adobe Photoshop Elements 9 : I cannot open the ARW file from PSE9, what can I do, what are the options ?
    Je ne peux pas ouvrier mes fichier RAW de mon Sony SLT-A99V avec Adobe Photoshop Elements 9 : quelles sont les options ?

    Il ya deux possibilités.
    (1) Acheter la mise à niveau PSE11. (2) Téléchargez le logiciel gratuit. Puis convertir des fichiers ARW à Adobe DNG et on peut les utiliser avec la version PSE9.
    Windows download click here DNG Converter 7.2
    Mac download click here DNG Converter 7.2
    You can convert a whole folder of ARW images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Please help i cannot open the pdf files of cic.gc.ca

    please help i cannot open the pdf files of cic.gc.ca

    Hi ooovvvaaaiiisss12345.
    Are you trying to view the pdf's from the browser are after downloading it and viewing via Reader.
    Please let me know the OS and browser you are using.
    Are you able to view the pdf's on other websites?
    Let me know what errors you get while viewing the pdf's

  • The installation was canceled: Install Windows: Windows cannot open the required file E:\sources\install.wim Error code: 0x80070570

    I have a Windows XP computer and accidentally formatted the C:\ Drive. I then decided to buy the Windows Vista CD installation and popped it into the CD Drive, there was a problem with the Drive so I had to move it onto a USB Drive instead(on another computer).
    When I booted my PC(C: Drive formatted) all went well until I typed in the product key and clicked next. It shows a dialog box:
    Install Windows
    Windows cannot open the required file E:\Sources\Install.wim. The file may be                                        
    corrupt or missing. Make sure all files required for installation are available, and                                                
    restart the installation. Error code: 0x80070570
    I am in urgent need of help immediately. Please help me!
    P.S. and thanks for advance for any help. Sorry for anyone with the same problem.
    PC info: HP dc5750 Small Form Factor

    It sounds like there's a problem with that file. You will need to re-copy the files to USB or even re-download the operating system from Microsoft.

  • I cannot open the pages document created on my ipad when using my Mac.  I've tried downloading the update but it needs Maverick.  I've tried downloading Maverick and it fails.

    I cannot open the pages document created on my ipad when using my Mac.  I've tried downloading the update but it needs Maverick.  I've tried downloading Maverick and it fails.

    What OS version are you running?
    Try the upgrade button here:
    http://www.apple.com/osx/how-to-upgrade/

  • Cannot open the Domain file in iWeb, Mavericks

    Hello world of !
    I just formatted the MacBook Pro, performing a clean instal of Mavericks. Having a HDD and a SSD into the machine, the Domain file of my iWeb sites was saved on the HDD while the OS and the apps are running on the SSD. The problem that I now have is that whenever I try to open the Domain file and get to my websites, the iWeb opens anew, with no website inside, inviting me to choose a template to create a new one.
    Any hint as to how to get to my websites?
    Thank you all in advance!
    A Mac user from Romania!

    To open your domain file in Lion, Mountain Lion, Mavericks or Yosemite or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
    delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. The script modifies the iWeb preference file each time it's launched so one can switch between domain files if desired.
    NOTE:  once the domain file has been opened the first time you won't need the iWeb Switch Domain app again until you decide to switch domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    NOTE: for Mavericks, 10.9 ,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:

  • Cannot Open a PDF File Created in Acrobat 9.0

    My associates cannot open a PDF that I have created from Word 2007 using Acrobat 9.0 if I save the PDF to our network. They can open the PDF if I email the file to them as an attachment. Does anyone know what the problem might be?

    It may depend on how you transfer the PDF to the network. Saving to a network seems to have mixed results with Acrobat and always has. Try saving locally and copying to the network drive. If you are transferring the file with FTP, be sure that you use binary file transfer.

  • Cannot open old DV files Created in older versions of PP

    I started a project on one machine using CS3. I captured all of the footage using CS3. The footage was regular DV footage captured direct from a DV camcorder, no special codecs or anything. Three are not even any effects of any kind on any clip. its all simply captured footage and thats all.
    I move the capture hard-drive to my CS4 machine and try to open the project in CS4 on the other machine and CS4 crashes (after converting to a CS4 project) . I open the CS3 project in CS3 on this new machine and all is well. Everything is fine and a save as a new name.
    Again, I try to open in CS4 and it crashes (after converting to a CS4 project). So I start CS4 again and this time I try to start a new project. So far so good until I try to import a clip that was captured using CS3. Crashes again.
    Next, I open CS4 and start a new project and import both a .psd and a .mov file successfully. Then, I open an old .avi DV clip from some other project back in CS1 days. It too bombs off CS4.
    Next, I export from the CS4 project the timeline with the .psd and .mov clip as a DV avi file using media encoder. Then I import the resulting file back into CS4 and CS4 again crashes. So it won't even import its own footage created in CS4!
    Any ideas what is happening to me? This is the first project that I have used CS4 for other than some slide shows with still graphics.

    i Who is asking here? Weren't you the one with a question and were you not the one asking for help?
    Harm, yes I was asking for help and you have yet to offer any, have you? Please show me one post where you were offering any help. Your first post was obviously designed to be nasty and I have been trying to defend myself ever since.
    I am sorry that you did not grasp the importance of trying to export from CS4 to see if CS4 can read its own files. (This is not my normal work-flow, although sometimes I do do this to avoid rendering an entire clip with effects that is adjoined to another clip with a transition.) But if you cannot understand why I did that after unsuccessfully trying to import CS3 dv avi footage and cs1 DV footage, I cannot possible explain it to you without a conversation with you.
    If you do not have the capabilities to understand my rational for this type of problem solving and you have nothing to add but "buy a PC", please just refrain from posting on my threads. That is all that I ask. If you don't want to or cannot help, then don't post. If you think that I am an idiot and feel that it is necessary to tell me, don;t. I might not be the sharpest hatchet in the woodshed, but I do not need you to tell me this. Haven't we been to this dance before?
    i Why would you want to export with AME to import again? How did you export with AME without importing first? That makes no sense. What happens when you use a more common work-flow, import the AVI into a project?
    All of these questions were answered in the very first post.
    i On this forum you are dependent on fellow editors to spend their time and effort to help you. If you need help, do give the relevant information. There have been a number of posts on what info is required to help us help you.
    I agree, I thought that I had given the relevant information. Honestly, I forgot that the forums had been combined for Mac/Win. I erroneously assumed that this was just a windows only forum. If there is a standardized form that include all of the specs that are required for editors to help, I'd be happy to fill it out and post it in the first post of any thread that I start. Until someone takes this initiate to design a standardized form, I do not think that its too much to ask for people to ask if they think that it might be relevant or simply not post on threads where users do not provide your minimum level of information.
    But I also believe that people who do decide to post should be required to attempt to be helpful. I do not believe that a post that ends with the statement that one should have purchased a PC qualifies in any way as trying to being helpful evn if it were understandable that that I was using a MAC.
    Do we need to continue this? If so, I think that we are going to have to exchange phone numbers so this does not go on forever.

  • Error in opening the PDF file created from the smart form output.

    Hi All,
    i have a simple smart form which takes 3 values like customer no, name and no of times customer called and gives an out like
    Customer 0001000000 with name Ravi called 5 times today.
    I have to send this output to mail as an attachment.
    for this i am coding as below.
    ******Call the SSF Function module
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    formname = Form name
    VARIANT = ' '
    DIRECT_CALL = ' '
    IMPORTING
    fm_name = lv_fmname
    EXCEPTIONS
    no_form = 1
    no_function_module = 2
    OTHERS = 3
    lv_partner_number = '0001000000'.
    lv_name_org1 = 'Ravi'.
    lv_z_no_calls_day = '5'.
    lw_ctrlop-getotf = 'X'.
    lw_ctrlop-no_dialog = 'X'.
    lw_compop-tdnoprev = 'X'.
    lw_compop-tddest = 'LP01'.
    *******Call the Form Function module and get the OTF of form output
    CALL FUNCTION lv_fmname
    EXPORTING
    name_org1 = lv_name_org1
    partner_number = lv_partner_number
    z_no_calls_day = lv_z_no_calls_day
    control_parameters = lw_ctrlop
    output_options = lw_compop
    user_settings = ' '
    IMPORTING
    job_output_info = w_return
    EXCEPTIONS
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    OTHERS = 5.
    i_otf] = w_return-otfdata[.
    *********Now here if i look in to the OTF data i got in debug it has the data i aniticipated along with some other data.
    the output is in the format
    TDPRINTCOM(2) TDPRINTPAR(70)
    ST XXXX.. customer 0001000000 with
    name.....
    i have my data in the above format spread in three lines of the output otf table where XXXX... is some number.
    ***********To convert to PDF Format
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
    format = 'PDF'
    max_linewidth = 132
    IMPORTING
    bin_filesize = lv_len_in
    BIN_FILE =
    TABLES
    otf = i_otf
    lines = i_tline
    EXCEPTIONS
    err_max_linewidth = 1
    err_format = 2
    err_conv_not_possible = 3
    err_bad_otf = 4
    OTHERS = 5
    *********For testing purpose i created a file on the desktop with the the data in i_tline. it created PDF file but when i tried to open it it's giving an error.
    i_objtxt = 'test with pdf-Attachment!'.
    APPEND i_objtxt.
    DESCRIBE TABLE i_objtxt LINES v_lines_txt.
    READ TABLE i_objtxt INDEX v_lines_txt.
    wa_doc_chng-obj_name = 'Smart Form'.
    wa_doc_chng-obj_descr = 'Frequent Caller Alert_Day'.
    wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
    *********Creating the Entry for the document
    CLEAR i_objpack-transf_bin.
    i_objpack-head_start = 1.
    i_objpack-head_num = 0.
    i_objpack-body_start = 1.
    i_objpack-body_num = v_lines_txt.
    i_objpack-doc_type = 'RAW'.
    APPEND i_objpack.
    i_objbin] = i_tline[.
    DESCRIBE TABLE i_objbin LINES v_lines_bin.
    READ TABLE i_objbin INDEX v_lines_bin.
    i_objhead = 'Frequentcaller list_Day.pdf'.
    APPEND i_objhead.
    ************Creating the entry for the attachment.
    CLEAR : i_objpack.
    i_objpack-transf_bin = 'X'.
    i_objpack-head_start = 1.
    i_objpack-head_num = 1.
    i_objpack-body_start = 1.
    i_objpack-body_num = v_lines_bin.
    i_objpack-doc_type = 'PDF'.
    i_objpack-obj_name = 'ATTACHMENT'.
    i_objpack-obj_descr = 'FCA'.
    i_objpack-doc_size = v_lines_bin * 255 .
    APPEND i_objpack.
    CLEAR i_reclist.
    i_reclist-receiver = 'mail id'.
    i_reclist-rec_type = 'U'.
    APPEND i_reclist.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = wa_doc_chng
    put_in_outbox = 'X'
    commit_work = 'X'
    TABLES
    packing_list = i_objpack
    object_header = i_objhead
    contents_bin = i_objbin
    contents_txt = i_objtxt
    receivers = i_reclist
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    operation_no_authorization = 4
    OTHERS = 99.
    This is all i am doing.
    It is sending a mail with the attachment but we are not able to open the attachment. it's giving an error like file is damaged and couldn't be repaired.
    I serched in the forum but i couldn't get the answer.
    I suspect there is a problem in getting the OTF data..
    Please help me in resolving this issue....
    Thanks in advance.
    RK

    Check the sample , and see where you made the mistake.
    REPORT ZPDF_MAIl.
    DATA:
      w_fm_name      TYPE rs38l_fnam,
      w_bin_filesize TYPE i,
      w_filesize     TYPE i,
      w_lines_txt    TYPE i,
      w_lines_bin    TYPE i.
    DATA:
      wa_ctrlop   TYPE ssfctrlop,
      wa_outopt   TYPE ssfcompop,
      wa_objhead  TYPE soli_tab,
      wa_buffer   TYPE string,
      wa_doc_chng TYPE sodocchgi1.
    DATA:
      BEGIN OF t_mail_ids OCCURS 0,
        mailid TYPE ad_smtpadr,
      END OF t_mail_ids,
      t_otfdata TYPE ssfcrescl,
      t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
      t_pdf_tab TYPE tline OCCURS 0 WITH HEADER LINE,
      t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
      t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      t_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = 'Z195_TEST'
      IMPORTING
        fm_name            = w_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    IF sy-subrc EQ 0.
    ENDIF.                               " IF sy-subrc EQ 0.
    wa_ctrlop-getotf = 'X'.
    wa_ctrlop-no_dialog = 'X'.
    wa_outopt-tdnoprev = 'X'.
    CALL FUNCTION w_fm_name
      EXPORTING
        control_parameters = wa_ctrlop
        output_options     = wa_outopt
        user_settings      = 'X'
      IMPORTING
        job_output_info    = t_otfdata
      EXCEPTIONS
        formatting_error   = 1
        internal_error     = 2
        send_error         = 3
        user_canceled      = 4
        OTHERS             = 5.
    IF sy-subrc EQ 0.
    ENDIF.                               " IF sy-subrc EQ 0.
    t_otf[] = t_otfdata-otfdata[].
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
        max_linewidth         = 132
      IMPORTING
        bin_filesize          = w_bin_filesize
      TABLES
        otf                   = t_otf
        lines                 = t_pdf_tab
      EXCEPTIONS
        err_max_linewidth     = 1
        err_format            = 2
        err_conv_not_possible = 3
        err_bad_otf           = 4
        OTHERS                = 5.
    IF sy-subrc EQ 0.
    ENDIF.                               " IF sy-subrc EQ 0.
    LOOP AT t_pdf_tab.
      TRANSLATE t_pdf_tab USING '~'.
      CONCATENATE wa_buffer t_pdf_tab INTO wa_buffer.
    ENDLOOP.
    TRANSLATE wa_buffer USING '~'.
    DO.
      t_record = wa_buffer.
      APPEND t_record.
      SHIFT wa_buffer LEFT BY 255 PLACES.
      IF wa_buffer IS INITIAL.
        EXIT.
      ENDIF.
    ENDDO.
    t_objtxt = ' To Change the COR, Use the Transaction ZCOR_CHANGE'.
    APPEND t_objtxt.
    t_objtxt = ' Check the Attached PDF file for COR'.
    APPEND t_objtxt.
    DESCRIBE TABLE t_objtxt LINES w_lines_txt.
    READ TABLE t_objtxt INDEX w_lines_txt.
    READ TABLE t_objtxt INDEX w_lines_txt.
    wa_doc_chng-obj_name = 'COR Display'.
    wa_doc_chng-expiry_dat = sy-datum + 10.
    CONCATENATE 'COR' "w_cornr
                '-' "w_stat_descr w_action_desc
           INTO wa_doc_chng-obj_descr SEPARATED BY space.
    wa_doc_chng-sensitivty = 'F'.
    wa_doc_chng-doc_size =  w_lines_txt  * 255.
    CLEAR t_objpack-transf_bin.
    t_objpack-head_start = 1.
    t_objpack-head_num = 0.
    t_objpack-body_start = 1.
    t_objpack-body_num = w_lines_txt.
    t_objpack-doc_type = 'RAW'.
    APPEND t_objpack.
    t_objpack-transf_bin = 'X'.
    t_objpack-head_start = 1.
    t_objpack-head_start = 1.
    t_objpack-head_num = 0.
    t_objpack-body_start = 1.
    DESCRIBE TABLE t_objbin LINES w_lines_bin.
    READ TABLE t_objbin INDEX w_lines_bin.
    t_objpack-doc_size = w_lines_bin * 255 .
    t_objpack-body_num = w_lines_bin.
    t_objpack-doc_type = 'PDF'.
    t_objpack-obj_name = 'COR'.
    t_objpack-obj_descr = 'COR Test'.
    * concatenate 'COR' w_cornr into t_objpack-obj_descr
    *                           separated by space.
    APPEND t_objpack.
    *LOOP AT t_mail_ids.
      CLEAR t_reclist.
      t_reclist-receiver = 'INTENATEMAIL'.
      t_reclist-rec_type = 'U'.
      APPEND t_reclist.
    *ENDLOOP.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = wa_doc_chng
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = t_objpack
        object_header              = wa_objhead
        contents_bin               = t_objbin
        contents_txt               = t_objtxt
        receivers                  = t_reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    IF sy-subrc EQ 0.
    ENDIF.

  • Cannot open an idml file created in CS5.5 in either CS5 or CS5.5

    I have exported a CS5.5 file to idml but I cannot get it to open in either CS5 or CS5.5. Below is a screenshot of the error I get in both versions.
    I have tried getting rid of all 3rd party plugins and resetting preferences to ID defaults in both CS versions but I always get this error. This testtest doc is a new file opened in CS5.5 with a text frame and a few words in 'Basic Paragraph' style and that is it. I checked for updates for both versions and there were none.
    Does anyone have any ideas?
    Thanks,
    Janine
    IDCS5 v7.04.553
    IDCS5.5 v7.5.2.318
    OSX 10.6.8

    Could you please email the file to me?
    Received.
    I have seen this problem before. I do not know what causes it (I suspect a corrupt InDesign installation), but I do know how to fix it.
    IDML files are .ZIP files containing XML.
    Inside the IDML file there is a file called "designmap.xml". In your case, it starts (ok, line 2) like this:
    <?aid style="50" type="pi_for_SaveBackINX" readerVersion="6.0" featureSet="257" product="7.5(142)" ?>
    But typically it would look like this:
    <?aid style="50" type="document" readerVersion="6.0" featureSet="257" product="7.5(142)" ?>
    The difference is sufficient to cause it to not be properly parsed.
    So, to fix this problem, you can rename the .IDML file to .ZIP, unzip it, edit the designmap.xml changing pi_for_SaveBackINX to document, re-zip it, and rename it back to IDML. (Make sure not to change the directory structure when you do this.)
    Edit: Oops, forgot to include the evidentiary screenshot:

  • Can open .pdf files in Chrome but cannot open the same file after saving it.

    Description:
      A problem caused this program to stop interacting with Windows.
    Problem signature:
      Problem Event Name:          AppHangB1
      Application Name:          AcroRd32.exe
      Application Version:          11.0.3.37
      Application Timestamp:          518e18e3
      Hang Signature:          99d4
      Hang Type:          0
      OS Version:          6.1.7601.2.1.0.256.1
      Locale ID:          1033
      Additional Hang Signature 1:          99d4b1f941b223144a152a1173c0a0ff
      Additional Hang Signature 2:          01f5
      Additional Hang Signature 3:          01f554accbda5b57fa70e2256b021236
      Additional Hang Signature 4:          99d4
      Additional Hang Signature 5:          99d4b1f941b223144a152a1173c0a0ff
      Additional Hang Signature 6:          01f5
      Additional Hang Signature 7:          01f554accbda5b57fa70e2256b021236
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Thanks Pat.  Tried each, restarted computer each time; tried the "Accept" routine several days ago - it worked briefly and then stopped.  Uninstalled Reader and Flash as well.  Strange thing with Flash, one of my online broker programs provides streaming of CNBC.  When I clicked on the CNBC option to initiate CNBC, I got a message saying that I needed to load Flash.  I did, and it loaded again with no mention of Flash having already been installed.
    Using Internet Explorer works, as well as, clicking on the .pdf file within Windows Explorer (WE).  Expanding the window in WE makes it large enough to read.  I would still like to find a way to open the files as they are designed to open.
    I have done all of the Adobe updates as they have been presented.  Microsoft updates load automatically, and restart my computer in the process.  I do not look to see what the updates have been.  I figure if there was not a need, Microsoft would not make the updates.
    [private data removed]

Maybe you are looking for

  • Photo Printing from Networked Windows 7

    My HP Photosmart Printer is  USB connected to a Windows XP machine which is directly attached to the home network.  Also have a Windows 7 64 machine  wirelessly connected to the home network.  The Photosmart printer was added to the windows 7 machine

  • '#' unexpectedly inserted into output fields in script print preview

    Hello Experts, I came across a problem that confused me so much that when i try to see the print preview of a script form, the output fields in Main window were all printed with '#' inserted, as below: the output is like 7#8#0#0#0#....but it should b

  • Problems with query while transporting

    Dear all, I have transported some queries from the development system to the production system. The transportation ended with the following warnings: Execute reports for change/transport request: DBWK900095    on the application server: kblbw There a

  • Thai language on iPod mini

    hello, I listen to some Thai songs writen in Thai language. in iTunes the characters are shown properly. but as soon as I load it on my mini, it´s just some cryptic signs. does anyone of u have an idea how I could install Thai language on my mini? wo

  • PS4 crashes when I use the crop tool

    I have CS4 Design Standard and it is loaded on my IMAC and Powerbook.  When I use PS4 on my imac and use the crop tool, it just hangs up and I have to shutdown and restart.  However, it works perfectly on my powerbook.  Any suggestions?