Cannot open the templates in Open Office with Firefox 7

I just upgraded to FF7 & notice I cannot open the templates in Open Office using the 7 upgrade.. FF did have an extension out there "OpenOffice.org Menu 1.2.1" but it does not work with 7.. So now what ? I have Open Office & it works fine but if I want to open & use any of the templates I'm out of luck..

AFAICT, Office 2004 apps don't support the Services architecture. Peruse the newsgroups at http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups for more information.

Similar Messages

  • Emails in my Inbox (both "Read" and "Unread") are all displayed in BOLD type - cannot tell the difference. Problem began with Firefox update. Problem does not occur with Internet Explorer.

    Problem occurs with several different e-mail accounts. GoDaddy e-mail, aol, Yahoo mail

    Hi,
    this can be related to the compression of the PDF file.
    You can turn off the FlateDecode compression again via report RSTXPDF3 as described in Note #843480. It is a little confusing. The option 'FLATE_COMPR_OFF' needs to be set to 'On' to turn off the FlateDecode compression.
    To set this please run as follows:
    se38 -> RSTXPDF3 -> enter 'FLATE_COMPR_OFF' in the 'Name' field -> Select 'Change Settings' radio button
    You will get a pop-up 'Do not use flat compression'.
    Select the 'on' button.
    After this check if the PDF is created correctly.
    regards,
    Aidan

  • I have Microsoft Office X on my Imac with OS 10.6, I cannot get the Ctriilic font in office to work in word or excell. Where do I get the cyrillic font to work in word/excel

    I have Microsoft Office X on my Imac with OS 10.6, I cannot get the Ctriilic font in office to work in word or excell. Where do I get the cyrillic font to work in word/excel

    "Could you explain where you think you have to pay something?"
    I signed up for the site and posted a question their response was that they had an answer and they required credit card imformation.
    "If your problem is to read existing Excel files, then I am very surprised that OpenOffice would not open them.  If you could send me one or provide a url I could see what the problem is (tom at bluesky dot org)."
    I can down load the files just fine and they open. the numbers in the documents will display but text will not what I get is this : "__________" where there should be text.
    Try this site and download the the Doc (rar). it will open on my computer as an excel file but there will be no text just "__________" Open office will not open this file, but excel will.
    http://militera.lib.ru/h/sovaviation/index.html

  • Unable to open the Projects from Project center with the Alias name PWA 2010

    Hi,
    I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is  project server 2010,
    My system is ABC.DC.IN  alias name i have given is DEF.AD.COM  
    With the system name i can able access PWA and all are working fine.
    As i have observed with alias name i can able to login to  pwa and all the server  setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
    is coming in the below of the ie. 
    But with Alias name these are the issues i am facing,
    1.when longing with alias name its asking two times for user name and password
    2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
    3. I have observed one more thing if click on Project details then only this issue  is coming project schedule and project information is also opening with Alias name.
    can any one Help me. 
    Vijay kommireddi

    Hi
    Hope the below link will help you.
    And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

  • I won Lightroom 1.0 a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    I won Lightroom 1.0 as a door prize a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    Thanks for replying, Jim. I wasn't planning to use it for raw images. I shoot film, black and white, and have many negatives I want to print. I am unfamiliar with the upgrades in Lightroom. I wasn't unhappy with the version I have. It was useful for my purposes.
    Because it was a few years ago, I don't remember if I registered the product. I was able to login to my account. But could not find a path to communicate with Adobe. I will keep trying.
    Ken

  • I can't open the templates on my Stationery Set app

    I bought the Stationery Set app and can't open any of the templates.
    When I click the open template button this comes up:
    Last login: Sat Jan  7 10:55:55 on ttys000
    Allys-MacBook-Air:Ladybug.template allydrotar$
    How do I open the template so I can use it?

    weird is right, but what do we do ???
    i have a similar problem.
    when i press the lock to unlock it, it asks me for the password and than showes it as unlocked.
    but even after that, it wont let me change any prefrences or setting.
    meaning if i want to tweak with something, it just wont let me check or uncheck the setting.
    who do i go to for a solution?

  • Unable to open the TEMPLATE.fmb

    I installed form 6i and copied the standard (15) plls into c:\pllss directory and included that in the FORMS_PATH in the registry and when i open the template.fmb i still get the error messages that unable to load the plss. Please let me know what else need to be included.
    Thanks....RR

    Thanks some body for suggestions. I had the similar error. I was not able to open a request template with this error.
    <ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase INVOKE_APPLICATION 5
    oracle.iam.platform.utils.MinLimitException: size < minimum limit
    at oracle.iam.platform.canonic.model.Values.setMinLimit(Values.java:187)
    at oracle.iam.requesttemplate.agentry.operations.OpenActor.renderAttributeRestrictionsTab(OpenActor.java:822)
    at oracle.iam.requesttemplate.agentry.operations.OpenActor.prepare(OpenActor.java:195)
    This was the issue Request restriction was issue.In the Request Template table, in template date. The data was supposed to be
    - <entity-type name="User">
    - <attribute-restrictions>
    - <attribute name="Organization">
    <values>4</values>
    <values>5</values>
    </attribute>
    </attribute-restrictions>
    </entity-type>
    instead it was
    - <entity-type name="User">
    - <attribute-restrictions>
    - <attribute name="Organization">
    <values>ABC</values>
    <values>BBC</values>
    </attribute>
    </attribute-restrictions>
    </entity-type>
    Only god knows how it was changed.
    After changing the string ABC, BBC to their act_keys , restart and clear the cache it works.
    Can you imagine . wow .. so strange
    Thanks buds

  • When using a template the 'Save As' opens the templates folder to save to, not the last used folder

    I used to open a file from the templates folder,
    add details then click 'Save As' to save it the folder I was using.
    Now I have downloaded Fireworks CS6 it always opens the 'Templates' folder when I click 'Save As'
    I don't want to make a new template each time,
    I want it to open the folder I was last using.
    I have tried uninstalling and reinstalling but I can't get it to open the folder I was last using whan I click 'Save As',
    which is what it did before when I was using Fireworks CS5.
    Are there any Settings to change this?
    Of course I can click 'Recent Places' but it was easier before when the right folder to save to just came up first time.

    Saved files seem to remember their last saved location. So if you create a new file based on a Template, the first time you choose Save As, the location of the source (template) file will appear. However, once you've saved the file to a new location, that new location should become the new default for any subsequent iterations of that file.
    New files (not created from a template) pick up the location of the last saved file.
    All this is to say, the file saving issue you're experiencing should only be a problem the first time you save a file based on a template. Every time you open that file afterward, it should default to its current folder location. But yes, every time you create a file based on a template, the default location will be the Templates folder. If this feels like a big problem, I believe you have the option of opening a template file from any location... so you could copy or move the template into a more desireable folder location, and create your new file(s) based on the template in that location.
    Hope this gives you some ideas!

  • We are facing issue to open a static form PDF in Chrome Browser , which is loaded using Adobe FormService.Able to open in other browsers but not able to open the static forms in chrome with LC 11.0 version

    We are facing issue to open a static form PDF in Chrome Browser
    , which is loaded using Adobe FormService.
    Able to open in other browsers but not able to open the static
    forms in chrome with LC 11.0 version
    Below error message:
    The document you are trying to load
    requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
    or your viewing environment may not be properly configured to use Adobe Reader.
    For information on how to install Adobe Reader and configure your viewing
    environment please see http://www.adobe.com/go/pdf_forms_configure.
    Please let us know do we have any option for disabling
    <NoXFA/> tag by calling formService. RenderPDF() method on adobe service
    For dynamic forms its working by adding <NOXFA/> in
    DDX xml . only for static forms its not working because we are not using
    assembler service for this forms.
    Please let us know how we can disable XFA in static forms??????????????????

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • I'm considering buying CC LR/PS package. My camera is Sony a7 - raw ARW. I've been editing using PSE10 and ver 8.7 of the external Adobe DNG converter. Will I be able to open the DNG files in LR with the edits preserved? Will I be able to open the PSD fil

    I'm considering buying CC LR/PS package. My camera is Sony a7 - raw ARW. I've been editing using PSE10 and ver 8.7 of the external Adobe DNG converter. Will I be able to open the DNG files in LR with the edits preserved? Will I be able to open the PSD files in LR with the edits preserved? Any import/catalog etc issues between PSE10 and LR?

    Lightroom has no problem reading DNG files. Whether the edits you have done to the DNGs you have originally edited in Photoshop Elements 10 I'm not sure. ACR edits made to DNGs are saved in the DNG file itself, as apposed to a XMP sidecar file, so LR should see those edits. At the worst you will get an exclamation mark in the upper right hand corner of the imported DNGs and clicking on that exclamation mark you will get a dialog box asking you to either import settings from disk or overwrite settings. you would select import settings from disk.

  • When i open an irc link with a channel name that contains "~" at the end, firefox (14.0.1) opens the same channel name but with "%7E" instead of "~" at the end

    when i open an irc link with a channel name that contains "~" at the end firefox (14.0.1) opens the same channel name but with "%7E" instead of "~" at the end
    http://img835.imageshack.us/img835/2856/clipboard05nq.jpg

    I can not open the image, but I can say something in general about the tilde.<br>
    The tilde "~" is an unreserved character and therefore it can be replaced by its percent-encoded form "%7E" inside a URI without changing meaning. See<br>
    http://en.wikipedia.org/wiki/Percent-encoding<br>
    According to section 2.3 of RFC3986 we should prefer the unencoded form so this behavior seems to be a bit out-dated.<br>

  • I can open the other website but not with twitter, there's a lock icon on the top beside the word twitter, what should i do?

    i can open the other website but not with twitter, there's a lock icon on the top beside the word twitter, what should i do?

    yes,safari
    if I add twitter to my homescreen so if I open it,the title twitter appear on the top
    but can't run,and there's a lock icon beside it,
    and I try to open tumblr too but it's can run and no lock icon besides

  • My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call  i recive massege and the device donot close by itselfe

    My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call  i recive massege and the device donot close by itselfe

    LadySarah
    You cannot upgrade from v6 to v7 without purchasing iLife 08.
    Can you give more details about your crashing issue. Make of camera etc.,
    You can start with the troubleshooting basics:
    1. Repair Permissions using Disk Utility
    2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
    3. Create a new account (systempreferences -> accounts), create an iPhoto library there and see if the problem is repeated. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD
    Regards
    TD

  • 10.5.2: You cannot use the application "System preferences.app" with...

    Hello
    after (successfully) updating from 10.5.1 to 10.5.2, the System Preferences.app cannot be started. Either the application does not start (a silent error) or there is a message "You cannot use the application "System preferences.app" with this version of MacOS X." The version is 10.5.2, according to "About this Mac", while the application version is 3.5. The same happens when I attempt to open "Time machine preferences" using the new menu/icon on the bar.
    Any help is appreciated.
    Thanks in advance,
    Marinho.

    Thanks, I did that, but it didn't solve the problem.
    By the way, the application version (of System preferences.app) remained the same (old one). Then I removed the application to Trash (meaning to restore it later if required) and applied the update again (and a third time), but then a new System preferences.app was not installed and the older one has disappeared from the trash! What a mess this update turns out to be...
    Marinho.

  • Error: Failed to open the connection when opening Crystal Report in CMC or

    Hello all,
    I am getting theError: Failed to open the connection when opening Crystal Report in CMC or Infoview
    with access database as the datasource which is in the network drive.

    Hi Sonali,
    This is because Crystal Reports does not recognize database connection from share drive
    1. Save the database locally on server machine
    2. Create a new database on server and link the new database with the database on Network.
    Steps to link the database.
    1.Create a new test database on server.
    2. Go to File --> Get External Data --> Link tables | Select the database on Network Drive.
    3. Select all the tables from the database.
    4. Save the Database  e.g. Test.mdb.
    5. Create an ODBC Connection on server machine, with the same name as on client machine using test.mdb database.
    Note: Click on Advanced button, enter the default user id and password for the odbc connection, it is not mandatory to give Login Name and Password, only if the user id and password are given then we need to provide the same user id and password in the CMC database configuration.
    6. Create a report using this ODBC connection, and save the report to Enterprise.
    Regards,
    Navin

Maybe you are looking for