Cannot open the Time Machine Preferences

I'm running into this new problem after upgrading a client MBP to 10.6.2.
I get an error message when trying to open the Time Machine Preferences:
The document "TimeMachine.prefPane" could not be opened. System Preferences cannot open files in the "Mac OS X Preference Pane" format.
Has anyone seen this?
I'm using Time Capsule for the backups. It is setup to extend a network with another Time Capsule.
Thanks

shellie619 wrote:
Time machine stopped working - my Mac is a problem in itself. I need to do a backup before I take my Mac to Apple to fix - so I try to go into Time Machine Preferences and I get the error message: You cannot open Time Machine preferences because it doesn't work on an Intel-based Mac. - ***???
Any suggestion please - I am down to the wire and need the backup today.
Hi, and welcome to the forums.
That's a new one. It sounds like something has been copied from a PPC Mac, or something's been corrupted so badly it looks like that's where it came from.
Can you do a +Back Up Now+ from the TM icon in your Menubar?
If, as you say, TM "stopped working," you'd have to figure out why and fix it, anyway.
Can you make a partition on your TM disk that's at least 10% larger than the data on your internal HD? if so, your best bet might be to download CarbonCopyCloner. It will make a full bootable "clone" of your entire system on a separate partition. It's donationware, available at: http://www.bombich.com/software/ccc.html

Similar Messages

I try to backup my Lacie Rugged Thunderbolt with my Time Capsule but the Lacie is not active (grey) in the Time Machine preferences. Why ?

I try to backup my Lacie Rugged Thunderbolt with my Time Capsule but the Lacie is not active (grey) in the Time Machine preferences. Why ?

@LaPastenague
Morning / Afternoon.
We may have an unfair advantage in that the Internet gets here faster than it does "down there".

I can see my backups but there is no info in the Time Machine preferences

I recently upgraded to Lion and everything seemed OK with Time Machine but now when I click "Enter Time Machine" I can see the backups but when I open Time Machine Preferences I see "Oldest Backup: None" and "Latest Backup: None"
I have not made a new backup in fear of deleting my old backups!
I have also had some problems connecting to Time Machine — I have had to reboot Time Machine more than once and reboot my Mac Book Pro in order for the computer to see Time Machine.
All this only started after installing Lion!

I talked to AT&T and Apple. ATT says its the phone and Apple says its not the phone.

HT201514 cant open time machine preferences from help page

I just purchased a new I MAC and I am trying to connect my new mack with the time machine I bought with my old mac
I have been to help trying to gain access to the time machine preferences so I can make changes. But when I click on the
help high lighted Open time machine preferences. What am I missing here. the computer seems to have found the time machine
but I cant make the changes I want to , or chk to see about deleting backups.
thanks
navbob

See the green box in Time Machine - Frequently Asked Question #19.

After servicing my laptop recently, I can no longer find the time machine back up disk

I recenty had my macbook pro serviced after the hard drive cable was broken. Upon return, when I attempt to back up to time machine it says backup disk not available and I cannot find any disks to select in time machine preferences. Any idea how to fix this?

aimehunter,
if you had Time Machine running without connecting an external drive directly to your MacBook Pro, then it must have been a wireless connection to an AirPort Time Capsule.
Open the Time Machine pane in System Preferences. Does it show that you have a destination drive selected there? If not, press the Select Disk… button to select your AirPort Time Capsule drive. After that, select Back Up Now from the Time Machine icon in your menu bar to restart your regular Time Machine backups.

I have reinstalled my OS without time machine (using the disc). I want to restore some pictures in the iPhotos which are already in the time machine i was using previously. How can I restore iPhoto from previous time machine?

My mac book was incredibly slow. When I went to Mac store, they asked me to reinstall the OS with CD and not with the time machine. I reinstalled the operating system. But when I opened the applications, all those started as fresh applications as usual. I have the backup of all other data in another hard disc. But unfortunately, I forgot to copy the photos before reinstallation. I have those photos in my time machine back up. But when I opened time machine, it started like a fresh (very new) time machine and it started backing up my present OS (the reinstalled one). I cannot open the previous time machine, which is in the same hard drive. I wish to open the previous time machine to get the photos which are backed up previuosly. When opened the time machine disc (manually by clicking the icon), i can see all the thigs which I had previously in my macbook. But unfortunately, i cannot access those through time machine! Can anybody help me please?

How to redownload purchased apps from the App Store

I have changed the name and password for my Time Capsule and now the Time Machine will not connect

Mac Book Pro
1TB Time Capsule.
Yesterday I changed the name and password on my time capsule and also the name and password of the wifi network as I was having problems with the speed of the internet when using Safari on any of my devices (1 Macbook pro, 1 macbook air, 27" iMac, iPhone and iPad) all other internet services were working fine (email etc.) This seems to have solved the problem.
However, since then, my time machine back ups will not reconnect and there is no option for me to reconnect to the existing back up for my macbook pro.
When I enter the time machine preferences it shows as below that there are no back ups.
Then, when I go to select a drive to use which should be the MacBook under the Backup disks the only option is for me to Remove Disk...
So, my question is, how do I reconnect to an existing Time Machine back up for my MacBook pro as I really do not want to erase and start all over again.
Warning - In my naiveté, I did click on the MacBook in 'Available Disks' but I got the impression that it was about to start a whole new back up and not work with the existing one.
(And does anybody have an inkling as to why there was a problem with Safari on all my devices? I downloaded Google Chrome and that worked fine).

Simply reset the Time Machine.
See A4 here http://pondini.org/TM/Troubleshooting.html
You can then mount the TC disk in finder after you reboot the computer.
You should be able to reselect the TC disk and then it will say it is going to start a new backup.
Ignore this.. when the TM actually loads the TC disk it will discover the existing backup and continue the backup.. but it will give no hint until it actually starts that it won't start a new backup. you just have to believe it won't.. and mostly it works..
Please also install the widget A1 so you have some idea what TM is doing.

Cannot access older time machine backups

I recently installed a new SSD in my MacBook and after reinstalling OSX Mountain Lion I chose to restore from a time machine backup. Everything went smoothly and all my files were restored. However, I tried to access a backup from before my restore but it's not showing it as being available even though the Time Machine preferences confirm that my oldest backup is from June 2011 and I can still access the folders that far back via finder. But I've never had this happen. Why it because its a new hard drive? Was it because of the recent 10.8.3 software update? Was it because of the "restore from time machine backup"? Every time I had done a clean install I just copied over the critical folders such as documents and itunes from my drive, never used the restore feature. My files clearly aren't gone, but I'm curious as to why this happened. Please help. Thanks in advance.

Have you done a new backup yet? If not, yes, Time Machine is looking for the backups on a different disk. As mende1 says, the procedure in #E3 should let you see them.
Once you start a new backup, Time Machine should automatically "associate" the new drive with the old backups, only do an "incremental" backup of the changes, and treat the old backups as if they'd been made from the new drive.
If not (ie, if it starts doing a full backup), you may be able to cancel the backup and do the "associatedisk" yourself, per #B6 in Time Machine - Troubleshooting, especially the pink box there.

How to use the time machine?

how to use the time machine? because i don't know where to find the back up. can you please help me.. thankyou.

Time machine is a backup application and service that come with Leopard. When you plug in an external drive you can use it as a backup source. All you do is select the drive in the Time Machine control panel and start the backup. It will back up your whole drive and if you lose a file, go to the location on your drive where that file should be and open the Time Machine application. From there you will be able to migrate to all the points in "time" when the file was changed, and select the version of the file that you want. Then select "restore" and the file will be restored to the location where it last was on your drive.
For more information check out the Time Machine website:http://www.apple.com/macosx/features/timemachine.html

I cannot get my Time machine to work

I have just bought a 2TB Airport Time Capsule. I cannot get the Time Machine to set up as it states that "A newer version of Airport Utility is required. This version of Airport Utility doesn't support this Airport wireless device and might improperly configure the device if you continue to use it. Check Apple support for the latest version of Airport Utility".
However i'm having difficulty locating the correct update to down load. Any suggestions?
My Imac is OS X version 10.6.8 Thanks

Please review the System Requirements for the new Time Capsule:
System Requirements.......Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
http://www.apple.com/airport-time-capsule/specs/
Since your iMac does not meet the minimum requirements of Lion (10.7.5) to install the new Time Capsule, might you have an iPhone or iPad....or be able to borrow one for 10 minutes.....to set things up that way?

Cannot open 2 Virtual Machines at the same time to access the same Database

Folks,
Hello.
I am installing Oracle Database 11gR2 RAC system using 2 Virtual Machines (rac1 and rac2) on the top of VMPlayer 3.
The VM rac1 and rac2 run correctly when one of them is shutdown.
Their locations are F:\VM_RAC\rac1 and F:\VM_RAC\rac2.
While rac2 is running, I open rac1. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
While rac1 is running, I open rac2. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
The 2 error messages are the same. This means I cannot open 2 VMs rac1 and rac2 at the same time. When we run RAC system, we have to open 2 machines or more than 2 machines at the same time so that all machines can access the same Database Server.
My question is:
Can any folk tell me how to have rac1 and rac2 run at the same time ?
Thanks.

You need to disable disk locking, which ordinarily is performed by the first VM to prevent any other VMs from corrupting your vmdk files via uncoordinated writes. You will have to shutdown both of your VMs and edit the *.vmx flat file for each, adding lines like the following (settings taken from workstation 6, but should be nearly identical settings for VM Player 3.x):
http://crosbysite.blogspot.com/2007/10/clustering-in-vmware-workstation-6.html
scsi1.sharedbus = "Virtual"
disk.locking = "false"
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.dataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "4096"
diskLib.maxUnsyncedWrites = "0"
A few comments:
- your shared disks (scsi1) must be on a separate virtual scsi bus than the boot disk (scsi0), to allow setting the sharedbus flag as seen above.
- you must also ensure the cache parameters and unsynced writes settings are set to guarantee that all IO is immediately flushed to the vmdk file so the other VM can immediately access the latest version of data.

HT1178 I have set up Time Capsule to use with Time Machine. When I open Time Machine it 'cannot find' the Time Capsule and I have the Select the Disk each time. In the Next Backup tab it always says "When disk is connected" even though the disk is alrea

I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.

Your pro doesn't matter.. I presume it is happily working.
Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
This is the most relevant I think. http://pondini.org/TM/B6.html
But look at the whole section B setup problems.
http://pondini.org/TM/Troubleshooting.html
If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
See if you can get Pondini to respond.. !!

Can't open time machine preferences

I just did a clean install of Lion on my macbook pro. I used migration assistant to pull most things over, but not everything. I was going to go into Time Machine to pull out a few documents, when I encountered this error message. I clicked on Open Time Machine Preferences and got: An unexpected error occurred (error code -6584). Does anyone know what this means?

Snowmeister wrote:
"iMovie cannot be opened because of a problem. Check with the developer to make sure iMovie works with this version of Mac OSX. You may need to reinstall the application" - this doesn't make sense, as I have reinstalled OS X)?
Are you re-installing from the original grey DVDs that came with your Mac, or from a retail SL installer? The retail version doesn't include iLife.
The OE discs should have iLife on disc 2, so if that's what you're using you can re-install from there.
As to what CleanMyMac has done, I don't know. To alter the apparent processor signature seems very odd. Maybe some of the other guys around here can come up with a theory.
Cleaning caches is totally unnecessary unless there's a specific problem to address; caches are there to help speed up the Mac. If you clear them, you slow down the Mac until all the various applications and processes have rebuilt their respective caches.
Removing language files can be tricky too. Remove the wrong ones and the System will cease to boot.
Likewise for fonts.
Logs are mostly harmless to clear, but they are there for a purpose too; to help you find the source of problems. In any case, the daily maintenance task built in to the OS does all that's needed in that regard.
Could be that one of those logs may have been able to tell you what that junk did.
Applications > Utilities > Console
Loads of logs in there.

Set computer to lock with password in 5 seconds. now cannot open in time because of the 5 second shutdown. What can I do to now get into my computer??

Set computer to lock with password in 5 seconds. now cannot open in time because of the 5 second shutdown. What can I do to now get into my computer??

I'm not sure which option you set. Requiring the password after 5 seconds in System Preferences > Security only kicks in after the sleep or screen saver. The smallest option for sleep or screen saver is 1 minute.
Which options did you set?

I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. with the Pages app open how do I use the Time Machine to go back five hours to see the work?

I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. With the Pages app open how do I use the Time Machine to go back five hours to see my page? Can I access Time Machine within an app like Pages? How do I enter Time Machine within the application? It always takes me to the Finder. I apolgise for the mumbo jumbo. I simply do not know how to use Time Machine. It makes sense when I follow the Tutorial but then I lose it.

OK. You've kind of skipped over the reason why you want to go back five hours, but my assumption would be that you've made changes to a Pages file that you want to revert.
There are two ways to tackle this. From Pages itself, open the current version of your document, and from the File menu, click Revert To, and Browse All Versions. You'll then be in the Time Machine interface for that file, and can browse back to the version you want.
Or, outside of Pages, you can select the file (or the folder it was originally in, if you've since deleted it) and enter Time Machine from the TM menu (it sounds like you've already tried this?)
best
Matt

Cannot open the Time Machine Preferences

Similar Messages

Maybe you are looking for