Cannot pair new N95 with Mercedes C class comand

The N95 does not detect any bluetooth module in the car
Using a Mercedes code 386 telephone module
My Nokia 6288 work fine phone book and all.
Any advice on how to sort this out would be Great!

Hi toptup
Mercedes Benz supply two Bluetooth plug-in modules:
The HFP variant is only fully compatible with such as N70
The SAP variant is only fully compatible with such as N80 and N95
Triamp Technology Ltd have procduced the Visee0 Bluetooth Module 2000MBU which should reach the UK shortly, which plugs into the UHI interface. This is the successor to the Visee0 1000MBU for pre-2004 6310i cradle vehicles and is expected to be very competitively priced.Message Edited by scoobyman on 03-Nov-200710:04 AM
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Cannot pair iphone 6 with mercedes

I used to use iphone 5 in my mercedes but now cannot pair iphone 6 with my car's bluetooth phone system. Any suggestions?

Hi, nalcioglu.
Thank you for visiting Apple Support Communities.
Here are a couple articles that have some helpful troubleshooting steps regarding car stereo connections and an iOS device.
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Cheers,
Jason H.

IPhone 5s contacts are no longer synching with Mercedes E class command system. It did 3 days ago but no longer synchs my contacts?

My iPhone 5s contacts are no longer synching with Mercedes E class command system. It did 3 days ago but now it longer synchs my contacts - how do I get my contacts downloaded to the command system of my car?

status update -- I tried a lot of other things but finally solved the problem after I removed all the groups from mac address book. (thank-you to my son Ben)
FYI -- along the way I tried doing the reset sync history, which deleted all contacts from the iphone. I initially thought that was a good thing, until I discovered that nothing I tried after that would put the contacts back on the iphone. Next I restored factory settings on the iphone and set up as a new user, but that didn't work either. Or maybe it did; maybe deleting the groups wouldn't have solved the problem if I hadn't deleted all contacts and reset the iphone first.

HT204387 Cannot pair iPhone 5 with Toyota Camry Bluetooth

I cannot pair iPhone 5 with Toyota Camry Bluetooth. Never had a problem with android

Two things that you need to verify first
1. The first step in troubleshooting any accessory is to determine whether the accessory is compatible with the device. Contact your automotive manufacturer or the manufacturer of your aftermarket head unit to see if your iPhone, iPad, or iPod touch model is compatible.
2. Verify that both your car kit and your iOS device are running the latest software versions. To verify that your car kit is up to date, please contact your automotive manufacturer or the manufacturer of your aftermarket head unit.
Also follow the Link. hope this helps.
http://support.apple.com/kb/TS3581
Regards,
Taz

Cannot pair my E51 with my jabra bluetooth ear pie...

I cannot pair my E51 with my jabra bluetooth ear piece.I have paired my wife's phone with my E51, but cannot pair my E51 with my ear piece. Any help would be much appreciated.

sorry... the Bluetooth in the iPhone only works with a Hands Free Headset or Car Kit but not to another phone , not even an iPhone ..

Adding node in navigator for new extension (with Java backing class)

Hi,
I want to add a node to the Navigator window that is implemented by my own Java class.
I can already add a node with XML that executes queries against the database to get the objects that I want.
I now want a "smarter" node that can do more than query the database.
Regards,
Pieter

Hi Sue,
I have already looked on the wiki and there is no information on how to add an own node with a Java class.
There is an example of how to do this with XML and encoding the node and children with SQL embedded in the XML.
This is not what I want - as I mentioned in the post I have already done this but I want to do more by adding my own Java Node object.
Regards,
Pieter

Cannot pair bluetooth speaker with iPhone 6

My JBL Chrome worked perfectly with my iPhone 5. Now the iPhone 6 will not pair with the speaker, yet I'm able to pair the phone with my car (Infiniti Q50).The guy at the Apple store told me it likely is a bug in ios8. Is this true? Do I have to wait for several updates to restore former functionality. I'm disappointed.

I would try to reset the speaker. If you were able to pair it with the iPhone 5, and you activated the 6 from a backup of the 5, the speaker may be "confused" with a device of the same name. Also, the speaker may not be able to pair with more than one device and needs to be reset. Check the speaker's user guide to see how to reset the device and then put it into discovery/pairing mode again. Then attempt to pair with the phone.

Cannot pair BB 9300 with nokia bh-103

Is there an application or solution that will allow me to pair my Blackberry with my Nokia bh-103 headphones?
Best Regards

No one?

Cannot pair new Apple TV with iTunes

Okay I recently got the new Apple TV 160GB model and have it connected to Internet over Wifi. The computer whose iTunes Library I want to pair it with is a 2006 based Intel Mac Mini with Core Duo 1 processor and Mac OS X Tiger 10.4.11 with iTunes 8.2.1 presently installed.
The Apple TV had 2.3.1 installed when it arrived -- tried pairing with iTunes while running Apple TV 2.3.1 on the Apple TV didn't work. Updated to 2.4 still doesn't work. Unfortunately I've been unable to get the Mac Mini to connect to the Internet over my home wireless network and stay connected -- it has connected a few times but shortly loses the connection. Other times I try to connect while disconnected and get errors that it could not connect.
Regardless, the few times I did manage to connect over Wifi my Mac Mini would not recognize my Apple TV (has never been paired with iTunes so has not even been named) we use a Linksys wireless router for wireless Internet.
At times the wireless Internet connection in my bedroom where I keep the Apple TV and Mac Mini has been unreliable -- when using my iPod Touch I also own with Internet access any time I am using it in my bedroom the Wifi access quickly gets lost -- to reconnect have to venture out into the hallway then come back the room and get some Wifi use within the room for about 2 minutes before losing the connection again.
However, my Apple TV in my bedroom once connected has had no problem staying connected to the wireless network neither does the Nintendo Wii I own. Also my new MacBook Pro can connect to the Internet wirelessly within the bedroom and often stay connected -- although a few times even when using MacBook Pro the connection gets lost and I go outside the room and connection is restored.
Anyways even when I manage to get the Mac Mini on the wireless network iTunes is unable to recognize and pair my Apple TV. In the past I have gotten it to recognize my iPod Touch as a wireless remote and use Apple's Remote app and/or the Rowmote Pro app from Apple's iPhone App Store with it -- only recently they aren't showing up either due to connection problems of the Mac Mini accessing the wireless network.
Whenever the Mac Mini does connect to the wireless network it only stays connected a brief time and then is hard to get it to reconnect. Last time it connected I feel I got lucky and I'm not superstitious so I wouldn't believe in being lucky or unlucky.
Anyways, when the Mac Mini has connected wirelessly even then it does not recognize the Apple TV. This Apple TV has never been synced to before or streamed to. The only thing I've been able to use it for so far is accessing iTunes Store on the TV and accessing YouTube.
All my purchases are on the Mac Mini though and don't want to have to re-purchase them from Apple TV and download to it. In any case whether I bought some content from Apple TV or not (would not want to have to re-buy all of it) I should be able to get Apple TV to be recognized with iTunes.
At present the Mac Mini which I'm using to type and send this is connected over a wired Ethernet network and the Apple TV is connected over Wifi. I've tried going into the Firewall and ensuring the port for iTunes Music Sharing is enabled, and UDP port 5353 as noted by an Apple Support document online for Bonjour Networking is enabled. I've tried restarting the Mac Mini but Apple TV just won't show up in iTunes at all even when the Mac Mini was also on the wireless network.

Update: My Apple TV is connected via Wifi but Mini via Ethernet and Mini does not seem to recognize Apple TV unless Mini also has Wifi or unless I run Ethernet cord from Mini directly to Apple TV at which point they are physically connected to each other but neither has Internet.
I think there is a problem with my Mini's Airport card -- yesterday for the first time in over a month I managed to get it to connect wirelessly again and keep it connected for a few hours (during which time Apple TV showed up in the devices list on Mac Mini's iTunes Library) but after that it lost the connection and have been struggling ever since to get it reconnected. Have posted on the Mac Mini, Mac Mini (previous early 2009 models) Internet & Networking with Mac Mini discussion forum by Apple for help and now the Airport Extreme section of Apple Discussions.
Thanks for the help -- I now know this is not a problem with the Apple TV it is likely a hardware issue with Mini's Airport card and as it is out of warranty now would unfortunately have to pay to get it repaired.

Cannot pair my contact with Nokia bluetooth

My new iPhone doesn't pair with my Nokia phone's bluetooth. I need to transfert all my contacts from one phone to another. All my contacts are only in my Nokia phone, not in any computer...
I tried that Microsofl Exchange but it's asking me for server.company.com and I don't know what to write!

sorry... the Bluetooth in the iPhone only works with a Hands Free Headset or Car Kit but not to another phone , not even an iPhone ..

Cannot pair my CENTRO with my PLANTRONICS VOYAGER *** HELP !!!! ***

i was able to pair with my 700 TREO, but am unable to do so with the CENTRO (dropped the TREO in a cup of water - no bueno - and was forced to buy a new phone). I tried EVERYTHING and i mean EVERYTHING and can't seem to get pair these 2 together. i've spent way too much time, and thus am beseeching anyone out there to feel sorry for me and give me the direction i need to get this to work. I did the "nearby devices" selection under Trusted Devices. Didn't work. I tried turning both devices OFF and then turning them on and then pairing. Didn't work. HELP ME!
Post relates to: Treo 700p (Sprint)
This question was solved.
View Solution.

Most BlueTooth devices have very specific instructions to place them into "Pairing Mode". Just turning it off/on will not do this.
Check your manual that came with the Plantronics for these instructions.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Cannot move New Canvas with move tool

I am experimenting with putting 2 images side by side into one canvas and in my friend's computer (a Mac laptop), she can move the canvas. I can't and when I create a new canvas, the 2 images disappear from the layers panel. We both have CS6 and a Mac, but she has a more recent Operating System. Also, when I click on the CS6 icon on my desktop, it doesn't have "Open All Windows" as she has. A total puzzle since we both have Macs and CS6.
Thanks.

Without seeing your screen its hard to determine whats going on. But on a Mac photoshop has the option of having the canvas in its own frame or seperate which allows you to see other apps that are running.
Normally the move tool does not move the canvas. It will move objects and layers though. The hand tool is used to move the canvas. But only when you are zoomed in beyond 100%.
If I am miss-interpreting your post, I appologize and will need further information to alter my advice.

Can't pair new iPhone with Subaru Outback 2014

I am having problems connecting my phone to the Bluetooth on my Subaru Outback 2014. The music works on the BT Audio but the phone doesn't. I keep following the instructions to pair phone and it times out. I now have the iPhone 5S. Worked fine with my old iPhone. Thoguhts???

My wife and I have dueling 2012 Outbacks. She has the iPhone 5S with no problems; I have the iPhone 6 with problems. Before 8.1, I couldn't get them to pair at all. Once 8.1 came along, I could pair them successfully but had to re-pair them every time I started the car...a nuisance.
Anyway, the FIX is to pair them using the controls on the steering wheel...NOT the controls on the radio.
Once I did that, the car 'remembers' the phone.

Cannot pair my IPhone with iPad 3 using Bluetooth

I bought a wireless music system and my iPhone 5 is pairing with it using Bluetooth but my iPad 3 is not. They are also not pairing with each other. What I am doing wrong

You can't. It can only be done through iTunes.

Cannot pair Nokia E62 with Address Book

I could not pair my Nokia E62 with Address Book after updating to 10.4.9 and decided, along with other reasons, to erase and install my OS. After all the updates were finished, I ended up with the same result. iSync recognizes my phone and works properly, however, Address Book will not pair no matter what I do. If you have any suggestions, I would greatly appreciate it!
Thank you,
Rybo

It appears that Mac OS X Tiger version 10.4.9 does not currently support receiving SMS messages through AddressBook, at least with the Nokia E62.

Cannot pair new N95 with Mercedes C class comand

Similar Messages

Maybe you are looking for