Cannot paste object and text at the same time

If I copy object and text at the same time, it will only paste the text and the object is disappear, but it's no problem if I copy them separately. Besides, If I copy multiple text objects, they will be combined to 1 text object and the font will be changed when I paste.

Its a conflict with the software you have installed that creates multiple clipboards. Its aknown issue from another thread.
Remove that software and life will be fine.

Similar Messages

I cannot use data and voice at the same time.

I cannot use data and voice at the same time.
I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
This is a very basic issue, am I missing something? Please help.
My Model is lumia 820 with the latest portico update.
TIA
Sandeep

I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

Talk and Text at the same time?

Hey everybody. I have a quick question regarding the iPhone 4.
On my current phone, (LG EnV touch/Verizon); I can be talking on the phone, and send/recieve texts at the same time. I do this alot.
Is this possible with the iPhone 4? For example, I'll be talking on the phone with a friend. Another friend texts me. Will I be able to stay on the phone with my friend, and also send a text?
Thanks.

So, you are able to be on the phone with someone, and also send a text message at the same time? Im not talking about pictures, videos, etc. Just basic texting.

Cannot download content and play at the same time

Hello Again,I am not sure if this is thanks to the last update but during this week I have not been able to download a game and play others game at the same time.I leaved the game downloading then went to play something (online or campaign) and a couple of minutes later the game that I was downloading appear with an error cannot download, error connection etc.I checked my network and is fine, even purchased a new router with the same results.Is somebody else experiencing this problems or know a solution for this?

Hello Apparently the problem was the game I was downloading i downloaded 2 games today an no error

[Fixed?] Cannot use mouse and touchpad at the same time after upgrade

Dell Inspiron 6400 laptop, Synaptics touchpad, external wireless USB mouse (Logitech).
Yesterday I did a full system upgrade which among other packages upgraded
[2007-11-08 00:06] upgraded synaptics (0.14.6-2 -> 0.14.6.99-1)
[2007-11-08 00:06] upgraded tzdata (2007h-1 -> 2007i-1)
[2007-11-08 00:06] upgraded xf86-input-keyboard (1.1.1-1 -> 1.2.2-2)
[2007-11-08 00:06] upgraded xf86-input-mouse (1.2.1-1 -> 1.2.3-1)
[2007-11-08 00:06] upgraded xf86-video-i810 (1.7.4-2 -> 1.7.4-6)
[2007-11-08 00:06] upgraded xf86-video-vesa (1.3.0-1 -> 1.3.0-5)
[2007-11-08 00:06] upgraded xorg-server (1.2.0-5 -> 1.4-4)
Before the upgrade, I was able to use both the touchpad and the mouse at the same time, using the following xorg.conf settings:
Section "ServerLayout"
InputDevice "Touchpad" "CorePointer"
InputDevice "USB Mouse" "AlwaysCore"
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
EndSection
After the upgrade, the touchpad was still working with these settings but the mouse wasn't. I then changed the xorg.conf settings as follows:
Section "ServerLayout"
InputDevice "USB Mouse" "CorePointer"
InputDevice "Touchpad" "AlwaysCore"
with the InputDevice sections remaining the same for USB Mouse and Touchpad. After this change the mouse was working but the touchpad wasn't. Finally, I changed the xorg.conf settings as follows:
Section "ServerLayout"
InputDevice "Touchpad" "CorePointer"
InputDevice "USBMouse" "SendCoreEvents"
with the InputDevice sections remaining the same for USB Mouse and Touchpad. This didn't change anything from the last setting: the mouse was working but the touchpad wasn't.
How can I restore the ability to simultaneously use mouse and touchpad?
Last edited by RobF (2007-11-09 20:20:54)

Try this:
Move "SendCoreEvents" to the Touchpad line (replacing the "AlwaysCore" bit) and then comment out the USB mouse. So in the end, it'll look like this:
Section "ServerLayout"
InputDevice "Touchpad" "SendCoreEvents"
# InputDevice "USBMouse"
EndSection
Restart X and see if everything is working right.
PS: You may also want to consider changing the Touchpad device line to "/dev/input/mouse2" instead of "/dev/psaux" as I believe psaux has been deprecated in kernel 2.6. I could be wrong, but I can tell you that /dev/input/mouse2 works great with the touchpad on my Dell e1505.

Cannot use Keyboard and touchpad at the same time? Twist

Hi,
I have the lenovo twist with the i7 processor and a 500GB hard drive (8GB ram). I have noticed that when using the keyboard, you cannot use the touchpad. Although you can use the trackpoint? I know this is a minor issue but can it be updated to fix?

Gamloi7 wrote:
Hi, Kyleosipad
You should be able to do this; it just requires the changing of a setting. If you navigate to Control Panel ► Mouse ► UltraNav ►Settings ► Smart Check Notices ► PalmCheck, you can adjust the PalmCheck sensitivity. PalmCheck is a feature that helps reduce misclicks and touches of the TrackPad. If you uncheck the box that says Prioritize for keyboard and touch input, and click Apply, then you should be able to type and use the TrackPad simultaneously.
Best,
Adam
Yes, that's true - you can disable the "Prioritize for keyboard and touch input," but then you lose Palm Check ENTIRELY even though it's still "set" to its default position. Mine is set one setting from the red setting, so the Palm Check should be active and working as normal. However, when I start typing it goes nuts and my mouse pointer jumps all over the place. The only way I can get it to behave is to again enable "Prioritize for keyboard and touch input."
Can you confirm this?

Cannot connect HDMI and microUSB at the same time

Hi, there is not enough space on ATV2 both ports are on top of each other is there any way around this so you can use HDMI and also microusb?
patrick63

As listed in the Tech Specs
Micro-USB (for service and support)
What are you trying to use if for?
The intended purpose is when there is a problem with the Apple TV (from the manual p.29):
•          If          Apple          T V          still          doesn’ t          respond:
•          Disconnect the power and HDMI cables from Apple TV.
•          Connect one end of a micro USB cable (sold separately) to the back of
Apple TV, and the other end to your computer.
•          Open iTunes on your computer, select Apple TV in the Source list, and then
click Restore.

Can we create graphic and text in the same window of smartform without using template?

we create graphic and text in the same window of smartform without using template?

Hi Kinjal,
as far as i understand you are talking about a template which you can partitioned and in one part you wants to show your graphics and in other part you wants to print your text, the border of template shall remain invisible.
If you wants to do it without using a template, you can do it as sujjested by Susmitha, but creating a template will provide you more flexibility that if you wants to change the attributes in future you can do it easily.

Datasocket help, want to use the same(one .ocx only) in VB and HTML at the same time

I want to create one ActiveX control that can be use in VB and HTML. My control will consist 1 CommandButton, 1 TextBox and 1 Label.
My Objective is to have real time data passing between the same control which will be used at VB and HTML at the same time.
For example, from HTML if I click a button, the text at textbox at HTML will be pass to the label at VB at the same time. And vice versa where when button at VB is click, the text at textbox at VB will be pass to the label at HTML.
Help me.

Hello Sam R.,
The ActiveX will be written in VB6 with Measurement Studio6. It's some sort of tutorial lesson for me to test the capability of DataSocket.
I want to create 1 control which will act as reader and writer. I am using Windows XP with IIS as web server and testing using 1 open VB6 Form with the control and 1 HTML file with the control using Data Socket Server with dstp://localhost/something. I dont know whether I need to have the script or not, what ever can do. tell me if it is the way to do. If it can be program directly in the control is better.
Basically, yes. the command button inside the control should updates both label and textbox.
If you can say that 1 datasocket control is enough, I will follow your advice because you are the expert.
I try before by using the example in DSReader and DSWriter but I cannot do the 'real time' updating when I click either button in VB6 or HTML page. It can only updated when I click again the commandbutton and

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Ipod nano (5th generation) - want to use headphones and charge at the same time

I have an ipod nano (5th generation). Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

Cannot open 2 Virtual Machines at the same time to access the same Database

Folks,
Hello.
I am installing Oracle Database 11gR2 RAC system using 2 Virtual Machines (rac1 and rac2) on the top of VMPlayer 3.
The VM rac1 and rac2 run correctly when one of them is shutdown.
Their locations are F:\VM_RAC\rac1 and F:\VM_RAC\rac2.
While rac2 is running, I open rac1. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
While rac1 is running, I open rac2. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
The 2 error messages are the same. This means I cannot open 2 VMs rac1 and rac2 at the same time. When we run RAC system, we have to open 2 machines or more than 2 machines at the same time so that all machines can access the same Database Server.
My question is:
Can any folk tell me how to have rac1 and rac2 run at the same time ?
Thanks.

You need to disable disk locking, which ordinarily is performed by the first VM to prevent any other VMs from corrupting your vmdk files via uncoordinated writes. You will have to shutdown both of your VMs and edit the *.vmx flat file for each, adding lines like the following (settings taken from workstation 6, but should be nearly identical settings for VM Player 3.x):
http://crosbysite.blogspot.com/2007/10/clustering-in-vmware-workstation-6.html
scsi1.sharedbus = "Virtual"
disk.locking = "false"
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.dataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "4096"
diskLib.maxUnsyncedWrites = "0"
A few comments:
- your shared disks (scsi1) must be on a separate virtual scsi bus than the boot disk (scsi0), to allow setting the sharedbus flag as seen above.
- you must also ensure the cache parameters and unsynced writes settings are set to guarantee that all IO is immediately flushed to the vmdk file so the other VM can immediately access the latest version of data.

When i hold down command and r at the same time after restarting it comes up with a

When i hold down command and r at the same time after restarting it comes up with a black screen and a lock symbol and a field bellow where you would input a password, i have tried ALL of my possible passwords including my password i use for the mac and it stil will not work! all that happens is the text i put in bellow erases itself after hiting enter or clicking the arrow.

I've tried my apple ID password and that doesn't work either . I don't recall seting a password for an encrypted disk either :/ if it was for an encrypted disk, would it be in keychain anywhere? if so how can i find it?
Thanks!

Why cant i talk and surf at the same time?

Why cant i talk and surf at the same time? Got lost yesterday and while on the phone i couldn't search store web to get the address. Perfect timing to figure this out; when you're lost. This is a MAJOR problem for me and anyone on the go. WHEN WILL THIS BE FIXED??? I will not hesitate to return this phone as im sure all TURBO users feel the same. Someone said the MOTO X was the same way... is it still...why hasn't then been fixed by now? Which now makes me wonder if this wasn't an oversight but something intentional. Why did they hide the fact that they knew this was going on? i should have been told that this capability wasn't available on the TURBO at time of purchase. FIX IT NOW!

ChristiLockridge wrote:
And i've had every DROID since the original with the exception of the Bionic.
Then you have had phones WITHOUT the capability of talk/surf at the same time. If you don't realize this, then you don't(or at least didn't) use it as often as you think. Original Droid didn't have this capability. Droid X didn't have this capability. Droid X2 didn't have this capability. For the most part(there may have been exceptions of which I am unaware), NO Verizon phone had this capability until 4G phones and then ONLY when on a 4G LTE signal. 4G phones on a 3G signal did not/do not have this capability.
ChristiLockridge wrote:
The same as texting, or calling or browsing. This is just a given.
Personally, I check these things on EVERY phone before I purchase. This is just a given.

Container resize and paint on the same time needed

Hi all,
I am trying to make a transparent window using screenshots and I am getting a flickering of the image I am drawing on the window.
I think this is happening because setLocation() method moves the window and makes the repaint but with the old graphics on it. When the paint() will be called probably the paint event will be executed after the move event so on the window the two Graphics will be painted. This is what I think that causes the flicker.
If anyone has an ideea of how can I make the move - setLocation() - and paint() in the same time please tell me!
Thanks,
Robert

You cannot do this with a UCM hunt group. CCX cannot play media to the caller after you invoke a Call Redirect or Call Consult Transfer.
You can do this if you configure the target users as contact center agents and use a Select Resource step. If none of the agents are available [ready] to take a call, you can play a welcome prompt or other actions that is interrupted if an agent becomes available. There are two noteworthy caveats to this:
1) You can only offer a call to one contact center user at a time. This would be analogous to a Longest Idle hunt group model.
2) There is a second branch that you will see on this step: Connected. Note that when an agent's phone is ringing, the caller is not in the queued branch of the step. The caller is hearing Network MoH.
This means in practice you will want to put the welcome message before whatever else you want to do with the call and let it complete.

Cannot paste object and text at the same time

Similar Messages

Maybe you are looking for