Cannot perform DDL DML inside a query

Hi,
I am using Tom Kyte's in_list function to create a select list inside a select query in one of the reports in my application, given as follows:
SELECT col1, col2,...htmldb_item.select_list_from_query(1,NULL,
'(SELECT column_value d,column_value r FROM the((SELECT CAST
(mypackage.in_list(''||colon_delimited_list||'') AS
myTableType) FROM dual) ))' )...FROM A, B WHERE ...
But the following error appears:
report error:
ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML
ORA-06512: at "FLOWS_020200.WWV_FLOW", line 7002
ORA-06512: at "FLOWS_020200.WWV_FLOW_UTILITIES", line 113
ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "(" when expecting one of the following:
begin case declare exit for goto if loop mod null pragma
raise return select update while with
If I replace the query passed to function select_list_from_query, with some simple dummy query, then it works fine.
Please tell me is there any limitation of its use as this case?
What may be the possible best solution?
Regards,
Amir Aman

I have tried Scott's parenthesis solution first.
It is working but with making an additional change, i.e., passing '||''''||colon_delimited_list||''''||' instead just ''||colon_delimited_list||''.
Denes, I have also seen your examples, really a helpful resource.
Thank you very much!
Amir Aman

Similar Messages

  • "cannot perform a DML operation inside a query" error when using table func

    hello please help me
    i created follow table function when i use it by "select * from table(customerRequest_list);"
    command i receive this error "cannot perform a DML operation inside a query"
    can you solve this problem?
    CREATE OR REPLACE FUNCTION customerRequest_list(
    p_sendingDate varchar2:=NULL,
    p_requestNumber varchar2:=NULL,
    p_branchCode varchar2:=NULL,
    p_bankCode varchar2:=NULL,
    p_numberOfchekbook varchar2:=NULL,
    p_customerAccountNumber varchar2:=NULL,
    p_customerName varchar2:=NULL,
    p_checkbookCode varchar2:=NULL,
    p_sendingBranchCode varchar2:=NULL,
    p_branchRequestNumber varchar2:=NULL
    RETURN customerRequest_nt
    PIPELINED
    IS
    ob customerRequest_object:=customerRequest_object(
    NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL,NULL);
    condition varchar2(2000 char):=' WHERE 1=1 ';
    TYPE rectype IS RECORD(
    requestNumber VARCHAR2(32 char),
    branchRequestNumber VARCHAR2(32 char),
    branchCode VARCHAR2(50 char),
    bankCode VARCHAR2(50 char),
    sendingDate VARCHAR2(32 char),
    customerAccountNumber VARCHAR2(50 char),
    customerName VARCHAR2(200 char),
    checkbookCode VARCHAR2(50 char),
    numberOfchekbook NUMBER(2),
    sendingBranchCode VARCHAR2(50 char),
    numberOfIssued NUMBER(2)
    rec rectype;
    dDate date;
    sDate varchar2(25 char);
    TYPE curtype IS REF CURSOR; --RETURN customerRequest%rowtype;
    cur curtype;
    my_branchRequestNumber VARCHAR2(32 char);
    my_branchCode VARCHAR2(50 char);
    my_bankCode VARCHAR2(50 char);
    my_sendingDate date;
    my_customerAccountNumber VARCHAR2(50 char);
    my_checkbookCode VARCHAR2(50 char);
    my_sendingBranchCode VARCHAR2(50 char);
    BEGIN
    IF NOT (regexp_like(p_sendingDate,'^[[:digit:]]{4}/[[:digit:]]{2}/[[:digit:]]{2}$')
    OR regexp_like(p_sendingDate,'^[[:digit:]]{4}/[[:digit:]]{2}/[[:digit:]]{2}[[:space:]]{1}[[:digit:]]{2}:[[:digit:]]{2}:[[:digit:]]{2}$')) THEN
    RAISE_APPLICATION_ERROR(-20000,cbdpkg.get_e_m(-1,5));
    ELSIF (p_sendingDate IS NOT NULL) THEN
    dDate:=TO_DATE(p_sendingDate,'YYYY/MM/DD hh24:mi:ss','nls_calendar=persian');
    dDate:=trunc(dDate);
    sDate:=TO_CHAR(dDate,'YYYY/MM/DD hh24:mi:ss');
    condition:=condition|| ' AND ' || 'sendingDate='||'TO_DATE('''||sDate||''',''YYYY/MM/DD hh24:mi:ss'''||')';
    END IF;
    IF (p_requestNumber IS NOT NULL) AND (cbdpkg.isspace(p_requestNumber)=0) THEN
    condition:=condition|| ' AND ' || ' requestNumber='||p_requestNumber;
    END IF;
    IF (p_bankCode IS NOT NULL) AND (cbdpkg.isspace(p_bankCode)=0) THEN
    condition:=condition|| ' AND ' || ' bankCode='''||p_bankCode||'''';
    END IF;
    IF (p_branchCode IS NOT NULL) AND (cbdpkg.isspace(p_branchCode)=0) THEN
    condition:=condition|| ' AND ' || ' branchCode='''||p_branchCode||'''';
    END IF;
    IF (p_numberOfchekbook IS NOT NULL) AND (cbdpkg.isspace(p_numberOfchekbook)=0) THEN
    condition:=condition|| ' AND ' || ' numberOfchekbook='''||p_numberOfchekbook||'''';
    END IF;
    IF (p_customerAccountNumber IS NOT NULL) AND (cbdpkg.isspace(p_customerAccountNumber)=0) THEN
    condition:=condition|| ' AND ' || ' customerAccountNumber='''||p_customerAccountNumber||'''';
    END IF;
    IF (p_customerName IS NOT NULL) AND (cbdpkg.isspace(p_customerName)=0) THEN
    condition:=condition|| ' AND ' || ' customerName like '''||'%'||p_customerName||'%'||'''';
    END IF;
    IF (p_checkbookCode IS NOT NULL) AND (cbdpkg.isspace(p_checkbookCode)=0) THEN
    condition:=condition|| ' AND ' || ' checkbookCode='''||p_checkbookCode||'''';
    END IF;
    IF (p_sendingBranchCode IS NOT NULL) AND (cbdpkg.isspace(p_sendingBranchCode)=0) THEN
    condition:=condition|| ' AND ' || ' sendingBranchCode='''||p_sendingBranchCode||'''';
    END IF;
    IF (p_branchRequestNumber IS NOT NULL) AND (cbdpkg.isspace(p_branchRequestNumber)=0) THEN
    condition:=condition|| ' AND ' || ' branchRequestNumber='''||p_branchRequestNumber||'''';
    END IF;
    dbms_output.put_line(condition);
    OPEN cur FOR 'SELECT branchRequestNumber,
    branchCode,
    bankCode,
    sendingDate,
    customerAccountNumber ,
    checkbookCode ,
    sendingBranchCode
    FROM customerRequest '|| condition ;
    LOOP
    FETCH cur INTO my_branchRequestNumber,
    my_branchCode,
    my_bankCode,
    my_sendingDate,
    my_customerAccountNumber ,
    my_checkbookCode ,
    my_sendingBranchCode;
    EXIT WHEN (cur%NOTFOUND) OR (cur%NOTFOUND IS NULL);
    BEGIN
    SELECT requestNumber,
    branchRequestNumber,
    branchCode,
    bankCode,
    TO_CHAR(sendingDate,'yyyy/mm/dd','nls_calendar=persian'),
    customerAccountNumber ,
    customerName,
    checkbookCode ,
    numberOfchekbook ,
    sendingBranchCode ,
    numberOfIssued INTO rec FROM customerRequest FOR UPDATE NOWAIT;
    --problem point is this
    EXCEPTION
    when no_data_found then
    null;
    END ;
    ob.requestNumber:=rec.requestNumber ;
    ob.branchRequestNumber:=rec.branchRequestNumber ;
    ob.branchCode:=rec.branchCode ;
    ob.bankCode:=rec.bankCode ;
    ob.sendingDate :=rec.sendingDate;
    ob.customerAccountNumber:=rec.customerAccountNumber ;
    ob.customerName :=rec.customerName;
    ob.checkbookCode :=rec.checkbookCode;
    ob.numberOfchekbook:=rec.numberOfchekbook ;
    ob.sendingBranchCode:=rec.sendingBranchCode ;
    ob.numberOfIssued:=rec.numberOfIssued ;
    PIPE ROW(ob);
    IF (cur%ROWCOUNT>500) THEN
    CLOSE cur;
    RAISE_APPLICATION_ERROR(-20000,cbdpkg.get_e_m(-1,4));
    EXIT;
    END IF;
    END LOOP;
    CLOSE cur;
    RETURN;
    END;

    Now what exactly would be the point of putting a SELECT FOR UPDATE in an autonomous transaction?
    I think OP should start by considering why he has a function with an undesirable side effect in the first place.

  • ORA-14551: cannot perform a DML operation inside a query

    I have a Java method which is deployed as a Oracle function.
    This Java method parses a huge XML & populates this data
    into a set of database tables.
    I have to call this Oracle function in a unix shell script using sqlplus.
    Value returned by this function will be used by the shell script to decide
    what to do next.
    I am calling the Oracle Java function as follows in the shell script:
    echo "SELECT XML_TABLES.RUN_XML_LOADER('$P1','$P2','$P3','$P4') FROM DUAL;\n" | sqlplus $DB_USER > $LOG
    This gives error - "ORA-14551: cannot perform a DML operation inside a query".
    If I have to add a AUTONOMOUS_TRANSACTION pragma to this Java function,
    where to I add it considering, that the definition of the function is in a Java class.
    Can we do it in call spec?
    create or replace package XML_TABLES is
    function RUN_XML_LOADER(xmlFile IN VARCHAR2,
    xmlType IN VARCHAR2,
    outputDir IN VARCHAR2,
    logFileDir IN VARCHAR2) RETURN VARCHAR2 AS
    LANGUAGE JAVA NAME 'XmlLoader.run
    (java.lang.String, java.lang.String, java.lang.String, java.lang.String)
    return java.lang.String';
    end XML_TABLES;
    If not is there any other way to acheive this?
    Thanks in advance.
    Sunitha.

    If I have to add a AUTONOMOUS_TRANSACTION pragma to this Java function,You'd have to write a PL/SQL function that calls the JSP. But I would caution you about using that pragma. It does introduce tremendous complexity into processing.
    As I see it you only need a function to return the result code so why not use a procedure with an OUT parameter?
    Cheers, APC
    Of course Yoann's suggestion of using an anonymous block would work too.
    Message was edited by:
    APC

  • Cannot perform DML inside a query

    Hi,
    I have a Function and I am trying to execute an "Insert" statement into the Function. It gives me an error saying that-
    ERROR:
    ORA-14551: cannot perform a DML operation inside a query
    ORA-06512: at "SCOTT.POP3", line 243
    I then tried adding : PRAGMA AUTONOMOUS_TRANSACTION to the Function and then it gives me an error saying-
    ERROR:
    ORA-06519: active autonomous transaction detected and rolled back
    ORA-06512: at "SCOTT.POP3", line 245
    My code snippet is as follows :
    CREATE OR REPLACE FUNCTION pop3 (
    username VARCHAR2,
    PASSWORD VARCHAR2,
    msgnum NUMBER
    RETURN tstrings PIPELINED
    IS
    --PRAGMA AUTONOMOUS_TRANSACTION;
    pop3_server CONSTANT VARCHAR2 (100) := 'pop.secureserver.net';
    pop3_port CONSTANT NUMBER := 110;
    pop3_ok CONSTANT VARCHAR2 (10) := '+OK';
    e_pop3_error EXCEPTION;
    socket UTL_TCP.connection;
    line VARCHAR2 (30000);
    line2                    VARCHAR2 (30000);
    BYTES INTEGER;
    msg_from varchar2(4000) := '';
    msg_to varchar2(4000) := '';
    msg_date varchar2(4000) := '';
    msg_sub varchar2(4000) := '';
    msg_body clob := NULL;
    hyphen_checker number := 0;
    msg_body_flag number := 0;
    crlf varchar2(2) := chr(13) || chr(10);
    -- send a POP3 command
    -- (we expect each command to respond with a +OK)
    FUNCTION writetopop (command VARCHAR2)
    RETURN VARCHAR2
    IS
    len INTEGER;
    resp VARCHAR2 (30000);
    BEGIN
    len := UTL_TCP.write_line (socket, command);
    UTL_TCP.FLUSH (socket);
    -- using a hack to check the popd response
    len := UTL_TCP.read_line (socket, resp);
    IF SUBSTR (resp, 1, 3) != pop3_ok
    THEN
    RAISE e_pop3_error;
    END IF;
    RETURN (resp);
    END;
    BEGIN
         DBMS_LOB.CREATETEMPORARY(msg_body,true);
    PIPE ROW ('pop3:' || pop3_server || ' port:' || pop3_port);
    -- Just to make sure there are no previously opened connections
    UTL_TCP.close_all_connections;
    -- open a socket connection to the POP3 server
    socket :=
    UTL_TCP.open_connection (remote_host => pop3_server,
    remote_port => pop3_port,
    --tx_timeout => POP3_TIMEOUT,
    CHARSET => 'US7ASCII'
    -- read the server banner/response from the pop3 daemon
    PIPE ROW (UTL_TCP.get_line (socket));
    -- authenticate with the POP3 server using the USER and PASS commands
         LOOP
    EXIT WHEN LENGTH (line) = 1 AND line = '.';
         END LOOP;
         INSERT INTO email (em_issue, em_date, em_from, em_to, em_subject, em_body)
         VALUES(seq_issue.nextval, msg_date, msg_from, msg_to, msg_sub, msg_body);
         DBMS_LOB.freetemporary(msg_body);
         msg_from := '';
         msg_to := '';
         msg_date := '';
         msg_sub := '';
         msg_body := NULL;
         -- close connection
         PIPE ROW ('QUIT');
         PIPE ROW (writetopop ('QUIT'));
         UTL_TCP.close_connection (socket);
    EXCEPTION
    WHEN e_pop3_error
    THEN
    PIPE ROW ('There are no mails !');
    END;
    Message was edited by:
    Monk
    Message was edited by:
    Monk

    See Note:313597.1 on MetaLink

  • Getting error SQL Error : ORA-14551: cannot perform a DML operation inside a query

    Hi gurus ,
    Your help is greatly appreciated ..
    I am doing some changes in the fucntion for an existing package .Introducing the new below check , am updating one of the tables based on a if condition ..
           IF  numALLOWED_COUNT >= numLAST_COUNT_ADDED+1  THEN
                     blnGDS_Allowed :=True;
                      varSTMT := 'UPDATE PROD.TMS_PROCESS_COUNTER ';
                      varSTMT := varSTMT ||' SET last_count_added = last_count_added+1';
                      varSTMT := varSTMT ||' WHERE process_name = ''DAILY_GDS_COUNT''';
                      varSTMT := varSTMT ||' AND COUNTER_IND = ''750FD130''';
                     PROC_LOG('Update Tms_Process_counter varSTMT --' || varSTMT);
                     IF INSERT_BATCH(99,varSTMT) > 0 THEN
                        NULL;
                     END IF;
    Function for insert_batch :
    UNCTION INSERT_BATCH(numTABLE_ID IN NUMBER, varSQL_STATEMENT IN VARCHAR2) RETURN NUMBER IS
    varINSERT_BATCH_STMT  VARCHAR2(32767)     := NULL;
    varADD_REC_TYPE       BATCH_TABLES.ADD_REC_TYPE%TYPE;
    BEGIN
        PROC_LOG( 'INSIDE INSERT_BATCH IRC : ' || varSQL_STATEMENT );  --IRC 9/20 UC
        INSERT INTO BATCH_STATEMENT(QUEUE_ID,TABLE_ID,STATEMENT,QUEUE_SEQUENCE_ID)
        VALUES (numQUEUE_ID,numTABLE_ID,varSQL_STATEMENT,1);
    RETURN 1;
    EXCEPTION WHEN OTHERS THEN
        PROC_LOG('Failed in INSERT_BATCH');
        PROC_LOG('SQL Error : ' || SUBSTR(SQLERRM,1,1000));
        RETURN -1;
    END INSERT_BATCH;
    desc PROD.BATCH_STATEMENT
      QUEUE_ID           NUMBER(15)                 NOT NULL
      TABLE_ID           NUMBER(2)                  NOT NULL
      STATEMENT          VARCHAR2(4000 BYTE)        NOT NULL
      QUEUE_SEQUENCE_ID  NUMBER(5)                  NOT NULL
    Some how when its calling the insert_batch , its giving me the error in the logs as below:
    04:01:41 - Update Tms_Process_counter varSTMT --UPDATE PROD.TMS_PROCESS_COUNTER  SET last_count_added = last_count_added+1 WHERE process_name = 'DAILY_GDS_COUNT' AND COUNTER_IND = '750FD130'
    04:01:41 - INSIDE INSERT_BATCH IRC : UPDATE PROD.TMS_PROCESS_COUNTER  SET last_count_added = last_count_added+1 WHERE process_name = 'DAILY_GDS_COUNT' AND COUNTER_IND = '750FD130'
    04:01:41 - Failed in INSERT_BATCH
    04:01:41 - SQL Error : ORA-14551: cannot perform a DML operation inside a query

    Some how when its calling the insert_batch , its giving me the error in the logs as below:
    04:01:41 - SQL Error : ORA-14551: cannot perform a DML operation inside a query
    Yes - and the exception is telling you EXACTLY what the problem is. You have a query
    IF INSERT_BATCH(99,varSTMT) > 0 THEN
    And you are performing a DML operation inside that query:
    INSERT INTO BATCH_STATEMENT(QUEUE_ID,TABLE_ID,STATEMENT,QUEUE_SEQUENCE_ID)
        VALUES (numQUEUE_ID,numTABLE_ID,varSQL_STATEMENT,1);
    Like the exception says: you can't do that.
    You need to call the function using PL/SQL and capture the return value into a variable. Then test that variable:
    myVar := INSERT_BATCH(99,varSTMT);
    if myVar > 0 THEN

  • ORA-38301: can not perform DDL/DML over objects in Recycle Bin

    Oracle 10.2.0.4:
    When performing DDL on a table I get the error "ORA-38301: can not perform DDL/DML over objects in Recycle Bin". I ran purge recyclebin but didn't help. I then ran following sql (below) and it returned whole bunch of rows for that user. Does it mean that purfe recyclebin didn't work? What should I do?
    select r.obj#, r.original_name, u.username from recyclebin$ r, dba_users u where r.owner#=u.user_id

    I ran purge recyclebin but didn't helpis this a rac env?
    check the metalink note performing DML/DDL operation over object in bin ORA-38301 - 578075.1
    Bug 4760728 - ORA-38301 during DROP TABLE when already dropped from a different node 4760728.8

  • Cannot perform a DML operation inside a query

    Dear all,
    I have implemented the "Online Discussion Forum" of Steve Muench (Building Oracle XML Applications,ISBN:1-56592-691-9), and am trying to extend it by logging the queries and timing information inside the ForumSearch.Hits function (http://examples.oreilly.com/orxmlapp/orxmlapp_examples.zip).
    That function is called as follow
    SELECT ForumSearch.Hits(...) as HITS from DUAL
    However, I am getting the ORA-14551.
    That function opens a cursor and performs a select count() on a dynamic SQL, closes the cursor and returns the number of hits found.
    The way i tried to extend it was to simply add the following line after the_cursor was closed.
    insert into LOGGING values(the_count,response);
    However, unfortunately I get the fatal error message
    ORA-14551
    I do understand that one shall not do an INSERT while doing a SELECT on the same table, however in this case I am doing a INSERT on another table ...
    Puzzling enough, if I try to launch a DBMS_JOB for doing that insert I get a ORA-14551 as well.
    I thought that by launching the DBMS_JOB I was going to uncouple the 2 events ...
    Advice is appreciated.
    Luca

    As you discovered, Oracle will not allow you to directly manipulate the database within a select statement. Since the call to dbms_job actually inserts a row in a table, you just moved the DML to a different table. What you need to do is create a seperate procedure to do the logging, and call that in your function. Something like:
    CREATE PROCEDURE logger (p_count IN NUMBER, p_reponse IN VARCHAR2) IS
    PRAGMA AUTONOMOUS_TRANSACTION;
    BEGIN
       INSERT INTO logging VALUES (p_count, p_response);
       COMMIT;
    END;then, your function would look something like:
    CREATE FUNCTION counter RETURN NUMBER IS
    l_count NUMBER;
    l_response VARCHAR2(10);
    BEGIN
       SELECT COUNT(*) INTO l_rval
       FROM t;
       logger(l_count,l_reponse);
       RETURN l_count;
    END;TTFN
    John

  • Cannot perform a dml statement within a query: ora-14551

    I'm trying to call my function from a SELECT statement, and I keep getting the error mentioned in the title of the thread.
    Could anybody help me out with this?
    HEre's my code:
    BEGIN
    DECLARE CURSOR cur_order IS
      SELECT idshopper, orderplaced
      FROM bb_basket
      WHERE idshopper=p_shopperid
      FOR UPDATE NOWAIT;
    BEGIN
    FOR rec_order IN cur_order LOOP
      IF rec_order.orderplaced=1 THEN lv_count_num:=lv_count_num+1;
      END IF;
      IF rec_order.orderplaced=0 THEN lv_count_num:=0;
      END IF;
    END LOOP;
    RETURN lv_count_num;
    END;
    END;
    SELECT idshopper, num_purch_sf(idshopper)
    FROM bb_shopper
    WHERE idshopper=23;

    And you probably want to rewrite this to a single query like this:
    select s.idshopper
         , nvl(sum(b.orderplaced),0)
      from bb_shopper s
         , bb_basket b
    where s.idshopper = b.idshopper (+)
       and s.idshopper = 23
    group by s.idshopperThis way you won't have extra code to maintain and you prevent the contextswitches from SQL to PL/SQL.
    Note: query untested
    Regards,
    Rob.
    Message was edited by:
    Rob van Wijk
    Looking closer at the original code, I see that your query doesn't have an order by and so the outcome of your function is undeterministic. Maybe my query is what you intended, but beware: my query won't necessarily yield the same result

  • Firefox opens websites, but I cannot perform some functions inside the sites (such as Amtrak scheduling, airline flight scheduling, ebay ask a question of seller, make Best Offer, etc..).

    Not sure that this is a Firefox problem, but I noticed this after I updated to the 36 Version. I also have IE on my computer, only use it to access websites if I am having problems with connecting (to verify if the problem is Firefox or my Charter connection)... I now am unable to access IE. I have Windows XP.

    This issue can be caused by an extension or plugin that isn't working properly or is misconfigured.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem.
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.1 r82
    # Next Generation Java Plug-in 1.6.0_21 for Mozilla browsers
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • Probelm regarding function ( can not perform dml openration inside a query

    hi all,
    i have created on function which is used for delete rows and insert new rows ( records) but when i run i got
    ora-14551 -can not perform a DML operation inside a query
    0ra-06512 - fn_brok_upfdate_dtltbl , line no 21
    this error
    following are my code please help me
    CREATE OR REPLACE FUNCTION Fn_Brok_Update_Dtltbl
    (fnBROK_TYPE VARCHAR2,fnSLAB_ID VARCHAR2, fnINV_TYPE_CODE VARCHAR2)
    RETURN NUMBER
    AS
    fnCOUNT      PLS_INTEGER;
    fnTBLNAME     VARCHAR2(40);
    fnTMPINV_TYPE_CODE VARCHAR2(1000);
    fnTMPINVCODE       VARCHAR2(50);
    fnMYQUERY          VARCHAR2(4000);
    BEGIN
          IF UPPER(fnBROK_TYPE) = 'UPFRONT' THEN
          fnTBLNAME :='UPFRONT_RECD_DTL';
          END IF ;
        IF fnSLAB_ID IS NOT NULL AND fnINV_TYPE_CODE IS NOT NULL THEN
        fnTMPINV_TYPE_CODE := fnINV_TYPE_CODE ;
                 fnMYQUERY := 'SELECT COUNT(*) FROM '||fnTBLNAME||' WHERE SLAB_ID = '''||fnSLAB_ID||'''' ;
                 EXECUTE IMMEDIATE fnMYQUERY INTO fnCOUNT  ;
              IF fnCOUNT > 0 THEN
                    DELETE FROM UPFRONT_RECD_DTL WHERE slab_id = fnslab_id ;
              END IF ;
              WHILE fnTMPINV_TYPE_CODE IS NOT NULL
                    LOOP
                        SELECT  CASE WHEN INSTR(fnTMPINV_TYPE_CODE,',')= 0 THEN fnTMPINV_TYPE_CODE
                        ELSE Strsplit(fnTMPINV_TYPE_CODE,1,INSTR(fnTMPINV_TYPE_CODE,',') - 1  ) END  INTO fnTMPINVCODE FROM DUAL ;
                        fnMYQUERY := 'INSERT INTO '||fnTBLNAME||'(SLAB_ID, INV_TYPE_CODE)
                                VALUES ('''||fnSLAB_ID||''','||fnTMPINVCODE||') ' ;
                        EXECUTE IMMEDIATE fnMYQUERY ;
                        SELECT CASE WHEN INSTR(fnTMPINV_TYPE_CODE,',')= 0 THEN NULL
                        ELSE Strsplit(fnTMPINV_TYPE_CODE,INSTR(fnTMPINV_TYPE_CODE,',')+ 1 , LENGTH(fnTMPINV_TYPE_CODE)) END
                        INTO fnTMPINV_TYPE_CODE FROM DUAL ;
                   END LOOP ;
       fnCOUNT := 1 ;
       RETURN fnCOUNT ;
       END IF ;
    END ;
    [\pre]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    How did you call this function ? from SQL Statement ? Then No way .. . .
    ORA-14551: cannot perform a DML operation inside a query
    Cause: DML operation like insert, update, delete or select-for-update cannot be performed inside a query or under a PDML slave.
    Action: Ensure that the offending DML operation is not performed or use an autonomous transaction to perform the DML operation within the query or PDML slave

  • ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML;;

    Hi all,
    I have a problem!
    I have one PL SQL function doing an Update and insert into some oracle tables, this function return one number (0 or 1 or 2).
    I'm excuting this query from one PHP program to call the function :
    SELECT SALE.DB_FUNC_ASSOCIATE_TB2U('[email protected]',123)
    FROM dual;
    the problem that I have these errors :
    ERROR DB_FUNC_ASSOCIATE_TB2U Level 1 : ORA-01403: no data found
    ERROR DB_FUNC_ASSOCIATE_TB2U : ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML
    there's a mean that i can do to call this function from PHP without getting this Error such as I tested this function using the script below and it works fine:
    declare
    a number;
    begin
    a:= SALE.DB_FUNC_ASSOCIATE_TB2U('[email protected]',123) ;
    end;
    Please help me :)
    regards,

    Sure, it works in the sense that you would no longer get an error.
    Creating this as an autonomous transaction, however, is going to blow your transactional integrity. You've now got code that is being called as the result of a SELECT operation (something that everyone that comes after you will assume is read-only) that commits outside of the current transaction scope. That is almost always a bad thing.
    In addition, having a WHEN OTHERS without a RAISE is almost always a bug. You're completely hiding the error message plus you're discarding proper exception handling in order to provide a return code and assuming that the caller is going to check the status. Relying on return status codes is normally a bad idea because it's very easy on the client side to forget to check the return code. Even if the client were to check the return code, it has no idea what went wrong, so it can't even log the root cause of the error.
    Justin

  • ORA-20001: Oracle error -20001: ORA-20001: Oracle error -14552: ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML has been detected in fnd_global.set_nls.set_parameter('NLS_LANGUAGE','AMERICAN'). has been detected in fnd_global.set

    ORA-20001: Oracle error -20001: ORA-20001: Oracle error -14552: ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML has been detected in fnd_global.set_nls.set_parameter('NLS_LANGUAGE','AMERICAN'). has been detected in fnd_global.set_nls.
    this error generates everytime when i run a apex application
    i did call the package in session state with  dbms_session.set_nls('NLS_LANGUAGE','AMERICAN'); but still it shows the error in the report any solution please

    Hi Amrit
    Can you put the FND_GLOBAL calls in a pre map trigger/process rather than as part of the map?
    Cheers
    David

  • Cannot perform dml operation inside a query

    I have created a function which does some dml opration.
    when I use it in a through a transformation operator, and execute the map,
    it throws the following error:
    cannot perform dml operation inside a query
    how to handle this?

    Hi,
    if you want to execute the dml within a mapping, use the pre or post mapping procress operator. Or use a sql*plus activity in the process flow.
    Regards,
    Carsten.

  • ORA-14552: cannot perform a DDL in a execute immediate - proc

    Hi All,
    I am trying to disable triggers in a stored procedure:
    PROCEDURE Alter_trigger_DISBALE
    IS
    BEGIN
         execute immediate ('alter trigger BEI_INS_MY DISABLE');
    END;
    I get the following error:
    ORA-14552: cannot perform a DDL, commit or rollback inside a query or DML
    Is there a solution for this problem ?
    Best Regards
    Friedhold

    How are you calling the procedure?
    I assume that, since your procedure actually compiles, it doesn't have the parenthesis around the EXCEUTE IMMEDIATE string and that there is a CREATE before the PROCEDURE. I hope that "disable" is spelled correctly in the real thing.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Why we cannot perform DML operations against complex views directly.

    hi
    can any tell me why we cannot perform DML operations against complex views directly.

    Hi,
    It is not easy to perform DML operations on complex views which involve more than one table as said by vissu. The reason being you may not know which columns to be updated/inserted/deleted on the base tables of the views. If it is a simple view containing a single table it is as simple as performing actions on the table.
    For further details visit this
    http://www.orafaq.com/wiki/View
    cheers
    VT

Maybe you are looking for

  • Workspace Credential Conflict between Logged-in User and the Authenticated User

    Hi there, I am running LiveCycle ES Update1 SP2 with Process Management component on WIN/JBoss/SQL Server 2005. I have been encountering user credential conflicts from time to time, but it has not been consistent and the problem manifested in various

  • Why can I only download 25 mb of itunes 10.6 and at 25.1 mb, it resets and starts over again????

    This is making me want to throw the iphone, the iMac, the windows pc (because it has itunes on it) and anything else related to apple into the freaking ocean and even stop eating apples.  I have been searching the web rying to find answers and always

  • File Size Growing too much with every Save

    I have designed a form that uses Giids with drop-down lists and also some Image Fields.  When I am using the form and I save it the file size grows excessively with each save.  If I add even one character to a sentence the file size may grow by as mu

  • CCMS BI Setup check

    Hi, I am getting following error during CCMS BI Setup check. Solution Manager 7.0 SP18 (EHP1) SOLMAN_WORKCENTER -> Root Cause Analysis ->  Diagnostics Self Check Severity:Error StackTrace:com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An

  • TREX error code 6800 during preprocessing

    Can anyone tell me what error code 6800 during preprocessing stage means? Is there a list of error codes and what they mean? Any ideas on how I resolve this error? Im trying to index the contents of a web repository manager that contains a single (in