Cannot ping/access iphone from pc via wifi connection
Hi! Im trying to ping my iphone from my pc, they are in the same subnet/network, and they are both connected to same wifi/wireless network, but I cannot ping my iphone, is there other things i need to do on my iphone for it to ping-able/accessable from my pc wirelessly? Thank you.
Yes that worked thank you and has taken me back to the start of the migration assistant. Unless there is anything else I should do, very many thanks! I will try the full process again shortly, having turned off all window updates include virus checker updates which may have caused the problem and I will use the Ethernet cable method. It would have taken hours via wifi, 4 hours to transfer music alone.
Thank yu
Ljs
Similar Messages
-
During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
Please how do i reactivate iPhone?Hello DadiPrince,
The following article contains information beneficial to getting your iPhone back into normal working order.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
All the best,
Allen -
I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions
Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton -
I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?
It depends upon how the other machines are connecting to your MBA:
If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them -
I cannot ping any VIP from within the ACE or from rservers
I cannot ping any VIP from within the ACE or from rservers. Is this expected? I have rservers in other serverfarms that need to be able to communicate with the VIP of other serverfarms. Any help is greatly appreciated.
Thanks for you reply. here is the config. I removed other rserver and serverfarm config that does not have to do with this issue.
logging enable
logging fastpath
logging standby
logging console 4
logging timestamp
logging trap 4
logging history 4
logging buffered 4
logging persistent 4
logging monitor 4
logging device-id hostname
logging host 172.26.254.185 udp/514
logging host 172.26.221.25 udp/514
access-list INBOUND line 8 extended permit ip any any
access-list INBOUND line 16 extended permit icmp any any
access-list INBOUND line 24 extended permit tcp any any
access-list INBOUND line 32 extended permit udp any any
access-list ORADB line 8 extended permit tcp any any
probe http CITRIX
interval 30
passdetect interval 15
passdetect count 6
open 1
probe tcp HYPERION
port 19000
interval 2
faildetect 2
passdetect interval 2
passdetect count 2
receive 2
open 1
probe icmp PROBE_SERVICE_ICMP
interval 5
passdetect interval 5
probe tcp W15SPSWFET001_PROBE
interval 5
passdetect interval 5
connection term forced
open 1
parameter-map type connection TIMEOUT
set timeout inactivity 43200
parameter-map type http test
persistence-rebalance
set header-maxparse-length 2006
rserver host w0bairwatch003
description MDM-SEG
ip address 172.20.60.73
inservice
rserver host w0bairwatch004
description MDM-SEG
ip address 172.20.60.74
inservice
rserver host w0bairwatch005
description MDM-DEVICE
ip address 172.20.60.75
inservice
rserver host w0bairwatch006
description MDM-DEVICE
ip address 172.20.60.76
inservice
rserver host w0bhamobile001
description Lotus Notes Traveler Server
ip address 172.20.60.57
inservice
rserver host w0bhamobile002
description Lotus Notes Traveler Server
ip address 172.20.60.58
inservice
serverfarm host MDMDEVICE
predictor leastconns
probe PROBE_SERVICE_ICMP
rserver w0bairwatch005
inservice
rserver w0bairwatch006
serverfarm host MDMSEG
predictor leastconns
probe PROBE_SERVICE_ICMP
rserver w0bairwatch003
inservice
rserver w0bairwatch004
inservice
serverfarm host TRAVLR
predictor leastconns
probe PROBE_SERVICE_ICMP
rserver w0bhamobile001
inservice
rserver w0bhamobile002
inservice
class-map match-all MDMDEVICE-VIP
2 match virtual-address 172.20.48.35 any
class-map match-all MDMSEG-VIP
2 match virtual-address 172.20.48.33 any
class-map type management match-any REMOTE_ACCESS
description Remote access traffic match
201 match protocol ssh any
202 match protocol telnet any
203 match protocol icmp any
204 match protocol https any
205 match protocol http any
206 match protocol xml-https any
207 match protocol snmp any
class-map match-all TRAVLR-VIP
2 match virtual-address 172.20.48.34 any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
policy-map type loadbalance first-match MDMDEVICE
class class-default
serverfarm MDMDEVICE
policy-map type loadbalance first-match MDMSEG
class class-default
serverfarm MDMSEG
policy-map type loadbalance first-match TRAVLR
class class-default
serverfarm TRAVLR
policy-map multi-match CLIENTS-VIPS
class MDMDEVICE-VIP
loadbalance vip inservice
loadbalance policy MDMDEVICE
loadbalance vip icmp-reply active
class MDMSEG-VIP
loadbalance vip inservice
loadbalance policy MDMSEG
loadbalance vip icmp-reply active
class TRAVLR-VIP
loadbalance vip inservice
loadbalance policy TRAVLR
loadbalance vip icmp-reply active
interface vlan 48
ip address 172.20.48.10 255.255.255.0
access-group input INBOUND
access-group output INBOUND
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input CLIENTS-VIPS
no shutdown
interface vlan 60
ip address 172.20.60.10 255.255.255.0
access-group input INBOUND
access-group output INBOUND
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
ip route 0.0.0.0 0.0.0.0 172.20.48.1 -
Cannot ping or print from MacBook...
I'm having a really strange issue where I cannot print from my MacBook wired or wireless, I can, however, ping and print from my iMac. They are both connected to the same router/wap. I cannot ping anything from the MacBook when it is wired or wireless! All other network functions work normally though, I can access the internet and screen share over my local network... but I cannot ping to or from the MacBook.. weird eh? Can someone please shed some light on this? Thanks!
Dan OHave you tried to log in as a different user then trying from there. If you do not have a different user just create one...
Go to Sys Pref/accounts then click on the lock at the bottom left corner put in the admin password then the plus button at the bottom left of accounts window will become active, press it to create a new account.
If the ping and print work from that account then you'll know the problem is not OSX globally, at it may be fix by trashing some .plist? Not sure which ones yet.
Message was edited by: iyacyas -
I am trying to transfer files from MacBook Pro to new MacBook air using Migration assistant via WiFi connection - the two computers can't seem to find each other.
Any ideas?
BarryTry this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton -
When connecting ipad to my iPhones personal hotspot via wifi it is showin up as 2 connections when only 1 device is connected. Is someone hacking my phone? I only figured out I had a problem when my partner did the exact same set up and it showed up as only 1 device connected. I have changed the password and turned it off/on and etc. the really weird thing is now when my ipad is turned off and I turn my iphone personal hotspot on it shows up with 1 connection (when I don't have anything connected) for about 5 secs and then goes off and then 1 device connected for about 5 secs and then back off. This just keeps going on and off. What is going on. Could my phone have a bug or be hacked. Please help as it is kinda freaking me out. Thanks.
Hello asrt17,
This may occur if your iPhone is connected to your computer via USB, as it will automatically share the connection via USB.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
When Personal Hotspot is enabled, your iOS device automatically shares your Internet connection with your computer when connected using USB.
Example: When you connect iPhone to your computer to charge or sync with iTunes. To avoid unnecessary data charges, turn off Personal Hotspot when not in use.
Cheers,
Allen -
HT201415 My iPhone is not having wifi connection anywhere
My iPhone is not having wifi connection anywhere
Hi PamelaVR,
Thanks for visiting Apple Support Communities.
I recommend starting with these troubleshooting steps if your iPhone battery is not behaving as you'd expect:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
From:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
Jeremy -
Why does my iphone 4 keep dropping wifi connection since ios5.0.1update
Why does my iphone 4 keep dropping wifi connection since ios5.0.1 update, it worked perfectly before, my wifes 3gs connects fine and stays connected while my £400 paperweight losses connection, thinking of going back to nokia! Sort it out apple!
If the "oh so Great Apple" were to monitor these forums then they might see all the problems
that the people who have paid good money for their devices are having, i suppose they can do no wrong
In your eyes, i just thought that if you pay a lot of money for a product that works fine, and you update
It with a firmware update that they kept going on about how good it was and it can do this and it can
Do that, then i think they should sort it out. I don't care if i "don't deserve to be an apple owner" or not,
The fact is i paid my money and it should do what its suppose to do, i moved from Nokia to Apple because
The N97 was crap and i put up with it for too long, and they didn't do anything to fix the bugs they just stopped
Selling it and basically said tough s**t, so now this is happened i hoped Apple whould be better but they seem
To be just like the rest. -
please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!
With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal. -
IPhone 4 keeps loseing wifi connection
Iphone 4 keeps loseing wifi connection and none of my other household devices lose connectivity. How do I fix this?
Same here. Issue is with random routers not in same household.
5.0.1 issue needs an update soon! -
Cannot access work emails overseas via wifi
I have both a work IPad and IPhone which I have taken with me overseas for work and I have repeated these steps on both devices several times utilizing several different WiFi locations:
When I arrived overseas I switched off mobile data so I am not charged roaming rates etc
I found a free wifi connection and successfully connected to this
I went into CISCO AnyConnect: AnyConnect VPN "on" ; STATUS "connected' ;tick is shown next to iOSMobilrVPN-FF
I go into my emails and load it up as per normal but it tells me that it has been updated when it hasn't because I have not received any emails now for two weeks isn't right because I normally get more than 30 a day.
Sometimes I get "Cannot Get Mail: The connection to the server failed" but AnyConnect VPN tells me I am connected
A colleague of mine is able to access his work emails with no issues overseas and showed me the steps above but despite my attempts I have yet to get any resolve.
Please help!Maybe:
http://www.techplex.net/postst75660_Cannot-get-Mail--Connection-to-the-Server-fa iled.aspx
Cannot get mail the connection to the server failed -
I can SSH from the outside but cannot ping ISP gateway from 2911
Hello all,
I came across a rather strange issue. I am able to SSH to the device from my home but while I am consoled in, I cannot ping the ISP gateway or any other IP's. As expected, all trace-routes fail without hitting the gateway as the first hop. I have been reading about the NVI0 interface and I decided to use it. Most of the sample cofigs on here use the "old" ip nat inside / outside on the appropriate interfaces. What do you guys suggest?
Here is the running config. It is rather simple since i did not add all the access-lists except the ones I thought necessary to test the circuit. Please point out any mistakes or errors. Thanks in advance!
Current configuration : 1679 bytes
! Last configuration change at 04:05:17 UTC Fri Sep 12 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname StandbyGZ-2911
boot-start-marker
boot-end-marker
enable secret 5 $1$BRaM$igChPMXLeHjgYR7EGk/Nb/
no aaa new-model
no ipv6 cef
no ip source-route
ip cef
no ip domain lookup
ip domain name StandbyGZ.local
ip name-server 211.136.20.203
ip name-server 211.139.136.68
multilink bundle-name authenticated
license udi pid CISCO2911/K9 sn FGL174410H9
username StandbyGZ secret 5 $1$CXWC$m6kqTGbf0HDLCvkfU7.RA/
ip ssh version 2
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/1
description UPLINK TO CHINA MOBILE
ip address 183.x.x.x 255.255.255.128
ip access-group REMOTE-ADMIN-ACL in
no ip redirects
ip nat enable
duplex auto
speed auto
interface GigabitEthernet0/2
description CONNECTION TO LAN SWITCH 3650-CORE
ip address 10.10.1.254 255.255.254.0
no ip redirects
ip nat enable
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat source list LAN-NAT-ACL interface GigabitEthernet0/1 overload
ip route 0.0.0.0 0.0.0.0 183.x.x.x
ip access-list standard LAN-NAT-ACL
permit 10.10.0.0 0.0.1.255
ip access-list extended REMOTE-ADMIN-ACL
permit tcp host 68.107.195.213 any eq 22 log
control-plane
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
exec-timeout 0 0
logging synchronous
login local
transport input ssh
transport output ssh
scheduler allocate 20000 1000
end
StandbyGZ-2911# sh ip int br
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/1 183.x.x.x YES NVRAM up up
GigabitEthernet0/2 10.10.1.254 YES NVRAM up up
NVI0 183.x.x.x YES unset up up
StandbyGZ-2911#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is 183.233.184.129 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 183.233.184.129
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.10.0.0/23 is directly connected, GigabitEthernet0/2
L 10.10.1.254/32 is directly connected, GigabitEthernet0/2
183.233.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 183.x.x.x/25 is directly connected, GigabitEthernet0/1
L 183.x.x.x/32 is directly connected, GigabitEthernet0/1Hi Chris,
That is what how I am used to configure the NAT, but IOS 12.3 and on introduced interface NVI0, which according to cisco documentation should make applying the NAT statements "easier". IP nat enable has to be enabled on all interfaces and then NVI0 makes the "inside" and "outside" decisions. I was hoping that someone could clarify the real use of that NVI0 interface and if it causes problems. Apparently it cannot be removed from the config. -
Downloading from Itunes via Wifi & Syncing to 2 Macs
I want to download some music on my iphone via itunes. I have two mac computers an Imac and a Macbook. My question is that will my iphone sync the music I download via wifi itunes to both my mac computers when I connect my Iphone to Each of them? I just bought the macbook and have never plugged my iphone into it yet. I guess my second question is can I even plug my iphone into both computers so I can have my itunes insync on both computers?
thanks for the reply. Will the music that I downloaded on my iphone via itunes wifi sync to both my computers when i connect the iphone? or will it only sync the songs I download on my iphone to the first computer I connect to? i thought i heard somewhere that it doesnt transfer songs from the iphone to your mac, only from your mac to the the iphone. But if I use the itunes wifi to download my music I heard that it will sync back to itunes my mac. I'm just trying to figure out how to get the music I download via itunes on my iphone to sync to both my mac.
Maybe you are looking for
-
Can web.show_document use a Windows filesystem-style URL?
Hi, I need to open Word documents from Forms9i. The docs are on a Win2k fileserver located on the same LAN with the user desktops, while the Forms 9iAS server (a Win2k box itself too) is remote, over a WAN link. The folder in the fileserver where the
-
How do I close the aps that stay open on the "updates" page
How do I close aps that stay open on my "updates" page
-
Hi all, I just bought my laptop a few weeks ago. Initially explorer only crashed (with the ntdll.dll error) when I had a lot of folders open, or when I was transferring stuff. But now I cannot open any folders at all without it crashing with the veri
-
Lightroom 2 trial, how do i go back?
Hello all helpful adobe users :) I thought I'd like to give the new version of lightroom a try, so I downloaded a trial. When I installed it, I recall that i chose for lightroom to convert my library, Im not quite sure though. Then one day, I acciden
-
Can we summarize paragraphs in Safari like we used to
can we summarize paragraphs in Safari like we used to