Cannot ping windows 2008 r2 while it is possible for another machine in the same network
Hi,
Recently I have set up a new server with windows 2008 r2 enterprise OS which is a domain member server.
At network layer I have two networks one with 192.168.1.0/22 and another with 10.0.0.0/24 network IDs.
My problem is that I cannot ping the newly installed server from a specific machine. Server's IP address is 192.168.1.56 and the specific machine's IP address is 10.0.0.12 and it is a windows XP machine. Of course I have to say that this problem belongs
only to this WinXP machine and all the layer 3 issues are tested and correct. This issue happens while at the same time I can ping domain controller which also is a windows 2008 r2 enterprise box and its IP address is 192.168.1.53. It turns more complicated
when I learned I can ping the winxp machine and connect to it from new server through remote desktop. Firewall also is not the obstacle because I turned it off completely.
Can anybody help me fix the problem?
TIA
Bijan
Hi,
Check the path ping from xp machine to server its timing out after reaching 192.168.1.254 , What kind of a device is 192.168.1.254 IP belongs to.
Tracing
route to sp45newfs.ph45.local [192.168.1.56]
over
a maximum of 30 hops:
0 B15-333.PH45.LOCAL [10.0.0.12]
1 192.168.1.254
2 * * *
Computing
statistics for 50 seconds...
Source to Here This Node/Link
Hop
RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 B15-333.PH45.LOCAL [10.0.0.12]
0/ 100 = 0% |
1 0ms 0/ 100 = 0% 0/ 100 = 0% (192.168.1.254)----------(Which device has this IP)
100/ 100 =100% |
2 --- (100/ 100 =100% )---(100% loss) 0/ 100 = 0% B15-333.PH45.LOCAL [0.0.0.0]
Trace
complete.
Regards,
Srivishnu.K
Similar Messages
-
I cannot connect my Macbook to Epson printer XP 400. Both are on the same network and Symantic anti virus is disconneted.
Add printer does not find the Epson. All works when I use the USB cable.Further information on my question about the epson wireless printer and macbook.
It seems that the epson xp-400 works wirelessly only with 802.11n wireless network not with 802.11g or earlier.
Does anyone else know about this. I read it on the epson support site for epson xp-400.
Also epson xp-400 will not work wirelessly if it is already connected to a computer with a USB cable. -
I am having the same issue as posted in http://social.technet.microsoft.com/Forums/windows/en-US/6ea57e5f-6e9d-49bd-9dd7-832ea84c0276/windows-81-pro-will-not-join-domain?forum=w8itpronetworking
There are a few other people have the same issues. However there was no real solution provided although the post was marked as answered. I am posting it here again and hopefully I can get some help to solve this issue.
We got two new PCs, one with windows 7 and the other with windows 8.1 Pro. In the same network with domain, the windows 7 pc has no problem at all to join the domain. However the windows 8.1 Pro won't join the domain. On the windows 8.1 Pro computer,
I can ping the other computers in the network. The error message says:
An Active Directory Domain Controller (AD DC) for the domain "cmi" could not be contacted. ...
In my case, the domain name is "CMI". I am sure the DNS setting is correct. What did I do wrong? Any help is greatly appreciated. Thanks.I tried the solution in that article.
In HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters folder, there is no
NeutralizeNT4Emulator. So I followed the instructions and created one, and set the value to 1. Then I restarted the computer and tried to join the domain again. I got the same error. Below is more from the netsetup log file:
06/04/2014 21:36:37:256 -----------------------------------------------------------------
06/04/2014 21:36:37:256 NetpValidateName: checking to see if 'XPS8700' is valid as type 1 name
06/04/2014 21:36:40:256 NetpCheckNetBiosNameNotInUse for 'XPS8700' [MACHINE] returned 0x0
06/04/2014 21:36:40:256 NetpValidateName: name 'XPS8700' is valid for type 1
06/04/2014 21:36:40:256 -----------------------------------------------------------------
06/04/2014 21:36:40:256 NetpValidateName: checking to see if 'XPS8700' is valid as type 5 name
06/04/2014 21:36:40:256 NetpValidateName: name 'XPS8700' is valid for type 5
06/04/2014 21:36:40:256 -----------------------------------------------------------------
06/04/2014 21:36:40:256 NetpValidateName: checking to see if 'cmi' is valid as type 3 name
06/04/2014 21:36:40:272 NetpCheckDomainNameIsValid for cmi returned 0x54b, last error is 0x0
06/04/2014 21:36:40:272 NetpCheckDomainNameIsValid [ Exists ] for 'cmi' returned 0x54b
----------------below is the error message from the pop up window
Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
The domain name "cmi" might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "cmi":
The query was for the SRV record for _ldap._tcp.dc._msdcs.cmi
The following domain controllers were identified by the query:
cmi-dc2.cmi
cmi-dc1.cmi
However no domain controllers could be contacted.
Thanks. -
Using Adobe 11 reader, now comes up with an error, once file is opened. 'Invalid plugin detected, Adobe reader will quit. Closes the program so cannot view PDF files. Running windows 7. I have uninstalled and re-installed Adobe still the same. HELP
Sounds like something has been added into the Reader folder. I would recommend uninstalling, running http://labs.adobe.com/downloads/acrobatcleaner.html, removing any left over parts of the Reader folder (this might have been the problem), reboot, and reinstall. Hopefully that solves the problem. For future question about Reader, you should consider asking in the Reader forum, this is not it.
-
I have never previously had any problems with Home Sharing, I have always found it to be completely reliable as advertised. I have 2 computers in the house, (one MacBook and one Windows Desktop) connected to the same Home Sharing account, connected to the same BT Home Hub 4. My situation is that I have nearly 2TB of data of which I would like to share with the home wirelessly, in my mind the desktop is the logical place for this to be shared from.
When running, iTunes on this desktop broadcasts to other iTunes libraries, but no other iOS devices or Apple TV's connected to the same Home Sharing account cannot see it.
I have tried turning Home Sharing off, and then turning it back on, closing iTunes, restarting the computer, going to Network and Sharing Centre and unticking IPv6 in the network adapter properties, even completely wiping the computer and reinstalling Windows 7.
One of the Apple TV's in the house was recently purchased by my parents with the promise from me that everything would work seamlessly... so far it isn't and I am frustrated that the Apple technology that I have come to rely on isn't working as expected.
One thing that has occurred to me upon writing this is that it is a very large amount of data, and I have not attempted to share this with another computer that is currently working and broadcasting it's Home Share fine.
I am sorry if I have ommitted any important details, any further questions don't hesitate to ask. I would be so grateful of any suggestions, my parents are depending on me.I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time! -
Cannot open 2 Virtual Machines at the same time to access the same Database
Folks,
Hello.
I am installing Oracle Database 11gR2 RAC system using 2 Virtual Machines (rac1 and rac2) on the top of VMPlayer 3.
The VM rac1 and rac2 run correctly when one of them is shutdown.
Their locations are F:\VM_RAC\rac1 and F:\VM_RAC\rac2.
While rac2 is running, I open rac1. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
While rac1 is running, I open rac2. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
The 2 error messages are the same. This means I cannot open 2 VMs rac1 and rac2 at the same time. When we run RAC system, we have to open 2 machines or more than 2 machines at the same time so that all machines can access the same Database Server.
My question is:
Can any folk tell me how to have rac1 and rac2 run at the same time ?
Thanks.You need to disable disk locking, which ordinarily is performed by the first VM to prevent any other VMs from corrupting your vmdk files via uncoordinated writes. You will have to shutdown both of your VMs and edit the *.vmx flat file for each, adding lines like the following (settings taken from workstation 6, but should be nearly identical settings for VM Player 3.x):
http://crosbysite.blogspot.com/2007/10/clustering-in-vmware-workstation-6.html
scsi1.sharedbus = "Virtual"
disk.locking = "false"
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.dataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "4096"
diskLib.maxUnsyncedWrites = "0"
A few comments:
- your shared disks (scsi1) must be on a separate virtual scsi bus than the boot disk (scsi0), to allow setting the sharedbus flag as seen above.
- you must also ensure the cache parameters and unsynced writes settings are set to guarantee that all IO is immediately flushed to the vmdk file so the other VM can immediately access the latest version of data. -
Navigate to another application in the same window
How can I navigate to another application in the same window? I know how to open in a new browser.
Also, I cannot give a linktourl UI. I have to do it on click of a button.
I can get the URL. How to go there now?
Thanks in adv.Hi Shweta,
You can get a URL to a webdynpro application and also navigate to it. I used below code snippet,
METHOD onactionclick .
* Data Declarations
DATA:
lr_ref TYPE REF TO ig_ZWDA_APP1,
str TYPE string.
*Get the URL of the Application
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
application_name = 'ZWDA_APP2'
IMPORTING
out_absolute_url = str.
*Reference of Window
lr_ref = wd_this->get_ZWDA_APP1_ctr( ).
* Fire Exit Plug
lr_ref->fire_go_exit_plg(
url = str
ENDMETHOD.
u can modify it so that ur current application is not closed or that new application gets launched in seperate browser window.
Greetings
Prashant -
Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?
Load the airport utility for windows.. it has several parts.. the key one is bonjour for windows which helps windows find apple network devices.
The TC should also be setup with names that windows can use.. ie short, no spaces and pure alphanumeric.
So Fred Blog's Airport Time Capsule
Is not a valid windows name.
TCgen5 is. -
no matter how many times I ask T'bird to check for new mail I get back ANOTHER copy of the same message dated 7:28am and NO MAIL received after that reaches my INBOX. On my other PC running Windows 7 only ONE copy of the 7:28am transmission arrives as does all subsequent email sent to me at this address... both PC's are protected by Avast anti-virus software. Turning the rogue PC off and on did not help nor did uploading and installing an updated version of T'bird.
Are the setup the same? same accounts, same folders, same messages, same filters same add-ons?
If that the case make a copy of the good profile and replace the bad one with that. -
An interesting observation...when I have a MacBook Pro connected and select Computers on my AppleTV2, the name of the MacBook computer comes up on the screen and allows me to select it and view photos from my iTunes library. Orks perfectly. When my Windows 8 PC is connected, and I select Computers on my AppleTV, the name of the PC does NOT come up on the computer list, but instead the AppleTV immediately tries to download pictures from the PC itunes library. It runs for ~2 minutes then generates an error message saying it could not connect to the iTunes library and to make sure it is tunrned on, connect to the same network, and use the same blah, blah, blah. I know all the settigns on the network are correct because my MacBook works perfecty. So frustrating that my PC worked previously before the recent iTunes software update. What to do to fix it?
Hi Rickgal,
Thanks for visiting Apple Support Communities.
Based on the information, it does sound like this behavior is isolated to your PC. I recommend trying the troubleshooting steps in this article on your PC:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Start with turning Home Sharing off and on again, as explained in step 3:
Go to File > Home Sharing and choose Turn Off Home Sharing.
Choose File > Home Sharing > Turn On Home Sharing.
When prompted, enter the Apple ID you'd like to use.
Click Turn On Home Sharing, then Done.
Best Regards,
Jeremy -
We've got them authenticating/binding with AD (after hours of troubleshooting to get working), and their Home drive on the Windows 2003 server loads in the dock, but they also want to be able to load the same network shares on the server e.g. "Students$" for every student that logs onto the iMac. I realise without Lion server we can't control it by group, but if we could at least set it up consistently for the students that would be a great start.
Thanks.When you install you get the opportunity to install it for "All Users".
It sounds like you have a demo version on your Mac however, you need to delete it:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
Peter -
How to open another iView in the same window
Hallo,
I user following code for opening iView:
String iView = "http://server/irj/portal?NavigationTarget=ROLES://portal_content/example";
this.getForm().addRawText("<SCRIPT>\n");
this.getForm().addRawText("EPCM.doNavigate('" + iView + "',"
+ "'1',"
+ "'toolbar,menubar,resizable,scrollbars',"
+ "'',"
+ "'',"
+ "'',"
+ "''"
+
//","+
");\n");
this.getForm().addRawText("</SCRIPT>");
... but this open iView in new window. I'd like to open iView in the same window as the primary iView.
Best Regards,
Josef MotlHello all:
And... How could I show some i-views with another contents in the same page, like this?
photo
IVIEW
photo
IVIEW
Thanks,
Alejandro.
P.D.: Excuse my poor English. -
I have a MacBook Pro running 10.6.8.
I have a wirelessly networked printer (HP PhotoSmart D110).
All worked well until a couple of months ago.
For reasons unknown, I stopped being able to print wirelessly to the printer from the Macbook. It appears as offline on the HP Photosmart utillity that pops up.
I can print to teh same printer from a Windows PC on the same network.
I have also logged onto the printer, using it's IP address and printed its test page, so obvioulsy not a printer fault as such.
The old PowerBook on the same network doesn't print to it either.
Grateful for any thoughts for quick tests or tips.
Paul.Nice one Ron, you're a star.
That was a complete fix.
My preferences was slightly different, but it was the same approach.
I had 4 printers listed. Some old ones that I no longer had and the one that didn't work. I deleted all of them, then hit '+'.
It came back up, searched for new drivers, then I was able to print as per normal.
Result.
Paul -
I try to open up another webpage on the same window, by clicking on the + Tab Button next to the current webpage Im viewing. For some reason it will not do anything. It will not open up.
This problem has been associated with the Ask toolbar. You could try disabling it here:
Tools > Add-ons > Extensions
You may want to update to 3.6.17 to take advantage of security fixes. -
The latest version of itunes on my imac keeps quitting while playing through apple tv. Anyone having the same problem?
Are you downloading iTunes form an Apple website or somewhere else? If the answer is somewhere else, try downloading it from Apple. Click on iTunes in the black menu bar above and go from there.
Let us know what happens.
Maybe you are looking for
-
Interactive quicktime movie from keynote doesn't stream correctly on web
hello, Any help with this would be extremely appreciated as I've been trying to solve the problem for 3 days straight. I've created an interactive slide show in keynote and now want to stream it on my website. The problem is that the finished product
-
I bought my macbook a year before snow leopard came out. I have since upgraded my OS to S.L. and I am buying windows 7. i want to know if I can us my OS start-up disk (which has OS 10.5 [leopard]) or do I need Snow Leopard to complete the process
-
Bought song, but they wont download. how do i get them to download?
i Bought 4 songs but they wont download. they are in that download file but they dont do anything. i tried hitting resume all but it doesnt do anything. how do i get them to download?
-
Version Change in User Exit , Customer Exit, Screen Exit
Hi All, If Version change then whether the user exit, customer exit & screen exit will remain same? or what needs to be done for that?. Regards, Abhijit
-
How to find PIP element of a Proyect or PEP element ?
Hi, I need to know how can I get the PIP elements information of a specific Proyect, knowing the Project or the PEP Element. There is any FM, Bapi or any1 the Table relation to get this data ? Thx