Cannot play MP3 after playing WAV

My iPod Nano is already updated to the latest verison of software. However, in every time, after listening to the WAV files, it would be skipping files when I tried to play the MP3 files again. However, the reverse process is ok. That's very annoying for us to reset the iPod nano everytime. Can it be solved by updating the software? Thank you very much for the solution.
Winson Wong

Check these out:
Songs That Skip On iPod
iPod Does Not Play Content from iTunes Music Store
I hope this helps!

Similar Messages

  • Cannot play .wav file in ICM script

    Dear all,
    I wrote a cript that plays a audio file ( .wav). That file is in correct audio format ( 64kbps, 8bit, 1 mono, 8kHz, CCITT u-law).
    As you can see in script, all test calls from PSTN after jumping to Run Ext. Script  are going to End node ( number 27). And from mobile test, i cannot hear any sound from script.
    So, what is cause here? Thank in advance

    I'll have to go on some assumptions since you don't have a lot of info here.  Someone probably created a generic IPIVR script that performs similar functionality to the micro apps in CVP using peripheral variables as input.  If an error is occuring, it is happening in the IPIVR and you will need to look at the MIVR logs to see what is causing the error.  As for the path that the call takes once it exits the run external script node, that is set within the IPIVR script using the Set ICM Result step.  Set it to true and it exits the success leg or set it to false and it exits the failure leg of the node.  I'm guessing that you are probably not looking in the correct directory for the wav file and that is why it is not playing.
    Ed

  • Cannot Play Wav file

    Hello,
    I have a T850 and when I receive a voice mail message at work it emails my outlook and since I am synced I get the email and the message as a wav file on my T850. The Wav file opens but there is no sound, however the sounds works when viewing a tube video over the web on the same phone. Does anyone have any ideas on how to correct? Thanks!
    Post relates to: Treo Pro T850 (Sprint)

    nmartinez wrote:
    The Wav file opens but there is no sound, however the sounds works when viewing a tube video over the web on the same phone.
    I would expect a WAV to open in the Windows Media Player. Is that what happens? Does the Media Player correctly play MP3s (e.g., on a microSD card)?

  • Cannot play .wav files attached to email

    I see on page 50 of the iPhone manual that .wav files are supported, however, they do not play. The error I get is "this movie format not supported". Does anyone have an answer that will help me?
    Thanks!

    did you find a resolution for this? I have the same issue on my business wav email accounts, but my home wav email account works fine.

  • Cannot play wav files through Quicktime 7.6.6 embedded object

    We are playing voice messages on the web page using QuickTime player .
    We have embedded QuickTime object in the web page to play the messages
    We are facing an issue with playing of voice messages with the latest QuickTime version 7.6.6. These messages are playing in the previous versions of the QuickTime.
    We tried to update the classid for the latest QuickTime version while embedding the object but we are not able to hear the messages, also we are not getting any error or exceptions.
    We are able to hear the messages after downloading it locally using the new QuickTime version.
    Let us know the resolution

    http://developer.apple.com/internet/ieembedprep.html

  • I cannot play mp3 file on itunes after i recover it from an external hdd

    hey guy'z i need a little help here
    i have a large mp3 file from an old 2TB which had a problem and then recovered and transfered to a new ext hdd.
    now after the recovery was done and i'm trying to play my music on the itunes it wont play
    any solution guys?
    and another thing is the wma file why i cant i play it also on my itunes?

    iTunes cannot play WMA files.  Use a conversion program such as Switch or EasyWMA to convert the WMA to MP3 or AAC.
    For your problem MP3, make sure it is a valid file by playing it in another player such as QuickTime.  If it plays there but not in iTunes, then it needs to be cleaned up with a program such as MP3 Validator.

  • After upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer or even off my iTunes library

    after upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer, love film or even directly off my iTunes library. in each case, all i get is a black screen and no error message.

    Hi, i had the same problem and tried this,
    Somehow iTunes is tied to Safari. Try this:
    Someone mentioned to clear all website data and history in safari, stupid but it was either this or the below that fixed it
    or this,
    Disable Wi-Fi Networking Services
    Many users have reported that they’ve solved their issues by disabling Wi-Fi Networking under Settings > Privacy > Location Services > System Services. This only relates to your location being used for Wi-Fi Networking, so it doesn’t disable Wi-Fi entirely.
    Please let me know if it works.

  • Previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

    previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

    previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

  • Cannot play MP3 files in Dreamweaver CS4

    Hi
    Apogogies if this has been asked before.
    I have an embedded MP3 file on one of my DWCS4 pages but when I try to play it from the Properties Inspector I get the message "Unable to find the plugin that handles this media type".
    The sound file plays OK in Firefox and IE but I would like to be able to test it in DW. I have the currrent version of Apple QuickTime Pro installed.
    I am using both Windows XP and Vista with the same problem.
    Is there a plug I can download for DW only in order to play these files without resorting to converting the MP3 to another format.
    Any help would be much appreicated.
    Thanks
    George

    Yes but I did exactly what I accused you of doing so it was really bad!
    Software troubles can drive you a bit crazy. Sorry again.
    From: pziecina <[email protected]>
    Reply-To: <[email protected]>
    Date: Thu, 08 Oct 2009 09:16:11 -0600
    To: d maass <[email protected]>
    Subject: Cannot play MP3 files in Dreamweaver CS4
    Hi
    Thank you for the apology, but as we have all (probably), misread and
    therefore wrongly replied to posts, it is not really necessary.
    PZ

  • I changed my email address and now cannot play items purchased with previous email. This only became a problem after I got a new computer. The original email address no longer even exists. How can I access these hundreds of items?

    I changed my email address a few years ago. I did not have any problems after this change until I got a new computer. Now I cannot play items that were purchased under the previous email. I entered the password that I used and it doesn't recognize it. I tried "forgot your password" in every combination possible. I never received any emails at the old email address. Now the old email address no longer even exists. How can I access these hundreds of items?

    The old email address may well still be valid as your iTunes AppleID, however if you have no other email associated with that ID you clearly won't get any automated emails to it.
    I still use an old defunct email for my iTunes AppleID.
    Contact support here:
    http://www.apple.com/support/itunes/ww/
    You may want to try to manage the old ID here:
    https://appleid.apple.com/
    Use the original email address and password.
    AC

  • HT2471 After installing Java 7 on my iMac OS X Lion I cannot play certain games in pogo?

    After installing Java 7 on my iMac OS X Lion I cannot play certain games in pogo? Please, help me.

    Oracle's released update 7u11 which fixes the exploit.

  • After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

    After software update, I can see the songs on iPod nano in iTunes, but I cannot play/move the songs from iTunes.

    Is the "software update" for iTunes 12?  Or something you did to the iPod?

  • I cannot play videos anymore after last adobe flash update

    I cannot play videos anymore after the last adobe flash update. The screen shows "plug-in failure".

    What system are you running?  There's a problem with current Flash 13 version. You can download an earlier 12 version here: Archived Flash Player versions
    OT

  • My music player and whole programs cannot play and open anymore after contain with computer!!!!!why????

    My music player and whole programs cannot play and open anymore after contain with computer!!!!!why????

    No clue what you are trying to communicate or what this has to do with using an iPhone in a Enterprise (Corporate) environment.
    Try reposting in your native language.

  • Cannot play podcast contiguously after iOS 5

    Since updating my iPad 2 to iOS 5, I cannot play podcast epsiosdes within a series contiguously (one after the other in an uninterrupted manner).
    It doesn't play the next one in the series.
    I have to tap on the next one before it will play.
    Is there a Work-Around or a fix to this?
    Thank You.
    Mark Denton

    I don't know if this is your problem or not; but shortly after I updated my devices to IOS 5; I had trouble connecting to wifi. Here's what was screwy:
    MAC and Macbook Pro would only connect if they were in the same room as the router; as soon as I carried them out, they would drop off and then ask for the password, which it would not recognize.
    iPhones would not connect, although the network was there, they asked for the password, and siad it was wrong; whether I was in the same room or not.
    iPad stayed connected throughout the whole house.
    Wierd eh?
    Okay so today I took my Time Capsule o the genius bar was told that the virtual port had to be reset; and that it had nothing to do with IOS 5.  So using the Airport Utility (Applications>Utilities) they disconnected my network and created a new one...and everything works perfectly.
    So give that a try and good luck!

  • After I updated to iOS 7, I cannot play music on my Bose soundock how?

    After I updated to iOS 7, I cannot play music on my Bose soundock how?

    mine is the first gen, i hope they can update the software. Thx! im going to the shop tmrw!

Maybe you are looking for

  • How to silently install Reader 9.3.1 RPM in RHEL 5.4?

    I am running Red Hat Enterprise Linux Server 5.4 (32-bit). I need to install the AdbeRdr9.3-1_i486linux_enu.rpm on multiple machines nearly everyday. Is there a way to install this RPM silently? In other words, accept the license agreement from the c

  • Function of attribute node "palette type - grayscale"

    Hello, i wanted to ask you, what the function of this attribute node "palette type" (grayscale) is? It is included in (almost) every VI, created in Vision Assistant.

  • How to optimize my computer performance?

    Thanks to the tweakers page, and many admins here, I've built my beast machine 6 months ago and it's great! I just want to know however, is there a way to see if there is a bottleneck in the system, or if something can be simply changed/upgraded to i

  • How to know a model member's index ?

    I have imported a 3D model from google sketch up. I want to know the index of each model component. For. e.g if i import a car model from sketch up i want to know which index is the wheel. Below is the lingo code. I want to use this index in step a (

  • Swapping Windows files/potential virurses  between a Mac and Windows

    I recently have had to start moving/editing file (via usb a memory stick) created by the Mac version of Microsoft Office on my Macbook so they can be used by Open Office on a Windows based network of computers and was just wondering what people thoug