Cannot play rented movies error 42110, cannot play rented movies error 42110

cannot play rented movies error 42110, cannot play rented movies error 42110

Try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Similar Messages

  • HT1657 I rented a movie and now I cannot figure out how to watch it on Apple TV.  We did the update yesterday.  I used to go under the "Movies" tab and click Play.  It has the original options now and when I click "Rent" it says already rented, not downlo

    I rented a movie from ITunes yesterday and now I cannot figure out how to watch it on Apple TV.  I have done this before, and to watch it later on, I would go back under the "Movies" option, find the movie, and there would be a Play option available.  We did the update to Apple TV yesterday.  Now when I go back to the movie, I see the original options. Preview, Rent, Buy, etc.  When I click on Rent again, it says the movie has already been rented but not downloaded. It instructs me to go under Settings/Downloads/Check Downloads, but there is nothing under Settings about Downloads.  I found an option to Check for Rentals, but when I click on that option, it just keeps searching, with no results.  Any ideas?  This worked before the update, even though it took forever to download a movie....

    I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
    SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
    Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

  • HT1657 I cannot play my rented movie because itunes cannot locate where the original file, has anyone face this problem before? Where can I find the location of the downloaded movie?

    I cannot play my rented movie because itunes cannot locate where the original file, has anyone face this problem before? Where can I find the location of the downloaded movie?

    What did you use to download it with? iPad? iPhone? Computer?
    If it's an iPad/iPhone, play it using the videos app.
    If on the computer, look on the left side of iTunes in the library under movies.

  • Created a movie in IMOVIE and transferred it to dvd but cannot get it to play on my dvd player.  i downloaded the free Burn program since i don't have idvd on my new mac  the dvd comes up disk error or cannot read

    created a movie in IMOVIE and transferred it to dvd but cannot get it to play on my dvd player.  i downloaded the free Burn program since i don't have idvd on my new mac  the dvd comes up disk error or cannot read.  I am using a dvd-r dvd and my dvd player says that it uses this type of dvd.  Any suggestions.  I spoke to an Apple Support person who helped me burn the dvd but it still didn't work...help???

    There's a difference between a data DVD, and a DVD-Video.  I believe you made a data DVD, which can't be played in a video player.  The Burn feature of the Finder can't author a DVD-V, just data discs.   
    I assume you made a Project, and put clips from your Event Library into the Project.  But then, how did you output your Project, using the SHARE menu? 
    When I pull down iMovie '11s SHARE menu, "iDVD..." is one of the options.  It's the job of iDVD to make the menu that appears when you insert a DVD into your player (that says the title, and chapters, and extras, etc.).  You need software that will made a DVD-V disc.  Lacking that, you might be able to go to Share/Export Movie... or Share/Export using QuickTime... to get your video into a format that software like Roxio's Toast could burn. 

  • Error - "Cannot play movie: Movie could not be played"

    Hi all,
    I'm trying to stream an MP4 video on my iPhone 4 (OS 4.2.1), which I could do with no problems before. For some reason I am now getting the error "Cannot play movie: Movie could not be played". I have tested this URL on a PC web browser and it streams fine. I have tried over the 3G network and wiki... same result.
    Has anyone experienced this and / or has a resolution?
    Thanks,
    Dave

    take a look at this thread and see if it helps:
    http://discussions.apple.com/thread.jspa?threadID=2691633&tstart=25

  • My videos are defaulted to Quicktine and I have downloaded the latest QT player but all my movie clips now cannot be played and I get this error message Error-2002 a bad public movie atom was found in the movie.

    I have used quicktime player downloads for movie clips made for equipment inspections.  However in 2011 I encountered a problem when trying to view previously made movie clips that are in the quicktime player format but they won't play giving the messgae : Error-202 a bad movie atom was found in the movie,
    I have downloaded the latest Quicktime player but the problem still remains.  However late in 2011 when this problem was encountered I downloaded the the latest QT player download and then could play the movie clips but now the problem is back.
    How do I fix this problem.
    Regards
    Richard

    Hello,
    This doesn't really solve the problem, but why don't you ask your colleague to resave or export test.3gp?
    The new file will probably work. (vs troubleshooting your Windows PC can take ages, to no avail)

  • Movie rental won't play, says operation cannot be completed

    Hi, I've rented a movie from iTunes and watched it once, it said I had 48 hours until it expires and I thought I could watch it again? But now when I go to play it, it comes up with an error "operation cannot be completed" and will not play. Does anyone know what I can do? Thanks

    If you are in the states, you may be able to re-download for free. The file may be corrupted.

  • HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

    We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
    Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
    Help!

    We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
    Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
    Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
    That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

  • Have rented a movie from iTunes but keep getting an error message cannot load film

    I have downloaded a rental movie to my iPad started to watch it and it gave me an error of cannot load film, have tried deleting the film from my videos but cannot do that either, when I go back I to iTunes to start the process again it immediately tries to play the film but the same message come up. Any ideas?

    Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
    Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand.

  • I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental "A Thousand Words" because it is authorized to play on another computer or device." any ideas?

    I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?

    Rentals can only play on one device/computer at a time.  Have you tried to play on the computer and still have that window open?
    Have you transferred the rental to iPod/iPhone or iPad to watch?
    If it won't play anywhere contact iTunes support at:
    expresslane.apple.com
    AC

  • HT1390 I did all the steps in this article but I get the msg:  "Movie Title" was not copied to the iPad because it cannot be played on this iPad.  The moive never moves over.  What gives?

    I did all the steps in this article but I get the msg:  "Movie Title" was not copied to the iPad because it cannot be played on this iPad.  The moive never moves over. 

    Did you download Tron in HD? If so, try syncing the SD version that came with it

  • I downloaded a movie on itunes. When I go to play movie a message from iTunes "This movie cannot be played on this comp"

    I downloaded a movie on itunes. When I go to play movie a message from iTunes "This movie cannot be played on this comp" Can anyone help?

    Hi there,
    You may want to varify that your system meets the minimum system requirements for viewing HD content. Take a look at the article below for more information.
    iTunes: Purchasing and viewing HD videos
    http://support.apple.com/kb/ht3209
    -Griff W.

  • I get an error when you play a rented movie, also happens to me with the purchased music.

    I get an error when you play a rented movie, also happens to me with the purchased music.

    Welcome to the Apple Community Jebson.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Restart the Apple TV (Settings > General > Restart).
        2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        3.    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
        4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
        5.    Restore the Apple TV (Settings > General > Reset > Restore)

  • Hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing play

    hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • HT1390 I rented a movie and it shows up in my iTunes "Rented" section, but when I click to play it, it gives me an error message saying the movie can't be played because the original file can't be found. Please help!

    I rented a movie and it shows up in my iTunes "Rented" section, but when I click to play it, it gives me an error message saying the movie can't be played because the original file can't be found. Please help!

    Never mind I fixed it. Just in case anyone else has this problem, after you reinstall iTunes you have to delete all your old music, and if you have iTunes match all the songs you have saved on itunes match will display and you just have to download them to your Macbook.

Maybe you are looking for

  • Performance of PL/SQL vs external C function.

    Do anyone know how much performance difference there is for a high computation function implemented in PL/SQL vs a external C function? I know that this is a impossible question to answer precisely. But I'm interested in peoples experiences with this

  • How to change a contacts name.

    I have been trying to change my girlfriends name in my phone. I have 2 separate contacts for her. One is connected to Facebook and the other isn't. When I change it to the new name it will show the new name on the contact list but not in a message. I

  • Physical Inventory/cycle Counting procedure in Inventory Management

    Hi everyone i have been posting some of my queries here on SDN but i never got any reply from anyone I had another question, Can anyone tell me what is the configuration steps for Physical Inventory/Cycle counting in IM, What are the IMG config invol

  • Oracle JDBC OCI doesn't work on Linux

    Hi, I'm using Oracle on Linux(RH6, kernel 2.2.13) Oracle works fine. JDBC Thin driver -OK! But java receives SIGSEV when I'm using JDBC OCI. More specific, it seems to be a problem with the so library associated to this driver, cause this SIGSEV happ

  • WLC 5508 duplex mismatch error

    Hi I've got a WLC 5508 connected to a Catalyst 6000 switch. In the switch I've get a CDP duplex mismatch error every 30 min. %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/23 with the show port command I can see this: Port  Name