Cannot power up from standby with remote

Using the microsoft remote with XP MCE2005 I cannot wake the computer up when in standby mode, are there any settings which I need to adjust?

the way i have it set up is to have only one user with no password set. that way, when windows starts up, it will bypass welcome screen and go to desktop of default user. if you have downloaded the .net framework, you should go into Administrative Tools and in the Users settings, disable the ASP.NET user that has been created
as for your other query i'm not sure what else to suggest - MCE05 could restart fine from standby usng the remote when i had my mega 651 - it doesn't on my current mega-less media center setup (prays for mega 180 to arrive soon) as it won't go to standby manually (??) - but i know the remote can't wake the computer if shut down or in hibernate

Similar Messages

Apple Remote Desktop ARD 3.7 cannot drag files from local to remote.

Apple Remote Desktop ARD 3.7 cannot drag files from local to remote. I've been able to drag n drop folders and files from my local to the remotes for years until the update to 3.7. Anyone else experiencing this issue? I've tried changing preferences. No luck. Maybe I'm missing a setting somewhere.
I'm on 10.8.5. Remote is same with 3.7 client. This happens with multiple remotes.

Let me guess. The Get and Send clibboard contents buttons are greyed out too?
It is only affecting me on clients already upgraded to 3.7. None of the clients on older versions are affected.
ARD is also crashing a lot.
Most of the time I go to a screen share to a client it takes way too long, so I clock Stop, then try to connect again and works straight away.
Hopefully a patch will be released soon.

Satellite L850-13R wakes up from standby with no reason

My L850 wakes up from standby every 10-20 minutes and after some time goes to standby again.
All power options are set as they should be (that means no wake on battery and even no wake up on power).
Problem is that this is my business notebook and I moves around with me so I could expect HD errors, not to mention battery life (I found it with dead battery this morning).
I have the latest firmware available (1.60)...
Anybody else facing this problem ?

In case anybody has similar problems one of the solutions could be:
IN registry look for
HKLM\System\CurrentControlSet\Control\CrashControl \DumpFilters
where you'll find a list of drivers that can possibly prevent standby (dumpfve.sys seems to always be there so don't touch it).
For other drivers remove the programs that installed them (I had MfeEpeHb.sys) or
do something not recommended and remove the lines with drivers you're suspecting prevent successful hibernation).
Eg. modify DumpFilters from
[DumpFilters]
MfeEpeHb.sys
dumpfve.sys
to:
[DumpFilters]
dumpfve.sys
That did the trick for me.
Hibernation tested and works without any problem

USB ports don't work after resuming from standby with Windows 8 on X230 tablet

I have just done a clean install of Windows 8 on my X230 tablet. Before installing Windows 8 I installed the most recent BIOS for this machine (version 2.50). After installing Windows 8 I installed System Update from the Lenovo Website and downloaded all the recommended drivers and other files. I've also installed all the latest Windows 8 updates.
Here are the symptoms of my problem: After resuming from standby/sleep mode, my USB ports do not work. My computer has two USB 3.0 ports and one USB 2.0 ports. All exhibit the same behavior. After resuming from standby mode I have tried inserting both my mouse and a USB thumbdrive, but neither are recognized. After restarting Windows, the USB ports work again... until I resume from standby mode again.
I hope there is a solution to this issue. It is very frustrating.

Thanks for the suggestion about tweaking the "Allow this computer to turn off this device" feature. I un-checked that box for every entry I could find under "Universal Serial Bus Controllers" in the Devide Manager. Unfortunately, the same symptoms of my problem persisted.
I went back and looked at the README file associated with the BIOS 2.50 download on Lenvo's support site. At the bottom of the file it gives a "Summary of Changes". Under version 2.03 of the BIOS (the version just before version 2.50), it says:
- (Fix) Fixed an issue where USB device might not detected when system resume from sleep mode.
This indicates that Lenovo support was already aware of such issues. The problem was intended to be fixed in version 2.03 of the BIOS. However, the issue persists on my machine, even with the latest BIOS.
Hopefully someone from Lenovo can comment here.

Extract Data in Power Pivot from MDX with diffrentnt different Level of Hierarchy in MDX

Hi All,
My requirement is to extract the data form tabular model and put in power pivot,as all the measures calculation is present in model just extracting the aggregated data.
Issue is appearing on Rolling up the data, so is there any way to extract the data so that it will display the right data on different level. As per the below example on level 2 data is getting summed up which is not correct.
Ex:-
Level1
A
10%
B
20%
Level2
30%
Thanks Chandan

Hi Chandan,
According to your description, you create a SQL Server Analysis Services Tabular model and extract Data in Power Pivot from MDX, the problem is that the hierarchy data rolling up base on the hierarchy level, right?
I have tested it on my local environment, we cannot reproduce this issue. So as per my understanding, the issue can be cause by the hierarchy setting in your tabular model. Here are some links about how to create and manage hierarchies in a tabular model,
please refer to the links and check if the settings are correct.
http://msdn.microsoft.com/en-in/library/hh213003.aspx
http://www.youtube.com/watch?v=qKKNY1Vj_2c
If the issue persists, please provide us more information about you hierarchy creation steps, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Cannot print coupons from SmartSource with FireFox 3.6.14

I was just upgraded to Firefox 3.6.14 and suddenly I cannot print coupons from SmartSource. I keep getting the message that Java is disabled but it is not. I uninstalled Java and reinstalled it and still get the problem. I can successfully print from Internet Explorer.
I've never had a problem with this until the 3.6.14 upgrade. On the Java web site, it said if you're getting an error message and you recently upgraded Firefox, download an update so I did that too. No help. I've restarted Firefox after each change.

There's a Bug in 3.6.14 with Java. A quick patch is being tested for a 3.6.15 release, but no date is set for that release. Probably early next week.

Iphone cannot connect to itunes library with remote app

My iphone remote itunes app worked before, but i think since the software update it no longer connets to my itunes library. I can pair my iphone with my itunes no problem, but it thens sits trying to locate library and then stops with "cannot conect"

iOS devices do not show on the ATV in any capacity.
Turn on HomeSharing on the ATV using the physical remote. The ATV will not be accessible from the Remote app on iDevices on the same network.
About Remote App

Cannot send email from iPad2 with Shaw

Hi there,
I have issues that I cannot seem to resolve:
I can receive from my shaw account but it sends all outgoing to the Outbox - I've double, triple cheked all incoming and outgoing servers - I even sat with my iPad next to my iMac to make sure everything matched.
it says The sender address "myemailadrees.com" was rejected by the server. even though I recive ok.
Help please??

I too have spend countless hours trying to get my iPad 2 to work with my Shaw email. I FINALLY got it to work this morning after about 3 months of trying different "solutions". Here is how I set my POP email account:
Incoming mail server:
Host name: shawmail.ed.shawcable.net (I live in Edmonton)
User name: my shaw email address without the @shaw.ca
Password: my Shaw email password
Outgoing mail server:
Host name: shawmail.ed.shawcable.net (I live in Edmonton)
User name: leave blank
Password: leave blank
Use SSL: off
Server port: 25
This has worked so far for me, so hopefully it will work for others as well. It seems like there is an lot of people on these forums going through the same frustrations. I was able to set both mine and my wife's email accounts on my iPad.

Cannot delete email from iPad with no content

Have tried all of the suggestions to get email delete without content. have restored iPad and that still does not work, prevents me from deleting other emails also as it hangs and then jumps me out of email. WHen I move an email to trash it keeps putting these emails with content back into Inbox. extremely frustrating!

Reset of settings worked!
+1 for sharing that.
It seems an issue that has krept up in 8.1.x. I was not looking forward to having to wipe the iPad in any way.
Note: off the top of my head, my "accessibility" settings (even though I have no vision issues, just trying to compensate for apple's design direction) were reduce motion, reduce transparency, reduce white point and bold on.
Was able to delete apps after that settings reset, which took the above out, and rebooted the ipad.
Did have to re-enter wifi password, set wallpaper and the above settings. Haven't tried deleting since, but have left bold off, as it requires a restart.

Cannot synchronize passwords from DS with ISW

I have this warning S Plugin (SUBC100): cannot capture password change of 'uid=rrrr,ou=people,o=tdc', because new password is already hashed" TNK

[25/Jun/2009:12:32:31.800 +0200] WARNING 2301 CNN100 tiwspreldap1 "DS Plugin (SUBC100): cannot capture password change of 'uid=aapontec,ou=empleados,ou=personas,o=tdc', because new password is already hashed"
i make the next syncronization for the first time : from DS to AD
./idsync resync -c -o Sun -l SUL2 -w - -q -
thank you!
yenny.
Edited by: yenny on Jun 25, 2009 3:36 AM

ORA-01446: cannot select ROWID from view with DISTINCT, GROUP BY, etc.

Hi,
I have created view by joining two tables...And it is like this...
Create view Test_Data as
Select t.column1, t.column2, t.rowid from table1 t
union s.column1,s.column2, s.rowid from table2 s
with read only...
Now I executed the following stmt...
Select * from Test_Data where rowid = objid_ where I am passing the objid_ value...But it gave me the above error...can not I run this select stmt using the rowid ?
Any input is highly appreciated...
Thanks And Best Regards,
/Dinesh...
Hi All Again,
I created the view in the following way...Just to check...
CREATE VIEW my_view AS
SELECT t.col1 col1,
t.col2 col2,
t.rowid objid
FROM table1 t
WHERE rownum < 400
UNION
SELECT q.col1 col1,
q.col2 col2,
q.rowid objid
FROM table2 q
WITH read only;
Then I executed the following stmt...
Select * from my_view where rowid = objid_
Then I did not get that Oracle Error ORA-01446, Does anybody have any clue regarding this matter, i.e. how the use of rownum solve this prob...
Thanks And Best Regards,
/Dinesh...
Edited by: user521478 on Aug 9, 2010 4:46 PM

Check this:
SQL> create view my_view as select rowid rd from dual;
View created.
SQL> select * from my_view;
RD
AAAACsAABAAAAGiAAA
SQL> select * from my_view where rd = 'AAAACsAABAAAAGiAAA';
RD
AAAACsAABAAAAGiAAA
SQL> So your create view statement should be:
Create view Test_Data as
Select t.column1, t.column2, t.rowid rd from table1 t
union s.column1,s.column2, s.rowid from table2 s
with read onlyThen try:
Select * from Test_Data where rd = objid;Edited by: AP on Jul 28, 2010 2:19 AM

Old MacBook cannot purchase pics from Apple with iPhoto 7.1.5

I have an old MacBook that has OSX 10.7.5 (Lion) and cannot be upgraded to Mavericks. I also have iPhoto 7.1.5 (iLife 08) and am now unable to purchase pictures from Apple. Is there an upgrade to iPhoto that will fix this on Lion (OSX 10.7.5)?

Buy an iLife 11 DVD from a source such as Amazon or eBay.
(94636)

Have changed from I phone too samsung galaxy 4 but cannot receive texts from people with I phones can u help please

Hi can you tell me why I can not receive text messages from a I phone too my samsung galaxy s4 having had a I phone before

Agreed. Should not be an issue if they use text messages.   iMessage will NOT work to a non Apple device.
I have the GS3 and a house full of Apple products.   I really love the phone and am hoping to get the Note 3 in a few months.
Have you added 'SmoothSync for Cloud' to your accounts in the settings?   This allows mail, calendar and contacts to sync between your Apple and Galaxy.
you should also add DropBox
You might look at Swiftkey as your keyboard as it is much better than the stock keyboard.
I also paid for Enpass, which is an encrypted password storage.   It syncs back and forth with dropbox.

After 10.8.2 update i can no longer wake my macbook from standby with keyboard when the lid is closed

I just updated to 10.8.2 and now i can no longer wake my macbook froom standby when the lid is closed, it directly goes back to sleep
steps to reproduce:
1. attach secondary monitor and keyboard
2. close lid
3. wait 5 seconds for going to standby
4. press any key on keyboard and type in user-credentials (notice how the 2nd monitor becomes the mainscreen)
5. wait 5 seconds
6. standby again
side note:
i also have sudo nvram boot-args="iog=0x0" enabled, because i like to not use the integrated screen when its attached to a secondary screen, but since it goes back to standby right after login this is pretty much pointless

Same here, I think changed something in 10.8.2 that wrecked the "Open-MBP Clamshell Mode." sigh

Cannot config EM from dbca with ORA-12541: TNS:no listener

Hi all,
I am having a strange issue with Oracle Database. I have "Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production" running on a windows 7 system. Everything seems working: I can connect and do SQL operations. But my EM is not running. I need to do a re-config by running dbca. I choose to "configure database options" etc for the existing database, roughly at the 67%, it stopped. In log, I see the following exceptions:
Jul 7, 2012 11:12:49 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12541: TNS:no listener
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12541: TNS:no listener
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
However, my listener seems working (otherwise, my sqlplus connections wouldn't work, correct?). Please see the attached information. Can anyone please tell me what I am doing wrong here and how to fix it? Thank you all very much!
$ lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JUL-2012 21:54:12
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:27 refused:0
LOCAL SERVER
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
The command completed successfully
I can also connect
$ sqlplus sys/*****@orcl as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jul 7 23:11:30 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
I can also do:
$ tnsping orcl
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JUL-2012 23:12:53
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\11.2.0\dbhome_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK (40 msec)

Can you please tell me what options I need to run emca? My current database is accessible and seems running fine except this EM issue.
dbca can also "configure database options" existing DB's, at least I should not get that error in "C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log" that says
Jul 7, 2012 11:12:49 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12541: TNS:no listener
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12541: TNS:no listener
Jul 7, 2012 11:12:49 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Jul 7, 2012 11:12:49 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .

Cannot power up from standby with remote

Similar Messages

Maybe you are looking for