Cannot Press More Than 2 Arrow Keys

My computer does not register more than 2 arrow keys being pressed at the same time. Is this a defect, or is it not supposed to? Either way, it is very irritating...

I am playing StepMania, and my Ignition pads are broken. I'm sure there are other programs that also want more than 2 arrow keys pressed at once. This isn't exactly a car... It has many many possible uses.

Similar Messages

Can't press more than 2 directional arrows keys at the same time

I just noticed that in the Macbook Pro Retina that I bought recently there's no way to press more than 2 arrow keys at the same time, or at least the system does not seem to handle it.
All other keys can be pressed at the same time without any problems, so I think that the problem affects only the arrow keys.
I'm surprised that in a modern computer can exist this type of limitation
I think Apple should update the system to allow this - car gamers like me will thanks or feel less disappointed...
Any help would be appreciated!
Thanks
GM

@kalos
Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
No pulseaudio --kill command so I couldn't run.
Checked systemd journal and there is no mention of PA this time.
Checked top, and grepped ps aux and there is no PA there either.
I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
_ vlc Videos/anime/fmab/01.mp4
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7fb604001248] main vout display error: Failed to resize display
But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
@nomorewindows
I see. That's too bad. At least we're not alone.
Last edited by Greduan (2014-11-14 01:34:29)

HT6114 I cannot select more than one message at a time to delete from the trash. Any ideas will be appreciated

I cannot select more than one message at a time to delete from the trash. I did not have this problem before I updated to Maverick. What am I doing wrong?

This works in many different ways and in lots of apps.
Hold down the command key and you can select from a list (leaving some not checked) to exclude them from the delete process.
To empty all of the trash folder use command-a keys to "select all" and then the delete key to remove them.

I cannot highlight more than one e-mail. I am concerned about this when I am in the Junk mailbox. I do not want to open any e-mails that are in this mailbox.

I cannot highlight more than one e-mail. I am concerned about this when I am in the Junk mailbox. I do not want to open any e-mails that are in this mailbox.

Two thoughts:
1. You never need to open any emails in the junk mailbox. You can simply do Mailbox > Erase Junk Mail from Mail's menu.
2. What happens if you hold the shift key after highlighting the first in a series of emails, then click the second one with the shift key depressed? That should hightlight both.

Cannot add more than one reminder, add new list, to reminder app in iOS 7.1, app crashes a lot

Default iOS reminder app: Cannot add more than one reminder, cannot add new list, after updating to iOS 7.1. The app crashes frequently on editing or just by pressing return..

Hello Kyem22,
Thank you for providing the details of the issue you are experiencing with the Reminders app quitting unexpectedly.
The first thing I recommend is quitting and relaunching all the applications on your iPad:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting all the apps, I recommend restarting your iPad and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPad. The Reminders app is not something that can individually be reinstalled, but backing up your iPhone and restoring the iOS software will reinstall the application:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

Validation Rule: Department cannot have more than 5 employees

Say there is a LOV of departments. User will select one department, and employees connected with that department will be displayed in the table below.
Then there will be a button to create an employee. Once entering the data, the user will press Save button. Now there is a validation where the application will check that a department cannot have more than 5 employees.
I want to know how to create, and where to create such a validation rule, and how?

Sorry to rain on the parade here, but I don't believe that any of these solutions will work correctly, at least not if your application has more than one user.
There is one way (short of using explicit locking, which is a bad idea for a web app) that I know of to implement such a requirement - it would involve creating a refresh-on-commit materialised view in the database and placing a check constraint on the MV. The MV would simply be something like "select department_no, count(*) num_employees from employees group by department_no" and the check constraint would ensure that num_employees must be less than or equal to 5.
John

Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013

I have been trying to move mailboxes from ex2007 to ex2013with the new-migrationbatch and the new-moverequest command.
I have a DAG-cluster with two servers with all roles.
What happens is that I cannot get more than two concurrent mailbox moves. If I restart the MRS-service nothing happens. I have changed the config-file for the mailbox replication service and currently have these settings:
MaxMoveHistoryLength="5"
MaxActiveMovesPerSourceMDB="20"
MaxActiveMovesPerTargetMDB="20"
MaxActiveMovesPerSourceServer="100"
MaxActiveMovesPerTargetServer="100"
MaxTotalRequestsPerMRS="100"
What is funny is that when I start a new batch with autocomplete off, only two mailboxes goes to 95% and the rest of them is not even started.
The command I use is New-Migrationbatch -local -Name TestNew -csvdata ([System.IO.File]::ReadAllBytes("c:\temp\exchange\migration\testmigration.txt")) -targetdatabases mdb001,mdb002 -autostart
Here is the output of Get-MigrationConfig | fl
RunspaceId : d382f8a7-924a-4f0e-812e-f18970b632e2
Identity :
MaxNumberOfBatches : 100
MaxConcurrentMigrations : Unlimited
Features : MultiBatch
CanSubmitNewBatch : True
SupportsCutover : False
I have off course restarted both servers and services.

Just out of curiosity, on which server you made these changes? Mailbox or CAS? And on Target or Source Server?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Cannot run more than one instance of a remote app in remote desktop services Server 2012

All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSU

Hi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP

Since downloading the iOS on my iPad, I cannot download more than one pdf from mail to iBooks. I have to shut down y iPad and start again. Any suggestions?

Since downloading iOS on my new iPad, I cannot downlaod more than one pdf from mail into iBooks. I have to shut down my iPad and restart it to save a second pdf. Wasn't a problem with the old operating system. Any suggestions?

It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.

Cannot open more than one photo in Photoshop

Hi
I don't know if anyone can help me, but I am having an issue with Photoshop CC (2014), I cannot open more than none photo at a time, and keep getting the attached error.
It has been working fine, until i have tried it this evening.
Regards
Mick

There's something wrong with your system.
Please give detailed information.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Cannot have more than one Mobile item for a person

Hi,
I cannot have more than one mobile phone item for a person. In India some of them carry dual SIM card phones and both will be valid. In Lumia 800, I dont see an option to add two mobile items. I can do with a work around by choosing one mobile item with Windows Live Account and another with Google Account. But then that is not the right way to do it. If I need it both on same account, then I cannot do it.
This feature is available in all the Android phones. Also i am facing another issue is that Lumia 800 does not sync any mobile item #2 of Google account, so I have to go to Google and manually add that phone number to my phone, which is painful.
Hope Microsoft is listening.
But I really like the way the facebook, SMS and all other chat are sync'ed in one place.
Regards,
-Srinivasan.

The wierd thing is they have duplicates for Home/Work but not for Cell. I have the odd contact that has two cell phones. Really only two work arounds, use one of the other available types as a secondary cell number or what I do is create two contacts, one in Exchange and one on Live. Since my main account is Exchange, I put the secondary number in the Live contact, then on the phone I link the two together. This way I see two cell numbers for one contact.

ORA-01776: cannot modify more than one base table through a join view

I have created EO based on a database view than consists of two tables, and only one is updateable.
When I try to update a row using EO, I got a following message: "ORA-01776-cannot modify more than one base table through a join view"
In Forms, this issue is resolved by setting "Query Only" property of non-updateable items to "True".
Is it possible to do something like that in ADF BC?
Thanks

Thanks for answer.
When I set "updateable" property to "Never", that attribute is protected from any change.
I'm sorry for incomplete usecase.
I have set up a list of value on that attribute, because it is a lookup field for another table and I need to get an ID from that table.
Basically, I need that attribute to be updateble for BC, but not for database.
Edited by: MarioK on Oct 13, 2011 9:28 AM

Cannot modify more than one base table through a join view

hi guys, my current problem is that i have a datablock based on a view, now all the fields bar 1 are updateable, but this one field that is obtained through a join is displayed, the user can enter data in this field which then pupulates other fields which are required, but this specific field should not be updated. Is there an option to state this as i keep getting the error:
cannot modify more than one base table through a join view
Any help would be greatly appreciated, thanks.

the user can enter data in this field which then pupulates other fields So, using the value of "this field" you then query the rest of the fields? Can you show us the code you use to populate the rest of the fields?
but this specific field should not be updatedHave you tried setting the "Query Only" property of the field to "Yes" and the other DML properties (Ins, Upd, Del) to No?
Also, what is your Forms version?
Thanks,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

After i downloaded Firefox 7, I cannot open more than one page at a time. I have done everything you suggested about ad-on, etc. Other people are having problems. Can I get reall help with this or should I just reload Firefox 4?

Firefox 7 is a dud. Cannot open more than one tab at a time, will not open additional pages. Nothing you suggested has worked.
Can I take down Firefox 7 and reload Firefox 4?
I need to talk with a live person! I am real disappointed with this.

Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
Firefox 4 is not supported, but firefox 3.6 is
* see [[installing a previous version of firefox]]
There is a change to a preference which may help, post back with more details of your problems please.

Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks

Dear All,
I get the Following Error in the Essbase console when I try to Execute any CalcScript.
Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting)_+
Please find the detailed output of the Statics of my Planning Applications Database and outline.
please help guys........
GetDbStats:
-------Statistics of AWRGPLAN:Plan1 -------
Dimension Name Type Declared Size Actual Size
===================================================================
HSP_Rates SPARSE 11 11
Account DENSE 602 420
Period DENSE 19 19
Year SPARSE 31 31
Scenario SPARSE 6 6
Version SPARSE 4 4
Currency SPARSE 10 10
Entity SPARSE 28 18
Departments SPARSE 165 119
ICP SPARSE 80 74
LoB SPARSE 396 344
Locations SPARSE 57 35
View SPARSE 5 5
Number of dimensions : 13
Declared Block Size : 11438
Actual Block Size : 7980
Declared Maximum Blocks : 3.41379650304E+015
Actual Maximum Blocks : 1.87262635317E+015
Number of Non Missing Leaf Blocks : 10664
Number of Non Missing Non Leaf Blocks : 2326
Number of Total Blocks : 12990
Index Type : B+ TREE
Average Block Density : 0.01503759
Average Sparse Density : 6.936782E-010
Block Compression Ratio : 0.001449493
Average Clustering Ratio : 0.3333527
Average Fragmentation Quotient : 19.3336
Free Space Recovery is Needed : No
Estimated Bytes of Recoverable Free Space : 0
GetDbInfo:
----- Database Information -----
Name : Plan1
Application Name : AWRGPLAN
Database Type : NORMAL
Status : Loaded
Elapsed Db Time : 00:00:05:00
Users Connected : 2
Blocks Locked : 0
Dimensions : 13
Data Status : Data has been modified
since last calculation.
Data File Cache Size Setting : 0
Current Data File Cache Size : 0
Data Cache Size Setting : 3128160
Current Data Cache Size : 3128160
Index Cache Size Setting : 1048576
Current Index Cache Size : 1048576
Index Page Size Setting : 8192
Current Index Page Size : 8192
Cache Memory Locking : Disabled
Database State : Read-write
Data Compression on Disk : Yes
Data Compression Type : BitMap Compression
Retrieval Buffer Size (in K) : 10
Retrieval Sort Buffer Size (in K) : 10
Isolation Level : Uncommitted Access
Pre Image Access : No
Time Out : Never
Number of blocks modified before internal commit : 3000
Number of rows to data load before internal commit : 0
Number of disk volume definitions : 0
Currency Info
Currency Country Dimension Member : Entity
Currency Time Dimension Member : Period
Currency Category Dimension Member : Account
Currency Type Dimension Member :
Currency Partition Member :
Request Info
Request Type : Data Load
User Name : admin@Native Directory
Start Time : Mon Aug 15 18:35:51 2011
End Time : Mon Aug 15 18:35:51 2011
Request Type : Customized Calculation
User Name : 6236@Native Directory
Start Time : Tue Aug 16 09:44:10 2011
End Time : Tue Aug 16 09:44:12 2011
Request Type : Outline Update
User Name : admin@Native Directory
Start Time : Tue Aug 16 10:50:02 2011
End Time : Tue Aug 16 10:50:02 2011
ListFiles:
File Type
Valid Choices: 1) Index 2) Data 3) Index|Data
>>Currently>> 3) Index|Data
Application Name: AWRGPLAN
Database Name: Plan1
----- Index File Information -----
Index File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.ind
File Type: INDEX
File Number: 1 of 1
File Size: 8,024 KB (8,216,576 bytes)
File Opened: Y
Index File Size Total: 8,024 KB (8,216,576 bytes)
----- Data File Information -----
Data File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.pag
File Type: DATA
File Number: 1 of 1
File Size: 1,397 KB (1,430,086 bytes)
File Opened: Y
Data File Size Total: 1,397 KB (1,430,086 bytes)
File Size Grand Total: 9,421 KB (9,646,662 bytes)
GetAppInfo:
-------Application Info-------
Name : AWRGPLAN
Server Name : GITSHYPT01:1423
App type : Non-unicode mode
Application Locale : English_UnitedStates.Latin1@Binary
Status : Loaded
Elapsed App Time : 00:00:05:24
Users Connected : 2
Data Storage Type : Multidimensional Data Storage
Number of DBs : 3
List of Databases
Database (0) : Plan1
Database (1) : Plan2
Database (2) : Plan3

ESM Block Issue
Cheers..!!

Cannot Press More Than 2 Arrow Keys

Similar Messages

Maybe you are looking for