Cannot preview pictures in split view

i recently migrated my photos from my mac mini to my macbook pro. when i open apeture I can not view the pictures in slip view. or when i open the project it takes a long time for each image to load. In browser the i can not view the thumbnails either.

What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support

Similar Messages

Aperture Split View Misbehaving

The vertical photos in the split view bar have all switched from being displayed vertically/normally to being rotated and showing "squashed". They only do it with photos imported from my Sony DSV-HX5V, not iPhone or other cameras. Any ideas?

A few simple things first:
- Does the problem persist after closing and re-opening Aperture?
- Are they distorted in Grid view?
- In Split view, does changing from Filmstrip to Grid (still in Split view) correct the distortion? Does changing the size of the Previews in the Split view grid (use the slider) correct them?
- What happens when you select one Preview, and select "Update Preview" from the context-sensitive menu?

How to view rating stars on pictures in browser or split view

On an Imac aperture v3.2 I cannot see the rating stars on the pictures in browser or split view. I can only see them if i open the metadata for each individual picture. Does anyone know how to turn this feature on? My husband has a Macbook pro using the same software and he can see them.

The ratings are part of the Metadata Overlays (link goes to User Manual page with full instructions). There are seven different Metadata Overlays. It is helpful to customize each of them. The customization is done via "View→Metadata Display→Customize".
The Browser Metadata Overlay is toggle on/off with "u". "{Shift}+u" will toggle the Browser Metadata Overlay between "Basic View" and "Expanded View".
What is most likely is simply that either your Browser Metadata display has been toggled off. Try each of the toggles above, and see if that doesn't bring back the ratings. If it doesn't, you'll have to add them back to the Metadata View using the customize command above.
Message was edited by: Kirby Krieger -- link added.

HT3805 In my split view, the viewed picture is all the way to the right- only a sliver is visible. How do I get it to be centered and viewed in total?

How can I get the picture in my split view to move back to the center where I can see it all?

Lynn,
there should be. Are you perhaps looking in the system library?
The User Library should appear in the Finder's "Go" drop down menu, like this:
If your system is Lion or Mt. Lion, you will have to hold down the option-key ⌥ to make it appear in the menu.
Then look in the folder Preferences for "com.aperture.plist" and remove it.
Don't forget to quit Aperture before you do this.
Regards
Léonie

I think the last update did not work, and now I cannot open jpeg attachments with windows picture and fax viewer, it is not listed in the tools/options drop dow

I don't believe the last Thunderbird update worked, there was a very fast error message. But since then I cannot open jpeg attachments in Windows Picture and Fax Viewer. If I go to Tools, then options, the jpeg line is grayed out, and the drop down menu does not show Windows Picture and Fax Viewer. The windows picture and fax viewer still works on my computer, but not for opening attachments.

I did as you said - deleted the entry for jpeg, but when I tried to open one there is not an option for Picture and Fax Viewer in the drop down, and it can't be found by browsing. It's just not there anywhere even though I can see pics in it except in email attachments.

Pictures are not shown when saving to PDF. Cannot Preview Print Job.

Help! Pictures are not shown when saving to PDF. Cannot Preview Print Job.

I guess you need to fix it
Or if you would like some help provide some information - there are no mind reader supporting this forum and we can only work with the information you give us - right not that is "it does not work"
iPhoto has no "save to PDF" function - exactly what are you doing? and what exactly do you want to do?
LN

Cannot preview filetype please download the file for viewing and garbled text on a downloaded image

Dear Madam or Sir,
When I click on a file titled "Subject Access Request Letter re Account Number 12527629 Sort Code 60-10-34 24022015.pdf", which is stored in my Account on Acrobat.com I get the response "Cannot preview filetype please download the file for viewing". This file was created from an OpenOffice .odt document of the same title. Please advise.
I downloaded an image, which purports to be a .pdf, from the Royal Mail Track & Trace web facility using my Samsung S5. The text that I expect to see might as well be hieroglyphics for all its similarity to text. Please advise.
Regards,
Ron Platt
PS I have tried to attach both files (.pdf) but am advised "That image type is forbidden". Please advise.

Hi Laura,
I have found the solution to be:
   1. Not to upload to "Document Cloud" from the .pdf stored on my PC and
   open on screen.
   2. To login to Acrobat.com from the .pdf stored on my PC and open on
   screen, select "Document Cloud" and the sub-folder required and then upload
   the file
I have a feeling that there is a glitch somewhere, because after I have
opened a number of .pdf files stored on my PC, and irrespective of whether
I have closed them prior to opening the next .pdf file or left them open,
Acrobat Reader will display (Not responding) in the window title bar. The
"number of files" equates to less than 10. I, then, click on the X at the
right of the window title bar and I am given the option of "Close the
program" or "Wait until the program responds" (or words to that effect). If
i choose the latter, nothing happens and I am back at the unhappy status
quo. If I choose the former, I am told that Windows is searching for a
solution, which it never finds. I, then, have to shut down the PC and then
start it up, again. Clicking "Restart" does not solve the problem.
I have described the above before and received the usual "it cannot be
Acrobat, it is perfect" response. I could, I suppose, screenshot/snip every
sequential screen but why should I have to when I have described the
sequence as fully as I can. So I have found a "workaround" that does not
solve the "Not responding" problem but does solve the problem of not being
able to upload from the open .pdf file to the sub-folder in "Document
Cloud". I am, on occasion, working through the myriad of .pdf files that
are in the root folder of "Document Cloud" and putting them in the correct
sub-folder(s).
I have today read that Google is starting a cellphone service in the USA in
which a monthly "access" rental (US$20) is paid plus a GB capacity usage is
elected for at a rate specified, e.g. US$10.00/GB. If the subscriber does
not use the elected GB capacity Google refunds the US$value of the unused
elected GB capacity.
Suggestion: Adobe applies that kind of policy to its online software
package usage rates, e.g. I elect to subscribe to a particular level of
online software package usage monthly, but, if I do not use all of the
programs included in that online software usage package, I am credited back
for not having used the softwares, that I did not use, that were inclusive
in that online software package offer.
Regards,
Ron

Previews not displaying in split view in Aperture

Recently Aperture has stopped displaying previews for a number of photos (but strangely not all) when in split view. If I switch to browser view the previews are all there, and if I then return to split view they are back to being displayed. But if I move to another project and then return to the first they are gone again. I have repaired the Aperture database with no change, but not yet rebuilt it. This change in behaviour was not concurrent with an Aperture update. However there have been lots of updates affecting 10.8.2 since the most recent version of Aperture. Any thoughts?
Thanks,
Bob
Aperture 3.4.3
OS X 10.8.2
Late 2009 MacBook

Here is an image of Aperture without Viewer

Aperture stopped showing pictures in viewer and split view

Suddenly Aperture 3 has stopped showing any pictures in viewer and split view (except for the bottom fim strip) but I can see them all in browser view. I have tried using Aperture Repair and have reset Aperture (using Clean My Mac to delete the user setup files). I also tried creating a new library with just a few files to see if the size of the library was an issue. I also tried opening the libraries in iPhoto and have the same result. I can browse the minatures but not open the larger pictures.
The only thing I have yet to try is to delete and reinstall Aperture. But since iPhoto has the same problem, I don't see how that would be the issue.
Aperture is version 3.5.1, OS is OSX 10.9.2.

I would have to redo the cleanmymac step but essentially it is like creating a new install before using the app.
If you do not know, what exactly will be uninstalled, by a general cleaning application, don't use it. That is risky.
Using a different user account makes no difference.
That means, you are having a system wide problem. Fixing your Aperture library or settings in your account will probably not help.
First thing to try, reinstall Aperture.
And if that does not bring your split view back, reinstall Mavericks. You may have missing caches and necessary configuration files, since iPhoto is having the same problem.
Did you run CleanMyMac to uninstall other applications, before the problem first occured? Usually it is much safer, to use only the uninstaller, that come with an application. Otherwise, you are risking to uninstall items needed by other applications or the system.
To reinstall MacOS X 10.9.2, boot into OS X Recovery, see this document: http://support.apple.com/kb/HT4718

What happened to Split View?

I wanted to watch the Macword Keynote today to see what features Steve put out there that we don't currently have.
One is "Split View" email:
This allows us to see the email message in the current window with the email list at the top, and the mail message at the bottom.
I also wanted to put out there that I can confirm there are 2 extra tabs at the top of iTunes that they previewed, the second to last on the right vaguely makes out "ringtones".
Regardless, at the bottom there is an additional green color category that you cannot make out the text to.
Back to the question... What happened to split view on email?!?!?

It's just annoying, he really spent some time on it.
Hopefully in an update.

How do I change the thumbnail preview picture

How do I change the thumbnail preview picture? I've got a 3d model and I want a particular view to be the thumbnail picture as well as the default view. I believe I've done that before but cannot figure out how I did it.

I'm working with pages that are comprised only one picture of a 3d object (a table). I really believe I was able to change the thumbnail to a particular point of view but can't remember how I did it. It's been so long that I can't remember, but I'm pretty sure I was able to.

Cannot edit pictures in "Develop" mode

I´ve got about 133.000 pictures - all with keywords. In connection with backup of the cataloque -unfortunatly I lost the connection with my external HD - and thereafter the cataloque has corrupt in the way, that all pictures are to be find in the keyword list,. Most of the pictures can be viewed in "Library" - but I can´t edit them i "Develop". I get the message : "The folder could not be found"
Could somebody help me with restoring it back to "normal" order to have full controll over my photos again?
My Lightroom is 5.3 and my OS is Win7 proff.
The cataloque is on my C-drive and all of my pictures are on a external 2 TB HD
Thank you in advance.

What has happened is that the catalog has lost track of where the images are actually located.
You may note that in the Library module that both folders and individual images have question marks against them.
In Library module the previews that you see are just that, previews, and are stored with the catalog.
As soon as you go to the Develop module Lightroom needs to create a different preview directly from the original image.
It is telling you that it cannot find the original image.
R-clicking on a folder or image with question marks will initiate a dialog box that will allow you navigate to, and select where the folder or image is, and so, relink it inot Lightroom.
Ideally R-clicking on the folder that is highest in the folder hierarchy of your image colection should relink all the images that are below it.
Tony Jay

Aperture Split View Problem

The vertical photos in the split view bar at the bottom have all switched from being displayed normally to being rotated and showing squashed and distorted.
I have tried to close and re-open Aperture, and I have also restarted the computer. The pictures are distorted whther they are in the Grid view or Filmstrip. I also tried to "Update Preview", but it tells me that it is up to date.The horizontal/landscape pictures are showing fine, the problem is only with the vertical/portrait pictures in the Split view.

Select all the ones in one Project and run "Photos→Generate Preview". Does that work?
"Update Preview" changes to "Generate Preview" when "{Alt}" is pressed.

How do I do picture in picture or split screen?

I have a number of training programs but nowhere can I find out how to do picture in picture or split screen. Can any one help please

Thanks again for your help but one thing puzzles me. If i crop the two pictures then they reduce to half the size of the viewer screen, which seems logical to keep the perspective correct. I must be doing something wrong and I cannot see if you crop how yo can have a full screen picture that isn't distorted.
Thanks

Cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?

cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?

What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support

Cannot preview pictures in split view

Similar Messages

Maybe you are looking for