Cannot Preview Project

Recently tried to create a preloader.
I copied one of the default preloaders and substituted my own
text. Via a flash movie.
I see a very quick flash of the preloader then nothing after
that. It actually prevents the Preview window from showing.
Any ideas...

Hi again
Scratch what I wrote. What I wrote was a reply to the text
you had before you edited the post.
I'm guessing something got messed up when you edited the
preloader. Someone conversant with Flash will probably have to
suggest where that failed.
Cheers... Rick

Similar Messages

  • Getting error message "cannot prepare project for publishing (-50) -- and it wont publish my project. What's up?!

    getting error message "cannot prepare project for publishing (-50)" and, subsequently, it won't publish the bloody thing. I have publsihed many videos previous to this one so I have no idea waht is going on.
    So, my question is -- WHAT IS GOING ON?!!

    Hi
    See if this might help
    Error -50
    Error -50   paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Yours Bengt W

  • Cannot open project. Just got an error message that says:  '  project contained a sequence that coul

    Cannot open project. Just got an error message that says:  '  project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated witht his sequence type. "  how do I navigate this and reopen my project. ( note: I recently transitioned from the 30 day free trial to 'buying in' to the license cloud application; if that has relevance....)

      FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

  • Text Caption appears in Edit Mode but not in Preview Project or Web Browser

    I'm using Cp4 and have downloaded Adobe Flash 10 Active X, it's ver 10.1.82.76.  I've added a simple text caption with these options:
    Timing Display:  Rest of slide
    Appear after:  2.0 seconds
    Transition effect:  Fade in only
    In: .5 seconds
    And Visible is checked
    I also have a simple line that I drew with the draw line tool and included an arrow on the end of it.
    Everything on the screen works including the click box, the animated text and the failure caption.  For some reason the text caption and the arrow are not appearing except in Edit Mode.  In Preview Project, they disapper but the click box, failure caption and animated text work fine.
    I've rebooted, copied this screen into a new instance of Cp4, re-created these objects on a freshly recorded screen, chosen Order: Bring to Front, created a brand new screen completely from scratch and downloaded the Flash 10 Active X version mentioned above.
    They funny thing is, is that the text caption and arrow works fine on other screens in the project.  I have 76 screens total.
    I'm running Windows XP.
    Any suggestions?

    Hi there
    Can you post a screen capture of what your Timeline looks like?
    Odds are your Click Box is pausing in a weird place.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Cannot preview office attachements in Outlook 2010

    I just installed Office 2010 Home & Student and Outlook 2010.  But I cannot preview any Office files in Outlook.  It says "This file cannot be previewed because there is no previewer installed for it".  PDF attachments preview just fine.
    When I go to Trust Center settings and view "Attachment and Document Previewers...", I don't see anything specifically related to office in there.

    Hi,
    From your description , I understand that you cannot be previewed any Office files in Outlook  because there is no previewer installed for it.
    So based on your current situation,  I would like to recommend you uninstall your Office 2010 and Outlook 2010 completely use the KB article link.
    How do I uninstall Office 2003, Office 2007 or Office 2010 suites if I cannot uninstall it from Control Panel?
    http://support.microsoft.com/kb/290301
    then reinstall your Outlook 2010 separately.
    Sincerely,
    Harry 

  • I can no longer open any attachments that are sent to me. I click on and get cannot preview (but have had this for ages). I am clicking on download and nothing happens. It does not download. I clicked to install a new version after updating and clicking r

    I can no longer open any attachments that are sent to me. I click on and get cannot preview (but have had this for ages). I am clicking on download and nothing happens. It does not download. I clicked to install a new version after updating and clicking repair. But still the attachments won't open including invoices I have received today. It is all attachments not just pdfs.

    Angela Richens wrote:
    It is all attachments not just pdfs.
    Then most likely it is not caused by Adobe Reader.
    Anyway, perhaps someone has some idea, if you give us some details: operating system, browser, email client, ...

  • Cannot open project: the folder for this project cannot be found cs4

    I am using Encore CS4  and I get the error "cannot open project: the folder for this project cannot be found"
    Having searched the forums I can not find a solution for when the project folder has been deleted.
    Can someone tell me the solution to this issue.

    If you deleted the Encore directory, you cannot fix this.  You'll have to start over.
    Encore creates this folder structure:
    Root or some other Folder
    MyProject.ncor (the Encore project FILE)
    MyProject (the Encore project directory)
    Other Folders for the Encore project (e.g. Cache, Sources)
    You can get the "the folder for this project cannot be found"  in various ways.
    There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name.  You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
    Folder was renamed.  If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
    Encore project file was moved - or Encore directories were moved.  If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
    If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone.  While many of its instructions are inside the project file itself, many are not.  Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

  • I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you co

    I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you confirm this is intended to happen, or is it already in process. While awaiting for this essential development, can you please suggest any way of transferring information either way?

    spicer_the_coalman wrote:
    I cannot export projects from GB in my MacBook into GB on my iPad3
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbxtogbi
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    spicer_the_coalman wrote:
    nor can I export from IPad to my MacBook.
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbitogbx
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Cannot preview ORF files in bridge cs4

    cannot preview ORF files in bridge cs4

    From which Olympus camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras
    Compatible Adobe software is listed here
    Camera Raw-compatible Adobe applications

  • I cannot Preview a form in Adobe LiveCycle. The Preview option is gray off.

    I cannot Preview my design form in Adobe LiveCycle. The Preview option is gray off. need help

    Hi,
    Try repairing your default PDF handler.
    You can check your default PDF handler by opening Acrobat / Reader --> edit --> preferences --> General  --> Select Default PDF Handler
    You can repair the application by clicking on Help--> Repair
    Regards,
    Ratnesh

  • I cannot edit project in project server after editing it in project professional

    Hi
    i cannot edit project in project server 2013 after editing it in project professional.
    i.e I created an enterprise project in project server and then edit it with project professional. after i published it to the server and open it with project server, it shows the changes. but when i click on a cell, suddenly the task list and gantt table
    hidden!!
    it happens even if I start a project with project professional.
    I'm the admin user.
    what's the problem?
    Thanks.

    CU means cumulative updates, which are intermediate bug fix packages between SP. The latest CU for Project 2013 was release on September 12th. See reference
    here.
    Can you try to reproduce the bug with
    IE in compatibility mode?
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Cannot preview attachments in gmail

    I recently upgraded to Firefox 4. Since that time I cannot preview .doc, .xls or .pdf attachments. I can preview small .txt files. I know this is not an issue with gmail because I can get previews in Safari. Using macbook pro with OSX 10.6.7. I look forward to hearing from you.

    You're welcome.

  • Photoshop files in FCE - Cannot Open Project

    I have a series of Photoshop files (RGB with about 10 layers a piece).
    I am able to import a file into FCE HD and move the layers around as tracks - everything works great.
    I save the file, and close. When I try to re-open the file, I get the dreaded "Cannot open project file".
    I have tried this with an external drive and saving to the desktop. I have also tried importing normal pictures - no problem. It's when I import layers. I have been able to isolate the problem to layered Photoshop files.
    Any ideas?
    thanks.

    Any PS file that has transparency that is imported
    into a PAL project will corrupt the file, so
    that you cannot open it again. Sorry.
    See this (9th post down) which showed that any file created in Photoshop with its type as ".psd", whether with or without transparency, will give this fault. However, a file created in Photoshop with .tif will be safe even if it has transparency.
    G5/2.0 GHz   Mac OS X (10.3.9)   1 GB RAM, 150 GB HD, Sony DCR-HC96 mini DV, FCE HD 3.0 DVD SP 3

  • Pictures are not shown when saving to PDF.  Cannot Preview Print Job.

    Help! Pictures are not shown when saving to PDF.  Cannot Preview Print Job.

    I guess you need to fix it
    Or if you would like some help provide some information - there are no mind reader supporting this forum and we can only work with the information you give us - right not that is "it does not work"
    iPhoto has no "save to PDF" function - exactly what are you doing? and what exactly do you want to do?
    LN

  • Cannot preview filetype please download the file for viewing and garbled text on a downloaded image

    Dear Madam or Sir,
    When I click on a file titled "Subject Access Request Letter re Account Number 12527629 Sort Code 60-10-34 24022015.pdf", which is stored in my Account on Acrobat.com I get the response "Cannot preview filetype please download the file for viewing". This file was created from an OpenOffice .odt document of the same title. Please advise.
    I downloaded an image, which purports to be a .pdf, from the Royal Mail Track & Trace web facility using my Samsung S5. The text that I expect to see might as well be hieroglyphics for all its similarity to text. Please advise.
    Regards,
    Ron Platt
    PS I have tried to attach both files (.pdf) but am advised "That image type is forbidden". Please advise.

    Hi Laura,
    I have found the solution to be:
       1. Not to upload to "Document Cloud" from the .pdf stored on my PC and
       open on screen.
       2. To login to Acrobat.com from the .pdf stored on my PC and open on
       screen, select "Document Cloud" and the sub-folder required and then upload
       the file
    I have a feeling that there is a glitch somewhere, because after I have
    opened a number of .pdf files stored on my PC, and irrespective of whether
    I have closed them prior to opening the next .pdf file or left them open,
    Acrobat Reader will display (Not responding) in the window title bar. The
    "number of files" equates to less than 10. I, then, click on the X at the
    right of the window title bar and I am given the option of "Close the
    program" or "Wait until the program responds" (or words to that effect). If
    i choose the latter, nothing happens and I am back at the unhappy status
    quo. If I choose the former, I am told that Windows is searching for a
    solution, which it never finds. I, then, have to shut down the PC and then
    start it up, again. Clicking "Restart" does not solve the problem.
    I have described the above before and received the usual "it cannot be
    Acrobat, it is perfect" response. I could, I suppose, screenshot/snip every
    sequential screen but why should I have to when I have described the
    sequence as fully as I can. So I have found a "workaround" that does not
    solve the "Not responding" problem but does solve the problem of not being
    able to upload from the open .pdf file to the sub-folder in "Document
    Cloud". I am, on occasion, working through the myriad of .pdf files that
    are in the root folder of "Document Cloud" and putting them in the correct
    sub-folder(s).
    I have today read that Google is starting a cellphone service in the USA in
    which a monthly "access" rental (US$20) is paid plus a GB capacity usage is
    elected for at a rate specified, e.g. US$10.00/GB. If the subscriber  does
    not use the elected GB capacity Google refunds the US$value of the unused
    elected GB capacity.
    Suggestion: Adobe applies that kind of policy to its online software
    package usage rates, e.g. I elect to subscribe to a particular level of
    online software package usage monthly, but, if I do not use all of the
    programs included in that online software usage package, I am credited back
    for not having used the softwares, that I did not use, that were inclusive
    in that online software package offer.
    Regards,
    Ron

Maybe you are looking for