Cannot print 1st page from tray 2 and rest of document from tray 4
I have letterhead paper in tray 2. If I went to printer features and select letterhead paper The print will pull from tray 2. If in paper feed options I select the first page to be pulled from tray 2 it will not and pulls from tray 4. I've deleted the printer and re-added the printer and that did not resolve the issue. HELP!!
First suggestion is to update to 5.0.2. Does this occur with the PCL
driver? Clone postscript drivers on HP printers have been known to be
troublesome.
Bob
Similar Messages
-
I cannot print certain web pages while in Firefox. It is not a printer problem as I checked by printing the pages in IE and they print fine.
== URL of affected sites ==
http://I have reset the selected printer in my Firefox preferences as described in the link that was sent from the-edmeister.
I am still having problems printing. All I see in the print preview is the address link on top of the page and that is all that prints.
I have tried using the print-selection also with no luck.
My printer works with any other application such as Word or Excel.
This all started after I updated Firefox to Ver. 3.6.3
Any other suggestions would be appreciated. Thanks -
I cannot print any page from firefox 3.6.17, using Mac OS
All of a sudden I cannot print pages from Firefox. I cannot even print e-mails. I am on Mac OS 10.5.8 using Firefox 3.6.17. All I get is blank pages. I can, however, print from Safari.
I did as benshaine posted in his thread here: https://support.mozilla.com/en-US/questions/789780 I installed Firefox 3.5.10 to my desktop, printed from 3.5.10 and then went back into 3.6.x and I could print.
-
Officejet Pro8500 A910g cannot print test page from EWS
I got this officejet 1 week ago and it has been labour to install ..each time I turn on the pc and tried the Officejet there was a problem ( scanning could not be done because of no connection , printer was not found..etc) I actually uninstall and reinstall the software and driver 6 times ...so far it seems to be ok but when I use the IP address of the printer and want to try to print a test page i always get an error " an error has occured click go back"..it happen each time I tried to print a test page ..everything is working well ..I can print from the pc but not from that page ..any ideas ? thanks
PC=> window 7 (64 bits)- connected through wired router
Officejet connected wireless ( same router )I have managed to solve this by changing page settings. These were oddly reset when the printer was installed.
-
Cannot print Duplex pages from CS3, Need to Upgrade ID?
I have been working with CS3 InDesign which meets my needs fine, until now, maybe...
I just purchased one of the new "all-in-one" Epson 635 Workforce Printers and was not able to bring up 'Duplex Printing' for two-sided printing, in the print dialog box where is should show up under output options. I'm using a newer MacBook Pro with Snow Leopard 10.6.7. I've also gone to the Epson site and updated the printer drivers for Snow Leopard.
In working with Epson technical support, we were able to get Word to print a duplex document from my computer, but when I go to InDesign, the print dialog does not contain the option for duplex printing.
Are there any solutions to this or is my only option to go for the expensive upgrade to CS5?
Thank You,
KenI'm not sure everyone reading this thread caught the subtlety: the spool time when you print from ID is in the foreground where you cannot work, whereas if you export to PDF that can happen in the background (for most of us), so it doesn't prevent work in ID.
Your PPD file does not demonstrate the "Xerox problem" I was referring to -- indeed, as you note it has:
*DefaultResolution: 600dpi
*ScreenFreq: "200"
So I draw a blank. My best guess is your problem is something else, or that InDesign isn't finding your PPD file. Since PPD files aren't [usually] the norm under Windows, well, I dunno.
As for the linescreen question, see the PPD Spec but yeah:
*ScreenAngle: “real”
*ScreenFreq: “real”
*DefaultScreenProc: spotOption
These keywords provide the default halftone screen angle, frequency, and
spot function, respectively. On Level 1 devices, these values are the angle,
frequency, and proc arguments returned by the currentscreen operator after powering
on the device. On Level 2 devices, only a type 1 halftone dictionary can
be easily represented by these keywords. Therefore, if the value of
*DefaultHalftoneType is 1, or if *DefaultHalftoneType is not present, these values are
the Frequency, Angle, and SpotFunction entries in the default Halftone dictionary.
If the value of *DefaultHalftoneType is anything other than 1, the values of
*ScreenAngle, *ScreenFreq, and *DefaultScreenProc may be meaningless and application
authors may not want to rely on them for anything important.
Note
To builders of PPD files: Although these are not required keywords,
*ScreenFreq, *ScreenAngle, and *DefaultScreenProc should be present even for
contone-only devices, because many applications have come to depend on
their presence, even though their values may be useless on a particular
device. You should assume that some applications will execute setscreen with
the values provided by *ScreenFreq, *ScreenAngle, and *DefaultScreenProc. To prepare
for this, if the value of *DefaultHalftoneType is anything other than 1, you
should put reasonable values for angle, frequency, and spotOption in the keywords
above. If you don’t know what values to use, try 45 for angle, 60 for
frequency, and Dot for spotOption, and make sure that *ScreenProc Dot is defined in
the PPD file.
I don't know if its completely ludicrous though. 1200dpi/220lpi is something I think of as normal, as is 300dpi/60lpi, your printer is 600dpi so 200dpi seems high but no more than 2x as high as what might be reasonable... "It's only off by a factor of two, the engineer said." -
Cannot print multiple pages from any website - I can in IE. Any fix?
In Firefox, when I try to print a long (more than 1 page) article, I only get the first page. I do not have this problem when using Internet Explorer. Is there some setting I should adjust? Would appreciate help - I prefer Firefox.
Contact Apple support to deactivate iMessage. https://www.apple.com/support/appleid/contact/
-
Can I print web pages from Firefox 3.6.12 using adobe pro 9 (not using PDF Download) and if so how.
{Ctrl + P} - do you have a PDF Printer listed in the Printer - Name drop-down?
-
How do I print 2 pages from a pdf file and enlarge it
how do i print 2 pages from a file and enlarge it to email
Hi stevebulldog,
Do I understand correctly that you'd like to extract two pages from a PDF, and then send them via email?
To extract pages from a PDF, you need to use Acrobat. If you don't have Acrobat, you can try it for free for 30 days. Please see http://www.adobe.com/products/acrobat.html.
I'm not sure what you mean by "enlarge" it. When your recipient views the PDF, they can enlarge the view (zoom in on the PDF) by choosing options from the View menu in Acrobat or Reader.
Best,
Sara -
I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope you will find a solution for the same.Help with using Adobe Muse CC
Thanks,
I have tried with a new site it's working perfectly.
See the screenshot of the error.
Thanks for your support Rohit -
Every time that I try to print a page from the internet, My Mac (Maverick 10.9.4) crashes and I see a "Crash Reporter" icon. Any suggestions?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I cannot print in color from my MacBook Pro
I cannot print in color from my MacBook Pro to my hpdeskjet 6122
hi FalconMom,
EWS stands for Embedded Web Server. You will be able to access the printer EWS if it is connected to the same network as your PC or notebook. Here are the instructions to connect to EWS.
Open the embedded Web server
You can access the embedded Web server via either the network or Wi-Fi Direct.
To open the embedded Web server via network
NOTE: The printer must be on a network and must have an IP address. The IP address for the
printer can be found by pressing the Wireless icon or by printing a network configuration page.
In a supported Web browser on your computer, type the IP address or hostname that has been assigned to the printer. For example, if the IP address is 192.168.0.12, type the following address into a Web browser:
http://192.168.0.12.
To open the embedded Web server using Wi-Fi Direct
From the Home screen, touch (Wireless) and then touch (Settings).
If the display shows that Wi-Fi Direct is Off, touch Wi-Fi Direct and then switch it on.
From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name,
for example: DIRECT-**- HP Officejet-5740 (where ** are the unique characters to identify your
printer). Enter the Wi-Fi Direct password when prompted.
In a supported Web browser on your computer, type the following address: http://192.168.223.1.
I am an HP employee, but I am speaking for myself. -
Cannot move the pages from one document to another
Hi,
I cannot move the pages from one document to another, abobe gets crashed. I am not sure but I think this was happening when I try to copy or move the threaded content. How to resolve this, this is happening in both CS4 and CS5. Can anyone help me?Thanks for ur reply.
1. Open two documents, for ex doc1 and doc2, doc1 contais 4 pages, doc2 contains 2 pages
2. Using Move Pages from the Pages panel menu in doc1, moving 1st two pages to doc2
Move Pages : 1-2
Destination : After page 1
Move to : doc2
Actually I was not able to copy the textframe which is linked with another, immediately it crashes. -
Cannot print double-sided from Adobe Acrobat Professional 8.1.2
Cannot print double-sided from Adobe Acrobat Professional 8.1.2
Problem limited to Adobe Acrobat, MS Office 2008, Pages, Keynote.
Can print double-sided from Safari and Mac Mail
Using HP Color LaserJet 2605dtn. Have downloaded most recent driver from HP
Computer: Apple MacPro Tower, 6GB 800 MHz DDR2 FB-DIMM, Quad-Core Intel Xeon, Processor speed = 3.2 GHzCorrect way to install new driver is go to Printer Utility and delete That printer from the list.
Then install the new driver.
Then go back to Printer Utility and add the new driver Back
Then go to systems preferences and to Print Fax (or Printer if no longer setup for fax) and set up for the the printer and set as default.
This way you shouldn't have to go into either print menu or Page setup menu and set for desired printer.
most hp printer in the pint menu you click copies and pages and mouse down to two sided pages you choose either book (facing pages) or Tablet (printed as you would a Tablet that's bound at the top.
you need to test a two page document to see which does correctly for you. Its best never to have the application set for two sided. in fact if you have set for two sided in both one counter acts the the other.
So set it only in the printer menu and no where else.
Also once you set up you can save printer profiles that you can go back to click on the Presets button mouse down to very bottom save with a anme you can remember even put the words two-sided in title then save. Then you can go to that preset and print your heart out. -
I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader with Mavericks!
I cannot print a PDF from Adobe Acrobat Pro or Adobe Reader. I tried on both MacBook Pros we have here, both now with Mavericks. Error message says "Opening printer connection failed. Unable to open printer connection . . . " This is after it says sending data, printing, shows the percentages etc., but then at the end I get the error message above. I can print a PDF (same one) from Preview, but not from Acrobat! What's going on? Never had this issue before Mavericks . . . Please help.
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Message- Print No pages from the document were selected to be printed
I have had this application for some time, simply never used it. Last night I tried converting a PDF file to word, unsuccessfully, I might add.
Today, whilst printing a page, my printing settings appear to have been reset because when I selected Print selected page, the following message appeared:
Print
No pages from the document were selected to be printed message
How do I reconfigure my settings to preview rather than defaulting to PDF? Kindly advise. Cheers.I have only been able to print by exporting from iphoto. I have a new HP printer and there is software that supports photo printing ("HP photo smart") and I have been able to do it this way. On some occasions I have been able to use the iphoto>print>then preview before actually printing. There is a print option on the preview pane and that has worked on occasion...unsure why it doesn't work always. Please pass on any other hints, or let me know if this works for you!!
G4 Power book 867Mhz Mac OS X (10.3.9)
Maybe you are looking for
-
Hi Gurus, How to view the list of Open "PURCHASE ORDERS"(which are not moved for billing)? Is there any Standard Transaction code for this?
-
BAPI Create delivery from scheduling agreement
Hello, Does anyone have code to create a delivery referencing a scheduling agreement? Thanks, Evan
-
There has to be a way to find the current directory in JSP, right?
I've read a number of posts, with limited results. Here's my problem. I have 3 databases set up, and I'd like to use a different one depending on which directory I am in. (ie Stage, Production, Dev). So I am reading the database name from a parameter
-
Hi Experts, Can we create Landed cost transactions with more than one foreign currency? Example: Local & System currency is in Peso Insurance- Euro Freight- US Dollars Other LC is in Peso If not, do we have a work around for this requirement? Many th
-
Get the flash player 9,8,7,6,5 and 4.
Can any body suggest us from where we can download all flash player 9,8,7,6,5,4?