Cannot print a webpage even after doing print.print.printer reset.

I'm using version 7.01 and am unable to print any webpage. I went to Help section today and read instructions to reset print.print.printer in Preferences; I did it, and my HP Officejet 4500 appeared on that page, and I figured it was solved. It isn't. I still can print no webpages.

Hm. Hate to admit it, but after reading more comments on problems with Firefox 8 regarding printing webpages than I'd ever seen re earlier versions, somehow I'm hesitant to try this solution.

Similar Messages

HT3500 I have a new epson wireless printer but can not get my Mac laptop to print to it even after doing the installations. What do I need to do

I have a new epson wireless printer but cnannot get my Mac laptop to print to it. Any suggestions

Can you find your printer in Print & Fax?

Icloud backup - my ipad is hung with the dialogue box saying "this iPad hasn't been backed up in 4 weeks. Backup happen when this iPad is plugged in locked and connected to WiFi". Even after doing what is said, I am not able to do anything with the iPad -

My ipad is hung with the dialogue box saying "this iPad hasn't been backed up in 4 weeks. Backup happen when this iPad is plugged in, locked and connected to WiFi". Even after doing that, I am not able to do anything with the iPad - neither able to reboot nor able to get to the homescreen. The dialogue box doesn't go at all even after pressing OK a hundred times. I treid tacking the back up through itunes and through 3G conncetion but of no avail. Please help

I too have been having this issue since about 12/14. That is around the same time I got the Ipad for my kids. I am unsure if it is related. I have tried logging out of icloud/deleting it and trying again. Removing most of the apps to sync. I reset my router. All of the attempts have produced zero results. I will be anxiously watching this thread for some help. Good luck to you also

Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring

Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring I have an iphone5 64 syncing about 8000 songs, so updating all is a time consuming, and now maddening process. Never had a problem before iOS 8. Someone (hello Apple) needs to develop a utility to help manage artwork recovery.

See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190

My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

DFU mode an try to restore to iOS6.1.4 it will wipe out the whole device if it works but than youll kno if its a software issue if it works or ahardware issue if it dont work

TS1286 My screen had a black out and since then, my ipod touch is not getting started. it just shows ' connect ipod to itunes'. Even after doing that, my Itouch doesn't appear anywhere in Itunes. Help !! ??

My screen had a black out and since then, my ipod touch is not getting started. it just shows ' connect ipod to itunes'. Even after doing that, my Itouch doesn't appear anywhere in Itunes. Help !! ??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I forgot my passcode and even after doing restore through itunes it still says its disabled. Help

i forgot my passcode and even after doing a restore in itunes phone still says disabled Help

You need to restore via recovery mode as shown in the article below:
http://support.apple.com/kb/HT1808

We have 2 mac books but i tv only recognizes one of them even after doing a reset

we have 2 mac books but i tv only recognizes one of them even after doing a reset

Welcome to the Apple Community.
Are you using the same homesharing ID for both computers, are they on the same network.

Kernel panic keeps happening even after I did the factory reset. any suggestions ?

kernel panic keeps happening even after I did the factory reset. any suggestions ?

Hi Hallry,
Let's free your device! It's important to have a properly working device. Have you attempted an alternate Hard Reset on the device http://vz.to/19r2DOO? If the alternate Hard Reset does not work, then the device would need to be replaced. How long have you had this device? Any liquid or physical damage to the device? Keep me posted
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

HP Office Jet Pro 8500 A910 Series stoped printing in black even after replacing the cartridge

Printers all in one

Hi @Curved , and welcome to the HP Forums!
I see you're having issues with your ink output. I'd like to help!
I would recommend removing the cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps laid out in this document:
Fixing Print Quality Problems for the HP Officejet Pro 8500A e-All-in-One Printer Series
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Photosmart C4780 - Prints extra page even after HP driver update installed

With Mavericks (OS X 10.9.4) installed, I have noticed that completed print jobs remain in the print queue for my HP Photosmart C4780 when printing from Safari and Preview. If I want to print another (different page), I usually have to delete the previous (100% complete) job from the queue so that the printer will print (I seem to recall that sometimes, with a Google Chrome browser, this is not necessary). If I close my MacBook Pro's lid (which puts it to sleep) with a completed print job remaining in the HP queue, it will then print again for a second time.
Today, I installed the driver update below, but the problem did not go away when I tried to print from Safari and Preview.
Critical HP Print Driver Update to address printing of an extraneous page - 2014-01-31 , Version1.0.0, 10.56M
Any ideas of how to solve my problem?
This question was solved.
View Solution.

Sure - restart your router, your printer and your Mac. It should print faster (especially with a router restart).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printer uses ink even if I do not print

My printer HP Officejet 6700 Premium uses ink even if I do not print.
I use original cartridges.
How can I solve this problem?
Thanks in advance for your help.

The printer will use some ink to keep the nozzles in the printhead from clogging. One thing to do to minimize the ink required for servicing the printhead is to keep the printer plugged into a live outlet at all times. If an external switch (such as an outlet switch) is used to turn off the printer then more ink will be used at startup as the printer cannot keep track of the time since its last use.
Also, do not run cleaning cycles from the toolbox or printer front panel unless necessary (which is very rare).
The document here has information on how ink is used. In the terminology of that document your printer is an IIC (Individual Ink Cartrdige) printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

ITunes cannot properly detect iPod even after uninstall and re-install

Recently I tried to sync my iPod nano (NOT touch) to my windows computer, but even after i completely uninstalled and reinstalled it says that it cannot properly detect it. I am running the most recent version of iTunes on Windows Technical Preview.

Did you uninstall iTunes and all other Apple related software using the instructions in this Apple support document?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
B-rock

Cannot connect to TC, even after factory reset

I bought a 1TB TC from apple in 08/2008. I don't recall if it was a refurb or not. It worked fine for 4.5 years with more or less no problems. About a month or two ago the Wi-Fi stopped working. I could connect to the SSID, but occasionally could not get an internet connection without cycling the power of the modem and TC. Finally, the cycling trick stopped working, and while I could connect to the TC I couldn't get internet. I switched to the WiFi capabilties that my Comcast modem had (as I didn't have time to address the issue then). I've finally gotten around to trying to fix it and could not find the TC via WiFi. I attempted a hard reset, but holding the reset button (while under power) did not make the yellow light flash, even after 30 seconds. I then performed a factory reset by holding the reset button while plugging in the TC. The light flashed, indicating the factory reset occurred.
After the factory reset I still cannot:
-Find the TC via WiFi
 I attempted using both my previous SSID and searching for the default "Apple Network XXXXXX" signal. No dice.
-Find the TC via Ethernet
 I attempted to connect my MBP directly to the ethernet port (<--->) on the TC but the red light remains on the Ethernet in Network Settings (Status: Cable Unplugged. Either the cable for Ethernet is not plugged in or the device at the other end is not responding). I verified the cable works by connecting the ethernet cable to the cable modem and instantly getting the green "connected" light and an internet connection.
-Find the TC via Airport Utility
 The TC did not appear, even when plugged in directly with the ethernet cable.
I'm not sure if this is a firmware issue or what. The lights turn on the front and in the LEDs above the ethernet jacks in the back during power/start up but is otherwise unresponsive. I cannot attempt a firmware update as I cannot connect to the TC by WiFi/Ethernet, let alone through the Airport utilitiy.
I'm not sure if this is relevant or helpful but the TC is also making a ticking/hissing slightly faster than once a second as if the drive is being accessed.
Can anyone help!?! I have quite a drive to an apple store and I'm sure what they would charge to mail in and fix it would be excessive.
Many karma points await anyone that can help!!! Thanks in advance for your time!

The power supply is dead.
Solid amber could also be a dead hard disk.
Apple will not fix it and do not supply parts for anyone else to fix them.
It is really no longer economic to repair unless you can DIY. And even then if the hard disk is gone then it really is a waste.. just buy a replacement.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
I have given several methods.. some rough but very cheap to repair the TC.
Otherwise it is just time to buy a new one.. or IMHO a Gen4 is an excellent buy.. second hand or from your local apple refurbish store.

Cannot rid of MFERRORmessage1032 even after submitting password?

cannot get rid of mf error message on ipad mini even after submitting password

See also [[/questions/785267]]
Try to reset the prefs on the about:config page that refer to inbox.
*Open the about:config page via the location bar and do a search for inbox via the Search bar at the top of the about:config page. 
*Reset all inbox related prefs that appear bold (user set) via the right-click context menu to their default values.
Try to reset some preferences to the default with the SearchReset extension:
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

Cannot print a webpage even after doing print.print.printer reset.

Similar Messages

Maybe you are looking for