Cannot print entire page wireless HP 3050 611

I am having issues getting my HP 3050A 611 wireless printer to print an entire page from my I pad and my computer. Any suggestions?

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

HP Photosmart C6380 won't print entire page

My HP Photosmart C6380 won't print entire pages. Some lines near to the end of the page aren't printed. Once in a while it prints the entire page.
This question was solved.
View Solution.

I think the problem has been solved. Thanks!

Cannot Print "current page" or "page range" in Compatibilty Mode in Word 2010

We are upgrading to Word 2010 from Word XP
All old documents open in Compatibility Mode
None can print a page range or current page, the whole document prints instead
I have tried to "Convert" to the 2010 format to no avail.
This does not happen on Documents created in 2010.
The only workaround I have found is to Copy the entire document into a New Word 2010 Document.
Is there a fix for this? Is anyone else having the same problem? It is not the same as the section problem I have seen all over these forums.
Thanks
Stuart Willis
[email protected]

Hi,
I am writing to see how everything is going with this issue. Have you tried to update the printer driver? Is the problem resolved?
For more research, this article may help us to continue to troubleshoot the issue
http://support.microsoft.com/kb/918790
Feel free to post back. Thanks.
Tony Chen
TechNet Community Support

Cannot Print full page 81/2 x 11

Hi:
I set up a 16 slide keynote presentation and everything is fine.
I wanted to print it out and in printing it :
The Pages are printing in a 4" x 5 1/2" (inches) size on a 81/2 x 11 page horizontally and
5" x 7" on a 81/2 x 11 Page vertically.
I have the slide size at 793 x 595.
I have looked in the printing menu options and I cannot see or make any changes that change the actual printing size.
I have not had any printing issues with other applications when needed to change a size. IE: iPhoto 81/2 x 11 to 4 x 6.
Any advice or website would be appreciated.
Thanks.
Greg

I actually figured it out.
You have to have it on individual slides to print full page.
Seems somewhat incorrect but it worked thats all that counts.
Greg

Air print not printing entire page

When I air print it does not print the entire page, no way to change orientation, how is this done, I can not find any menu to control printer options. Please help

Use free AiO Remote app to control image size and orientation if you are using HP (tap to enlarge image)

Cannot see entire page without using the bottom scroll bar.

Cannot see the entire page without using the bottom scroll bar. Unfortunately some websites do not have the scroll bar and I am unable to complete my transaction because the area I need to click is on the right of the screen and that does not show on my page. If I change the view, the font is to small and it is blurry making in illegible.

Weird. Be sure zoom is to default value (press Ctrl+0 -zero- in FF). In addition, restart FF in safe mode, maybe an add-on is the culprit.

Cannot print web page

I cannot print from a web page or now from an email. I can print all Office documents however. I have done every Microsoft fix, every fix I can find on the internet and none of them correct this problem. Bottom line is all websites that say if the issue isn't solved with the fixes it is the printer. Something is screwy because I can log onto my network as another user and it prints fine. Any advice? This started in October 2011.

Hey , Thanks for posting in the HP Support Forum. I see that you're getting the PDF save prompt when trying to print from the Chrome browser via Android with the HP Officejet Pro 8600 e-All-in-One Printer. I would like to help. It sounds like you're printing via the built-in Android print solution. Have you tried using the Google Cloud Print app? This article from Google explains the setup. Once you've got it hooked up you should be able to print straight from the Chrome browser as desired. Let me know if this approach works. In the meantime, I'll try printing with the same setup you're using to see if I encounter the same PDF prompt. The workaround on PC is 'Ctrl + shift + p' to open the print dialogue, but I'm not aware of a similar workaround for Android. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Have a great day,

I cannot print certain pages from websites while in Firefox. I have checked my printer by printing the pages in IE and they work. Please help

I cannot print certain web pages while in Firefox. It is not a printer problem as I checked by printing the pages in IE and they print fine.
== URL of affected sites ==
http://

I have reset the selected printer in my Firefox preferences as described in the link that was sent from the-edmeister.
I am still having problems printing. All I see in the print preview is the address link on top of the page and that is all that prints.
I have tried using the print-selection also with no luck.
My printer works with any other application such as Word or Excel.
This all started after I updated Firefox to Ver. 3.6.3
Any other suggestions would be appreciated. Thanks

I cannot print any page from firefox 3.6.17, using Mac OS

All of a sudden I cannot print pages from Firefox. I cannot even print e-mails. I am on Mac OS 10.5.8 using Firefox 3.6.17. All I get is blank pages. I can, however, print from Safari.

I did as benshaine posted in his thread here: https://support.mozilla.com/en-US/questions/789780 I installed Firefox 3.5.10 to my desktop, printed from 3.5.10 and then went back into 3.6.x and I could print.

Cannot print multiple pages

I am unable print multiple pages after I upgraded Acrobat 8 Professional. Worked fine with Acrobat 7. I receive a pictwpstops stopped with status 1 message.
G4 iMac
1.5 GByte Ram
Tiger with latest updates
Adobe CS2 with latest updates and Acrobat 8
Brother MFC-5840CN printer with MFC-5840CN CUPS v1.1 PDD / driver (latest available)
I have removed my local fonts, reset printers, reinstalled printer/PDD files, repaired disk permissions to no avail.
Why is this happening and how do I resolve this? This is our proofing printer.
My CUPS debug output is given below.
*** Job 1 ***
D [04/Feb/2007:08:28:57 -0500] [Job 6] Error: /undefined in YDVGLJ+Times.New.Roman.Bold050*1
D [04/Feb/2007:08:28:57 -0500] [Job 6] Operand stack:
D [04/Feb/2007:08:28:57 -0500] [Job 6]
D [04/Feb/2007:08:28:57 -0500] [Job 6] Execution stack:
D [04/Feb/2007:08:28:57 -0500] [Job 6] %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval--
D [04/Feb/2007:08:28:57 -0500] [Job 6] Dictionary stack:
D [04/Feb/2007:08:28:57 -0500] [Job 6] --dict:1059/1123(ro)(G)-- --dict:1/20(G)-- --dict:83/200(L)-- --dict:120/174(L)-- --dict:54/73(L)-- --dict:212/315(L)-- --dict:72/107(L)-- --dict:0/10(G)-- --dict:0/10(L)-- --dict:2/50(G)-- --dict:56/71(L)--
D [04/Feb/2007:08:28:57 -0500] [Job 6] Current allocation mode is local
D [04/Feb/2007:08:28:57 -0500] [Job 6] Last OS error: 2
D [04/Feb/2007:08:28:57 -0500] [Job 6] ESP Ghostscript 7.05.5: Unrecoverable error, exit code 1
E [04/Feb/2007:08:28:58 -0500] PID 1268 stopped with status 1!
E [04/Feb/2007:08:28:58 -0500] PID 1267 stopped with status 1!
E [04/Feb/2007:08:28:58 -0500] [Job 6] error drawing page 2
E [04/Feb/2007:08:28:58 -0500] [Job 6] pictwpstops - got an error disposing of document = -9783
D [04/Feb/2007:08:28:58 -0500] [Job 6] ERROR during execution of pictwpstops. Error number -9783
*** Job 2 ***
D [04/Feb/2007:00:06:09 -0500] [Job 5] cups->header.Duplex = 0
D [04/Feb/2007:00:06:09 -0500] [Job 5] cups->page = 2
D [04/Feb/2007:00:06:09 -0500] [Job 5] cups->ppd = 0x1103b80
D [04/Feb/2007:00:06:09 -0500] [Job 5] cups->ppd->flip_duplex = 0
D [04/Feb/2007:00:06:09 -0500] [Job 5] width = 4950, height = 6450
D [04/Feb/2007:00:06:09 -0500] [Job 5] PageSize = [ 612 792 ], HWResolution = [ 600 600 ]
D [04/Feb/2007:00:06:09 -0500] [Job 5] HWMargins = [ 9.000 9.000 9.000 9.000 ]
D [04/Feb/2007:00:06:09 -0500] [Job 5] matrix = [ 8.333 0.000 0.000 -8.333 -75.000 6525.000 ]
D [04/Feb/2007:00:06:09 -0500] [Job 5] Contrast_Bright() pdev->dm.dmPrivate.epBrightness = 0
D [04/Feb/2007:00:06:09 -0500] [Job 5] Contrast_Bright() pdev->dm.dmPrivate.epContrast = 0
D [04/Feb/2007:00:06:09 -0500] [Job 5] Error: /undefined in YDVGLE+Helvetica-Bold
D [04/Feb/2007:00:06:09 -0500] [Job 5] Operand stack:
D [04/Feb/2007:00:06:09 -0500] [Job 5] false
D [04/Feb/2007:00:06:09 -0500] [Job 5] Execution stack:
D [04/Feb/2007:00:06:09 -0500] [Job 5] %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval--
D [04/Feb/2007:00:06:09 -0500] [Job 5] Dictionary stack:
D [04/Feb/2007:00:06:09 -0500] [Job 5] --dict:1059/1123(ro)(G)-- --dict:1/20(G)-- --dict:83/200(L)-- --dict:120/174(L)-- --dict:54/73(L)-- --dict:212/315(L)-- --dict:72/107(L)-- --dict:0/10(G)-- --dict:0/10(L)-- --dict:2/50(G)-- --dict:56/71(L)-- --dict:1059/1123(ro)(G)--
D [04/Feb/20

> a PDF/X-1a setting has fixed the problem
I still have the problem with more simple kinds of PDF: 150 dpi, no PDFX. I can not print multiple pages.
Furthermore I can not use the option
"print screen view" (in german language), both affects the
Reader 8 AND the Acrobat 8: it always only prints the first page of the document without any scaling.
Finally I can not use the printer
"Adobe PDF": it results in an endless spool action to that printer.
Yesterday Acrobat 8 was deinstalled with the
deinstaller. The
new installation failed first because of a missing CD. The "AdobeExtendScriptToolkit2.0.1All.dmg" could fix the installation problem.
After successfull re-installation neither before nor after the update to Acrobat 8.1.0 the printing errors mentioned above were solved.
What can we try next?
===
OSX 10.4.10., MacPro1.1, Dual-Core, Intel-Xeon
Creative Suite CS2 and CS3
===
Weird hint: None of our three older G4 (10.4.10, CS3+4, Acrobat 8.1.0) has this printing or any other Acrobat problem. - So, is it even hardware related??

Reader 8.1.2 still cannot print landscape pages

Hi,
AR 8.1.2 still doesn't print landscape pages correctly - the pages are printed as portrait exactly like in topic for AR8.1.1:
http://www.adobeforums.com/webx/.3c0604d8/3
I'm using Suse Linux Destkop, with cups version cups-1.1.23-40.35.
The printouts are correct using another pdf software (or printed via command line).

Hello Stefan,
I believe you are trying to print a PDF with pages in landscape orientation by choosing the "Landscape" radio in the print dialog. Is that correct?
Could you check if the printer you are printing to supports Custom media size? (You could do that by looking at the printer options at http://localhost:631). You would not face the problem you mention if you try configuring your printer with a different driver (say which supports custom media size, unless the feature is not supported by your printer itself).
As a workaround try choosing the "Portrait" radio button in the print dialog and selecting the "Auto Rotate and Center" checkbox. This should give you the expected results.
Hope this helps.
Sincerely,
Neha

Cannot print specific pages in Leopard

How do I print only page 2 and 3 of a fifty page document?

What application are you attempting to print from? There should be some option in the print dialog to print only certain pages but it may vary from app to app. There should be some "radio buttons" that you can select from to print everything or only a range of pages....no?

I cannot print to my wireless Canon printer. A communication error has occurred.

I have had no problems printing to my wireless Canon printer until yesterday. Now when I try to print the icon at the bottom shows a printing job has been started but nothing ever prints. When I open the print cache it tells me that "A communication error has occurred." I've checked the printer and it is still set up properly. I have unplugged my wireless router and modem to reset, but this has not interrupted my ability to access internet nor has it reset the printer to a different setting. I am at a loss as to why I can't print any longer. Since we bought the mac in July I haven't had any problems and this really has thrown me for a loop as to why it is occuring. Any thoughts would be greatly appreciated.

Perhaps one of the printer drivers is corrupt. Go to http://www.canon.com.au/en-AU/Support-Services/Drivers-and-Downloads (or other country download).

Suddenly cannot print to Canon wireless printer

I'm on an iMac with Yosemite 10.10.3 and also have two Macbooks on the same network. We have been using a Canon MG6620 wireless printer for several months without a hitch. Suddenly, between documents, the printer and computers stopped talking to each other. The printer still thinks it's on the network when I check its configuration. AirPort Utility still shows it being connected to the network via my AirPort Extreme. It still shows as the default printer in System Preferences. Yet, when I try to print I get an error that says "the printer is not connected to the network." I have restarted/rebooted the computers and the printer. I have reset the printer preferences. I have unplugged the printer. I have tried printing from the Macbooks. Nothing is working, and this happened literally between me printing two different documents!!! I'm at a loss for an explanation. Any guidance would be appreciated. Oh, and this all started BEFORE I updated to 10.10.3, so don't blame the update :-)
Tom

trm1745 wrote:
Now everything is working, at least for the moment! I can now see my printer at its IP address but it asks for a password.
Don't worry about that. The main thing is that you can now connect to the internal web page of the printer, which in turn means you can now print to the Canon.

Scanned doc will not print entire page

I have a scanned document in Acrobat 7 using File -> Create pdf from scanner.
Scanned at 400 dpi color.
The document is a printed table with a few handwwritten redlines on it.
In Acrobat, it has 4 "images". One is the entire document and three are the handwritten areas.
When I print, it only prints the handritten "images".
I cannot get it to print the entire document.
I have tried on two different printers and three different computers.
Have not changed any of the Acrobat or scanner prefs from how we have always done this.
Tried using with Recognize text on and off. Same thing.
Any ideas?
TIA
Chris

Chris...go into the Advanced section of the Print dialog and choose Print As Image...this will hopefully give you the results you need. Good Luck!

Cannot print entire page wireless HP 3050 611

Similar Messages

Maybe you are looking for