Cannot print EPSON Stylus Photo 1410 after updating to Yosemite and printer update'

After updating Mac in Yosemite OSX and updating epson printer software I cannot print anymore
tried removing epson printer folder from my library and re-installing but still nothing happen...

This makes my printer works again...
I remove printer folder from library and download this link'
Epson Printer Drivers v2.18 for OS X
Install the driver
and it works'

Similar Messages

  • Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW Why not?r

    Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
    Why not?

    Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
    Why not?

  • Printing from iPhoto 08 on Printer Epson Stylus Photos Rx 500?

    Up to before I purchase a new 20" Mac OSX 1.5 Leopard from Tiger X 1.4.9 I had no problems printing on my Epson Stylus Photo RX500, but, even after having a new driver for Epson,the printing is a "****", I no longer have, as before the ability to chose the quality of print which I desire, I mean the best rendition for subject which I photographed, like Portraits, I no longer can control the printing speed as I used to before (for qualities) and am left with photos with lines, no matter what I do. I wasted 2 sets of ink cartridges, and lots of papers to try to circumvent the problem, to no avail. Sometimes using mat paper works well, glossy no.
    Cam I have some help ? Tanks.

    I had the same problem. The new driver I downloaded never worked properly. I ended up buying a new printer. I still use my Epson to scan with no problem. I actually need a part for my Epson RX 500 if you'd be willing to part with your scanner lid for a price. [email protected]

  • Why isn't my printer (epson stylus photo 820) working anymore??

    HI,
    I am having problems with my printer, an epson stylus photo 820. I have been using it for a long time, and suddenly for no reason, it refuses to print!
    When I am trying to print something, in the stylus photo 820 dialogue box, it says "printing" under "status" but nothing happens for about 6-7 minutes. Then, the printer makes a noise and in the dialogue box it says "jobs stopped."
    I have trying to reinstall the software that came with the printer, but it did not solve anything.
    Thank you for your help.
    733 MHz Power PC G4   Mac OS X (10.3.9)   384 MB SDRAM

    You're Welcome highonthesound!
    As I no longer have the Epson drivers installed, I'm not exactly sure how you can check which driver you currently are using.
    If the procedure posted below doesn't work, the Epson may be dead. This worked for my Epson C86 whenever I encountered problems.
    Change any C86 reference I may have missed editing, to your 820 model.
    * Download the driver from Epson - 820, Printer Driver v1.8bAs
    * Before moving the folder & files listed below, to a Temporary Epson Trash Folder, that you should create on the Desktop, open Printer Setup Utility, and delete the 820.
    * Quit Printer Setup Utility
    * Move the files (Posted in CAPITALIZED Italics), to the newly created Temporary Epson Trash Folder
    HD > Applications >
    EPSON PRINTER UTILITY (Alias)
    HD > Users > Your Home > Library > Preferences >
    COM.EPSON.IJPRINTER.UTILITY.PLIST
    COM.APPLE.PRINT.CUSTOMPRESETS.PLIST
    COM.APPLE.PRINT.PRINTCENTER.PLIST
    COM.APPLE.PRINT.PRINTERPROXY.INTERNAL_MODEM.PLIST
    COM.APPLE.PRINT.PRINTINGPREFS.PLIST
    HD > Library > Printers >
    EPSON (Folder) Only move this folder if you have no other
    Epson products
    I also had a Epson OS X booklet.pdf, that I had saved in my Documents folder. You will get a new one. After the installation, I replaced it. You may not have saved your original one. It's no big deal, there's really not much in it, In fact I don't remember the last time I opened it!
    * Quit ALL running Applications
    * Repair Permissions using Disk Utility in the Utilities folder
    * Dig out your Epson 820 Start Here instruction quick sheet, for reference
    * Unplug the USB cable from the Mac & then from the 820
    * Re-attach the USB cable to the 820 & then to the Mac
    * Turn on your 820
    * Double click on: epson11518.sea.hqx to unzip (This may have a different name)
    * Double click on: epson11518.sea to expand (As well as this one)
    * Follow the prompts & instructions
    * When the Vise installer opens in a window, double click it to start the install
    * When the installation is complete, turn off the printer & restart your Mac.
    * Repair Permisions again
    * Turn on the 820
    * Open Printer Setup Utility
    * You have no printers available will appear. Click Add
    * Select Epson USB in the contextual menu
    * Click on Stylus 820 to highlight
    * Add Page Setup: select All, from the contextual menu
    * Click Add
    * Quit Printer Setup Utility
    The images below, that are left on the Desktop, can be trashed, unless you prefer to keep the installer. (These may have different names as well)
    epson11518.sea.hqx
    epson11518.sea
    C86Series_1.8bAs.dmg
    ali b

  • I upgraded my computer, now I can't use my scanner on Printer, Epson Stylus Photo TX650

    I have an apple computer, and upgraded it, now I can't scan photo's from my Epson Stylus Photo TX650 printer.
    I have an OSX version 10.9.5 computer
    When I click on scan on my printer, I get this message  ( " you can't use this version of the application "Epson Scan" with this version of OSX You have
    "Epson Scan" 3.7.1)
    Can you help me,
    Thanks

    Have you checked the Epson web site for an update?
    Try using Applications/Image Capture.

  • Borderless printing, Epson stylus photo 820

    Ok, I'm trying to print this: http://www.thecoverproject.net/view.php?cover_id=1716
    On an Epson Stylus Photo 820. I know this printer can do borderless prints, I just can't figure out how. Is this a driver issue or something? Is borderless printing on this printer a PC only feature? Am I missing something entirely?
    Thanks for any help!

    I don't have experience with the Stylus Photo 820, but I do have a Stylus Photo 890 and unfortunately borderless printing is not possible in OS X, even with the latest drivers. I went round and round with this with Epson Tech Support, who kept sending me suggestions that didn't work and finally they admitted that it was just not possible. I doubt that Epson will further update the drivers for these rather elderly printers.
    Bob N.
    Mac Mini 1.5 GHz; iBook 900 mHz; iPod 20 GB   Mac OS X (10.4.8)  

  • The part "scanner" of my all in one printer epson stylus photo PX 720 WD is not on duty and no driver ready to use some informations about drivers epson and mavericks ?

    some news for drivers os x mavericks and epson stylus photo px720wd ?
    the part "printer" is ok
    the part "scanner" is of duty because no driver found
    thanks

    Try using the pre installed Image Capture app in your Applications folder.
    Connect the scanner to your Mac whether Wi-Fi or USB.
    Launch Image Capture.
    Click the very small black box bottom left side of the Image Capture window.
    You'll see this pop up menu:   Connecting this (device) opens:
    You can select a default app to scan (Image Capture) and select a folder from the Imort To pop up menu on the right to save scanned files to.

  • Cannot print on EPSON Stylus Photo R230 after my Yosemite update OXSUpdcombo 10.10.3.dmg

    After I Updating our iMac 21.5”  i5, Mac Pro 13” i5 and 15” i7 ( Retina ) with OXSUpdcombo10.10.3, we cannot print on my Epson,  connection via USB, Printer Driver still there, I try to un install and reinstall with driver EPSONPrinterDriver3.0.dmg ,  but it still don’t work.
    But Our Mac Pro 13" i7 don't up date OXSUpdcombo still can print with Epson, although through Wifi
    Apple Family

    Hi
    1. Click on the Apple logo at the top left corner of the screen and select System Preferences.
    2. Click on Printers and Scanners pane.
    3. You need to highlight your printer on the left hand side and remove it from the list by clicking on little "-" button
    4. Click on little "+" button and add it back.
    You may also try to reset printer settings

  • Cannot add Epson stylus photo 1400 to printer list

    Hi,
    I just unpacked my new printer, however I don't seem to be able to install it properly. I have tried both the the driver from the website as well as the one that came with it on CD. First, installing seems to go smoothly. Then I get to a screen telling me that before I can print I will have to add it to the printer list. The next screen gives me the printer list with the Epson Stylus's name on it. However, clicking on it I am not able to select the proper device name. It just doesn't appear on the list. (click here for a screenshot: http://img8.imageshack.us/img8/8601/bild15zy6.png ) Finally, the Epson driver installation app tells me that my printer "has not been added to the printer list" and that I should better go back and try again. "Running a printer check" actually makes it draw paper in but doesn't print anyhow.
    Could someone help me with this?
    Thanks a lot.

    I now managed to install my printer. To state my problem first, so people don't have to read the whole thread again:
    My printer (this should be printer model independent) is connected directly via USB to my macbook. When I tried to add it to my printer list, I recieved the message "Error: -9672, An error occurred while trying to add the selected printer"
    As I gathered from the forums, this points to missing rights during installation. In a lucky guess, I logged onto my computer not with my usual account but with the admin account and from there I could install it without any problems!
    That is a bit strange as I should have been able to assign admin rights via entering the password from my usual account, but there you go. Strange are the ways of Apple (as with my most favourite mac problem/solution of all times: when you use the password reset feature from the install DVD, it uses an english keyboard layout, but in the standard log-in window it uses whatever the locale is set to, thus e.g. mixing z und y in German layout amongst others. This small misunderstanding cost me hours over christmas! Just thought I'd mention it in case anyone has similar trouble)
    I hope this helps,
    Otto

  • Error when trying to print-Epson Stylus Photo R300-missing drivers

    I just purchased I Life 06 and installed on my IMAC G5. The computer locked up after I tried to open an IDVD file and I had to shut off the power to shut it down. I started up the MAC and it got stuck on the printer install..I called tech support and they ran the repair disk and inserted the Epson CD that has the drivers on it and the mac says that the drivers are already there. I go to print utility and it shows the Epson printer but no drivers. Please help, the printer worked just fine before I installed I Life 06...Mac tech support said that it is an Epson issue.

    Hello SoccerLover,
    First of all, welcome to the Apple discussions.
    When you got the Epson printer CD, that there is a un-installer on the CD. Run it an run Disk Utilities repair permissions.
    After you finished do a Finder search to make sure that the un-installer worked perfectly.
    Now try to re-install the Epson Printer again.
    Let me know if so ...
    Good luck ...
    Dimaxum <]:~))

  • Epson Stylus Photo R2880 feeds paper straight through without printing

    So I recently got an Epson R2880 at work, and it at first it was awesome. After a few days, it started feeding paper straight through without printing (it doesn't even pretend to print) and telling me that the "Media [is] out or not loaded correctly". I went back and forth with Epson on it for a bit, and they ended up sending me a new printer.
    The new printer seemed to work fine for a day or so, and then it started doing the same thing. If I turn it off and remove it from my printers list and then turn it back on and try again, sometimes it will make a print before starting to feed straight through again.
    Here in the office, most of my printing consists of PDFs that I do through Acrobat XI. Some of them are borderless, some of them aren't. I have also tried printing from Preview and straight from InDesign CC and received the same results. I have tried multiple USB cables and my permissions are all in order.
    I am running Mavericks 10.9.2 on a 2013 Mac Pro.
    Since it seems fairly unlikely that I received two consecutive printers that have the same problem, I'm thinking that the problem is with something on my end. I'm willing to entertain the possibility that my luck really is bad enough to have two printers feed paper instead of print on it. I'm also willing to entertain the possibility that I'm an idiot and am repeatedly doing something idiotically. Regardless, I'm hoping that someone out there has some experience with this and can point me in the right direction, because holy cow this is annoying and Epson hasn't been super helpful.
    Thank you for reading this.

    I've never seen that one!
    While waiting in the hope that "someone" will know the cause, I suggest you try the two generic fixes I try for all print problems:
    First, Reset the Printing System:
    http://support.apple.com/kb/PH14141
    If that doesn't help, restart from the Recovery partition, and use Disk Utility to repair the hard drive and repair permissions:
    http://support.apple.com/kb/ht4718
    (just read the first paragraph)

  • On i photo, I can't change the parametrage of my printer epson stylus photo RX620. My photos, when I print aren't ok. With my PC I had no probleme

    I bought a Mac and wanted to print photos with Iphoto. The problem is that I can't change the parametrage as I can do with the mail or safari. The printer isn't done for special paper like photo paper. I called Apple but they didn't find the way to change. Has somebody an idea to do that. Thank you.

    Try this patch.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT1338 Photoshop CC on OS X Mavericks doesn't open printer Epson Stylus Photo RX620

    I get small window: 

    When you go to print, you must create a new Paper Size to match the width
    and length of your desired output.
    Next, when you get to a print window, be sure to select your custom media
    size. Uncheck (deselect) the choice Auto Rotate if that choice is shown in
    the print window. Also, if you have a choice for scaling, make sure you do
    not use Scale to Fit. Instead, choose Scale and enter 100% for the scaling
    value. After you enter the 100% in the box, be sure to hit the Tab key on
    your keyboard. The value you enter will only be accepted if you "Tab out
    of the box".
    I have also posted this reply to your bug report at https://sourceforge.net/tracker/?func=detail&atid=101537&aid=3169505&group_id=15 37

  • Epson Stylus Photo R1800 on Linksys Printer server

    hi, I'm currently running Tiger 10.4.11 on my power book G4 and trying to connect to a network printer on a Linksys Print Server (PSUS4). The printer connected to the server is an Epson Stylus Photo R1800.
    I'm able to print perfectly from my computer via USB direct, but when I try to find the printer as a network printer I can't locate it.
    The print utilities finds the location of printer from the Linksys server, but none of my drivers are coming up that are compatible to the printer when it finds it like that.
    When the printer is turned on the print browser cannot find it at all, but when it's turned off the browser comes up with the name Linsys gave it to be discovered. It says it's connected via AppleTalk, but when I click on it to try to add the driver doesn't come up. BUT it's the correct driver when I connect manually.
    What am I doing wrong? I was on the phone with tech support for an hour and 24 minutes only to be told (when transferred to a specialist) that they aren't trained for this kind of thing, neither is Linksys (who I spoke to for 30 minutes). I read the thread on the similar issue to this and don't think that it's a driver issue, but a print server issue, what do you think??
    thanks for any help.
    -melissa

    Driver issue - the driver provided by Epson was written for USB only (well, maybe Firewire too for the 1800). You will have to use either the Gutenprint driver or the printfab driver for network printing:
    http://gimp-print.sourceforge.net/MacOSX.php3
    http://www.printfab.net
    Sounds like your print server will work via appletalk -- but, if you want to try IP printing, don't forget to enter the correct queue name for the LPD and IPP protocols.

  • Purchase advice? Considering the Epson Stylus Photo R3000 Inkjet Printer

    Please advise - we're considering the purchase of the Epson Stylus Photo R3000 Inkjet Printer.
    Replacing an Epson Stylus Photo R1900 after years of frustration due to no support for printing from Illustrator on a Mac. Many others have posted in frustration as well - a common work-around is to save as PDF, then print from PDF. Our work-around involves PrintFab but we would like to remove that element from the equation.
    We have a sizable investment in Epson paper so staying within the Epson family is necessary.
    Also must be able to print at 13x19 inches (Super B) which limits our choices.
    Given all of the above, can anyone advise for or against the R3000?
    Thanks in advance!
    -Chris

    This Apple document says the driver is available for auto-download and install when you add the printer in Print & Scan:
    OS X: Printer and scanner software available for download
    OS X has a new paradigm for getting print drivers.
    Manufacturers give the current driver(s) to Apple to put on its servers.
    OS X keeps an "index" of where to find drivers (whether on the server or already installed on your Mac), and when you Add the printer in Print & Scan prefs, or on demand in the print dialog, OS X finds and uses the driver.
    No need to download and install anything yourself.
    If your Mac says it can't find the driver, you can force CUPS (OS X's print system) to re-build the index of drivers (both online and already installed drivers) by Resetting Printing System:
    OS X Mavericks: Reset the printing system
    If you're still not getting it working, you can download and install all the epson drivers from:
    Epson Printer Drivers v2.18 for OS X
    (you may still need to Reset Printing in order to have the drivers found.)

Maybe you are looking for