Cannot print from ibook on a windows network

I have a new iBook that is linked to my Linksys Wireless Cable Gateway. On the same network, my Windows XP desktop with attached Epson Stylus Photo R220 is attached.
I have enabled sharing for that printer via the desktop PC.
I located the printer, "EpsonSty", on my iBook but when I attempt to print to it, it gives me two errors.... the first is a denied NT access message and later, something about not being able to print to Samba.
Is there an easy fix so I can print to my Epson from my iBook via the network?

Printing to a printer on a XP PC from a Mac running 10.4.x
http://www.ifelix.co.uk/tech/3015.html
iFelix

Similar Messages

Can't print from iBook G4 via Windows XP to an HP PSC 1410

Hello,
I realize this question is very similar to others on this discussion but I haven't been able to find an answer to my problem.
I cannot print from my iBook via XP to an HP PSC 1410.
I can print from my iBook via XP to an HP LaserJet 4L.
I was able to print from my iBook via XP to an HP882C that was connected
to the same USB port that the HP PSC 1410 is connected to now.
I have an iBook G4 running 10.4.3
I have a PC running XP with an HP LaserJet 4L on a parallel port and an HP PSC 1410 on a USB port.
I installed the following from http://www.linuxprinting.org/macosx/hpijs/
hpijs-foomatic-2.02.ppc.dmg
espgs-7.07.1.ppc.dmg
HP-PSC_1400-hpijs.ppd
I think I correctly followed the instructions at:
http://www.ifelix.co.uk/tech/3015.html
They worked for the LaserJet printer.
When I attempt to print from the iBook to the 1410 the HP doesn't print at all.
I don't see any error messages on the iBook. The document gets spooled onto the Windows print spooler, the printer even starts making noises, the print heads move about a bit and then stop. The print job just sits there in the queue with a status of "Printing". The print job is then stuck and hard to delete.
I don't need to be able to scan or check ink levels from the iBook.
I would just like to be able to do color printing.
What else should I try? Given the symptoms where might I be going wrong?
Any suggestions would be appreciated.
iBook G4 Mac OS X (10.4.3) 1 Gig RAM

I found the answer to this problem on Linux printing provided by Steve Stuart.
Dave
Steve Stuart wrote at: http://www.linuxprinting.org/forums.cgigroup=linuxprinting.macosx.general;articl e=1446
Hi all,
I finally figured out what the issue was, Why it fixes it I can not say,
but it does.
On the Shared printer on the Windows side, go to the properties of the Printer.
Go to the Ports tab, and deselect the "Enable bidirectional Support" (do not
have it checked). Once this is done and you also do not have any firewalls
setup on the Windows machine (Windows, MCAfee, Norton, ....). You should be
able to print.
Finally!!!!! I hope this helps many many people. As I have had many
people asking for the solution if I found it.
Thanks,
Steven Stuart

Can"t print from iBook G4 to windows HP890c Printer

I have been trying to print from an apple iBook G4 to a HP 890c Windows printer. I can see the 3 pc's in the workgroup from the apple and can file share with them but cannot print. I can install the HP 890C in windows printing using the dialog boxes but I get the NTStatus_BadName error when attempting to print.
Which computer do you download and install the hpijs and the ESP ghostscript? I imagine its to the PC which the printers are attached but want to verify.
Also, even though I added the iBook G4 to the workgroup, it does not show up. It does show up with servers. I cannot see the ibook from any of thje PC workgroup computers. Could this be part of my path problem.

hpijs and ESP ghostscript are for OS X. But, you have a network-capable driver (Deskjet 890C, Gimp-Print) already included in OS X. Your problem appears to be in the Windows sharing (Samba=smb) system.
Try adding the printer using the advanced windows printing method: After clicking add, Hold down option key and click More Printers. Select Advanced at the bottom of the first menu. Select Windows Printing via Samba (I think that's what it says). Enter the URI like this:
smb://[IP address of server]/[printer share name from Windows]

Cannot print from Windows Live photo gallery

I cannot print from Windows Live Photo Gallery. The printer is connected and has a signal.

This printer is an HP Photosmart Touchscreen. I have since resolved the problem by uninstalling, and reinstalling the printer. Not sure what the problem was, but it is now working. Thank you for your help.

HP900 Inkjet - Cannot print from Macbook air 2014

Hi
I have a HP900 inkjet printer connected via a Windows PC on my network.
I can see and connect to that printer from my MacBook via the network (by connecting to the PC).
But unable to select the correct drivers. Hence unable to print.
Connected the printer directly to my MacBook air using an USB cable.
Didn’t recognise.
My preference is to use it though the network via the windows PC.
Much appreciated if you could help me to get this issue resolved.
Thank you.

Hi ielk,
Thank you for your reply!
After some further research I found that this printer is not compatible with Mac. That is why you cannot find any drivers.
According to this drivers page, HP 900 Inkjet Printer Drivers, this printer is only supported on, Windows XP, Windows 2000, and Windows Vista (32-Bit and 64-bit).
If you are looking for a compatible printer, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this information helps you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printing From iBook To Printer on a Vista, Can't see Vista shared printers

Printing From iBook To Printer on Windows Vista Desktop, Can't see shared printer on a Vista machine from a Mac, although Windows notebooks find it immediately. When same machine is booted into XP the priners share perfectly with both of my iBooks, but when the same machine is booted into Vista with the printer shared etc, the iBooks don't see the printer. Other Windows machines on the newtork do see the shared printers in Vista.
I have previously always had success sharing printers on Windows XP machines with my iBooks. . However upon installing Vista on my desktop I find I can no longer find the printer in the Mac's printer setup utility. When I dual boot back to XP everything works fine, but on the same machine when I boot into Vista I am unble to see the printers. The Mac printer setup utility finds the Vista machine on the network, but the printers are never visible. Is their some secret or channge in Vista that prevents Mac's running , in my case,Tiger 10.4.8 from seeing a shared printer on a computer running Vista
On the Vista machine, if I boot into XP The printer is shared and Windows notebooks can print to it, but neither of my iBooks can see the Printers when Vista is running.
ibook G4 1.33ghz 12, 1.42ghz 14 Mac OS X (10.4.8) 1gig ram,

Some good resources:
http://articles.techrepublic.com.com/5100-10877_11-6174109.html
http://discussions.apple.com/thread.jspa?messageID=4305954&#4305954
http://www.microsoft.com/technet/network/evaluate/vista_fp.mspx
After none of these hints worked for me I plugged my Xerox Phaser 6120 into an airport express base station via USB. Even though Apple does not say that the Bonjour for Windows printer wizard works for Vista, it does. Download it from http://www.apple.com/support/downloads/bonjourforwindows.html and install it on your PC.
PowerBook G4s Mac OS X (10.4.9) Windows XP & Windows Vista Boxes

Printing From iBook To Printer on Vista Desktop, Cant see shared printers

Printing From iBook To Printer on Windows Vista Desktop, Can't see shared printer on a Vista machine from a Mac, although Windows notebooks find it immediately.
I have previously always had success sharing printers on Windows XP machines with my iBooks. . However upon installing Vista RC1 on my desktop I find I can no longer find the printer in the Mac's printer setup utility. When I dual boot back to XP everything works fine, but on the same machine when I boot into Vista I am unble to see the printers. The Mac printer setup utility finds the Vista machine on the network, but the printers are never visible. Is their some secret or channge in Vista that prevents Mac's running , in my case,Tiger 10.4.8 from seeing a shared printer on a computer running Vista
On the Vista machine, if I boot into XP The printer is shared and Windows notebooks can print to it, but neither of my iBooks can see the Printers when Vista is running.
ibook G4 1.33ghz 12, 1.42ghz 14 Mac OS X (10.4.8) 1gig ram,

That might have been the situation for the beta's and first RC's, but I have a final build. Plus the fact that other Windoze notebooks see the printer on the Vista box just fine leads one to believe it is a mac/Vista specific issue.
If anyone actually has experience with a MAC and Vista , I would appreciate hearing from you.
thanks,

Printing From iBook To Printer on Vista Desktop, Can't see shared printers

Printing From iBook To Printer on Windows Vista Desktop, Can't see shared printer on a Vista machine from a Mac, although Windows notebooks find it immediately.
I have previously always had success sharing printers on Windows XP machines with my iBooks. . However upon installing Vista RC1 on my desktop I find I can no longer find the printer in the Mac's printer setup utility. When I dual boot back to XP everything works fine, but on the same machine when I boot into Vista I am unble to see the printers. The Mac printer setup utility finds the Vista machine on the network, but the printers are never visible. Is their some secret or channge in Vista that prevents Mac's running , in my case,Tiger 10.4.8 from seeing a shared printer on a computer running Vista
On the Vista machine, if I boot into XP The printer is shared and Windows notebooks can print to it, but neither of my iBooks can see the Printers when Vista is running.

That might have been the situation for the beta's and first RC's, but I have a final build. Plus the fact that other Windoze notebooks see the printer on the Vista box just fine leads one to believe it is a mac/Vista specific issue.
If anyone actually has experience with a MAC and Vista , I would appreciate hearing from you.
thanks,

Cannot print from my pixma 450 using apps

Hi I have an asus vivo tab smart tablet which has been wireless printing normally from both desktop and apps. Suddenly stopped printing from all apps. I get message saying cannot connect to printer please check its connected and try again. It still prints normally from the desktop using the same programs that dont print as apps from the metro start screen e.g. mail, internet explorer and dropbox.
I have run all the troubleshooters and uninstalled and then reinstalled the printer several times to no effect.
Any suggestions would be gratefully received

Sorry, misunderstanding. I have not been able to print from my iOS devices on my Win7 network. Hence my move to purchase an iMac to try to create a homogenious environment. I'd thought I'd read somewhere that I could print to "Mac shared printers...". My previous reference to "printing on my Win7 network.." was referring to my ability to share printers on Win7 machines and print from any Windows based computer on my network. No success as of yet printing on either Win7 nor Apple OS networks.
So my search continues for a solution to print from my iPad on my network [wirelessly of course].
I just made an assumption based on some readying that if I purchased an iMac and shared my printer(s), my iOS printing issues would be resolved, and I'd have a nice new computer for my family to use. So far 1 out of 2 objectives met.

Cannot print from hp DeskJet F4580

I have just bought my first MacBook with Mac OS X 10.6.4. Great computer.
However I cannot print from the wireless hp printer. I downloaded the latest driver from hp (maybe a fault) and started to install. Everything went as expected untill the setup process of the Printer Queue. Here I add the printer in order to create the Printer Queue, but when I click on the continue buttom I get this warning: Are you sure you want to continue without adding a Print Queue? I finished the installation with a congratulation sign.
Therefore there is no doubt, that the printer queue is missing. However I cannot found out to install the printer queue.
The printer is a socalled all-in-one printer. The scanner function is perfect with the wireless connection. But not the printer function.
I have also tried to connect via usb cabel. The result is the same. Scanner okay. Printer not okay.
The printer works perfect under Windows.
I hope somebody can help me. Thanks in advance.
Erik

I'm having the same problem ! The wireless printing works using OS 10.5 on a G4 PowerBook but not OS 10.6 on an intel MacBook. I'm going to get in touch with HP as have used the latest drivers (as you have) - I've re-installed the HP software using Software Update for the latest version - still can't print. USB printing is also faulty so must be their drivers.
I'll let you know if I have any luck !
Simon

Cannot print from web sites after update to FF 7.0.1

cannot print from web sites after update to FF 7.0.1
Printing from my email account (Cox) is OK
System Windows Vista

When my wife updated Firefox to version 7.0.1 she was no longer able to print items from the web such as coupons. She can print from her email (Cox) account.
She is running Vista.
When I updated to Firefox 7.0.1, I did not have a problem. I am running Vista also.
Tried using the Firefox help page but no help so far.
I did notice that on her computer in the "Plugins" for Firefox that HP Smart Web Printing is now disabled and is not compatible with Firefox 7.0.1. She had no problems until she did the update.

I cannot print from firefox. I can print from open office. It seems to have something to do with when frames open because in IE, I can print a whole page, but when I try to use a print button embeded in a page or frame it does not work.

Cannot print from firefox at all.
In Internet Explorer, I was able to print by pushing the print button, but when opening a frame, like in mapquest, the embedded print button brings up an options window that has print frames options in it, but when hit OK in this box, a second error box comes up with a yellow exclamation point and nothing prints. I have a feeling that it is the same problem with both browsers, but would prefer using firefox. Can you help with this?

Yes, I tried that.   The files were ordered by their original numbers as imported from the camera, but I batched them through Phocoshop to downsize all of them into a more manageable file size.   I opened that destination folder from quick time from where it said select image sequence.   I clicked on the first one and opened it.   The result was a large image with an arrow indicating a movie was ready to go.   When I pressed the arrow, though, I realized it had only imported that one frame so there was no movie.   The files are Jpgs and are about 450 KB each.
    To your knowledge are there any links to iMovie tutorials or quick time tutorials that may address this situation? Maybe there will be one I haven't looked at yet.
    Thanks

Cannot print from Firefox

For some time now I cannot print from Firefox. I thought it might be a glitch after an update, but have updated again since and it still does not work. If I try to print to a printer, nothing happens. If choose print and then save to PDF it seems to work, but then when I try to open the file I get an error message from Adobe saying "There was an error opening this document. The file is damaged and could not be repaired.". On the other hand, I can print and save to PDF from Safari without any problem. I am using Mac OSX 10.5.8, Firefox 6.0.2.
Any help would be much appreciated!

Hi,
Please do a CLEAN install:
Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
Note: You might want to print these steps or view them in another browser.
Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
Delete the Firefox installation folder, which is located in one of these locations, by default:
Windows:
C:\Program Files\Mozilla Firefox
C:\Program Files (x86)\Mozilla Firefox
Mac: Delete Firefox from the Applications folder.
Linux: If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see Install Firefox on Linux. If you downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
Now, go ahead and reinstall Firefox:
Double-click the downloaded installation file and go through the steps of the installation wizard.
Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Source: https://support.mozilla.org/en-US/questions/963429
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I cannot print from Adobe on My Mac

I have tried all I know to do, but I cannot print from Adobe Acrobat Pro 9 from my Mac running Mac OSX - 10.5.7. I have two different printers - a Cannon MF4150 & an HP Color Laserjet 2550. When I click print, the preview is not available and it just goes into queue and never prints. I am also running VMware Fusion -- I cannot get it to print from the Windows XP virutal machine either. I am using just the standard Adobe Reader 9 in the Windows side. I don't know what could possibly be wrong. The Windows XP side is printing through a sharing mode with the mac side. Does anyone have any idea what might be wrong?

I've tried that multiple times as well as resetting the printers themselves. I've deleted and re-added the drivers as well. Any other suggestions?

Cannot print from internet

I have an HP computer, HP office jet 6600 hooked up wirelessly, can print from windows but cannot print from the internet. When I did a windows trouble shooter, it came up with missing microsoft teredo tunneling adaptor/driver. I tried downloading the repair for it and it started a scan that started at 10 PM and was still running the next morning. I removed tht from the computer but still cannot print from internet. Can anyone help me?

Hi @Cabon,
Welcome to the HP Forums!
I see that you can print from Windows, but not from the internet. I am happy to help you with this printing issue!
What version of Windows are you using? If you do not know the operating system you are using, please visit this website. Whatsmyos.
In the meantime, please see this printing guide, Print Jobs from Your HP Printer are Stuck in the Print Queue. (Even though the guide title may not match your issue, I believe the solutions will help).
Hope this guide helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot print from ibook on a windows network

Similar Messages

Maybe you are looking for