CANNOT PRINT FROM MACBOOK PRO TO CANON PRO 9000

Hi, this is my first post here. i expect this has been asked before, but here goes. Yesterday i tried to connect my MACbook pro to my CANON pro 9000.I have tried everything i can think of
without success.
I have downloaded print drives from CANON,still does not print.
i have uninstalled the printer and added it again,still does not print.In console log i just keep getting filter error, coming up.
I am completely at a loss now, i am also new to MAC'S i have only had it for two months, so still learning.
therefor, i don't know if i am doing something wrong,or if there is a fault somewhere.The printer itself works fine with a PC.
Any help with this would be much appreciated,
thank you.

Welcome to the Discussions!
Maybe this document will help:
_http://docs.info.apple.com/article.html?artnum=307156_
Joe

Similar Messages

Cannot print from my ipad to canon air printer

Cannot print from my ipad 2

Thanks to searching the community I have got a result. Power off and reboot (press front home button together with top right button) = air print is now recognising my Canon air printer. This reboot is useful for clearing similar types of problems.

Cannot print from Macbook Air to Lexmark x2650 on Windows XP via wireless network (Linksys e1550)

Unable to print from recently purchased Macbook Air via wireless router (Linksys e1550) that is connected Windows XP which is connected to Lexmark x2650 printer. Macbook Air is connected to wireless router and able to access internet. Windows XP printer is set-up for sharing and I am able to see and add printer from Macbook Air. I have installed Lexmark 2600 series driver on Macbook Air. Macbook Air sends print job to print queue and print job is released from queue but does not print on Lexmark printer connected to XP. Any suggestions?

Hi Wade, and Welcome to the dicussions.
I think it's how the PC is setup and interpreting the Mac's drivers, should just pass them on I think, but here's a way to get most any Mac to print to most any printer on an XP machine...
http://iharder.sourceforge.net/current/macosx/winmacprinter/

How to print from Lightroom 5 to Canon pro-100?

When I go to print from Lightroom, the colors on my screen look exactly as I want them. Then I have the color management set to Canon Pro-100 with the type of paper I am using (pro-luster), but when I get the printer setup on my screen, I get different colors (ugly colors). I then print the picture, and I get the same colors that were on my screen for the printer setup (the ugly colors).
how do I set it up that colors will be managed by Lightroom? which option do I select when under the Profile section?
Thanks

I have the same printer, and get excellent results from it. You have two choices; you can either allow Lightroom to manage the color, or you can let the printer manage the color. You don't want both the printer and Lightroom managing the color. If that happens you get bad colors.
To allow Lightroom to manage the color you need to go into the page setup, which opens your printer driver and you need to turn off color management. You also need to set the paper size and paper type based on the profile you are using. There are usually instructions packaged with paper indicating what settings you should choose. After you have set everything appropriately in the printer driver you need to select the appropriate paper profile from the list available to you in Lightroom.
To allow the printer to manage the color, you choose that option in Lightroom. Then in the page setup you need to choose the paper type as well as the exact paper profile that you will be using.

HP900 Inkjet - Cannot print from Macbook air 2014

Hi
I have a HP900 inkjet printer connected via a Windows PC on my network.
I can see and connect to that printer from my MacBook via the network (by connecting to the PC).
But unable to select the correct drivers. Hence unable to print.
Connected the printer directly to my MacBook air using an USB cable.
Didn’t recognise.
My preference is to use it though the network via the windows PC.
Much appreciated if you could help me to get this issue resolved.
Thank you.

Hi ielk,
Thank you for your reply!
After some further research I found that this printer is not compatible with Mac. That is why you cannot find any drivers.
According to this drivers page, HP 900 Inkjet Printer Drivers, this printer is only supported on, Windows XP, Windows 2000, and Windows Vista (32-Bit and 64-bit).
If you are looking for a compatible printer, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this information helps you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot print from MS Office using Canon MP600

I recently upgraded from a Powerbook to an iMac. The normal Apple migration tool worked wonders and everything was working fine.
Last week I was no longer able to print from MS Office. I try out demo's etc. so I'm wondering if something got broken. I've uninstalled as much as I can think of but still no luck. I tried uninstalling Office and the print drivers and then reinstalling everything over again - that didn't work.
Word gives the following error message:
Word cannot print due to a problem with the current printer. Make sure you have a printer selected in Print Center. You may need to print again or adjust your printer settings.
When I look in the console I see the following errors:
2007-02-17 11:37:18.941 Microsoft Word[309] CFLog (21): dyld returns 2 when trying to load /System/Library/Printers/CVs/Converter.plugin/Contents/MacOS/Converter
2007-02-17 11:37:18.941 Microsoft Word[309] CFLog (22): Cannot find function pointer CVFrameworkFactory for factory 33F8D03A-C85F-11D3-8A31-0050E4702C48 in CFBundle/CFPlugIn 0x16885500 </System/Library/Printers/CVs/Converter.plugin> (bundle, not loaded)
2007-02-17 11:37:19.099 Microsoft Word[309] CFLog (21): dyld returns 2 when trying to load /System/Library/Printers/CVs/Converter.plugin/Contents/MacOS/Converter
2007-02-17 11:37:19.100 Microsoft Word[309] CFLog (22): Cannot find function pointer CVFrameworkFactory for factory 33F8D03A-C85F-11D3-8A31-0050E4702C48 in CFBundle/CFPlugIn 0x16885500 </System/Library/Printers/CVs/Converter.plugin> (bundle, not loaded)
Anyone have any idea what I've messed up? Any thoughts on how to fix this would be appreciated.
Chris
iMac, 24", 2GB Mac OS X (10.4.8)

Looks like I solved this. Unfortunately I don't know why it started doing this.
I tried a number of things - uninstalling Office, reinstalling Office, uninstalling the print drivers, reinstalling the print drivers, removing all caches, etc., etc.
After doing some sniffing around on some other questions it seems like this is a problem with a number applications. The repeated solution mentioned reinstalling Mac OSX but to maintain and archive the user accounts on the computer. I did this based on the following link:
http://manuals.info.apple.com/en/TigerInstall_SetupGuide.pdf
After doing that I reinstalled the print drivers, completed the install of Office 2004 and everything worked. Doing the reinstall removed all my Haxies. I'm starting to think it had to do with that. I'll likely apply them one at a time and see which one breaks it.
iMac, 24", 2GB Mac OS X (10.4.8)

Cannot print from macbook pro to printer connected to vista pc

My window PC broke and I changed it. My new PC runs window vista 64 bit. My new printer, connected to my new PC, is a HP Deskjet F4480. I have 4 PCs in the house. All PCs can print on my HP printer thru my home network EXCEPT MY MACKBOOK PRO that, for unknown reasons, cannot see the printer. My macbook pro runs mac os X version 10.6.1 (the new mac leopar). I call apple support. They are telling me that they cannot support me because they dont know anything about windows. Can someone help me?

Take a look here http://www.mac-connect.com/smbprintmac.php
and her http://guides.macrumors.com/Printingto_a_Shared_PCPrinter
Message was edited by: macbig

Xerox 8560DN pauses when printing from MacBook Pro (Maverick update)

Xerox 8560DN pauses when printing from MacBook Pro using the printer connected to a Windows XP machine. The printer is fully shared, however when I print, it goes to PAUSE. It displays...Ready to print > Printing > and it pauses.
The Maverick update has changed lots of unecessary setups. What was perfectly working before, not it causes problems.
Any solution?

Carolyn Samit,
I did it several times without any success. I think that the Maverick update damaged something.
I also deleted, added and change all settings... Not working. Xerox does not have a Maverick driver available, but today apple released a Xerox printer software update (Version 2.3). After the installation, nothing changed.

Is there any way to print to a canon printer from macbook?

Is there any way to print to a canon printer from macbook?

Yes. What happens when you try?

When i try to print from LR 5 to epson pro 3880, my LR crashes and i can't print. any ideas?

when i try to print from LR 5 to epson pro 3880, my LR crashes and i can't print. any ideas?

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

Cannot air print from ipad 2 to canon MG5370 air printer, cannot air print from ipad 2 to canon MG5370 air printer

cannot air print from ipad 2 to canon MG5370 air printer,

Canon Easy Print free app for iPad might work

Cannot ping or print from MacBook...

I'm having a really strange issue where I cannot print from my MacBook wired or wireless, I can, however, ping and print from my iMac. They are both connected to the same router/wap. I cannot ping anything from the MacBook when it is wired or wireless! All other network functions work normally though, I can access the internet and screen share over my local network... but I cannot ping to or from the MacBook.. weird eh? Can someone please shed some light on this? Thanks!
Dan O

Have you tried to log in as a different user then trying from there. If you do not have a different user just create one...
Go to Sys Pref/accounts then click on the lock at the bottom left corner put in the admin password then the plus button at the bottom left of accounts window will become active, press it to create a new account.
If the ping and print work from that account then you'll know the problem is not OSX globally, at it may be fix by trashing some .plist? Not sure which ones yet.
Message was edited by: iyacyas

I cannot print from Sharp 2610 after installing Yosemite

I cannot print from Sharp 2610 after installing Yosemite from my MacBook Pro. How can i get this to work?

Is there anything in "All Messages" or /var/log/cups/error_log in /Utilities/Console? Is there an updated driver? Do you get this problem printing form all apps or just Apple apps?

I cannot print from Adobe on My Mac

I have tried all I know to do, but I cannot print from Adobe Acrobat Pro 9 from my Mac running Mac OSX - 10.5.7. I have two different printers - a Cannon MF4150 & an HP Color Laserjet 2550. When I click print, the preview is not available and it just goes into queue and never prints. I am also running VMware Fusion -- I cannot get it to print from the Windows XP virutal machine either. I am using just the standard Adobe Reader 9 in the Windows side. I don't know what could possibly be wrong. The Windows XP side is printing through a sharing mode with the mac side. Does anyone have any idea what might be wrong?

I've tried that multiple times as well as resetting the printers themselves. I've deleted and re-added the drivers as well. Any other suggestions?

NT_STATUS_UNSUCCESSFUL when printing from MacBook to shared Windows Printer

Hello Mac gurus,
I'm researching the issue I'm having when trying to print from MacBook Pro (connected to a home network via Ethernet cable) to an HPLaserJet 6MP/PS printer, which is connected to a Windows XP SP2 computer via LPT1 port. This printer is shared and successfully used by another Win PC connected via NegGear router.
I've followed the instructions to install the printer on my Mac here and here . I don't seem to have problems installing the printer. My Mac can see the printer, successfully installs it, tells me it is idle, but when I print it generates this error:
Connection fail with error NTSTATUSUNSUCCESSFUL and then after a few seconds: Unable to connect to SAMBA host, will retry in 60 sec. The printer never received any signals.
I've seen some replies here about workarounds, installing Ghost and other software. Since I have a PostScript printer, is it relevant in my case? I also read that Mac will print only to USB connected printers, is that true and that is where my problem is?
Please help.
MacPro Book Mac OS X (10.4.9) home networked
MacPro Book Mac OS X (10.4.9) home networked

Thanks for replying.
1. I shortened the share printer name in my Windows (following the instructions I mentioned above, before I posted my message), there are no special characters or spaces.
2. Mac and PCs are on the same network.
3. Printer Share is allowed on the Windows PC (not blocked). Since other PC can print to that printer, than I guess Print Share is functioning.
4. I found the directory Access on the Mac, but don't know what to do there :confused: I see that smb is used as a Network protocol. The rest I have no clue.
MacPro Book Mac OS X (10.4.9) home networked

CANNOT PRINT FROM MACBOOK PRO TO CANON PRO 9000

Similar Messages

Maybe you are looking for