Cannot print from the web although everything else prints ok - when asked to print I get one blank page then nothing

I cannot print from the Web all else prints OK the printer throws out a plain sheet of paper and the print preview is blank
== This happened ==
Every time Firefox opened
== about six weeks

Try This!
1) Go to Print Preview
2) Print
3) Name: HP PSC 2100 series (depend on your printer)
4) Properties...
5) Paper size: letter
6) Change to Paper size: A6
7) OK
8) Repeat step 4 again
9) Change back again Paper size: letter
10) OK
11) Don't print, but go back to Print Preview again and see if it works
This is the one that have work for me after trying several times modifying about:config with no success. Good luck and hope that will help.

Similar Messages

  • I cannot set up page set prior to printing. From file to Page set then it comes up full depth..running off the bottom. I cannot print from the web

    Question
    I cannot set up page set prior to printing.
    I go from File to Page set which comes up very narrow and tabs Format& Options and Margins Headers/Footers.
    These are full depth..running off the bottom. I cannot set footers. I cannot print from the web
    When I go to Print Preview I get a totally gray screen

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • HP Officejet 4630 Printer....how do change from the default setting when printing from the web?

    HP Officejet 4630.....Windows 8, 64-bit
    When printing from the web I am not able to change the print size.
    1. Click File on Menu bar
    2. Click Print open dialog box
    3. Click Properties open printing shortcuts
    Everything in Printing Shortcuts have a lock on it. Including Factory Default.
    Any and all help with this problem will be appreciated.
    Thank you in advance

    I posted this to the wrong board. Can it be move to the right one?
    thank you

  • HP 309c wireless printer. How do I get it to print from the web?

    I have two wireless laptops. The older one prints perfectly. The new one prints from Word and pdf files. When I attempt to print from the web, the ink mechanism in the printer goes back and forth inside sounds like it is producing a document, however, when the paper comes to the tray, there is nothing but a blank sheet of paper. I have unplugged everything, reinstalled the printer, cleaned the rollers and it still continues to produce a blank sheet of paper. Any suggestions?

    Since the printer can produce good prints using certain PCs and software, it is not a printer problem.  It is likely a software problem. 
    What operating system are you using?  Are you using Internet Explorer 8 as your browser?  Do you have HP WebPrint installed?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Can't print from the web

    no matter what i do i can not get any part of a web page to show up in "print preview" and therefore I can not print from the web.  Using an HP Officejet Pro L7580 All in one, running Vista 32 bit, and IE 9. Have already uninstalled and reinstalled printer, drivers, etc.  Any ideas?

    Hi there I hope you are doing well and sorry to learn that you are having this issue;
    when you reinstalled the printer did you download the latest driver,firmware from the HP site? If you did not GO HERE.
    This the main support page of your printer if you need it in the future;
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?cc=us&dlc=en&lang=en&lc=en&product=2512008&task=& 
    Please download and run the HP print and scan doctor .
    Let me know if this finds any errors, I will do my best ot help you if you need further assistance.
    Hope this helps!
    RobertoR
    remember ~▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Duplex Printing from the web with a Macintosh

    I have a MacBook Pro running OSX.5.8 and an HP printer Photosmart C309a.  I have not been able to use duplex printing from the web.  Any suggestions on how I can achieve this?  It's the reason I bought this particular machine.

    File > Page Setup = '''Scale'''
    Scale controls the size of what is printed.

  • I need to print from the web. I cant, Why?

    I have the latest version of Firefox. Now I cant print from the web. I need to print Bank and legal documents in PDF format and now since Firefox upgrades itself, I cant print. Why?
    I have to install and use IE. I have not used IE for over 10 years. When are you going to fix this. Can I go back to an older version of Firefox without loosing my Favorites? I use Windows7 Pro, I have a HP printer.
    This is my second time for writing about this problem.

    Worthless. But thanks for taking absolutely no time to understand the initial complaint. Should you decide to do more than a quick forum search, the initial complaint is about a sudden inability to print to PDF. It's is NOT about printer issues.
    But, again, you've already done so much. Don't trouble yourself. You either, Mozilla.

  • I have no Canon toolbar so I can't print from the Web on my printer

    I have a Canon MG5120 multi-printer and when on Firefox the only thing that prints from the web is the time and date border, not the main body of whatever I'm trying to print, like an email or online article. I'm running XP, and I have the Canon toolbar on IE.

    Try to reset the print prefs. See:
    [[Fix printing problems in Firefox]]
    [[How to print websites]]
    Let us know if it helped.

  • When I try to print from the web firefox crashes

    when i try to print from the web firefox crashes

    https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
    Type '''about:crashes''' in the URL bar and hit Enter. <br />
    # Middle-Click the hyperlinks to bring up each Crash Report page in a new Tab; each page may take a few minutes to load.
    # '''Then copy'n'paste the URL of each of those reports into the message box here.'''
    # We'll see if we can help you figure out what is causing those crashes to happen.

  • Firefox crashes when printing from the web.

    Mac user with OS 10.4.11 (Tiger). Have had repeated problems with Firefox in all versions crashing when trying to print from the web or using print preview before printing. Currently have Frefox v3.6.16 for MAC. Am printing to an HP 1315 AIO and HP 1210 AIO printers. Very irritating! Can copy paste web stuff to Word and print OK. Problem went away with OS 10.6 and Firefox 4 on my new MAC.

    Inconclusive Evidence, I have tried all of your recommendations with no success. I can print with any other applications, just not Firefox, so I know it is not a problem with my driver. I'm stuck as to what to do at this point. Any other tips? Thanks for your help!

  • I am using a Pixma MG3222. Print is very small, no matter if I print from the Web or a document.

    I am using a Pixma MG3222. Print is very small, no matter if I print from the Web, PDF or a document using any of the iMac apps.  Also, the Quick Menu does not show any functions in the Print or Manual & Device Information sections. This problem is only on my iMac (OS X 10.8.5). The printer works fine on my PC. For the iMac I have downloaded the Mini Master Setup driver and then the Quick Menu and EZ Photo print software. Can anyone help? I've been at for several days and am beyond frustrated!

    Hi mac,
    We have updated the printer & scanner driver since the Mini Master Setup was posted, please try installing the following listed below from HERE:
    MG3200 series CUPS Printer Driver Ver. 10.84.2.0
    MG3200 series Scanner Driver Ver. 19.0.0a
    Canon IJ Network Tool Ver. 4.2.0 for Intel Mac
     Let us know if the updated drivers resolves your issue. 
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • When I open safari, I get a blank page and the beach ball.

    When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
    I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
    My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet. 
    Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
    Thanks in advance.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • After update to Snow Leopard, I can no longer print from my Mac Book using my HP D110 but can still print from the web

    Hello -
    Earlier this week, I updated my Mac Book to Snow Leopard and am now having printing problems. I have an HP Photosmart D110. I have downloaded and installed the driver update. I have deleted and re-installed the printer. I have run the wireless network test (everything passed). I configured th settings on the HP EPrint website. I have shut down and re-started the computer several times. I checked for software updates.
    The printer is *recognized* on the Mac Book, iPhone and the iPad. It shows up under the SysPref menu. I have been able to print coupons from the Coupons.com app using the iPhone and iPad, but I can't print from the computer itself. The printer icon opens and it indicates the document was sent but nothing comes out. I'm not sure what I'm missing?!

    http://support.apple.com/kb/DL907
    Also try powering the printer off for about 10 minutes.

  • Deskjet F4480: what causes horizontal gaps when printing from the web?

    I just installed a Deskjet F4480 printer. I'm using Windows 7 64-bit.  Printing a word-processing document works just fine - no problems.  Printing from a web page, however, produces horizontal streaks or gaps in the print.  The bottom of some lines is clipped off.  How can I correct this?

    Hi Michael,
    Thanks for the suggestion, I tried USB, Ethernet and FAXing in a document.   All three print with the horizontal gaps.    The funny thing is that the copy (both color and blk/white) print out just fine.     I've run the available maintance functions serveral times, with no improvements.       I wound up purchasing another Canon Printer, because of being a need to print bind.   But would still like to get this one working, as I was very statisfied with it.
    Thanks, Roman...

  • When I print from the web, the print is blue ink, which I don't want and can't read. When I print from Word, it is black ink. What is the problem?

    If I print an article downloaded from the web, it prints in blue ink, which is almost not readable. If I download it to Word or print a document stand alone in Word, it prints in black ink, which is what I want. I didn't have this problem before I upgraded to the new Firefox. Please help.
    Thanks
    Lee Gregg

    I should also point out that when I connect my iPhone, it DOESN'T appear as a connected drive on the desktop. Not sure how this can be so, since the iPhone also has a drive and also functions as an iPod if I want it to. I must have changed some setting to achieve this non-appearance, but don't remember what I must have done.
    What's the secret?

Maybe you are looking for