Cannot print. get message to set up printer instead of printer dialogue box. printer fine with other apps!

Epson R300 and R1900 are both set up and work fine with all other apps including acrobat.
After a restart and attempting to print, instead of the print dialogue box an error message appears saying set up a printer as not properly set up. Further attempts are frustrated by print option in menu greyed out. I have deleted drivers and reinstalled without benefit. If this cannot be sorted I will have to cancel and go back to photoshop 5.
Doug

You need to ask in the forum for the program you are using
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Similar Messages

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

When I try to open a Pages document from iCloud, created on my iPad, I get message stating I need a newer version of Pages. When I go to app store all I get is "installed" when looking at pages app. my Macbook pro is up to date with all updates.

When I try to open a Pages document from iCloud, created on my iPad, I get message stating I need a newer version of Pages. When I go to app store all I get is "installed" when looking at pages app. my Macbook pro is up to date with all updates. Any ideas?

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Using Item UIDRef, can we get data as set in "text on path option" dailog box for each "text on path" item

Hi all,
I have a Item UIDRef but facing a problem for getting data as set in "text on path option" dailog box for each "text on path" item.
What I did:
- Getting the pointer "IMainItemTOPData" using item UIDRef as
InterfacePtr<IMainItemTOPData> mainItemTOPData(shapesUIDRef, UseDefaultIID());
- This interface has the method GetTOPOptionData () which return ITOPOptionsData pointer
- But SDK don't have "ITOPOptionsData" class implementation.
Second Approch:
- Used "ITextOnPathSelectionSuite" and getting the correct result for Desktop plugin.But I want the correct result in server plugin also.
Anyone who has an idea how to get this using UIDRef, please let me know.
Regards,
Jitendra Kumar Singh

Hi Pulse,
Unfortunately, Flex doesn't currently support text on a path. However, I binged it and found this:
http://blog.tsclausing.com/post/49
That might be useful.
-Adam

Trying to update to iTunes 10.5, keep getting message "iTunes has an invalid signature. It will not be installed". Others are also posting this problem but can't seem to find any answers

Trying to update to itunes 10.5, keep getting message "iTunes has an invalid signature. It will not be installed". Others are also posting a similar problem but can't find any answers.

Please can anyone help on this

How do I connect a HP OfficeJet 100 Mobile Printer to my iPad 2? It works fine with other devices in my home, just my iPad says no AirPrint device found and Bluetooth is on on printer

How do I connect a HP OfficeJet 100 Mobile Printer to my iPad 2? It works fine with other devices in my home, just my iPad says no AirPrint device found and Bluetooth is on on printer

Hi @kobgold319,
Welcome to the HP Forums!
I see that you are trying to connect your HP Officejet 100 Mobile Printer - L411a to your Iphone 5. I am happy to look into this for you!
Please take a look through this guide, HP Printer Does Not Support HP's Mobile Printing Solutions. As it will have the answers to your questions.
Hope this guide helps, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

This tech note addresses your problem: iOS: Deactivating iMessage

Every since ios8 my camera is not working with text or with other apps that worked flawlessly before. I just get a black screen when I go to take a photo.

Ever since downloading ios8 onto my 5S the camera isn't cooperating with other apps--messages, Freshbooks in particular. What's up with that? Very frustrating!

MacBook Pro / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better. Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG. However, after much searching, I finally did the steps in order and it worked.
This was after repeatedly downloading Silverlight from the Netflix site without success. So here's what I did:
1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
2. Followed the directions. I felt like such an idiot for not doing it right before.
3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
[also check your Libary/ Internet Plug-ins, but the above search is faster]
4. Drag it all to the trash and empty it.
5. Go back to the Get Silverlight page and click on the Install on that page, not the Netflix site.
6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay!

My Bose Companion 5 speakers are not getting detected in mac pro. They are working fine with other machines (including mac).

My bose companion 5 speakers are not getting detected on Mac Pro. They are working fine with other machines (including friend's mac)

Same Issue here. I had a similar issue with my Bose USB speakers when I upgraded to Maverick. I've had the speakers since 2010 and had no issue with my 2006 Mac Pro or my iMac till the Maverick upgrade, contacted both Apple and Bose with no luck but an Apple update fixed the issue.
I wonder if other USB speakers have an issue or is it just BOSE USB speakers. But my Companions did work fine with my Mac Pro and iMac 27 till the Yosemite update with an initial issue with the Maverick upgrade it was definitely an Apple issue not Bose. I have both Boise Airplay and Blue tooth speakers that seem OK it is only the USB Companions that don't work.
Will look forward to a solution.
Thanks,
Rich

Im tryin to re install os x on my macbook pro i get a pop up saying this apple id has not yet been used with the app store what do i do to get over this hump

im tryin to re install os x on my macbook pro i get a pop up saying this apple id has not yet been used with the app store what do i do to get over this hump

If you can log into the computer, go to the Mac App Store and purchase Mavericks under your AppleID. Even though its free, they still consider it a purchase.
If you are not able to log into your Mac you can try on a different Mac. Once you purchase it, you can stop the download if you want.
Once you do that then you should be able to reinstall via the Recovery HD

HT5364 I installed OX X Moutain Lion and now I have trouble printing pdf documents--get messages like "plug in failed" or "no pages selected on printer" when clearly pages are selected

I installed OS X Mountain Lion on my desktop MAC and since then I cannot print pdf documents---I get messages like "plug in failed" or sometimes "no pages selected on printer" when clearly pages are selected

DO NOT USE PREVIEW TO FILL OUT PDF FORMS, IT WILL DESTROY PDF FILES. Sorry, but I had to shout here to prevent damage to your PDF files.
Here is one of the symptoms when you fill out a PDF form with Preview: If you save it and return it to the author, they will not be able to see the text that you've added to form fields - unless they click on a field, which will reveal the contents of just that field. You can recover from this problem, but Preview will also remove other field types, and will actually rewrite your complete PDF while ignoring what it does not understand. Take a look at this blog post for more information about the damage that Preview will cause: Preview.app - Killer of PDF Files

C309a all-in-one printer gets message: wireless radio is not functioning, contact HP support.

Wireless connectivity lost this morning. Don't know why. When running diagnostics, I get message: The wirelss radio is not functioning. Contact HP support.

My HP C309a had exactly the same problem. Everything I found on the internet said that the printer could not be fixed and the only solution was to buy a new printer. The printer report said the wireless radio was not functioning. A factory reset did not fix the problem either. I had a problem with my HP Pavilion dv6000 laptop with the video graphics IC. The solution for that fix was to do a solder reflow of the graphics IC. Did it and fixed the problem. I figured maybe the same fix would work on my printer as I didn't have anything to lose at this point. I located and removed the wireless radio board in the printer (on the left side upper right corner). I then did a solder reflow on BOTH sides of the board. I put the board back into the printer and wa-la, it connected immediately to the network. It has been functioning with no problems now for at least four weeks now (knock on wood). Hope this helps.

LR5 won't print, it send print job starts to spool then just dissaperes from the print cue? my printer works fine with other software. I can't get any help from Adobe support can anyone help???

Hi i need help! I can't print any jobs, LR5 starts to print then the job disappears from the print cue. I can ! print from other application no problem.
I can't get any support from Adobe. Any ideas would be great.

Hi,
Please try the following steps:
Open the file in Adobe Reader
Click on File menu - Print
In the Print Dialog box, select the Printer and then select Advanced button
In the Advanced print setup, Please check 'Print as Image' (See the Screen shot)
Click Ok and then Click Print.
Let me know if this solves the problem.
~ Aditya Kalania

HT3500 I have a MacBook Pro and an HP ENVY 110 SERIES All-In-One . I can't seem to get a network set up or either one to locate or connect to the other one.

I've spent hours, actually probably days, trying to do this but it's not working. I've had the ENVY since Nov
and have not been able to print - much less do anything else with it.
My internet is CLEAR wireless. I use the little USB 4G Mobil Modem. This new HP ENVY is also wireless.
I know I can't be online and print at the same time unless I get a router.
I also know that I can go offline and change the network pref to "airport" so I can print. Meaning I'll have to change
back and forth but for my uses, that's ok..at least for right now.
What I can't seem to get set-up correctly is my own local network.
I'm pretty sure it's suppose to be done using "Airport".
Obviously, I'm doing something wrong in establishing my network.
The printer is listed on my printer preferences and shown as "offline" "default". I assume that means the ENVY
is my default printer. Great! At least my Pro knows it's suppose to connect to the ENVY once everything's set-up correctly.
Now, if someone could just tell me exactly, step-by-step what to do to get that done....
I'd be soooo very happy!
Thank you!
Ricki

Well... no help was found here.. so I abandoned the wireless- ness of my printer. I bought a
small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
and any kind of printer. I also bought a long USB cable. I now print--wired since this can be done
as an alternative to wireless with this printer. Because I don't want a cable "hanging around"
when the printer is not in use, I simple disconnect it and reconnect when I want to print.
It's a temporary solution others may find helpful as well. Apparently there's been a lot of
confusion and problems getting this printer set up wirelessly with our MacBooks.
Shame on HP for not helping us out!

HT4356 I no longer have the option to share and print. It used to be there but no longer but it is still available with other apps, eg, Pages. Any solution?

I no longer have the option to share and print in Numbers. It used to be there as I have printed from it in the past but it has disappeared! I also use Pages and the option is still there with that app. Does anyone have solution to this?

I really don't understand.
The menu item is available :
Maybe, you didn't activate the tool :
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 23:10:17
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Cannot print. get message to set up printer instead of printer dialogue box. printer fine with other apps!

Similar Messages

Maybe you are looking for