Cannot print since upgrading to Maverick

I have just upgraded to Maverick and my printer stopped printing. I have a HP 8600 Pro Office Jet. The printer is running low on ink but will print from Windows and also from the mac when printing a test page. When I try and print an email for example it goes to the print queue but will not actually print. There is a warning the ink is low (but not an error). Could it be the ink level even though a test page works fine or are there other likely problems.
Thanks
Ron

I have an HP Laserjet 3055 All-in-One Printer and am experiencing the same problem. It has been printing just fine from my iMac running OS 10.9.5 (Mavericks) until after the HP Printer Software Update, Version 3.0, that I installed on 1 Oct 2014. Although the 3055 is shown as connected/idle to my iMac via USB, after clicking "PRINT" for a document, the print queue status soon changes from "printing" to "waiting for printer to become available", and the printer never becomes available. I have tried rebooting everything (printer, computer, Word software), checking USB cable connections and changing USB ports, deleting and re-adding the 3055 printer (numerous times!) even after resetting the print system, but could there be something inherently wrong with the latest HP driver (version 19.9 for HP Laserjet 3052)? Or is it possible something else is going on?  In other words, I have exhausted all the solutions I've found in these and other forums to no avail.
I have tested this printer by connecting it to my MacBook Pro also running OX 10.9.5 but without the HP Printer Software Update, Version 3.0. (Hadn't gotten around to this update...) The printer works fine, even though the driver has the same version number--19.9. So could the version 19.9 driver in the latest HP Printer Software Update be corrupted? Is there any way to reinstall that driver? Or copy the 19.9 driver from my MacBook Pro and install it on the iMac? HP only refers to the Apple Software Update process for Mavericks compatible drivers for this printer. Can I manually uninstall the HP driver for the Laserjet 3055 from my iMac and then have the iMac download the driver again in the process of re-setting up the 3055? Any suggestions appreciated.

Similar Messages

  • Cannot print to Canon LBP 3360 since upgrading to Mavericks

    I cannot print to my Canon LBP 3360 since upgrading to Mavericks.  Would anyone know of a work around for this.  Canon is not making any promises about upgrading the driver.

    Canon Australia seems to have resolved this issue for all UFR II/UFRII LT printers .  Ooof !
    http://support-au.canon.com.au/contents/AU/EN/0100491502.html

  • Since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

    since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

    Hopefully this is what you are looking for: 
    Canon MP560 series:
      Status: Idle
      Print Server: Local
      Driver Version: 10.84.2.0
      Default: Yes
      Shared: Yes
      URI: usb://Canon/MP560%20series?serial=254057
      PPD: Canon MP560 series
      PPD File Version: 10.84.2.0
      PostScript Version: (3010.000) 705
      CUPS Version: 1.7.2 (cups-372.4)
      Scanning support: Yes
      Scanning app (bundleID path): -
      Scanning app version: -
      Scanner UUID: 00000000-0000-0000-0000-323534303537
      Printer Commands: PrintSelfTestPage ReportLevels
      CUPS filters:
    Raster2CanonIJ:
      Path: /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
    Hope

  • Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

    Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

    Open Finder and click on Go > Go to Folder. Then type
    /Library/Printers/Canon
    and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

  • Unable to print with HP Color LaserJet 2605dn since Upgrading to Mavericks

    Since upgrading to Mavericks, I've had nothing but problems printing to my HP Color Laserjet 2605dn.
    I'm having this problem on both my iMac and my MacBook Pro.
    I get errors like:
    "unable to write pirnt data broken pipe"
    "unable to send data to printer"
    "printer not connected"
    I've been reading responses to others with similiar issues and I've tried
    deleting and re-adding my printer.
    reseting my printing system
    Installing Guenprint.
    re-adding my pirnter with a generic PCL driver.
    None seem to correct the problem.
    This problem happens both when connected directoy with USB and when connected through the network.
    I have no problem printing with my work (Wondows) laptop.
    Any help would be appreciated.

    Thanks, a brody.
    Yesterday (before I read your response), I downloaded the latest firmware (20140413.) (What do they say about great minds?)
    I thought the issue may have been resolved.
    I was finally able to print my bank statement on both the iMac and MacBook.
    Today, I'm back to the the same issues.
    Very frustrating, even though I've had the printer for five years, I've printed less than 20,000 pages.
    In my mind, it's pointing more and more towards a hardware issue.

  • Since upgrading to Maverick I cannot send/share photos through iPhoto. Dropbox says "not connected to server". All other online email activities work just fine.

    Since upgrading to Maverick I cannot send photos while in iPhoto.  Dropbox says I am not connected to server.
    All other internet email activities work just fine.

    And again why do you think Dropbox is involved in any way?  There is no connection of any sort between iPhoto and Dropbox
    THis sounds like you either need to (my personal suggestion) change your email client to Mail in the iPhoto preferenceemail if you want to use the iPhoto client under the accounts tab delete your account and re-enter it
    Ln

  • Trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks

    trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks, what do I need to do please ?

    You're right. It wasn't QuickTime itself. I solved all the problems myself.
    The main reason why QuickTime files weren't working was because the newest audio driver from Creative released July 2007 (using their autoupdate) is apparently for Windows Vista (it has the name Vista in the update title). Why that update showed up on my Windows XP Pro system, I have no idea. So, I went to Creative's site and got the driver before the latest release, and all works well.
    The Microsoft update (from June 2007, I noticed today, not July) is another issue. It's based around the file P17RunE.dll, which is something from Microsoft for the SoundBlaster. Not sure what it does, but I don't need it.
    Sorry for wasting all your time on a non QuickTime issue, but thanks for the help.

  • Since upgrading to mavericks my applications crash when i try to use the print dialogue

    since upgrading to mavericks my applications crash when i try to use the print dialogue

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

  • Since upgrading to Maverick, I cannot back up my computer to WD My Passport Studio external hard drive. How do I do it?

    Since upgrading to Maverick, I cannot back up my computer to WD My Passport Studio. How do I do it?

    Have you checked with WD technical support?
    Ciao.
    This discussion may enlighten you:
    http://https://discussions.apple.com/message/23943103#23943103#23943103
    It appears it is a WD software issue.
    Message was edited by: OGELTHORPE

  • Cannot Access Disks on Time Capsule Since Upgrading to Mavericks

    Hey folks...
    So I've had this set up for several years, and it's worked out well. I have a time capsule with an external (self-powered) harddrive connected to it via USB. I usually access it via ethernet as the connection is more speedy than wifi, and my laptop generally remains stationary. For what it's worth, I'm using a Macbook Pro (mid-2010), with the original time capsule (500gb) as well as a connected Western Digital (1tb) external harddrive.
    Since upgrading to Mavericks, however, I have not been able to consistently access the remote disks, either by wifi or ethernet connection.  The time capsule shows up under my "shared" section of the finder window, but the drives (which are usually visible and accessible from within the time capsule) are not there. Strange enough, when I go into my Airport Utility for Time Capsule preferences, the disks are visible under the "disks" section.
    The time capsules' firmware is up to date, as well as the laptop's. I have tried reseting the time capsule as well as my computer in addition to simply unplugging/plugging it back in. I was able to access the disks on a fluke once in the last few days, but after moving the computer away from it's standard spot, the disks are once again no longer accessible.
    I had Server 2.0 but am unable to use it since upgrading the OS and haven't purchased Server 3.0. Any suggestions for solutions? Could residule configurations having to do with the Server functionality be affecting it? I'm guessing it is something to do with Mavericks.  Thanks for any help or feedback.
    Mitchel

    I don't have a guaranteed solution to your problem, just some suggestions:
    1) Try powering down the Time Capsule for at least 15 minutes, then plug it in again and see if it works better.
    2) If you suspect that heat might be a problem, try raising the Time Capsule to give better air flow below it.  I have mine on an inverted plastic-coated-wire basket of the type used to organize kitchen drawers.
    3) If AirPort Utility can "see" the Time Capsule, you should be able to use the "archive" function (in the Disks panel, Disks tab) to write the disk's contents to a drive connected to the Time Capsule's USB port.
    4) In the worst case, you should be able to access the files on the Time Capsule's disk by opening up the Time Capsule, removing the disk drive, mounting the drive in an external enclosure, and attaching the enclosure to your Mac.

  • Cannot print on usb after maverick upgrade

    cannot print on usb after maverick upgrade

    Chef jonathan wrote:
    apple when will I beable to print? 
    These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.
    Apple involvement. Apple may respond to questions but does not formally provide technical support on the Site. Any information that is provided by Apple or Apple employees is offered on an "AS IS" basis without warranties of any kind.
    Ask your question in the Product Feedback area.  Otherwise............... 
    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
    CLICKY CLICK-----> Help us to help you on these forums
    ***This will help in providing you with the proper and/or correct solutions.***

  • Can't access Time Machine files since upgrading to Mavericks

    I have searched the community and found that people have experienced issues backing up to Time Machine since upgrading to Mavericks, but my problem appears slightly different from the ones I've found.  I can see that my Time Machine is actually backing up since the upgrade as it was before the upgrade.  The issue I'm having is that I can't access the backed-up files in any way. 
    When I try to open time machine it launches the "space view" with all of the historical tabs lined up for me to scroll through, but imediately closes that window and gives the error message: "Can't connect to a current Time Machine backup disc".  It's so weird, because it says that there have been backups completed since the upgrade (most recently this morning).  If it wasn't writing to the disc, it would have showed me an error of some sort.
    What I am, specifically, trying to accomplish is that I need to restore some iTunes playlists that I somehow managed to delete this past weekend.  I figured that I would easily be able to access the library file that contains the playlists from Saturday morning, when I KNOW that playlist was still there, and just restore it.  Now that I am seeing that I can't access any of my time machine files, I'm realizing that I have an even bigger problem, and that all of my files are, essentially, going without backup at this time (assuming I can't access the files that have already been backing up).
    If anyone has some insight as to how I can fix this problem, I would greatly appreciate it.

    Hi John, (The above was for your attention) I'm 72 and must've hit the wrong button!!!
    I followed your instructions to the letter, but sadly, no success...all my backups are showing on the TM external HD, but I cannot access them after instsalling 'Mavericks'
    I spent the entire day on and off the phone with Applecare (they are very nice, and I'm sure they know most of the stuff needed; but not this problem. They are phoning back tomorrow as the senior chap was not available.
    I love my apple products, and like you, have been using their gear for well over 25 years...not studying the things, but using them all the way through.
    My present Mac,  a 24" iMac is nearly 7 years old, bought on December 11th 2007, and this is the first time I have had a significant problem, and never a virus..got bless em!. I bet there are not many Windows users around who can say the same!
    However, if I cannot access my backups, I'm a bit lost, as all my accumulated stuff is there!
    I guess the worst case scenario is that I revert to OS X 10.7.5, and wait 'til the bugs are ironed out in Mavericks....Ho Hum
    Message was edited by: briinoz

  • Can no longer print since upgrading modem.

    can no longer print since upgrading modem.  none of our apple devices see the HP printer anymore.  they used to.  says no airprint printers found.  any thoughts on how to fix?

    If you upgraded the modem......but you have not reset the printer back to its original default settings and then set it up again......now would be a good time to do this.
    The printer still has the programmed settings to connect to your old modem, and it cannot find it, because it is no longer there. The printer is lost, and does not know how to find its way. It needs to be set up again with new settings to match your new modem.

  • AFP won't connect since upgrading to Mavericks

    Since upgrading to Mavericks I cannot connect to my QNAP TS-210 via AFP; this means my Time Machine can no longer find my backup disk and no longer works. Anyone else having similar issues?
    I have tried the usual quick fixes:
    Firmware is up to date
    All OS updates installed
    Server reset
    DHCP renewed
    DHCP switched to try manual setup
    IP changed on server and Mac
    It's odd as when connecting to server I can enter my login ID and it seems to be validating it ok but then doesnt connect to the server at all?
    Any suggestions welcome!

    Use a supported Time Machine configuration.
    OS X Mountain Lion: Disks you can use with Time Machine
    "Note: Some AFP disks from manufacturers other than Apple don’t support Time Machine. If your network uses an AFP disk, but the disk doesn’t appear in the list of devices available for Time Machine backups, contact the disk’s manufacturer."
    Your complaint is very common with NAS devices. Some work and some don't. If they appear to work, they may fail upon attempting to restore from the backup, or they may fail every time Apple updates OS X. Given the goal of a backup strategy, using anything other than a supported TM configuration is not an option.

  • Problems downloading movies since upgrading to mavericks

    Ever since upgrading to mavericks when it was first released, I have had nothing but problems downloading movies in iTunes. What normally would take no more than 30 minutes to download a movie and iTunes extras has now turned into waiting more than 3 hours with no less than 4 error messages saying iTunes cannot download the movie and I have to relaunch iTunes or reboot my entire system. It is getting quite annoying and I can't seem to find a solution.
    Any help would be greatly appreciated.
    Thank you in advance.

    I upgraded to Mavericks on two computers and have display problems too! I have CC on one Macbook Pro (2011) and CS6 on another (2012) and I'm now almost positive my display problems are triggered by InDesign. I don't have to be doing anything special, and I don't have to be working in InDesign at the time, but InDesign has to be open and I get things like this:
    Once it turns magenta or green, that's when I have to boot the system. I can still work with the glitchy display before it turns colors and if I'm still able to quit InDesign while it's glitching, the display goes back to normal. Same on both computers and the 2011 one has a new logic board in it.
    At first I thought it had something to do with connecting my hard drive or my external display, but the display issues happened with both computers with nothing hooked up. Those are ruled out now. I took my 2012 computer to Apple and they told me it was a software issue and all my hardware is ok. Obviously they didn't fix the software issue because it's still happening.
    This is not normal and needs to be fixed soon!

Maybe you are looking for