Cannot print to a Windows network printer

Hey guys,
This is my first post here, so hello to all the users here and most of all to ones that are willing to help me out
I have bought an iMac G5 (PowerPC not MacIntel) and upgraded to 10.4.6 (I plan to update it to 10.4.8) for all the bugfixes etc.
I have connected my Mac to a Windows Domain successfuly and have also installed a network printer (Kyocera FS 1750) too, without any problems.
The thing is that when I try to print using Mail or Safari, or AppleWorks or even Microsoft Office for Mac the Print window pops up but when I try to print pushing the Print button nothing happens. The print window stays there and it doesn't print anything. I have the print logs opened while I try to print so I can see if there is any error, but it doesn't write anything in the log because it doesn't even try to print!
There is a giant BUT however! While it doesn't print using the applications I mentioned above it does print using iPhoto or Preview applications... What is going on here guys? I tried using other drivers but still nothing, the problem remains.
Anyone has a solution? Sorry for my Grammar, English are not my native language so bear with me
iMac G5 Mac OS X (10.4.6)

I have Xerox M118 Network Printer. The driver available on the internet does not support the "Auditron" feature that it has. I need a driver to run this printer.

Similar Messages

  • Printing to a Windows Network printer after 10.4.9 upgrade

    Very desperate with this. We have a couple macs at the office and after a move and some software updates all cannot print via a Windows network printer.
    Unable to connect to SAMBA host is the only error we receive.
    I checked my smb:\\ syntax, I have tried IP address, tried picking from the list (which by the way the printers do show up yet you cannot print to them)
    Extremely frustrating and with an Anti-Mac IT director this gives him more ammo to say Macs are irrelavant in the workplace.
    The Macs are bound to Windows Active Directory and the users are Active Directory users. We do not have a Mac OS X server. Our printer server is Windows 2003 SP1, the printers range from an HP LaserJet 4100 to a Xerox WorkCentre 24, all do not work.
    The ONLY network printer that appears to work is the printer associated during the login
    Curious if anyone with 10.4.7 and higher have problems....

    More info...here is the cups/error log when trying to print from a newly added Windows network printer...looking for some help on this....
    I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox device-uri to "smb://HOPE/fps2.projecthope.org/FPS2-Color Xerox" (was "file:/dev/null".)
    I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-is-accepting-jobs to 1 (was 0.)
    I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-state to 3 (was 5.)
    I [22/May/2007:12:22:45 -0400] Saving printers.conf...
    I [22/May/2007:12:22:45 -0400] New printer 'FPS2ColorXerox' added by ''.
    I [22/May/2007:12:23:05 -0400] Saving printers.conf...
    I [22/May/2007:12:23:05 -0400] Printer 'FPS2ColorXerox' modified by ''.
    I [22/May/2007:12:23:16 -0400] Saving printers.conf...
    I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
    I [22/May/2007:12:23:16 -0400] Saving printers.conf...
    I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
    I [22/May/2007:12:23:20 -0400] Saving printers.conf...
    I [22/May/2007:12:23:20 -0400] Printer 'FPS2ColorXerox' modified by ''.
    I [22/May/2007:12:23:37 -0400] Adding start banner page "none" to job 5.
    I [22/May/2007:12:23:37 -0400] Adding end banner page "none" to job 5.
    I [22/May/2007:12:23:37 -0400] Job 5 queued on 'FPS2ColorXerox' by 'js721'.
    I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/cgpdftops (PID 6183) for job 5.
    I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/pstops (PID 6184) for job 5.
    I [22/May/2007:12:23:37 -0400] Started filter /Library/Printers/Xerox/filter/XeroxWCPFilter (PID 6185) for job 5.
    I [22/May/2007:12:23:37 -0400] Started backend /usr/libexec/cups/backend/smb (PID 6186) for job 5.
    E [22/May/2007:12:23:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME
    E [22/May/2007:12:23:39 -0400] [Job 5] Unable to connect to SAMBA host, will retry in 60 seconds...DEBUG: Page = 612x792; 11,11 to 601,781
    E [22/May/2007:12:24:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME

  • Printing to my Windows Networked Printer from my MacBook

    Let me apologize upfront, I'm new the world of Apple, just coming over from the PC world and so these will surely be stupid questions.
    I just got a new MacBook (which I LOVE!!!)
    I have a Desktop PC running XP
    I have an HP OfficeJet G85 connected by USB to that desktop PC
    I have a wireless netgear 802.11b/g router
    WHAT I WANT TO DO: I want to print wirelessly from my MacBook to the HP OfficeJet G85 (as I have been able to do with several PC notebook computers...so I know everything is configured right on that end of things). Specifically, I want to be able to take advantage of the double-sided printing duplexer when printing wirelessly from my MacBook.
    WHAT I CAN DO:
    -I've been able to plug the printer in via USB to the MacBook and install it. (but that's not wireless)
    -I've been able to print wirelessly using CUPS and a SAMBA server, which I DO NOT understand but found some website that told me how to set it up. BUT when using New DeskJet Series CUPS v1.1, if I attempt to do double-sided printing, it causes an error on my printer that halts printing and requires it to be restarted; plus, this give me pretty crummy quality printing.
    WHAT I CANNOT DO:
    -Locate the darn correct print driver file on my MacBook (I know it's there because I installed it as part of the all-in-one software I downloaded from HP and because I was able to install the printer via USB; but when I look at the list of printer drivers, my printer is never on that list AND because I don't know what the driver's name or file extension or location would be on a Mac, I can't hunt it down myself, eventhough the Mac is willing to let me try to).
    -In leu of using HP's specific G85 print driver (which I feel I should be able to do...you'd think their setup assistant software would help, but it doesn't let you navigate through your network to direct it to your printer...if its scan doesn't see it, then it's no help), based on what I've read, my other options are:
    --Buy an HP JetExpress Print Server (too expensive) or Airport Express (which probably won't support this printer or help my situation...am I correct about this???)
    --Use this hpijs ppd thing(from http://openprinting.org/showprinter.cgi?recnum=HP-OfficeJetG85)...assuming all of my conclusions and assumptions above are correct, this is what I need to do...the only thing is I don't understand what it is or what I'm supposed to do with it. After I download the PPD, do I need to download or run something else that uses this PPD file? Am I supposed to put it in a particular folder? I've downloaded the HP-OfficeJet_G85-hpijs.ppd file to my Mac's desktop...what do I do now?
    Thanks in advance for any help you guys can offer!
    Jeff

    Jeffry,
    Have you had any luck? I purchased a macbook and apple care can't help me figuire it out. My situation is pretty close to yours and I've been following your post but looks like no help. Please send me an e-mail if you have figuired how to print over your network.
    Thanks
    Allen Hilder

  • Macbook Pro not printing to Windows network printer

    Hello,
    Recently purchased Macbook Pro Mac OS 10.7.2 Lion and I am unable to print to a windows network printer.
    When I click the print button nothing happens. I have tried to print from Safari, Word, Excel etc and nothing happens.
    The printer is added and showing as idle. ( I am able to print to the printer from my own Windows 7 PC).
    I have reset the printer settings and re-added but the issue remains.
    Both the printer and Macbook are connected to the network.
    Has anyone any suggestions please?.
    Thanks,
    Frank

    . are you using the right driver? try checking with HP if they have a driver that is compatible with lion.
    http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?taskId=135&cc=u s&lang=en&prodSeriesId=3690646&prodTypeId=18972

  • Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

    Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
    My Mac runs lion and the windows desktop runs Windows XP
    I have tried for a few hours or so to connect my mac to this printer over a home network.
    For your information it does work when connected directly to my mac using a USB Cable.
    If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

    In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

  • CUPS won't allow printing in a Windows network

    I just spent five days trying to get printing working in my OSX 10.9.2 (iMac). Here's the thing: the printing network is a Windows smb network. Everything works fine on my MacBook OSX 10.9.2. I can manually install the smb://xxxx/yy printer and it works just fine there. So what's wrong with my iMac? I have no idea, but this is what happened. First I tried installing through Printers & Scanners / Advanced. And it worked fine on OSX 10.9. I used guest/guest credentials for the Windows network printer when asked.
    But after upgrading to 10.9.2 it stopped working. The queue window says Ready to print and refresh or Resume does nothing. In the error log it says "ERROR: error in CUPS Filter - : Broken pipe". And also there are possibly problems with authentication.
    Then I tried installing the printer through the CUPS web interface. Had weird problems with it, as it's very hard to control users and authentication. At one point I thought I had cracked it, I was able to print with my Windows network credentials. But the next print did not work anymore. I had to uninstall the printer and install again to get just one print. After trying to set users right with different sudo commands I am now at point where I can't even get one print through.
    What can I try? I have done Reset many times from Printers & Scanners, no difference. What does the broken pipe mean? And how to set the printing CUPS user to what I want (it needs to be different than my OSX user or "root")?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ cups ▹ error_log
    from the hierarchical list on the left side of the Console window. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.

  • Printing to a windows shared printer (Epson  Photo 1400) on a AD Network

    Looking for help with printing to a windows shared printer but I believe I need instructions for a domain rather than a workgroups??? Trying to print to a windows shared Epson Stylus Photo 1400 from a Mac running OS 10.4.11. Sharing works fine to other PC's an a network using active directory. (there is no workgroup, and I guess there can't be in the way the network is administered) The "address" used on another pc to print to the shared printer is \\111408nw.

    Hi dlori, and a warm welcome to the forums!
    I think these may help...
    http://discussions.apple.com/thread.jspa?messageID=4776616
    http://blog.case.edu/djc6/2005/06/22/printingfrom_os_x_104_to_windows_printer_on_activedirectory
    http://www.afp548.com/article.php?story=20070108171607985

  • MacBook to print on a windows network

    I have proceeded with the install process to enable my mac to print to my windows network. However, when I attempt to give my username and password, nothing works. "Administrator" or my XP login will be accepted. Are there settings on the XP machine that need to be revised? Any assistance is appreciated.

    The apple link I provided above has the same procedure it is: http://docs.info.apple.com/article.html?artnum=301397 I would like to know why following the regular install method does not work for a lot of people. It will not authenticate unless you provide the IP user name and password in the advanced manual way. It is easy enough to do it manually with good instructions. The people helping need to be careful, they all seem to post the first iFelix site and do no get that it is the authentication that is messed up. I searched this site and many others and people just don't get that some of us for what ever reason have to use smb and install the user name and password manually. It almost drove me nuts. BDAqua helped me figure out the smb protocol on the networking thread.
    mark

  • HT3049 Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

    Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

    If I run the following (on the machine I'm trying to set up the share)
    smbclient -L localhost -U%
    I got the following output
    Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
    so I thought it might be something incorrect with the iptables side of things, however I haven't really touched that at all and it seems to look correct
    iptables -nvL
    Chain INPUT (policy ACCEPT 667 packets, 79977 bytes)
    pkts bytes target prot opt in out source destination
    Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
    pkts bytes target prot opt in out source destination
    Chain OUTPUT (policy ACCEPT 157 packets, 20724 bytes)
    pkts bytes target prot opt in out source destination
    So from my (very little) knowledge this appears correct (I think)... However it appears that something is blocking access somewhere.

  • How do I print from an iPad to a windows network printer?

    How do I print from an iPad 2 to a windows network printer (without AirPrint)?

    Thx for the suggestion, but it defeats the purpose by having to have my desktop computer running. I am looking for an app or hardware device that will allow me to print directly from my Ipad to my printers without having to turn on a computer to do it.
    I have tried the Lantronix xprint server and while it works with my older Brother Laser it does not work with my newer Kodak ESP Office 6150 (and it doesn't look like they are even interested in attempting to write support for it into their printer list)
    I have tried every app in the app store and none of them do the job WITHOUT having to have a computer running on the network.
    Let me re-state the problem...
    I want to print from either my Iphone 4  or my original version Ipad to my network attached printers without having to have a computer running on the network to do it. I have a Brother HL-5150D laser printer hooked to my apple airport extreme's usb port and a Kodak ESP Office 6150 connected to the network via WiFi. How can I do this.

  • My Windows network printer continues to show as being paused, how do i fix this

    I have had my MacBook Pro since July and it has worked like a "PRO". But a week ago the printer on my Windows Network begin showing up as "paused" when I tried to print to it, and it will not "come off of paused" no matter what I try. I have added nothing or changed nothing since I began using both the printer or the laptop back in July.
    Does anyone have any ideas as to what may have happened or how to fix this? I have already uninstalled the printer and reinstalled it but it quickly returns to showing up as paused.

    Extras --> Folder Options or File --> Oganize depending on whether or not you hide the menu in Windows Explorer, then pick the File Associations tab.
    Mylenium

  • How do I make my HP P2055dn printer into a wireless network printer for 5 computers

    How do I make my HP P2055dn printer into a wireless network printer for 5 computers? Windows versions on computers used are  XP,Vista & 7.
    Thanks
    Leon

    Unplug the USB cable from the printer.  Plug your printer into your wireless router with an Ethernet cable.
    Next, on each computer, get the latest software for your printer from the "Support & Drivers" link at the top of this page.  Install it and select "Network" installation when it asks.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printing from iPad - Why do I need third party app to print to a local network printer??

    Why do I need to pay for a third party app to print to ALL local network printer?? I understand that only some printers are compatable with iPads, but yet application like "iCanPrint" allow me to print just fine to a printer connected to my network. Why can't Apple include this as one of its features? Technology is apparently there?

    For that, and the many other apps to work, you need to be running a pc or Mac on the network.  The answer is drivers.  Every printer in the world needs a driver.  There simply is not enough space on a pad to load every possible printer driver that might be in play.  in the pc world, the operating system comes preloaded with hundreds of common drivers, and when you buy and install a new printer, you download the new drivers for that new printer.
    That all just will not work on a pad or phone.  So apple flipped the issue upside down, and said...'here is the printer driver we will make standard for its devices.  We call it AirPrint.  Include this in your printer'.    A lot of manufacturers have, and more printers are enabled each month.   
    So your choice is pretty basic.  You can buy an AirPrint enabled printer and print directly to it, or buy a non AirPrint printer, or use the one you have, and rely on your pc to act as the translation device to manage the print job.

  • Can't print .pdf files on windows network printer

    Hi,
    I cannot print .pdf files on Canon IRC printer with UFR II 2.23 or 2.24 drivers connected through a windows network by LDP protocol, either with Apple Preview or Acrobat Reader - looks like the software doesn't find the printer (I have the rainbow whell and the software does not answer). It can last for hours, there is no other solution than forcing the soft to quit and finding another way to print. I have updated Canon drivers from 2.23 to 2.24 (all supposed to work with Lion) and that does not fix the problem.
    This problem does not happen with Ms Word or Safari (or, more generally, other types of files) and it worked fine with Snow Leo even with pdf!! I also have windows XP with Parallels and guess what? I can print through Parallels with Acrobat Reader (for windows XP) on the same printer on which I cannot print with my Mac with Lion and Preview or Acrobat Reader for Mac!
    Please help !!
    Alexis

    Correction
    It works with Acrobat but the printer does not like queues of documents...
    The site privided me with the topics I fas looking for about this : it's a Canon drivers and Lion permissions problem.

  • Printer disconects from windows networking with Client32

    Hi,
    I have a printer attached to a Windows 2000 box. It is shared with windows
    networking.
    I have a remote client that cannot see the shared printer while the IPX
    protocol is loadaed.
    I unsintall the Novell client, remove the IPX protocol and the printer is
    there.
    If I reinstall the client, the connection to the printer is lost
    Any Idea what may be wrong ??
    I tried installing the client only with IPX and IPX/ip and nothing works
    Thanks in advance,
    ernesto Fox

    It is most likely an MS Browser issue.
    How is the MS Client configured? IP? IPX? Does the network involve
    routers?
    We are really moving beyond NW Issues, but I suspect that Different PCs are
    becoming master browswer and generating different lists of MS Network
    resources.
    While potentionally not the most efficient design, you may want to ensure
    that IPX is loaded for all of the MS Clients, that the IPX frame-type if
    forced on all of the PCs. etc....
    Now that recommendation would be to ensure easy browsing of MS resources in
    a simple network.
    If you can get your hands on some free LPD software for setting up LPR
    printers on your Windows 2000 this would be very easy.
    W2K ships with the ability to print to LPR but not host LPR printers. XP
    comes with both I believe.
    http://www.winsite.com/bin/Info?12500000037640 is a free copy or LPD
    software.
    <[email protected]> wrote in message
    news:[email protected]...
    > Yes, Im running Zenworks 2.0 but the strange thing is that it worked for
    > a time without any problem.
    >
    > Suddenly, it cannot see the printer any more. I tried sending to the IP
    > but didnt work
    >
    > I came early today, and everything was fine.No one on the LAN except me.
    > Do you think that too much traffic on the LAN may be affecting the
    > connection in this way ??
    >
    > The user didn't call me so far...
    >
    > I printed for years with Novell and never had an issue. The problem is
    > that NPRINTER doesn't for w2k.
    >
    >
    >
    > Thanks for your help.
    >
    > Ernesto
    >
    >> Are you running ZENworks? Perhaps this client is pushing down some type
    > of
    >> Policy prohibiting printer sharing?
    >> Can the remote client still see the Workstation in network neighborhood?
    >> What happens if you install the Client w/o IPX support on the PC?
    >>
    >> What happens if the remote client enters
    > \\IPADDRESSOF95PCWITHSHAREDPRINTER
    >>
    >> If he can see it then something may be up with your browser elections.
    >>
    >> <[email protected]> wrote in message
    >> news:[email protected]...
    >> > Hi,
    >> >
    >> > I have a printer attached to a Windows 2000 box. It is shared with
    > windows
    >> > networking.
    >> >
    >> > I have a remote client that cannot see the shared printer while the IPX
    >> > protocol is loadaed.
    >> >
    >> > I unsintall the Novell client, remove the IPX protocol and the printer
    > is
    >> > there.
    >> >
    >> > If I reinstall the client, the connection to the printer is lost
    >> >
    >> > Any Idea what may be wrong ??
    >> >
    >> > I tried installing the client only with IPX and IPX/ip and nothing
    > works
    >> >
    >> > Thanks in advance,
    >> >
    >> > ernesto Fox
    >>
    >>
    >

Maybe you are looking for