Cannot print to hp c7180 all-in-one using eprint from my ipad2

Just installed hp eprint on my iPad 2 and when I try to print eprint finds a number of printers but not the one on my home network which is a hp photos art c7180 all-in-one.
This question was solved.
View Solution.

Hey there. Unfortunately the C7189 does not support ePrint (if I am remembering correctly). Sorry about that!
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

Cannot print to psc 1210v all-in-one from users

Only the administrator login is able to print to the psc 1210v, in Windows XP MCE. When regular user tries to print to the psc 1210v, the print job appears in the printer que, but shortly just disappears.

How I resolved the issue was to change other "User" account type, temporarily to "Administrator" and updated the printer driver from within Device Manager. I also changed, within Windows Group Policy Editor (gpedit.msc), the Load/Unload Device Drivers permissions (Computer Configuration > Windows Settings > Security Settings > Local Policies > User Rights Assignment) to include "Users" group rights, in hope this will resolve this problem again in the future.
I think that, because this Group Policy setting was restricted to Administrators group that it prevented the USB printer driver from installing properly in anyone's login that is part of the Users group. So, though the HP all-in-one software was installed for all users, the USB drivers were not. I found this by clicking on the printer driver "Details" from a "Users" login, from within Device Manager, which stated that no drivers were installed or found.

Installed a new harddrive in my macbook pro. cannot connect to hp photosmart all in one printer!!

I, recently, installed a new hard drive on my MacBook Pro Laptop Computer (2007 model).
Now, I cannot print out anything on my HP Photosmart C7180 All-In-One Printer! They don't
seem to be connected, as the printer icon shows up on my computer, and then, immediately, evaporates
into thin air.
How do I connect my HP Printer to my laptop, now that I have a new harddrive installed?

Hello Lady22:
When you received your printer you should have received two insulation disks one is for Windows computers and the other one is for Mac ( Apple Computer) If you have the disks please install Mac disk. Apple computers do search and down load the parcel software so you can do basic printing commands. You need to find the program that is some where in your computer that allows you to hook up Pinters and Devices. Ounce you find this open it up then connect the printer cable to the lap top. The computer program will list HP's printers yuo need to select your printers model number. Then it will down load the drivers for it to run basic commands. Ounce they are download run a test to make sure it is working right. Contact HP's store and asked them to send you a new set of insulation disk. Your old disk may have fine dust film on them. Clean them off pior to inserting them If you use glass cleaner and fine cloth make sure they are dry off before you insert them. If you used them before maybe a speck of dirt blocked out parcel program that caused it not to install correctly . frrw

NOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

CANNOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

Hi,
I think you need to remove the queue. Please try:
    hold down the Windows key and press R.
    from the Run window, type services.msc and hit enter.
    if the machine asks for Admin you have to accept this,
    look down to the print spooler service, right click it and select properties
    click on the Stop button,
    browse to C:\Windows\System32\Spool\printers
    delete the job inside this folder
    reboot the machine
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My printer, hp photosmart c4200 all-in-one is stuck in scan mode

My HP printer--HP Photosmart C4200 All-in-One is stuck in scan mode. I have tried holding start button 60 sec, unplug from power supply, hold while I plug back in with no luck.

Hi @Bungybill,
Welcome to the HP Forums!
I understand that you cannot copy or scan with your HP Photosmart 3110 on Mac. I am happy to help!
For further assistance, I will need to know:
The version number of the Mac Operating System. To find the exact version, visit this link. Whatsmyos.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you make a copy, and lift the lid, do you see a light come on and the scanner bar move?
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How can I print to hp photosmart all in one 7280 from ipad

How can I print to hp photosmart all in one 7280 from ipad
This question was solved.
View Solution.

Hi,
Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
you may find the steps to get and use the app in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

The Photosmart 5510 is AirPrint capable. You can find that information linked below. There may be something in the network that is preventing communication. To use AirPrint your router needs to support Bonjour services. Run the download below. It will let you test Bonjour services from your Windows PC. If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour. Let me know what the app finds. If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
Bonjour Print Services for Windows v2.0.2
HP Web Connected Printers and Supported Cloud Services
I am a printer tech for HP.

Where is the print button on my all in one

where is the print button on my all in one pc i cant see it at the top of the page

Hi,
Hundreds of AIO models are out there, what is the model of your printer ? Where do you print from: from its card reader of from a computer ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT4356 I have an air-print enabled printer: HP Premium e-all-in-one C310. Can't print from iPad iOS6. They're on the same network, but have different IP addresses. On the iPad it's 192.16.1.126 and on my printer it's 192.168.1.133. Can I match them? H

I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310). They're on the same network, but have differed IP addresses! The iPad IP is 192-168-1.126 and the printer is 192-168.1.133. That's the only difference I can see. Is there a way to fix this?

fyi:
you put periods between the numbers.
Each device needs a unique number.
for the 192.168.1 the right must number should vary. 192.168.1.x
the numbers you have look ok.
Power off all devices: wifi router, printer, ipad.. wait 10 minutes. poweron router ... wait power on printer wait then power on ipad.
cross fingers.
Robert

How can I print from my ipad2 to my hp6210 all in one using printopia...I can see the list on my ipad2, I select the printer and say print but nothing happens.

How can I print from my ipad2 to my hp 6210 all in one using printopia? I see my printer on my iPad, I select it and say print and nothing happens. The printer is connected to an older Mac with OS X 10.4.11 but I do have an imac in another room. I have trouble printing from the iMac to this printer also even tho share is on but the printer works fine with the old Mac it's connected to. My iPad has the latest iOS.

A few things to consider.
The computer Printopia is loaded on must be powered on and must be able to print on the printer that is being shared. If the iMac is having problems printing to the printer it could indicate a problem with the share setup.

Why wont' my Iphone 4 print to hp 4500 all in one?

I downloaded the Hp home&biz app to print to HP 4500 All in one printer.
I can print from Ipad, Itouch and MacBook Pro but not from Iphone 4.?????
I have tried everything.
Thanks.

Hello dobis11011,
You have verified a lot of common factors that can interfere with the printing method that you want to use.
I would also try some additional steps, you can try to print after each step to isolate the causing factor:
Verify Bluetooth is off (preferred setting).
Power your iPhone off and then on.
Press the home button twice and end the HP ePrint Home & Biz app from the multitasking section.
Delete the app and re-download it from the Apple App Store, as it is a free app.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to print to HP PSC1110 All-In-One Printer connected to WinXP PC?

Hello everybody,
I would like to us an HP PSC1110 "all-in-one" printer connected to a Windows PC in another room.
The easy part: The printer shows up in the browsing window, under the correct Windows domain, when I try to add an "other Printer" device.
The difficult part: When I try to select the printer model from the list of HP printer models provided, it does not show up, although HP PSC 1110 is included in the list of supported printers.
I also tried the ESP HP-deskjet drivers, both old and new version. But those result in printer errors on the Windows PC.
BTW: Printing over the net works well from other Windows PCs!
Can somebody out there who had a similar problem before give me a hint how to set up printing to an HP "all-in-one" over the Windows-Network?
Thank you,
Detlef

Thank you for the detailed information. Maybe I should have added a few screenshots too.
The suggested procedure probably works for a HP Photosmart Printer. However, the PSC1110 is a "Printer, Scanner, Copier" all-in-one device. Unfortunately, this one does not show up in the menus, although it is supposed to be supported. I assume that only an USB backend is available, but no SMB backend.
Is this correct? Is there a workaround?
Thank you for your feedback
DC

My photosmart C7250 all-in-one used to allow me to print black and white only, now it won't

My photosmart c7250 all-in-one used to allow me to print in black and white only if I changed properties to print in grayscale, black and white only. Now it says it won't print until I replace one of the empty color cartridges. I do no understand why the color cartridges are running out when I only use my black cartridge.

I still don't understand the difference between what I used to be allowed that I'm not allowed now. I was able to bypass the empty color cartridges by changing my print property to "grayscale" and "black only". Now I'm not allowed to bypass???

How can i add a wireless printer HP officejet 6310 all in one? is it possible

How can i add a wireless printer HP officejet 6310 all in one? is it possible..?

Hi @millep
To answer your question, no the Officejet 2620 is not a wireless printer;
- Source: Printer specifications
As for the USB cable, personally, I believe the intention is to bring down the cost of the printer by selling the USB cable separately. Many people already have printer USB cables kicking around the house, so instead of paying more for the printer and having an extra cable I believe the theory is reduce the cost and sell the USB separately for those who need to purchase one.
I hope this answers your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

how to print to my wireless all in one photosmart prem c410 when printer is not powered on?

Hi,
You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Cannot print to hp c7180 all-in-one using eprint from my ipad2

Similar Messages

Maybe you are looking for