Cannot print to HP printer after upgrading PS CC to PS CC 2014

Since upgrading Photoshop CC to Photoshop CC 2014 I cannot print from PS. All other apps on PC are fine. Printer drivers re-installed for good measure no joy. I have screen shot of random characters displayed on printer driver screen.
Any thoughts?

That is the HP printer dialog - not part of Photoshop or under Photoshop's control.
You need to contact HP about this issue, and see if they have an updated driver that fixes the problem in their driver.

Similar Messages

Cannot Print after upgrading to Mountain Lion

I can not longer print since upgrading to Mountain Lion 10.8.2. Prior to the upgrade I was printing; now, even though my printer is on the list (HP Officejet 7410xi, All-in-one) as being compatible, I still get "Power PC applications are not longer supported". On HP's website there was no help since the ML Upgrade contained the necessary drivers to print with. Any help or suggestions would be highly appreciated. Oh, I am new at this...so, please...KIS (Keep It Simple). Thanks!

I have a very similar problem that this solution has not fixed.
My HP 882C was no longer supported when I upgraded to Mountain Lion. I worked around for awhile through Windows that I have running on the Virtual Machine. Then, that went south.
So I now have a HP Officejet 6700. I've unsuccessfully tried to install it as a wireless; it kept hanging trying to creat the print queue. Now, I've connected it via the UCB and still can't get it installed. I did what you've suggested here. After deleting the files and downloading and installing the software from Apple I rebooted the system. It recognized that there was a printer and began setting up the 'HP Officejet 6700...'. It began processing with the message "Finding software..." displayed. Then it stopped with the following message:
"Can't install the software for the HP Officejet 6700 because it is not currently available from the Software Updaye Service."
I've also downloaded the software from HP several times, not succeeding there either.

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Reconnecting to a wireless printer after upgrading to Yosemite 10.10.

We upgraded Mac software to 10.10 and lost connection to our HP Photosmart Plus wireless printer. Attempts to find the printer via hostname and/or IP address keep failing. Any ideas of how to proceed?

Hello @DirkStuart ,
Welcome to the HP forum.
I understand that you are having problems with your printer after upgrading to Yosemite.
I would like to direct you to a post by Double-U-Dee.
Mac OS 10.10 Yosemite and HP Printer Support
Also here is Apples OS X Yosemite: Printing troubleshooting.
If these do not have the answer you are looking for, please let me know.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques. E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.) For example.
Robert Aldwinckle

Hp P2015d can't print after upgraded to 10.5

i can't use my network printer after upgrade to 10.5 from 10.4, anyone can help??
printer is P2015d

Use the Leopard dvd and do a Custom Install of the HP drivers to install the drivers. When that is done, delete the printer and re-add it using the new driver.
Hope this helps.

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)
Are others having the same problems?

Try this. Worked for me.
- turn off your router
- turn off you Mac's after removing all available printers
- turn off all iDevices
- do a factory reset of your printer remove all cables min. 30 sec.
- turn on your router first
- ran the network set up wizard
- give your printer also a new name like "DeskJet 2015"
Something which you don't have used before.
- turn on your Mac's and add your printer
- turn on your iDevices at least.
Should work after these steps.
It worked for me including all iDevices.
iOS and Yosemite

Ricoh Aficio SP 240DN cannot print after Yosemite installed

Ricoh Aficio SP 240DN cannot print after Yosemite installed

I have this problem too.
I've installed the most recent drivers for these printers and unfortunately it's still not compatible with Yosemite.
I guess all we have to do is wait until Ricoh/Lanier brings out an updated driver for us

Cannot print after downloading os7

cannot print after downloading os7

Hey snagger68,
Thanks for the question. The following article outlines steps for troubleshooting AirPrint:
AirPrint Basics
http://support.apple.com/kb/HT4356
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
1. Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
2. Is connected to the same Wi-Fi network as the iOS device.
3. Has the latest firmware version installed.
4. Has paper with enough ink or toner installed.
5. Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
Notes:
- AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
- Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.
Thanks,
Matt M.

Cannot End Call on Q10 after upgrading to OS 10.2

I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

marootz wrote:
I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT4623 i cannot activate my iphone 3gs after upgraded to ios 6.1

i cannot activate my iphone 3gs after upgraded to ios 6.1, please help!

read http://support.apple.com/kb/TS3424

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

BTW. I have seen posts suggesting age of Mac has an affect. Mine is MacBook Pro (Retina, Mid 2012)
The mail I am having problems send is Exchange and google mail. The google client I re-installed and this had no affect.

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks in response to Pita Fito I have contacted three more people that made the upgrade and they have the same problem

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
in response to Pita Fito
I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...

I can send e-mails just fine with apple mail on yosemite...
Might not be a generic problem but rather a personal problem..
You should try find a fix rather than waiting on apple.
Hopefully somebody can help you out.
More than happy to help with your settings/preference pain... And compare mine with yours...
If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
Is it a gmail or icloud email acount? Can be of more help if it is.

IPhone 3GS cannot access to 3G network after upgrading to OS 5

My iPhone 3GS cannot access the 3G network after upgrading to OS5. I have checked with my operator and shows that their 3G network is working fine. Only cannot access through the phone. When I enable 3G, there will be no service for my phone. Wifi is working fine.
Any idea how to resolve this?

zlwczr wrote:
Thanks, I will try this method. After restore and syn, will it automatically upgrade back to OS5?
No. If you have 5.0.1, then you will get 5.0.1 back. Restoring should still fix it though. I would prefer to have you back up to iCloud, because there are many known issues/errors when trying to restore via iTunes on iOS 5 or later.

I cannot configure yahoo small business after upgrading to Mavericks Help needed

Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Cannot print to HP printer after upgrading PS CC to PS CC 2014

Similar Messages

Maybe you are looking for