Cannot print to Mac mini Server print server from MBP
Setup two USB printers on a Mac Mini server, they were recognized and new drivers downloaded. I can print from this machine. I shared them over LPR, IPP and SMB and announced through Bonjour
I installed the printers on a new MBP
When I try to print it starts to spool but the printer goes to pause. If I un pause it just goes back to pause.
The error log said printer does not exist, I have removed and reinstalled the printers - no change
I have no quotas
Firewall ports open
Have tried printing via LPR, IPP using generic PostScript driver and vendor specific
Printer service is up in Server Admin
I have not setup a an LDAP entry for this device as I thought I would not have to - am I worng here
The other odd thing is I have Parallels setup on same MBP and I loaded Bonjour there and it prints fine from the VM - wierd huh?
What have I done wrong here
How do you locate the firewall settings on the server?
Similar Messages
-
On a Mac mini OS X server 10.8.5 TimeMachine cannot copy 2.5 TB (from a Lacie 2big Thunderbolt data disk) to another 6 TB Thunderbolt disk, runs out of space, Carbon Copy Cloner works perfectly: claiming just 2.5 TB after the copy. Thunderbolt disk is
LaCie 2big Thunderbolt Series 6 TBIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
Using Mac Mini running OSX Server (10.8) to host web sites on LAN
I would like to know how to use a Mac Mini running OSX Server (10.8 ML) to host web sites on my home network (LAN).
I am developing web sites and previously (before ML) I used my Mac Pro to 'host' the sites I was developing to test them out before publishing them to my hosting package. That was when I was using 10.7 Lion and theer was an option in the System Preferences to turn web sharing on.
I have since upgraded my Mac client to 10.8 ML and have configured it to do the same - even though there is no System Preferences option for web sharing any more.
I also have a Mac Mini running on my LAN and its been upgraded to OSX Server 10.8.
Im now trying to configure it to host the web sites I am developing but with no success.
I thought it was just a matter of adding them as sites in the Server's Websites panel (see screen shot)
but so far Ive had no success.
On my Mac client I can simply add a folder in the Sites directory and then open the web site by putting http://myhost/~myuser/name-of-folder and it will load the default file in the folder e.g. index.html
How do I achieve the 'same thing' on OSX Server?Hi Johnfromglenver,
There are no Mac drivers for the HP Officejet K60 printer. Therefore it is not compatible with the Mac operating systems. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl. There may be other solutions that could work for you.
I hope this information helps.
Advance 23
I work on behalf of HP -
How stable is the mac mini as a server?
Hi List,
I am planning to get the mac mini with snow leopard server.
Has anyone tried it?
How stable is the mac mini as a server?
I'd be setting it up for 10 mac clients.
It will be used as a file/print/dhcp server.
thanks.
Dpmax out the memory to reduce / eliminate paging. although you might not need to in your situation. I think printing is a light use of memory. Inkjet printers are heavy on the cpu.
electronics don't usually fail. It's the moving parts. Doesn't the mini take the 2.5 inch drives that are not as reliable as the 3.5? An external drive will get past this.
You could get an external bootable harddrive.
You need an external Firewire drive to boot a PowerPC Mac computer.
I recommend you do a google search on any external harddrive you are looking at.
I bought a low cost external drive enclosure. When I started having trouble with it, I did a google search and found a lot of complaints about the drive enclosure. I ended up buying a new drive enclosure. On my second go around, I decided to buy a drive enclosure with a good history of working with Macs. The chip set seems to be the key ingredient. The Oxford line of chips seems to be good. I got the Oxford 911.
The latest the hard drive enclosures support the newer serial ata drives. The drive and closure that I list supports only older parallel ata.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATAFW800_FW400USB
Here is an external hd enclosure.
http://eshop.macsales.com/item/Other%20World%20Computing/MEFW91UAL1K/
Here is what one contributor recommended:
http://discussions.apple.com/message.jspa?messageID=10452917#10452917
Folks in these Mac forums recommend LaCie, OWC or G-Tech.
Here is a list of recommended drives:
http://discussions.apple.com/thread.jspa?messageID=5564509#5564509
FireWire compared to USB. You will find that FireWire 400 is faster than USB 2.0 when used for a external harddrive connection.
http://en.wikipedia.org/wiki/UniversalSerial_Bus#USB_compared_toFireWire
http://www23.tomshardware.com/storageexternal.html
Here are two utilities for making a complete backup of your internal hard drive. I've recommend using one of these so that you can create a bootable system on your external hard drive. ( PPC require a firewire connected drive. ) Once created, you can run your system from the external drive. Hold down the option key on your keyboard then power on your machine. This will bring you in startup manager click on the drive image you wish to boot then click on the arrow key to the right.
"Clone, synchronize, backup. Schedule and forget it."
http://www.bombich.com/software/ccc.html
"SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless."
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
Robert -
I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need topurchase another copy of Snow Leopard Server?
The OS disks that are shipped with a particular product
are set up so that tey will only install on that product.
It will install on any Mini of that exact vintage, but that
is all.
This is to prevent people from doing exactly what you
are trying to do. The license for OSX shipped with any
is only valid for that product. Also, Snow Leopard,
including Server, is only permitted to be run on one
computer at a time. Bottom line, unlike Lion, legally
you cannot install the same copy on multiple
computers unless some "family pack" or site license
is purchased.
Yes, you need to purchase another copy.
The copy of Snow Leopard license is here:
http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf -
We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac. These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's. When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access. The files that work properly don't have that configuration. I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it. We're all using PC's and they get the Error: Access Denied-Contact your administrator--or something similar. I've seen on the web similar issues and it may have something to do with ACL permissions. I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files. Thanks for a solution!!
Oh, on the losing Internet, try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
PS. Your English is quite good & completely understandable. -
HELP!
So I have had a Time Machine wifi loop at the house for approx. 6 years. I run two Macbooks, 2 iPhones, 2 iTouch and a Samsung Smart Blueray on the loop.
I just bought a Mac Mini with Lion Server. When setting it up I'm not sure what or how I managed to do, but I now have 2 wifi loops, one doesn't lock and niether will support the Samsung BlueRay. Also, each time I want to go online with one of the other Mac devices i have to relog into the wifi loop.
Can someone please walk me through the fix. The mac Mini is plugged straight into the Time Machine to recevie its internet connection.
Thanks!
JohnYou often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
(Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
Then set DHCP for clients that will join.. this can then expand the scope of addresses..
It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it. -
I want to use a mac mini as a server supporting storage. I have other devices such as an iMac and iPad that will access information from the server. I do not want to purchase a monitor and keyboard as the unit will sit in a cupboard out of sight. Can I pair my macair to it for when I need to perform updates and maintenance ?
I have a 2010 Mac Mini running Yosemite and Server which I use
as a headless home server.
I have is set up to allow screen sharing and can connect to it and
control it with my iMac, Macbook Pro, iPhone, and a 2011 Mini Server
that I use as an HTPC.
You can check this out for all the Yosemite Server capabilities:
https://help.apple.com/advancedserveradmin/mac/4.0/
I have iTunes Home Sharing set up on it and have my entire iTunes
library on it. I can then use any of my Macs to play Movies or Songs
from it and only keep locally a select subset of that on my individual
devices.
Rather than and update server, I utilize Server's Caching Service. The caching
server will duplicate any update download (system or MacApp Store purchases)
any time a device that is connected to my network down loads one. The update will
then be stored locally and all other devices will download the update from it which
can be faster than from Apple directly. This has the advantage of only having to download
once with limited bandwidth internet connections. There is also an Update Server service
available, but it is some what more involved in setting up. However, it will download
and store all available updates.
There is another thing as well if you do not care for syncing things like Contacts, Calendar, etc.
to iCloud, you can set Server up to sync these items across devices locally. -
If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?
Your users can utilize Outlook no matter where your email is hosted at.
how will it be different for them
different from what? -
Mac Mini 10.6 Server startup disk size increase problem.
Mac Mini 10.6 Server shows system startup disk sized 50GB with 20GB free. Disk utility shows partition sized 500GB with 470GB free. How can I increase size of startup volume without complete reinstall?
Is the disk partitioned?
Boot the operating system DVD, use Disk Utility from the Utilities menu (second screen of the installation process, just before you start the actual install) to ake a complete backup to an external disk, make a second backup (in case there's a problem with the first), wipe and repartition the internal disk (using Disk Utility), and reload.
You'll want to consider whether you want to mirror the two disks within the box, too; to set up RAID-1 across both of the 500 GB drives in the box. That mirroring can be established when you're wiping and repartitioning the disks. -
Mac Mini 10.74 Server - Now Reboots Randomly
I have been running a Mac Mini OS X Server for last 3 months without a single error. I have 2 of them.
Yesterday, I upgraded to 10.7.4 (from 10.7.3) and today, one of my servers has crashed twice. Both times, it has rebooted (no Monitor attached to Mac Mini). It is out of service for 10 mins or so. This concerns me, as it never rebooted before 10.7.4. Also, other Mac Mini OS X Server doesn't have an issue.
Anyone else seeing this?
I usuallly wait a few weeks before installing software updates on servers - but I decided to yesterday (Sunday), becuase I had some time, stupid me.Your Computer was restaeted because of a problem:
Interval Since Last Panic Report: 341 sec
Panics Since Last Report: 1
Anonymous UUID: 53D8207A-7215-4C9E-829C-6803C1F51BD9
Mon May 14 14:26:05 2012
panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff7f80a45b0d, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000000000000001c, CR3: 0x0000000065087040, CR4: 0x00000000000606e0
RAX: 0x0000000000000023, RBX: 0x0000000000000059, RCX: 0xffffff800b250e60, RDX: 0xffffff800b4458d0
RSP: 0xffffff8090b1b7c0, RBP: 0xffffff8090b1ba00, RSI: 0x000000001dbc0ca1, RDI: 0xffffff800b4458d0
R8: 0x00000000c0000000, R9: 0x0000000000000000, R10: 0x8000000065087040, R11: 0xffffff80002da800
R12: 0xffffff800b6aaf80, R13: 0x0000000000000000, R14: 0xffffff800b250fb8, R15: 0xffffff8090b1b9b0
RFL: 0x0000000000010246, RIP: 0xffffff7f80a45b0d, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000000000001c, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8090b1b470 : 0xffffff8000220792
0xffffff8090b1b4f0 : 0xffffff80002c473a
0xffffff8090b1b6a0 : 0xffffff80002da0cd
0xffffff8090b1b6c0 : 0xffffff7f80a45b0d
0xffffff8090b1ba00 : 0xffffff7f80a46f42
0xffffff8090b1ba40 : 0xffffff800052ca84
0xffffff8090b1baa0 : 0xffffff80002fb9dc
0xffffff8090b1baf0 : 0xffffff8000313e06
0xffffff8090b1bb90 : 0xffffff800030c990
0xffffff8090b1bc50 : 0xffffff800030cf0e
0xffffff8090b1bf50 : 0xffffff80005cd61b
0xffffff8090b1bfb0 : 0xffffff80002daa13
Kernel Extensions in backtrace:
com.sophos.kext.sav(8.0.2)[A5921E10-F693-9290-D24E-EE5A71E052FA]@0xffffff7f80a4 4000->0xffffff7f80a48fff
BSD process name corresponding to current thread: swupd_syncd
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: Macmini5,3 (Mac-7BA5B2794B2CDB12)
System uptime in nanoseconds: 665441042873
last loaded kext at 49497389968: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f817ca000, size 28672)
last unloaded kext at 120643119541: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80a34000, size 65536)
loaded kexts:
com.sophos.kext.sav 8.0.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.ApplePlatformEnabler 2.0.5d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.0f3
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleMikeyDriver 2.2.0f3
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCPDRC 5.0.0d0
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleSDXC 1.2.0
com.apple.iokit.AppleBCM5701Ethernet 3.1.2b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.0f3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.2
com.apple.driver.AppleThunderboltDPInAdapter 1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.0
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.driver.AppleThunderboltNHI 1.5.5
com.apple.iokit.IOThunderboltFamily 2.0.0
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: Macmini5,3, BootROM MM51.0077.B10, 4 processors, Intel Core i7, 2 GHz, 4 GB, SMC 1.77f0
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE4), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD5000BTKT-40MD3T0, 500.11 GB
Serial ATA Device: WDC WD5000BTKT-40MD3T0, 500.11 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8281, 0xfa113000 / 6
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: OWC Mercury On-The-Go, 0x0dc4 (Macpower Peripherals Ltd.), 0x0004, 0xfd130000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3 -
As I have ordered myself one of the new 27" icore7 - 8gig 1TB systems (eagerly awaiting delivery), I have decided to convert my mac mini into a server, OSX servier is now quite reasonable for unlimited client licence. So I have purchased
4 gig to go into my mac mini Identifier:Macmini3,1 2ghz (8 gig just too expensive yet) and want to also upgrade the HD to a larger and faster unit.
I have been looking at the Seagate OEM 1.5TB Barracuda 7200.11 Internal Hard Disk Drive (7200RPM, 32MB Cache).
Question will the Mini support this size and speed. ?mmm 2.5"
I would rather not use the firewire 800 port for the OS drive.
how about a Seagate Momentus 7200.4 Laptop 2.5 inch Hard Disk Drive 500GB SATA 7200rpm 16MB (Internal)
I feel that the HD is slow in the mini and needs to be speed-ed up.
I suppose there is a possibility of bringing the sata cable out through the back and attaching a 3.5" drive in an external case... food for thought. -
How to add Dell printer to Mac Mini?
How do I add a dell printer to Mac Mini?
Did you try to Secure Empty the trash?
-
Mac mini as archive server: do any big disks work??
I'm proposing purchase of a mini (I have one on another project, works flawlessly) and lots (4-8 TB at least) of disk. I've heard of problems with the mini talking to RAID storage. I've also been through reviews on amazon and newegg and gather many brands of big disks (1-2 TB) are having problems - with macs on firewire, if not all PCs - with going to sleep and having to be removed/reconnected before they are visible again.
So I'm wondering if any in the mac mini community have had success with 2 TB or larger drives talking to their mac without difficulty over FW800. I'm leaning toward purchasing separate enclosures and putting better internal drives in there (e.g. OWC enclosures, Hitachi deskstar drives).
Any comments would be much appreciated.So how were you thinking of providing a username/password system on the Mac mini or are you just planning to use un-authenticated (guest) access? Without a clear security system in place interally you will not be able to protect your data from the outside world.
In actual fact I'm intending to re-task my Mac mini into a server as well although I'm waiting for Mac OS X Server to be brought to Intel before taking my current server, an old PowerBook G4 500MHz, offline and replace it with the mini.
My preferred security method is to send all inbound traffic from our DSL connection to our server (placing it into the DMZ), close all ports on the server except the absolute minimum (server admin etc) and provide VPN access. Once a VPN connection is established you can do what you like with the network with your username and password. All other traffic is simply denied as you require the VPN conection.
You may just want to buy youself a hardware VPN server to handle the security until Mac OS X Server. -
Making a Mac mini into a server
I cureently have an iMac. I would like to connect the Mac mini to my iMac. Then use the Mac mini as a server. Is there a step by step non-IT person guide for doing this?
Then you just follow the setup instructions for FileMaker Server. In my experience they're pretty clear.
http://help.filemaker.com/app/answers/detail/a_id/9964/~/installing-filemaker-se rver-12
If you encounter problems, FileMaker has their own forums:
http://www.filemaker.com/support/forum_selection.html
and there are many resources on the web also available, including a plethora of FM consultants.
Regards. -
Cannot unmount disk - Mac Mini
Hello! I recently purchased a used Mac Mini (specs provided below) from a friend, and I am starting the process of erasing all of his old data. The Mac Mini has two hard drives, MAC HD1 and MAC HD2. Only one of the hard drives was being used, MAC HD1, and had OS X Yosemite installed on it. I did some research and found out that to erase the first hard drive I needed to create a bootable USB, which I did using DiskMaker X and a 64 GB thumb drive (only one I had over 5 GB). That process was successful, and I then restarted and pressed ALT on my windows keyboard upon startup. I selected to boot using my thumb drive, and that seemed to work fine as well. I then selected Disk Utility and chose MAC HD1 from the choices on the left side. However, when I try to erase, I get an error that says "Volume Erase Failed with this error: Couldn't unmount the disk." Then when I try to unmount from the menu above I get "The disk
MAC HD1 could not be unmounted. Make sure that all applications and files are closed on the disk." I am a pretty tech-savvy guy, and my friend and I proceeded to put about 4-6 hours into trying to find what application/program/process might be keeping the disk from unmounting. We tried using sudo commands in terminal to kill spotlight, deleted every application/file that we could, and force quit everything and relaunched Finder. No luck. We decided to download What's Keeping Me, a program that shows processes and applications that are using the disk itself. Weirdly, it didn't show any processes for MAC HD1, but we looked closer and through a options window opened all open files on MAC HD1, which seemed to be at least 300. However, the list was just text, and we were unable to find out how to close any of them. I tried going to the Apple Store and they didn't help either. I'm simply wondering what it would take to unmount my MAC HD1 disk so I can finally get to using my purchased Mac Mini.
Side Note:
If this changes anything, my friend did say he was using the Mac Mini for a server of some sort, but he thought he turned it off already.... Anyways, just giving extra knowledge I know about the problem.
Specs:
Model Name: Mac mini
Model Identifier: Macmini4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MM41.0042.B03
SMC Version (system): 1.65f2
- Landonthe Lion Installer ( OSINSTALL.MPKG ) does more then only check for the CPU.
1) It checks CPU for 64bit capable ( core2duo and all later )
2) It checks for the presence of minimum 2*1024 ( 2048MB Ram )
3) It checks the SerialNumber, Board ID, MacModel Name, Year of Production and SMBios Version if they are whitlisted as "ok to install". The Installers "Distribution" file contains also MacModel IDs that are blocked completely.
Obviously your Mac Mini does not pass check 3) as your Mini is one of the blocked ones.
Maybe you are looking for
-
How do I get my XDP form in the SharePoint 2010 Adobe Form library?
I was able to get the Adobe LiveCycle samples for SharePoint to work. For some reason, I can't get my XDP forms to show up in the selection dropdown in the Adobe Form Library on SharePoint using the Adobe LiveCycle SharePoint connector for SharePoin
-
Dear All, I checked in SCN and did not find answer for my query so posting here. This is with reference to customer ageing report, we are developing z report for customer ageing since we could not get customer specific report either through standard
-
I've been following some tutorials on YouTube and they all keep using this tag creationComplete that doesn't appear in my code panel. is there a way to load this into my panel?
-
[Z68MA-G43 (G3)] BETA UEFI Version [E7676IMS.Oxx Releases]
E7676IMS.O20 ==> E7676IMS.O35 1.Modify some string. 2.Fixed the post not show OC Genie enabled information issue when under the BIOS setup set OC Genie mode 3.Fix the system can not boot up when plug 4 pcs of memory. 4.Fixed S3/S4/S5 resume will han
-
Has anyone tried setting up xgrid to run ffmpeg for encoding video? I've got alot of video that I need to encode and speed could be greatly improved with xgrid.