Cannot print to PDF - could not find resource file

Using Adobe Acrobat 8.1.4 Pro on Windows XP SP3
I've printed to the Adobe PDF printer a few week ago without problem
Now, when try to print, I get this:
Unable to find "Adobe PDF" resource files.
c:\documents and settings\jsmith\Application Data\Adobe\Adobe PDF\Settings\[]
(the brackets are really a square box that shows up)
The box says: Yes / No
If I click yes, it spends 15 minutes "installing" something and wants a reboot. That does not fix the problem.
I've removed Adobe completely, rebooted. Reinstalled Adobe, still same problem.
I do have a directory of:
\Settings where it is looking, but the directory is empty.
I can EXPORT to PDF just fine
I can open Firefox/IE and "print to" the Adobe PDF printer and that works fine.

Thanks TSN.
(how to check if Ram is full )?
the memory is 8 G Ram. I only have office 365, Acrobat X1 pro, Gimp, and Inkscape installed. The problem was there before I installed the last two.
I posted on Microsoft as well and the response was that since I could print the document on regular printer without any issues, then it is an Adobe issue. Using the toolbar is pdfing the full document. That takes a very, very, long time besides at the end of it, many pages are blank in the pdf file and then it is a matter of restarting the computer, re-pdfing until I am tired. So I print the pages incrementally. Any other way to pdf select pages without any problems?

Similar Messages

CRS-0210: Could not find resource while start ASM on 10G RAC

Dear All
I'm trying to install 10g RAC on Redhat 4.1. At the point at which I try to start ASM it fails with the message
ORA-03113: end-of-file on communication channel
select value from v$parameter where name='instance_type'
ERROR at line 1:
ORA-01034: ORACLE not available
This seems to be due to a failure CRS. The trace file shows:
[Thread-11] [17:14:2:907] [HAOperationImpl.runCommand:1254] CRS cmd is: /u01/app/oracle/product/10.2.0/crs/bin/crs_stat -u ora.bfhxx-sql012.ASM1.asm
[Thread-41] [17:14:2:964] [StreamReader.run:65] OUTPUT>CRS-0210: Could not find resource ora.bfhxx-sql012.ASM1.asm.
Executing
/u01/app/oracle/product/10.2.0/crs/bin/crs_stat
produces:
NAME=ora.bfhxx-sql012.LISTENER_BFHXX-SQL012.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
Is this a red herring or is it the reason ASM won't start? At what point should this entry have been created (ie should it already exist when ASM starts or should ASM create it)? Can I manually create the entry using crsstat.
Many thanks
Paul

It all depends on what your mapping problem was and what you did to resolve it. Here are a couple of things you could try:
-Make sure the orc.loc file on ebdb1 has the same entry as ebdb2. Also, say you are using shared raw devices for CRS: make sure your raw devices are consistent on both nodes.
If the above does not work
-Make sure the shared devices are consistent on both nodes and restore one of the OCR backups. I am sure at least one of the backups 4hrs/8hrs/1day/2day/1week some thing must be a worthwhile. If you do restore OCR from a backup make sure to run cluvfy before you start your CRS.
Always a good practise to take a backup of status quo before you restore from the backups.
It would be interesting to know what lead to your disk mapping problem in the first palce.
Good Luck!

Could not find resource 'ora.node2.vip'

During the extention of node,I get message to run three scipts on nodes:
1 /opt/u01/app/oracle/oraInventory/orainstRoot.sh node2
2 /opt/u01/app/oracle/product/10.2.0/crs_1/install/rootaddnode.sh node3
3 /opt/u01/app/oracle/product/10.2.0/crs_1/root.sh node2
When I run the 2nd script /opt/u01/app/oracle/product/10.2.0/crs_1/install/rootaddnode.sh on node3,get the following error:
[root@node3 ~]# /opt/u01/app/oracle/product/10.2.0/crs_1/install/rootaddnode.sh
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Attempting to add 1 new nodes to the configuration
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 5: node2 node2-priv node2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
/opt/u01/app/oracle/product/10.2.0/crs_1/bin/srvctl add nodeapps -n node2 -A node2-vip/255.255.255.0/eth0 -o /opt/u01/app/oracle/product/10.2.0/crs_1
CRS-0210: Could not find resource 'ora.node2.vip'.
Any idea?

Have you run cluvfy before the node addition?
The VIP should be resolvable, but not pingable until added to the oracle clusterware.
Try nslookup and ping of the node2-vip and let us know the results.

CRS-0210: Could not find resource 'ora.qlxdgalc001.vip'.

Hi All,
I am in a situation where I was not able to add the vip. This is the scenario:
I recently deleted one of the nodes from a 4 node cluster as some of the h/w maintenance is required for node1. after the maintenance window, I am adding the node back to the cluster. When I add the node back, I am not able to register the vip of the node with the cluster. The command and the error that I am getting are as follows:
[root@qlx001 ~]# srvctl add nodeapps -n qlxdgalc001 -o $ORACLE_HOME -A qlxd001-vip.abc.com/255.255.255.128/bond0
CRS-0210: Could not find resource 'ora.qlxd001.vip'.
Your suggestions are highly appreciated.
Thanks,
Sai.

Any replies are highly appreciated.

I have backed up my iPad using iTunes to windows 8 Lenora laptop but I could not find my files and play video files in my laptop.

I have backed up my iPad using iTunes to windows 8 Lenora laptop but I could not find my files and play video files in my laptop

You cannot access files in the backup on your computer.
Do you mean that you synced with iTunes and transferred your purchased videos and app documents? If that is what you mean, what videos are you talking about? If they are videos that you took with the iPad, they do not sync to iTunes. What files?
What exactly are you trying to do? Details please.

Policytool give me error Could not find Policy File ....\.java.pol

hi master
error Could not find Policy File: C:\Documents and Settings\Administrator\.java.policy
Sir when I open policytool the system give me this error
And I use http://www.jensign.com/JavaScience/www/keystorereader/index.html this link
For Keystore, Policy and Security File Reader
that give me this message
------ Default Policy File and Keystore Status ------
java.home C:\PROGRA~1\Java\JRE15~1.0_1
C:\PROGRA~1\Java\JRE15~1.0_1\lib\security found.
user.home C:\Documents and Settings\Administrator
C:\Documents and Settings\Administrator\.java.policy NOT found.
C:\Documents and Settings\Administrator\.keystore NOT found.
How set user home and keystor please give me idea
thank
aamir

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

Could not find the file "flash.ocx"

I have Windows XP and the latest version of Flash but keep
getting a error message popping up saying - Could not find the file
"flash.ocx"
Does anyone know how i can sort out this problem!
Thanks!

Salutations rajmak2000, tu nous disais :
> I have Windows XP and the latest version of Flash but
keep getting a
> error message popping up saying - Could not find the
file "flash.ocx"
Hi !
If you've got the latest version of flash, the message should
says
something like "could not find the file flash8b.ocx" instead
of
"flash.ocx" (who is, it seems, flash 7.0).
I suspect, once again, that registry rights are broken.
Try this script :
http://docxp.mvps.org/b1n/FlashRepair.exe
Bye
~Jean-Marc~
http://docxp.mvps.org
http://msmvps.com/blogs/docxp/

Post 10.3: Could not find the file "hw.kb" to install.

I'm getting this error on my 10.3 clients.
"Could not find the file "hw.kb" to install"
I think this is the April PRU...I have applied the post 10.3 fix and this is still not working :/
Full Message:
GenericActions.FileCouldNotBeFound{hw.kb}
Message ID: GenericActions.FileCouldNotBeFound
Related Objects: /System/System Bundles/102d38812c9437a05ee01e8bc93369f0

This was not related to the 10.3 update, atleast not directly.
I deleted the April PRU in system updates, checked for updates, and reapplied.
This solved my issue.

Error: Could not find the file "flash.ocx"

I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!

Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem!

Downloaded aquarium screen saver. Says can not find Resource file

Downloaded Auaruim screen saver, installed it, but can not find Resource File.

>Funnily enough it loaded on an old pc easily!
Hi
This means that drivers are ok and there must be something wrong with the system preinstalled on Equium U400.
How did you proceed?
Its important that you would NOT connect the Dynadock to the notebook before the drivers and software installation has not been finished.
Therefore you have to install the software firstly. Then after new reboot connect the Dynadock to the notebook and the installation would finish the next steps.

Could not find language file error message

I connected without problems to the login screen last night, but when I tried to log in to a session on my computer, I got this message:
Could not find language file https://arkadinoneplace-ah.adobeconnect.com/common/meetingAS3/lang/breezeopenmeetingstring s-en.xml --- https://arkadinoneplace-ah.adobeconnect.com/common/meetingAS3/launcher/launcher.swf
I could connect and login on 2 other computers in the house, so didn't miss the session, but want to be able to use my computer in future. The session was in English and my set language is English (Australia), as the meeting room and I are both in Sydney.
Any ideas on what is wrong with my computer settings? I am using Windows 7. I checked that the Explorer settings are the same in the computers that worked.

We had the same problem with one user, here is the article she followed to fix the problem. http://support.mozilla.org/en-US/kb/flash-113-doesnt-load-video-firefox?s=video+doesn%27t+ work+in+firefox&r=0&e=es&as=s Might not be the same scenario for you but thought it might be of help.

Send spool as PDF, error in opening PDF- Could not find the XObject '00014'

Hi
I am sendind a spool as PDF and when opening the PDF I am getting error saying Could not find the XObject named 00014.
Please let me know how I can see the PDF contents proerly.
Regards
Bala

Hi Bala
Check the sample which can be useful for you.
Pseudo code for sending PDF attachment:
TABLES: tsp01.
TYPES: BEGIN OF t_spool,
                      Rqident TYPE tsp01-rqident,
                END OF t_spool.
DATA: i_spool TYPE STANDARD TABLE OF t_spool,
            Wa_spool TYPE t_spool.
SELECT rqident FROM tsp01
INTO TABLE i_spool
WHERE rqowner = sy-uname.
SORT i_spool DESCENDING BY rqident.
LOOP AT i_spool INTO wa_spool.
ENDLOOP.
YPES: l_ty_tab_pdf TYPE tline OCCURS 0.
DATA: l_pdf TYPE l_ty_tab_pdf,
            l_spool TYPE tsp01-rqident.
Type for binary attachment table.
TYPES: l_ty_tab_objbin TYPE solisti1 OCCURS 0.
DATA: l_objbin TYPE l_ty_tab_objbin.
            l_spool = wa_spool-rqident.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid                    = l_spool
        no_dialog                      = ' '
      TABLES
        pdf                            = l_pdf
      EXCEPTIONS
        err_no_abap_spooljob           = 1
        err_no_spooljob                = 2
        err_no_permission              = 3
        err_conv_not_possible          = 4
        err_bad_destdevice             = 5
        user_cancelled                 = 6
        err_spoolerror                 = 7
        err_temseerror                 = 8
        err_btcjob_open_failed         = 9
        err_btcjob_submit_failed       = 10
        err_btcjob_close_failed        = 11
        OTHERS                         = 12.
IF sy-subrc <> 0.
    WRITE: / 'error', sy-subrc.
ENDIF.
**/ Convert the PDF format to the table type required for the attachment.
CALL FUNCTION 'QCE1_CONVERT'
    TABLES
      t_source_tab         = l_pdf
      t_target_tab          = l_objbin
    EXCEPTIONS
      convert_not_possible = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    WRITE: / 'error', sy-subrc.
ENDIF.
TABLES: soli.
DATA: v_email TYPE soli-line. Managers Email
DATA: l_adrnr LIKE kna1-adrnr. Address Number
DATA: l_objky TYPE nast-objky. Object Key
DATA: l_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: l_objtxt    LIKE solisti1 OCCURS   0 WITH HEADER LINE.
DATA: l_objpack   LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: l_doc_chng LIKE sodocchgi1.
DATA: l_objhead   LIKE solisti1 OCCURS   0 WITH HEADER LINE.
DATA: l_tab_lines LIKE sy-tabix.
CONSTANTS: k_true TYPE boolean_flg VALUE 'X'.
DATA: l_mail TYPE somlreci1-receiver.
l_mail = v_email.
Creation of the document to be sent as File Name
l_doc_chng-obj_name = 'SENDFILE'.
Mail Subject
l_doc_chng-obj_descr =l_text-001.
Here text-001 will contains Compensation Review Statement for Employee Name
Here we can concatenate employee first name and last name to l_text-001.
Completing the recipient list
l_reclist-receiver = l_mail. Manager Email Address
l_reclist-rec_type = 'U'.
APPEND l_reclist.
Mail Contents
l_objtxt = text-002.
APPEND l_objtxt.
Calculate email size in bytes
DESCRIBE TABLE l_objtxt LINES l_tab_lines.
READ TABLE l_objtxt INDEX l_tab_lines.
l_doc_chng-doc_size = (l_tab_lines - 1 ) * 255 + STRLEN( l_objtxt ).
Creation of the entry for the compressed document for the email text
CLEAR l_objpack-transf_bin.
l_objpack-head_start = 1.
l_objpack-head_num = 0.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'RAW'.
APPEND l_objpack.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
DESCRIBE TABLE l_objbin LINES l_tab_lines.
l_objhead = text-001.
APPEND l_objhead.
CLEAR l_objpack.
Creation of the entry for the compressed/attached document
l_objpack-transf_bin = k_true.
l_objpack-head_start = 1.
l_objpack-head_num = 1.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'PDF'.
l_objpack-obj_name = text-005.
l_objpack-obj_descr = text-001.
l_objpack-doc_size = l_tab_lines * 255.
APPEND l_objpack. "/ .
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = l_doc_chng
      put_in_outbox              = 'X'
    TABLES
      packing_list               = l_objpack
      object_header              = l_objhead
      contents_bin               = l_objbin
      contents_txt               = l_objtxt
      receivers                  = l_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
IF sy-subrc <> 0.
    WRITE: / 'unsuccessful', sy-subrc.
ELSE.
    WRITE: / 'successful'.
ENDIF.
*Take note it is a requirement to do a commit work for the email to go into transaction
SOST.
COMMIT WORK.
Regards,
Sree

Fix MSBuild error = Could not find .datasource file

Hi,
I have a VS2010 solution that I opened in VS2013 and followed the automatic conversion process. After that I edited the TFS build process template to remove the extraneous references to Version=10.0.0.0 which were duplicated due to a VS2010 bug (I
found a blog by an MS employee that pointed to this issue). The solution builds fine from my VS2013 but when I submit it to TFS build server using the modified build process template, I get an error (please see attached) referring to missing .datasource
file for one of the WCF projects.
What could I do in terms of possible adding build parameters to the MSBuild or changes to the WCF project to remove this error?
Thanks
$/E2E/Root Controller/Main Branch/OATI.E2E.WebService.sln - 1 error(s), 218 warning(s)
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\WebApplications\Microsoft.WebApplication.targets (178): Unable to copy file "Service References\GridPortInfoService\WcfServiceE2E.GridPortInfoService.HardwareInfoResponse.datasource" to
"D:\Builds\8\132\Binaries\WcfServiceE2E\_PublishedWebsites\WcfServiceE2E\Service References\GridPortInfoService\WcfServiceE2E.GridPortInfoService.HardwareInfoResponse.datasource". Could not find file 'Service References\GridPortInfoService\WcfServiceE2E.GridPortInfoService.HardwareInfoResponse.datasource'.

Hi LongD,
Thanks for your post.
What’s the version of your TFS, TFS 2010 or TFS 2013?
You want convert your VS 2010 solution to VS 2013 version, and built it using TFS 2013 Build?
On your current build agent machine, try to manually build your converted solution using VS 2013 and MSBuild command separately, ensure you can manually build your solution on build agent machine successfully. If cannot manually build on build agent machine,
please resolve this manually build issue first.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CRM 2015 Installing fails: Action MicrosoftCrm.Setup.Server.BackupUpgradeDataAction Failed Could not find the file 'C:\intpub\wwwroot\web.config'.

I don't have many issues... but when I do it is usually a bad one.
I took my CRM 2013 install running on Server 2008 and did an upgrade to server 2012 R2. No issues. All updates applied. From there I run the CRM 2015 installer to run the upgrade..... Yes, running as admin, and after the "Pre Flight
Check" everything is good. From there the install starts to copy files..... I get this error.
00:16:43| Info| CrmAction execution time; BackupUpgradeDataAction; 00:00:03.0020974
00:16:43| Error| System.Exception: Action Microsoft.Crm.Setup.Server.BackupUpgradeDataAction failed. ---> System.IO.FileNotFoundException: Could not find file 'C:\inetpub\wwwroot\web.config'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite, Boolean checkHost)
at Microsoft.Crm.Setup.Server.BackupUpgradeDataAction.Do(IDictionary parameters)
at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
I am finding no references to this issue any where. Looking for suggestions. It appears that this file does not actually exist. Somewhere during the upgrade maybe it got deleted. I have put an old web.config file in this
path, rebooted everything and still get the same error.
Looking for some suggestions.
Pierre Hulsebus

Sounds like a problem with the information about where the Crm website is installed. Crm uses 2 registry values 'website' and 'websitepath' under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSCRM. Do these look correct, and is the Crm website under c:\inetpub\wwwroot,
or elsewhere ?
The last part of the 'website' value is the website id, which you can see in IIS Manager
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

HT4796 I could not find the files I transferred to my MAC from PC after using the Migration Assistant.

Where do I find in my iMAC the files I tranfered from my PC using the Migration Assistant. I could not find a setting to what folder I could to set to transfer it before I started to transfer.

Migration Assistant creates a new user on your system and puts the files in that users home folder. Setup Assistant would transfer the files into the user folder of the user account created when originally setting up your Mac. Setup Assistant is what runs when you first turn on and setup your Mac and Migration Assistant is in the Utilities folder inside the Applications folder.

Cannot print to PDF - could not find resource file

Similar Messages

Maybe you are looking for