Cannot Print to Xerox Workcentre PE220 through Airport

Folks,
Been trying to print to a Xerox Workecentre PE220 via Airport but no joy. I can print OK if the printer is directly plugged in.
I am using Belkin Wireless router and it is working fine through my other PCs and also my imac when booted onto windows.
The Belkin website recommends using IPP, but when I set up the printing with the fixed IP address of the print server it always shows it as 'busy'.
Any other suggestions ?
Cheers,
Campbell

If the PC's are working fine, then have a look at the port configuration being used. Typically Windows defaults to Standard TCP/IP Port, which uses Port 9100. For the Mac this is HP Jetdirect - Socket.

Similar Messages

  • Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    John -
    My "Use" menu only contains Apple print drivers.  And Canon drivers, from the location I set this machine up.  None for my home use....which is a Xerox machine.
    Not being on the menu, I don't know how to acquire this generic driver. 
    Any further helpful hints?
    I appreciate your thoughts and help.
    Lisa

  • Printing to Xerox WorkCentre 7655 From Mac OS 10.4.9

    I have a 1.5 GHz PowerBook G4 (1 GB RAM) and upgraded to Mac OS X (10.4.9) a couple of days ago. My printer (Xerox WorkCentre 7655, attached through Airport Wireless/Ethernet) will only print one copy, regardless of how many copies I request. If I request 200 copies, I still only receive one copy from the printer.
    I noticed that one of the problem 10.4.9 "corrected" was the number of copies with the print server.
    What gives? How do I get the number of copies I request to print out correctly?
    I have shut everything down, re-set everything, reinstalled the printer drivers, and scoured the settings to make sure they are correct. This was clearly engaged when I upgraded to 10.4.9... Any helpful thoughts?
    PowerBook G4   Mac OS X (10.4.9)  

    I have encountered the same problem -- only prints one copy, regardless of how many are requested -- with our Xerox WCP C2636. Xerox tech support reloaded and upgraded the software on the printer and I reinstalled the PPD on my machine. Choosing "collated" fixed the problem in Adobe InDesign CS2 and Adobe Acrobat Pro 7. But the problem persists in other apps, such as Word 2004, Preview and Pages. I spoke with Xerox level 2 sofware support; they were unable to reproduce the problem on their test Mac (I suspect it wasn't upgraded to 10.4.9).
    I suppose that I am joining the increasingly large number of users who are eagerly awaiting a fix for this annoying and frustrating problem.

  • Logo appearing in print preview but not in print for Xerox Workcentre M118

    Hello experts,
    I am not able to print logo(in .bmp) format in Xerox Workcentre M118 PCL 6 printer. It is displaying accurately in print preview. While taking print out only grey background is coming, no trace of logo. Can anyone suggest, what are the print related settings needed in SPAD or any other transaction needed to print graphics. The logo is coming accurately if it is stored in pdf and then printed.
    Regards,
    Debopriyo

    hi,
    To print logos using the SMARTFORMS, we need to first upload that logo onto the application server. The steps to upload the logo onto the application server are as follows:
    1. Go to transaction SE78
    2. Select the desired graphic in the tree (for example, BMAP)
    3. Choose GRAPHIC --> IMPORT
    4. Enter the name of the graph and the description
    5. Select the type of the image (black/white or color)
    Now the logo is uploaded onto the application server. To print this logo using the SMARTFORM, create a graphic node in the window and enter the name of the image you had just uploaded. Your logo should now print.
    Refer the following links.
    http://www.sapmaterial.com/smartform_example.html
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci1255081,00.html
    Below is the link for print related problems.
    http://www.geocities.com/SiliconValley/Grid/4858/sap/Basis/printprobs_solutions.htm

  • OS 10.6.8 update will no allow me to print a Xerox Workcentre 7132 on a network

    With OS 10.6.7 everything worked perfectly.
    Now with 10.6.8 I cannot print.  Printer pauses in print.  I cannot print, period.  Though all Windows based computers can.
    Any assistance will be appreciated.
    And as additional information...... when I updated.... both iMac and MBP will not print on the Workcentre 7132 via the 'network'.
    Thanks,
    Reed

    Yes,there's nothing wrong with FCE 4 and as long as you have all the updates for the computer it should work on any OS .........  except some people have reported problems with the latest Mountain Lion.
    Lars  ....... in your original post you made a totally incorrect statement saying that FCE was (basicly just an expanded iMovie - yes, I felt ripped off)
    FCE is nothing like iMovie in any way, as it is actually a slightly cut-down version of the 900 euro Final Cut Pro.
    If you think it has not got many features, you mustn't have found them, as it is to all intents and purposes as fully-featured as any pro editing app.
    As a pro app it's not something you can simply install and use immediately  .........  unless you are already familiar with pro editing.
    It can take weeks or more to become familiar with its basic features.

  • Publishers 2013 cannot print to Xerox 6180N

    Hi there. Recently installed Word 2013 and Publisher 2013 for Home and Business. Any Publisher jobs cannot print to the specified printer, Xerox Phaser 6180N. We also have a Konica Minolta. It has not problems printing there. Our OS is Windows 8, 64bit.
    We have installed the latest driver with Post Script version. We have tried other things, like the PCL driver. No success there either. There is an error message. "Publisher cannot handle this job". What are the printing requirements for Publisher
    2013? Thank you in advance for any tips concerning this. 

    Hi,
    Please go to the Xerox site and confirm if you have installed the right driver. Please make sure you selected the right operation system. See:
    http://www.support.xerox.com/support/phaser-6180/downloads/enus.html?operatingSystem=win8x64&fileLanguage=en
    You can also contact the Xerox support to help resolve this problem.
    In addition, more information about Xerox Windows 8 print drivers, you can refer:
    http://download.support.xerox.com/pub/drivers/Compatibility_Matrix/other/win8/en/Windows8_Matrix.pdf
    Regards,
    Steve Fan
    TechNet Community Support

  • Cannot print to Epson photo r2400 w/airport

    I have a macbook pro and cannot print to an r2400. The priinter workds with my g4 powerbook and prior to an airport firmware update. I get a looking for printer message for several minutes and then I get a message that says: " Communication error" at times it gives you code" (-70012)" The printer does work when directl connected to the printer
    Help

    I'm so embarrassed.  The reason I was having trouble printing is because I did not install the latest print driver from Epson for Mountain Lion 10.8.1.   I thought of this in the shower and tried it and now everything is fine. 
    I hope I didn't send anybody on a wild goose chase.
    David

  • Cannot print iwth new MacBook Pro on Airport Express

    I have a MacBook Pro, running printing through the Airport Express on a Samsung ML-1750 and in order to use the airport, I have to turn it off, then on and then i can print wirelessly. aftering printing one document, i must turn off airport and then print again. There was never a problem with any of my previous Macintosh laptops in the ten years I have used them with Airport.
    I have lost a day of my life on this problem and would really appreciate help with this.
    thanks

    I have struggled for weeks with this problem, even trying other printer drivers. Now suddenly, out of nowhere, the printer works! And I have only repeatedly installed other drivers to include the gimp print. Why it works, for how it will work--I cannot say.
    Why is this?
    Oh, maybe I shouldn't ask.
    Cheers.

  • Cannot print from pc/windows xp through time capsule

    I currently have my hp printer connected to time capsule by usb, internet modem connected to time capsule by ethernet, my pc connected to time capsule by ethernet, and my mac wireless to time capsule.
    I'm printing successfully wirelessly from my mac but I cannot get my pc to print. I've run bonjour and restarted pc and still nothing.
    Any suggestions?

    I'm running into a similar problem. I recently added a Time Capsule to a mixed-platform network. The TC is configured to extend my existing wireless network, and my HP LaserJet 2015d is connected to the TC by a USB cable. My MacBook Pro found the printer and works with it flawlessly. I downloaded Bonjour Services for Windows this morning, and though Bonjour easily finds and configures the HP LaserJet 2015 it finds on the TC I can't actually print anything. Test pages and everything else generate a less-than-helpful "failed to print" error message.
    I'm running Snow Leopard (fully patched) on the Macbook Pro and Windows XP SP3 (fully patched) on my PC.
    I found another thread that suggested replacing the name that Bonjour gives the printer with an IP address of 10.0.1.1 (reached using Printer -> Properties -> Ports -> Configure Port (for the TC/Airport printer). That still generates the same "Failed to print" error.
    Thanks!

  • Upgraded to OSX 10.6.8 and now cannot print to Xerox Phaser 6180DN

    Since upgrading to OS X 10.6.8 on 23rd June I have found that printer reports as "paused".
    If you click "resume" it apparently accepts the command but then comes back immediately as "paused".
    Any advice would be appreciated (though I suspect it is a glitch in 10.6.8.)
    (I have seen a similar report on the Xerox support website)

    Apple clobbered the PS drivers - the fix for this has been poseted - see:
         https://discussions.apple.com/message/15498216

  • Cannot print through Time Capsule to HP P1005

    I cannot print to my HP P1005 through my Time Capsule. It has always been flaky connecting from my PCs on the network or my Mac. Now NOTHING can print to it. The Time Capsule shows the printer correctly. When I try to print to it from my Mac, the status just goes from "Printing" to "Stopped". I have tried various sequences of turning it on and rebooting the Time Capsule, but to no avail.

    open your system preferences > print & fax
    click on your printer, and click the - sign to remove it.
    click on the + sign to add it again using bonjour

  • Cannot print from IE11 with adobe reader 9.4.2

    When we open pdf files within IE11 and try and print, the printer properties box becomes unresponsive.
    we need to crash IE to resolve it, but are unable to print.
    we cannot upgrade Adobe Reader as we have another application which doesn't work with anything higher.
    I saw there was a workaround for adobe acrobat, but we need a fix for reader if possible
    changing the setting in adobe to open the pdf in it's own window is not a solution for us either

    No difference in output using the latest version.
    We are printing to Xerox WorkCentre 7425/7435 printers. When printing from a full version of Adobe Acrobat the advanced button of the Print Driver popup has check options for Marks under Marks and Bleeds while printing from Adobe Reader does not.

  • Adobe Reader 9.4 cannot print

    Hi, all,
    I cannot print with adobe reader 9.4 after adobe flash player 10 being installed and the problem goes away when I uninstall flash player. Is there anyone with the same issue?
    Thanks.
    TK

    No difference in output using the latest version.
    We are printing to Xerox WorkCentre 7425/7435 printers. When printing from a full version of Adobe Acrobat the advanced button of the Print Driver popup has check options for Marks under Marks and Bleeds while printing from Adobe Reader does not.

  • Cannot print crop marks in Adobe Reader 9.4.2, 10.1

    Printing from an A4 pdf to A3. Using a full version of Adobe 7 or 9.42. the crop marks appear but using Adobe Reader 9.4.2 and up no crop marks appear. Show art, trim, & bleed boxes is ticked. Does Adobe Reader print these marks?
    Thanks in advance.

    No difference in output using the latest version.
    We are printing to Xerox WorkCentre 7425/7435 printers. When printing from a full version of Adobe Acrobat the advanced button of the Print Driver popup has check options for Marks under Marks and Bleeds while printing from Adobe Reader does not.

  • After installing Flash 10 I cannot print anything

    Next I uninstall Flash 10 and I can once again print. I reinstall Flash 10 and once again I cannot print. I have been through this cycle a number of times and every time I install Flash 10 my print function does not work. I uninstall Flash 10 and the print function works

    Please tell us more. X86? No GUI for root? CDE? Java Desktop? What were the answers that you gave to the install questions.

Maybe you are looking for

  • Black bars on iMac? (Late 2006)

    Hi, I've been getting weird black bars on my iMac. They seem to appear when there are alot of applications loaded. Some times they're on the side of windows. Sometimes on text. Sometimes my mouse turns green. Sometimes my dock is discolored completel

  • Problem printing on dot-matrix printer with continuous paper

    Post Author: kdebruyckere CA Forum: .NET Hi, We're currently developping an .net application for a customer of ours in VS2005 (c#). I used crystal reports for VS2005 to create an invoice. The invoices have to be printed on a dot-matrix printer with c

  • HTTP 401 Unauthorized, error in proxy to SOAP Scenario

    Hi all, We got the below error in our proxy to SOAP Scenario. com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized We configured User Authentication

  • XSL and SQL query : special chars such as ampersand

    Hello, I've got this to create canonical XML file : PROCEDURE CANONICAL_XML_XSL(query IN VARCHAR2, p_file_path IN VARCHAR2,                p_file_name IN VARCHAR2) AS Ctx DBMS_XMLGEN.ctxHandle; -- Var's to convert SQL output to XML v_xml clob; xmlc v

  • Why won't xm radio play on my computer?

    site loads fine and then when i get to the part where it is supposed to play music, it will not load or buffer like it did previously. Newest version of Firefox loaded and it started then.