Cannot print via network on Epson R300

Hi, I have Epson Stylus Color R300 connected to my wireless router that has printer server. It works fine with windows (one desktop machine with Windows XP and one laptop with Windows 7) but I cannot print from macs (Macbook 2008 and Macbook Pro 2010, both OSX 10.6.6 with latest updates). I tried to play around with different drivers and settings - no luck. Sometimes printer replies '192.168.1.1 is busy', sometimes is does not do a thing. I tried native Epson drivers, gutenprint 5.2.6+CUPS, PrintFab - no luck.
Did anyone have any similar problem? Any suggestions?
Thanks in advance.

Thanks for your reply. The router is Zyxel Keenetic though this product is for Eastern European market only. I tried to search their website and found similar model for Western Europe - http://www.zyxel.co.uk/web/productfamilydetail.php?PC1indexflag=20040520161313&CategoryGroupNo=7C8C841D-F9CB-46AD-B0DA-C 4FA7F1DA500
I have tried IPP and LPD but nothing worked. After googling this issue a bit I found that some people tried to put P1 as queue but it did not help as well.
Message was edited by: sorcer

Similar Messages

Cannot print via network / HP 8000DN Printer

I have been racking my mind and searching support forums all over the web. I cannot print via my HP Laserjet 8000DN. I print over the network and do not have any way to connect it directly to my iMac. Everything worked fine with Tiger and when I did the upgrade I didn't think it was a big deal thinking I should have done a clean install anyways. After a clean install I had the same problem. Under the supported printer page for 10.5 it lists my printer however I cannot get it to install under the 2 listed drivers and also with the older drivers downloaded from HP. Please help. I print often and am just about to give up on 10.5 until 10.5.1 comes out. It's a $4000 printer and I am not going to buy a new one based on a driver issue.
Thanks in advance to all that help!!

user error at the time...

Cannot print via network to Canon imagerunner color 2620

I've installed the drivers/softwre, added the printer.
But when I try to print:
1) Print job starts
2) Print job shows completed
3) Nothing comes out of the printer!
(print job is done via ethernet/wireless network)
Please help
Printer model: Canon ImageRunner Color 2620 (in the US), aka iRC2600N (in China)

Hi William,
Thanks for the reply. Okay, let's assume it is a Canon board. Therefore I recommend you perform the following steps.
1. Ensure you are using the Canon PS Driver v1.60. This was the first version of a Universal driver to include support for Intel Mac's. You can download it from the Canon Australia web site (http://www.canon.com.au/products/business/multifunctionals/multifunctionaldigital_devices/iRC2620drivers.aspx).
2. Open the Printer Setup Utility and click on the title menu. Click on Reset Printing System. This will delete the Canon driver from your system. To be sure, open Library > Printers > Canon. The driver resides in a folder called PS. If you see it, delete it and empty the trash. Then restart the Mac.
3. Once the Mac has restarted you can run the installer for the v1.60 driver. You will have to reboot again once the installation is complete. With the Mac back on, open the Printer Setup Utility. Click Add and then click More Printers. Select 'Canon IP (PS)' and then enter the IP address of the iR C2620 and a queue name of LP. Click Add. The driver queries the printer, selects the appropriate ppd and configures the cassette and finisher setup.
4. With the printer now residing in the printer list, open TextEdit and write a few lines of text. Click File > Page Setup and ensure that A4 is selected. Then select Print and click Copies & Pages. Select Special Features from the menu. You will see an image of the copier and the Job Accounting tab. Because the driver queries the printer, if Job Accounting is enabled, the driver will reflect this. So you will have to select the Job Accounting tab and enter a valid ID and password. Now make sure this ID has enough prints remaining. If you are using an ID that doesn't have any remaining prints, the job will be deleted once it arrives at the copier. The other things to watch out for is the value for colour and b&w. With the cost of colour printing, some admins set the colour value quite low (or zero) meaning that if your document does have any colour it will be deleted by the copier once the colour print limit is reached.
5. With the ID and password set ( if needed) print the document. If it prints then open a different application and see if you can print from it. If it doesn't print, then please post back here the last 10 entries from the cups error log. This can be found via the Console application or the System Profiler.
Paul

Cannot print via network pc

Just prior to Xmas my Macbook Pro would print fine to a Windows XP PC conncted printer on a network. I could print from the Mac and Windows7/Parrallels Desktop side of things. Then my anything I tried to print went into a queue and never moved.
I cancelled the printer and tried to set it up again. Now as try and connect to that Windows PC even though I can see the printer and can put in my password to gain access I then get a an error telling me to speak to the administrator who are stumped!
Anybody got any ideas on how to overcome this?
Thanks

user error at the time...

HP LaserJet P2015 not printing via network

Hi,
looking for help.
I cannot print via the network on HP LaserJet P2015. It works via USB. When I try to add the printer it is identificable by Bonjour (Nearest Printers). It tries to configure the printer and appears as being active (green dot) but when try to print it says Connecting to Printer but then reports an error message of The printer is not responding.
Any ideas on how can fix ? Thanks in advance !

You can connect to Bonjour printers in Mac OS X, just select the Printer in the Print & Fax preference pane as usual and click on Add

CUPS - printer via network /printserver

Hi there,
I have got some problems with a printer via network.
Situation:
Me - Arch (updated)
The Printer is connected with a printserver (Canyon) - this one is normaly conected with our LAN and is run by our Server (Windows 2000).
Normally (which also worked with Ubuntu) I have to install the printer via the Window2000-PC.
This I did with the gnome-cups-manager (the whole process with the ppd-files and so on)....
Now the problems: I can't print: All the time, when I want to print a test-page, the printer is stopped - the job, too!
I saw the part in the wiki (deleting the printer and adding it again) but it doesn't work!
Next problem is, that I'm just able to print or configure the printer as root,
what can I do?
If you need more information, you'll get them
Thanks
Martin

With network printers the better way, at least in my opinion, is to use the printer's IP address and use that to communicate with it. I tend to add it to my /etc/hosts and that gives me a simple way to "talk" to the printer accurately.
Hope this helps.
R

Cannot print to network printer via router

I have attached my EPSON CX3200 printer to the USB port on my US Robotics router but i cannot print to it from my Mac.
When i try to print on it by wireless from a windows laptop, it works without problems.
I think i tried all settings in printerconfiguration, without succes.
I already found out that i had to select the GIMP driver for IP printing but that didn't help.
What should by the host name (xxx.local) for this printer when it is attached to the router? In my list, the printer attached to the router has the same host name as the local USB printer that is connected to the Mac which seems strange to me.
G5 Mac OS X (10.4.8)

thx, i came a step closer now:
i had to choose Internet Printing Protocol using HTTP and enter the device URL (http://...)
When i now try to print i get the message: "printer in use; new try within 10 seconds" but it cannot start printing. Any clue?
G5 Mac OS X (10.4.8)

Still cannot print via Moto Print Server after 10.4.3

I just sent this message to Apple via their Feedback page:
I have an older HP 5MP laser printer which is very reliable and has plenty of usefull life left. It has a parallel port and an Apple port. The new G5 tower I bought does not accept either of the printer's connections. I installed a very useful Motorola SBG1000 Internet Gateway device that includes a cable modem, ethernet router, wireless router and a printer server which allows me to continue to use the HP 5MP.
When I got the G5 all I had to do to use the print server was to plug it in and empower it using a browser page which access the controls of the SBG1000. When I would print from any application, the printer dialog box would refer to the SBG1000 as the printer name.
When I installed the latest update to 10.4.3 I cannot print to the HP at all. In Classic Mode, the Chooser can see the SBG via Appletalk but I can't figure out how to empower it from within Tiger.
I also have an epson PhotoStylus printer attached to the G5 by USB. It works fine and I can control it from the desktop printer application. However I still have many text only, black and white documents that should be printed on the HP 5MP.
What can I do to get this working again?
Thank you!

Problem resolved!
The Help Desk at Motorola assisted me to reinitiate the AppleTalk definitions using the browser-based interface with the SBG1000 gateway. All I had to do was to follow the add a printer steps and I was back in business!
Unfortunately, the next day I had a major hard-drive failure so now I am hosed again for a while. My G5 is in the shop to see if they can recover the drive's data.
I usually spend the day after Thanksgiving doing back ups and system maintenance but I couldn't get it to boot up.
Tried zapping PRAM, reset the memory management unit, reset firmware and ran the Disk Repair utility 4 times. Bummer.

LaserJet P2055DN - will not print via network

Set up the printer last night as a network printer (replacing an older LJ 2300dn). It would not print a test page. To verify that the printer was good, I loaded the drivers into my laptop and connected via usb. Was able to print a test page via usb. Disconnected usb and reconnected network cable. Released and reset ip address. Verified ip address by pinging from host. When I ping the printer I loose usually half of the packets. There are two other HP printers on the network, a P2015dn and a LJ color 2605dn. Pinging their ip address returns 100% with a ttl=255. Pinging the p2055 produced 4 packets sent, 2 packets received, 2 packets lost, ttl=64 on the 2 returns. I have changed cables to the printer and interchanged ports on the network switch (verified the ports on the network switch by printing to the LJ 2605) with the same result. I cannot get the internal web server to come up, or it partially displays, or combinations of the above. If this had the older style removable print server like in my lj2300, I could swap it out, but it doesn't look like I can do that with this model. When I send a test page to the printer, it displays "printing", the green light on the top is flashing, the activity light on the network card is flashing, but nothing happens. Eventually, I get a "this document failed to print' notification on the host, but the printer still indicates "printing" and the lights are still flashing. Anyone have any ideas? I think I'm looking at a bad network/print server card in the P2055.
This question was solved.
View Solution.

I also had problems printing via the network to hp p2055dn. There was no problem printing via USB. All network settings were ok. Can ping, etc...
Many days of wrangling, finally found that the Network Config.Security had to be Reset on the printer's physical control panel.
Press Ok on the printer control panel --> press down arrow, you get to Setup Menu Network Config --> press Ok --> A number of down arrows down you get to Network Config. Security --> press Ok --> you have two options - Keep or Reset --> Choose Reset........ Network printing should be working fine.

Cannot print via AirPort Express

I bought Airport Express a few days ago and have connected the ethernet cable and have wi-fi running. However I cannot print wirelessly (the printer is connected to AirPort Express via USB) and everytime I try it fails to locate the printer. This is because the settings are old (I used to hav my iMac as a base station but now the printer is not connected to the iMac and is now connected to AirPort Express). Could somebody tell me how I can fix this problem.
Thank you in advance

Thomas I did find this on HP's Web site. But beside this you may want to look for other (GIMP printer drivers that may accomodate the wireless compatibility).. HP does state:
Is my All-in-One product supported via the Rendezvous/Bonjour protocol?
NOTE: Bonjour is the new protocol for Mac OS X v10.4.
ANSWER:
HP does not offer support for any All-in-One product via Rendezvous/Bonjour, however some products might work when plugged into an Airport Basestation via USB. These products might work with the print functionality only. See the list below for such products.
PSC 1100 series
PSC 1200 series
PSC 1310 series
PSC 1350 series
PSC 1600 series
PSC 1400 series
PSC 1500 series
PSC 2100 series
PSC 2170 series
PSC 2200 series
PSC 2300 series
PSC 2400 series
PSC 2500 series*
PSC 2600 series*
PSC 2700 series*
Officejet 4100 series
Officejet 4200 series
Officejet 5500 series
Officejet 6100 series
Officejet 6200 series
Officejet 7200 series*
Officejet 7300 series*
Officejet 7400 series*
LaserJet 1220
LaserJet 3200m
LaserJet 3030
LaserJet 3300 series
NOTE: Printers marked with an * have built-in networking allowing them to connect to an Airport via either Ethernet or 802.11b wireless without the need for a USB connection. These products also have full functionality when connected via one of these connection types.

Trying to print via wifi to epson stylus color 740 but can't

Hi all,
I am trying to set up my just purchased PowerBook g4 to print via airport wifi to an epson stylus color 740. I have been printing to this printer from my old laptop without any problems but I forgot how I set it up. It had something to do with lpt1 protocols. Is that IP address setup? I am now trying to set it up through OS X 10.5.4 and the other laptop has OS X 10.3.9. The dialog box is a little different and gives me many options for connecting. Which one do I use? The printer is hard wired to my SMC router which is connected to my g4 tower.
I got as far as trying to print to the printer but it would say it was sending then says the printer is paused when it isn't.
On my Titanium g4 the settings are:
printer name: lpt1on192.168.2.1 on 192.168.2.1
location: unknown
queue name: lpt1on_192.168.2.1_on192.168.2.1-1@g4tower
host name:g4tower.local
These settings are working not only for the Titanium g4 but for 2 other IBooks in the house. I just don't know where to put the settings in Leopard.
Thanks for any help,
Model Name: PowerBook G4 15"
Model Identifier: PowerBook5,2
Processor Name: PowerPC G4 (1.1)
Processor Speed: 1.25 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.7.1f1
Message was edited by: Claire Thomas
Message was edited by: Claire Thomas

Generally, there are two issues. First, you must know which paper to select, and second you must specify a feed-method that allows the paper you want to be in the list.
Second thing first, as it's more tricky.
The paper selection in the "Media Type" drop-down of the Epson 3880 Print dialog (the second print dialog presented when printing from Aperture) is limited by the selection you make for "Paper Size" in the Printer section of the Aperture "Print" dialog. To get "Fine Art" papers to show (and be selectable) in the Media Type drop-down, you must specify a Paper Size that allows those papers. Anything marked "Manual" should suffice.
An example will be helpful . I print most of my work on Epson's Hot Pressed paper, which I purchase in boxes of sheets. If I am printing to 8 ½ x 11 inch sheets, I do the following:
In Aperture, in the Printer section of the Print dialog, I select "US Letter (Manual - Rear)":
(This is the key. Selecting "US Letter" will not allow me to specify the paper I want.)
When I click the button "Print", another Print dialog opens. This one is specific to the printer (in this case, the Epson 3880). In that dialog, I specify for "Media Type" on the "Basic" tab of the "Printer Settings" tab of the "Print" dialog "Hot Press Bright":
This shows in the drop-down menu, along with other papers which must be fed manually:
I hope that helps. Non-Epson papers should come with instructions telling you the paper to select. For instance, I also print to Hahnemühle Harman low-gloss papers. These specify that I select "Ultra Premium Photo Paper Luster", which I do:
In the above dialogs, you can see that I have created printer presets for the papers I regularly use.
—Kirby.

Mavericks 10.9.5 upgrade - cannot print via wifi anymore

I upgraded Sept 20th to Mavericks 10.9.5 and now I can no longer print via wifi to my Epson XP-410. I tried uninstalling/reinstalling drivers and utilities, rebooted the printer, rebooted the computer, etc. I then tried printing via USB cable and that worked fine so its just the wifi printing. My other computers (windows 7 and OS X 10.7.5) work fine.

Unfortunately this didn't help me. I had already uninstalled the Epson software/drives and so ran the disk utility repair permissions twice -- once with the Epson driver/software uninstalled, then reinstalled the Epson drivers, and then ran repair permissions again. I rebooted and repeated the driver install & repairs but nothing works. Basically when I get to the Add Printer screen (either via in the install steps or manually in the System Preferences -> Printers & Scanners screen, the printer never shows up in the list to select and add. Next time I'm not upgrading my OS; I should have known better as I've learned with my iPhone and iPad that all those upgrades do is break my working devices . I still never resolved those issues so am unhappy right now with Apple.

Printing via Network USB print server suddenly not working any more

I have always been able to print with my USB
printers connected through a small, pocket-sized Keyspan USB Print server, Model US-4A, very easily and seamlessly, - until the very latest update to Snow Leopard.
This server is connected to my router and the rest of my in-home Mac network by means of an ethernet port, and it has four USB device ports, 1 each for my various printers and a flatbed scanner. It worked well under OS 10.6 until just now.
Now, all of a sudden, though the server hardware can still easily "see" and connect to
the printers, when I actually hit 'PRINT', then the Mac OS
print dialogues are showing some of the printers as "offline." They show up as 'unavailable' in the dialogue where you choose which printer to print to and the print dialogue boxes show the print jobs cused but then report - 'printer offline'
When I bypass the print server - and connect the same
printers directly to the Mac's USB ports, they print fine.
It suits my setup to be able to continue printing via the print server, however, and I am wondering what sort of new issue could now begin fooling the MAC OS into thinking printers are not connected when it has had no trouble with the same print server and exactly the same physical connections previously ?
I've already tried 'deleting' and uninstalling the printers and then reinstalling, and this attempted fix does not work.
Any suggestions here ? Is this a known issue with 10.6.3 ?
What has happened to suddenly bring this about ? Any ideas ?

It appears that 10.6.4 has essentially broken the US-4A usb server. Keyspan's (now Tripp-Lite) response is that the latest driver is for 10.5.x and Snow-Leopard is still not supported. (1 year after 10.6.0 was released to the public). In fact, their response is that they do not even know if they will continue to produce the US-4A. Note that the U2S-2A (2 port USB 2.0) server does not support 10.6 either. Shame on Tripp-Lite for continuing to advertise, and sell a product that does not work with the current version of OS X.

Printing photos on the epson r300

o.k. I have an epson r300... From i-photo I tried to print a 5x7 and got a 2x3 instead. the settings are on us letter, standard and the 5x7 is also selected, with one print per page, on print page. But everytime i try to print it gives me a stinking 2x3 instead...after banging my head on the counter a few times i decided to post this and see if anyone has any answeres to this dilema???? thnx dan

Dan:
Give this a try. I works for the R200 and should for the R300. Just change 4x6 to 5x7 in each step.
Steps for printing 4 x 6 prints from iPhoto:
crop the photo to 4 x 6 beforehand in iPhoto.
in Page Setup select your printer, proper page orientation and 4x6 or 4x6 borderless
click once on the picture you want to print to make sure it's selected.
now click on the Print button in iPhoto.
in the iPhoto print window, select your printer again, select Style = "Standard Prints", Size= 4x6 and click on One photo per page.
click on the Print button.
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, Mac OS X (10.4.6) 22 LCD Display, 200G & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200

No borderless printing; cannot print via imagebrowser...Please...help!

I can no longer print 4x5 borderless photos (or any photos) from imagebrowser to my i850 canon printer. I have version 6.0.2.38(7L) of Imagebrowser with Leopard installed on my Mac. I select the print option, and then it says to click on Page Setup for borderless printing. The only option I get there is 4x6 (with a border)??? There is no 4x6 borderless like I used to have with the old imagebrowser and system. I set up the print dialogue box to select the "best" picture (used to have a setting for high quality pictures???) and then I click on "Print" and nothing happens. It never goes to printer and I can't cancel or anything. I have to do a force quit. How do I just print a 4x6 borderless print using Imagebrowser on my Mac??????? Any help is greatly appreciated and thanks in advance!!!

Gary Schnetter wrote:
I am not sure where to look for these drivers.
Both the Canon v4.8.3 and Gutenprint v5.1.3 are included with Leopard
I went to the Canon web site and downloaded the latest driver v4.8.3 and it put it where it needs to go but doesn't tell you where that is.
It would try to copy them to /Library/Printers/Canon/BJPrinter, but since the same files for this version would already there be, it might not do this unless the file being added are newer. It should also copy the package installer for the 4.8.3 to /Library/Receipts.
Anyway, when I went back into Imagebrowser I now have a much shorter list of options, plus do have the 4x6 borderless now. I click on Page Setup in Imagebrowser and select this, but when I go out of there and click on "Print" absolutely nothing happens. I still can't print from Imagebrowser. I use Quarkexpress and can print on plain paper fine so I know the printer works, but cannot print from within Imagebrowser for glossy prints. Any ideas what I may need to do?
Not really. I used v6.1 in my testing. Maybe your v6.0.x has a problem with 10.5. Also, if you upgraded from Tiger to Leopard and didn't do a clean install of ImageBrowser, then maybe this is causing the failed printing.
You mentioned you can print on plain paper from Quark. Can you print on plain paper from ImageBrowser?
My last suggestion would be to view the cups error log. With the i850 printer queue open, select Printer then Logs & History. This may give some clues as to why ImageBrowser is not working for you...
PaHu

Cannot print via network on Epson R300

Similar Messages

Maybe you are looking for