Cannot print w/ HP printer connected USB to wireless Ericsson W35 wireless modem

I have a HP P1005 Laserjet printer that is connected threw USB to a Ericsson W35 broad band modem.
For some reason i can't get my MacBook Pro 13" to print.
I would love to get help, HP and Apple can't help!!!!
I guess i'm stuck in a loophole....
Thanks to all....

Hi
Try setting up the wireless by going to the link given below;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02894181&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Regards

Similar Messages

Cannot print on usb after maverick upgrade

cannot print on usb after maverick upgrade

Chef jonathan wrote:
apple when will I beable to print?
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.
Apple involvement. Apple may respond to questions but does not formally provide technical support on the Site. Any information that is provided by Apple or Apple employees is offered on an "AS IS" basis without warranties of any kind.
Ask your question in the Product Feedback area. Otherwise...............
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

Connecting WRT54g to Wireless Modem

I am having a hard time. I have always had me WRT54G hardwired with the internet, but now my new service provider told me that I had to hook up their modem to the phone line an use their wireless modem (Motorola 3347). Now when I initially set it up and hardwired the modem and the router together my internet worked. Now I seperated them and I cannot get the WRT54G to see the modem. It isn't acting like a wireless modem.
What am I doing wrong?

To get your WRT54G router to work with the wireless modem is to get a Third party firmware , Like the DD-WRT firmware which has a feature that you can use to connect to the wireless modem , I have the same modem & I have used the dd-wrt firmware on two wrt54g routers , ver 3 & ver 8 , they have been working with the modem & I have had no problems yet. the feature of the dd-wrt firmware is a Repeater Bridge & It does work.

Having trouble with Airport connecting with Verizon wireless modem.

Having trouble with Airport connecting with Verizon wireless modem. Any ideas?

Haven't asked Verizon. I think it is in my settings for Airport. Need to know proper settings.

Cannot print remotely with new Wireless HP Officejet 4630

My old HP printer died last week, which is okay because I was in need of a new one. I chose the HP Officejet 4630 because it had the wireless printing option and was a 4-in-1. I work from home and I remote in to my office computer in another location. With my old hp printer, I was able to print but was connected with a USB cable. With this new wireless printer I cannot print from my remote location. I have tried a few times, restarted the computer and printer but it still does not print. I am able to choose my printer when I am logged into my work computer remotely. This is a big issue as I need to print reports at home from my computer at work. I am using Windows 7 and I've printed the wireless network test results which came back A-OK. Has anyone else had this issue and figured out how to print? When I look at the printer queue there is nothing...
Please Help!
Thanks

I just want to add that I am able to print wirelessly from my computer but not when I am remoting in to my work computer.

HT1178 Do I want to create a new wireless network or join my current network? I can't connect an ethernet cable to the Mac / printer and to the wireless modem at same time - in two different rooms.

I am trying to set up Time Capsule so that I can do my first backup (after 1 1/2 years!) with Time Machine. I have read other forums, but in each case they instructions eventually do not apply.
I have connected my TC to my existing wireless router. This sits in a bedroom and cannot be moved as a rental home.
I have plugged in the TC and updated the software.
Now - do I want to A Create a New Wireless Network (remember I can't connect the TC to Mac using an Ethernet cable). B Replace an existing base station or wireless router with TC (only intend to use for TM as don't know other benefits as of yet). or C want TC to join current network.
Thinking C. If I choose C, it then asks A TC to wireless join current network (NO as already connected using Ethernet). B want to connect TC to my network using Ethernet to extend my existing wireless network. C want to disable the wireless network on this TC and connect it to my computer or network using Ethernet - CANNOT do this as devices can not be in the same room.
Or do I want to create new wireless network - first set of questions - choice A? What is the benefit to creating a new one when I won't be in this rental house for longer than 18 more months??
Please help and quickly! Thanks!

Let me suggest some things.
But first ask exactly what wireless router you have now and what type of broadband service?
Are you happy with the wireless on the current router? If so, then you can plug the TC straight into whatever computer you have by ethernet, short 1M cord with no connection to the network. And use it without affecting your existing network at all. This is trivial setup.
Although you don't say exactly what Mac and printer you are using, is it a desktop? Laptop it is definitely easier not to plug it in, but a desktop you can plug in the TC and it will all sit happily together.
How is the printer connected and to what?
I am not sure why you need such quick help.. this is all minor setup stuff.. and 18months in todays world is like permanent man.
Your multiple A, B, C are more confusing than helpful.
The best choices without more info.. are to replace the existing wireless router with the TC. ie your option B.. but how to do this depends on the type of connection. Is it cable or adsl? Can you easily bridge the existing modem router.. if that is what it is?
Think carefully in the ideal world what would you like..
and what do you have..
We can probably suggest ways and means to fit what you like to what you have.. without introducing a stack of options that are doing your head in.

My 3050 J610 printer goes into standby or sleep mode and then I cannot print docs to it wirelessly

Everytime I do not print something for a few hours, my printer goes into standby or sleep mode. When it does this, it cannot be used to print from my laptop or android to it. Is there a way to set this up so that it doesn't "go to sleep" and it is always available to me to print with. I like the printer, but it seems kind of off that you cannot print on it wirelessly and it is considered a WIRELESS printer. That's the only reason I bought it and now I can't even use it without walking downstairs and turning the printer back on again. If I wanted to do that every time I would just print from my main computer!
Thanks,
Ashley
This question was solved.
View Solution.

Ok, I know this thread is a little old, but it would not allow me to start a new one, since I am new. I am having the same issues with my 3050 J610 as everyone else. It makes you think there is a wireless connection problem, but that is not the case. The printer goes into a standby mode and there is no way to bring it out of it, unless you cycle the printer. The panel buttons will still work, you just lose the ability to print wirelessly.
I have had my 3050 J610 in two different rooms, master bedroom and basement office. Both areas work well when it is connected and awake. After a while of inactivity, it goes into standby mode and cannot print wirelessly. Here are steps I have taken so far:
When the printer goes into standby and will not print wirelessly, I have check to make sure there is still a connection between the router and the printer - There is
I have set a static Id for the printer at .210
Cycling the printer brings the connection back instantly.
The front panel buttons work just fine when it does not have connectivity
In the basement, the machine has excellent signal and connection.
I have checked the recommendations in this thread, and like others, there are no options under the advanced tab of the maintenance page. The problem is a standby or sleep issue. When this arises, it has connection to the router, but the wireless computer does not have connection to the machine. I know when it was in the bedroom, the light would blink 3 or 4 times now and then throughout the night. We need a way to turn off the standby, or bring the machine out of standby mode. It is not an issue of the router, channel, interference, or software. It is the sole issue of standby or sleep modes. I have been pulling my hair out for almost two years over this issue. I swore I would not buy another HP product after the problems I had with a printer and laptop. But I thought I would give HP another chance.

How do I change my photosmart plus printer from usb to wireless

Could not get my wireless photosmart printer to connect to my computer and had to do it by way of usb hook up. I am operating win 7. How do I now convert from usb to wireless?

Hi,
What is your printer ? Please try this:
Click Start > All Program > HP > HP Photosmart {your printer} > Printer Setup & Software.
You should see a screen, select "Convert a USB connected printer to wireless"
Follow instruction from there.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cannot print from laptop, have wireless too

I have a printer J6400 and I have a laptop DV2000. I had my printer working for couple of years. Something change now i cannot print wireless. I had to plug my USB port in order to print. What happen? does it have somehting to do with software changes.

Your static LAN IP addresses have been set incorrectly. This is likely the cause for your problems.
With Linksys routers, a fixed LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the printer and in the NIC, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would need to be in the range of
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you have not changed the default DHCP server range.
Also, although your printer may need a fixed LAN IP address, it is unlikely that your computers need fixed addresses. Unless you have a specific need for a fixed LAN IP address for you computers, it is best to let them get an address from the router's DHCP server.
Message Edited by toomanydonuts on 01-18-200710:37 PM
Message Edited by toomanydonuts on 01-18-200711:07 PM

HP Officejet 6000 will not connect to new wireless modem.

I have Windows 8.1. My HP Officejet 6000 E609n wireless printer worked well, until the modem died and a new one was installed (new address). I need to know how to make it recognize the new network address. (Note: I tried to install the original setup software, but the CD would not run under Windows 8).
This question was solved.
View Solution.

Hi @indyham
Since we were able to get the printer on the network successfully, the following document will help address maintaining the connection; Printer Does Not Maintain Wireless Connection.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cannot print to USB HP Color LaserJet 3600N on Vista SP2

I had this printer setup and working fine until I nuked my laptop and reinstalled Vista Ultimate with SP2. When I connect the USB, the laptop connects as it makes the noise that it's connected. The printer shows online. I went through the wizard of adding and installing the proper driver that I downloaded from HP.
When I try and print a test page, all I get is "Error - Printing." That's it. No error in event viewer. Yes the printer is on. Yes it's the proper driver. Yes it's connected properly. Yes I have tried 3 other USB inputs. Yes the printer worked fine last week so it's not the printer.
What the heck is going on? I can print fine to 2 networked printers.

I had this printer setup and working fine until I nuked my laptop and reinstalled Vista Ultimate with SP2. When I connect the USB, the laptop connects as it makes the noise that it's connected. The printer shows online. I went through the wizard of adding and installing the proper driver that I downloaded from HP.
When I try and print a test page, all I get is "Error - Printing." That's it. No error in event viewer. Yes the printer is on. Yes it's the proper driver. Yes it's connected properly. Yes I have tried 3 other USB inputs. Yes the printer worked fine last week so it's not the printer.
What the heck is going on? I can print fine to 2 networked printers.

Cannot print to 8620 via wireless option on my network

I have 3 computers with Windows 7.   The printer works fine as a USB connnected printer.
the wireless set up works fine and gets an IP address from my wireless router (an old LinkSys, wireless G).
I cannot ping the printer.   It does not appear in the ARP table. I try to set up a wireless connection, but the software cannot find the printer.
Oddly enough, when I search for networks, I found that the printer was broadcasting as it's own wireless gateway. I can connect to it, but it has no internet connection.  When I try to add a new printer, the software finds the printer and lets me add it. I can then print wirelessly to it.   the IP address of this printer is different than what the HP software found when I did wireless set up, on a totally different subnet.
I doubt this is the way it is supposed to work, that you have to drop off of your own network to print to the Printers network.
Also, you can browse to the new IP address and configure everything.
Any suggestions on what to look for.   do I need to change something in my router?
This question was solved.
View Solution.

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue. My similar Officejet 8600 Plus is configured on the wireless network here. It does offer a direct connection (with a differetn subnet), but I do not connect to that, I simply use the printer as a netwerk printer. The diagnostics above should straighten things out.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Trying to change HP Photosmart 6510 printer from USB to wireless -

There is no statement to click on "Convert a USB connected printer to wireless" setting. Therefore I cannot switch the connection to wireless without this setting.

Hi
Try setting up the wireless by going to the link given below;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02894181&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Regards

Unable to connect wireless print server while using wireless modem to ISP

Unable to connect an HP Laserjet 1320 thru the JetDirect ew2400 External Print Server to an imac G5 that uses the 2WIRE352 modem for ISP access thru ATT. Either the ISP is connected and works, or the printer works but no internet access. HP (after 1hr 15 min.) said I need to change/access the "infrastructure" in the OSX. Is that correct? & if so, how do I do this? Do I need to hire Apple Tech Support to do this? How much will that cost. I'm ready to send the Print Server back to HP for a refund.

I would post your issue in the Printing & Faxing forum area. More chance for some of the gurus like Greg Sahli to respond.

Cannot print w/ HP printer connected USB to wireless Ericsson W35 wireless modem

Similar Messages

Maybe you are looking for