Cannot print with HP Laserjet 1022 when connected with USB to Time Capsule

Installed HP drivers
Connected HP 1022 (not the network printer) with USB to Time Capsule
Printer appears in "Standard" section of printers, marked with Bonjour
Correct driver is selected
When printing, printer appears to be connected. Printer queue shows the item being managed and no errors are posted. After a rather long time, the print disappears into the void. This goes for the test page too.
Connected the printer directly to my iMac with USB, no problems at all.
I would prefer to have it connected to the Time Capsule though...
Bjarne Havnen

Getting it to work with Windows is super-easy. You'll need to install the printer's drivers and Bonjour for Windows ( http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html ). Install both of those, open Bonjour, select the printer, done.
I have no experience with Linux, sorry.
Michael

Similar Messages

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

I cannot print to my photosmart 7510 when connected to work with VPN

When I try to print to my printer while connected to VPN, I get an error that the software could not communicate with my printer. The IT department where I work has configured the VPN so that traffic to my local LAN is allowed (does not go through the tunnel). I had no problem printing to my old printer when connected with VPN (old printer was a photosmart 2510 connected via wireless network).
These symptoms lead me to believe that the printer software is attempting to connect to the internet when I send a print job to my local printer. Why is it doing that? What settings do I need to change to make it stop so that I can print while connected with VPN?

But I don't understand why the internet connection that my printer has comes into play when I'm sending a print job from my PC to my printer over my local network. I am not using the web services at all for that particular function.
At least I shouldn't be - I don't know what the HP print software installed on my PC is doing under the hood. The software shouldn't have to access the internet to send a print job locally. Nor should my printer have to access the internet in order to receive the print job from my PC.
What exactly is the printer or the print software accessing the internet for when I send a print job from my PC to my printer over my local network?

Problem scanning from HP 1312 MFP connected via USB to Time Capsule

Hi,
I have a HP Color Laserjet 1312 MFP connected via USB to a Time Capsule. I can print through the Time Capsule without any problems but the HP Director software can't see the device hence I can't use the scanner on the device.
Please help!

If the scanning option is vital, just keep the MFP directly plugged into your Mac (via USB). Enable printer sharing via System Preferences. Note that the Mac does need to be on for the other machines on your network to print. If that's not an option, look into purchasing a USB print server to connect via ethernet onto your network.
Here is one:
http://www.linksys.com/servlet/Satellite?c=LProductC1&childpagename=US%2FLayout&cid=1115416942657&pagename=Linksys%2FCommon%2FVisit orWrapper&lid=4265722279L07

HP Laserjet 1022 not connect with AirPort Extreme

Previously I connected to my airport extreme with ethernet from my Apple Laserwriter Pro 630. I bought a HP Laserjet 1022 and it connects through the USB port. It does not print. I have installed the HP Laserjet through my Printer Set Up Utility with my MacOS X 10.4.9 system.
What am i doing wrong?

I've no personal experience with your particular printer but these pages may help you
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
http://www.ifelix.co.uk/tech/1013.html
Steve

External usb drive doesn't appear correctly connected via usb to Time Capsule

After using it successfully for months over my home LAN by connecting it via FW800 (and suing filesharing) to a stationary MacBook Pro, I'm attempting to connect a 2 TB Hitachi Deskstar 7K2000 hard drive (in a Rosewill quad-interface enclosure with Oxford semiconductor bridge chip) via USB cable to my third-generation Time Capsule. It is formatted as HFS+ with a GUID partition table.
It appears in Airport Utility and mounts correctly, but none of its folders appears. Have tried two different USB cables with the same results.
Any ideas as to what could be wrong?

So do I. I have a 350 GB Maxtor One Touch external harddrive. When I boot the mac, the drive doesn't show. And if I run the AirPort Disk Utility, it shows by name. But no matter what settings I chose, it doesn't mount and it says "No Disk Found" in the menu.
But here comes the interesting bit: If I turn off the harddrive, and turn it back on again, AirPort Disk Utility finds it. So I think the problem has to do with the harddrive spinning down and going into sleep-mode. For some reason it seems to become invisible to the Extreme-box when doing so. But if that's correct, what the heck do I do about it?

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

Printing interrupted (with HP LaserJet 1022)

Hello,
I've recently upgraded to Snow Leopard. Since doing so, my printer (a HP LaserJet 1022, bought with my Mac from Apple) has been working only intermittently.
If I print a document, from any application, of more than one page, it'll only print the odd pages and will stop some way through printing those odd pages and the lights on the top of the printer will start flashing red. (I have checked the settings and they're set to print all pages, not just the odd ones.) The only way to move on is to switch the printer off and on again.
This means that 1) I can only print one page at a time and 2) that every few pages or so, I have to switch the printer off and back on.
Does anyone know what's going wrong or what I can do to fix the problem? I thought the SL installer updated my printer driver.
Thanks, in advance, for your help.
Jonathan.

HP has simply abandoned the 1022 printer on Snow Leopard. For a time there was a HP software engineer posting here, gathering information from users, advising us that they were working on the 1022 driver. He even sent a beta driver to several people with specific problems. Then he suddenly disappeared and we haven't seen or heard from him since. My 1022 works fine with the Snow Leopard supplied driver, except for the manual duplex option which no longer exists. Others report that their 1022 only prints every other page or stops after a couple of pages. There is a very long thread here about the 1022 problems. The HP guy's name was Andrew but, as I said, he vanished. 1022 owners were starting to get testy and frustrated so maybe he just got tired of trying to help.
As for me, I will never buy an HP printer again because of this abandonment.
See this link for the original 1022 thread...
http://discussions.apple.com/thread.jspa?threadID=2176654&tstart=0
Message was edited by: lkrupp

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day!

Issue with 2wire dsl router when connecting power pc g4 via ethernet

Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
Let us know if you can't find it and we'll have a look.
If you afford it, bin the 2wire and go buy something decent like a Netgear.

My iTunes 10.4 will not open when connected with my iPod Touch (v.4.3.5), however, it used to in the past- can anyone help me? Thanks.

I am curious as to why my iTunes 10.4 won't open when connected with my Touch (v.4.3.5). iTunes used to open when connected with my Touch. Can anyone help me? Thankyou.

I have got a solution, it was shared on another 'apple support coummunity' board:
https://discussions.apple.com/message/15830348#15830348
It worked for me

IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use,
3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
4. After 5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

"I get the feeling that this is a software issue that could probably be solved quite easily"
Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
!http://i50.tinypic.com/izvwo1.gif!

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.

I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged

When replying to an add on Craig's List, for example, it goes back to my old email address I had with IE, and fails to connect with the ad's author and I'd like to know how to make it use my gmail address with Firefox instead.

When replying to an ad, via email, posted on Craig's List , for example, it attempts to use my old email address I had with IE, then fails to connect with the ad's author. How do I get it to only use my gmail address with Firefox?
== This happened ==
Every time Firefox opened

See https://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

Cannot print with HP Laserjet 1022 when connected with USB to Time Capsule

Similar Messages

Maybe you are looking for