Cannot print with HP Laserjet 2200 on network

I run software update periodically and downloaded the HP driver update when it was offered.
I uninstalled the Laserjet 2200 that worked with 10.5.8 in the print and fax system preferences and reinstalled it. It is recognized and I get the correct image for the printer, but when I try to print it pauses, I resume printing and it thinks a little and pauses again.
I chose the Laserjet 2200 printer driver, but it does the same with a generic printer driver and the offered alternative Gutenprint driver.
Other users on the network running 10.5.8 have no trouble printing to this printer.
Thank you

Getting it to work with Windows is super-easy. You'll need to install the printer's drivers and Bonjour for Windows ( http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html ). Install both of those, open Bonjour, select the printer, done.
I have no experience with Linux, sorry.
Michael

Similar Messages

I need help printing with HP laserjet 2200 and OS 10.6

I need help setting up my HP laserjet 2200 and OS 10.6 -- I've downloaded and installed all the software and still can't print.

Hey jeo1951,
If you haven't already, try running through the recommended steps in the following article:
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
It should help you set up your printer.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Cannot print with HP Laserjet 1022 when connected with USB to Time Capsule

Installed HP drivers
Connected HP 1022 (not the network printer) with USB to Time Capsule
Printer appears in "Standard" section of printers, marked with Bonjour
Correct driver is selected
When printing, printer appears to be connected. Printer queue shows the item being managed and no errors are posted. After a rather long time, the print disappears into the void. This goes for the test page too.
Connected the printer directly to my iMac with USB, no problems at all.
I would prefer to have it connected to the Time Capsule though...
Bjarne Havnen

Getting it to work with Windows is super-easy. You'll need to install the printer's drivers and Bonjour for Windows ( http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html ). Install both of those, open Bonjour, select the printer, done.
I have no experience with Linux, sorry.
Michael

Cannot print with HP LaserJet P1006

I've installed the latest print drivers from HP (1.0.6) and still the LaserJet P1006 driver doesn't appear when I try and pick the driver. I have verified that /Library/Printers/hp/laserjet/HP1006/ exists and has the following files in it:
drwxrwxr-x 3 root admin 102 Jul 1 04:42 HP1006PDE.plugin
drwxrwxr-x 3 root admin 102 Jul 1 04:42 HP1006PM.plugin
drwxrwxr-x 3 root admin 102 Jul 16 15:07 hp LaserJet Utility.app
When I try using other LaserJet drivers nothing prints and I see DoIOTrandfer error 0xe0004051 errors.
Any ideas?

Have you had any luck getting the P1006 to work? I'm in a similar situation and I haven't found anything that works. I'm trying to install on a MacBook running 10.4.11. I've tried both the 1.0.4 and 1.0.6 versions of the drivers with no effect.
The printer is showing up in the Printer Browser window, but it's not showing up in the "Print Using" drop down menu.
I tried a manual uninstall and a clean reinstall. Didn't work. I did noticed in the uninstall instructions on HP's website that the file /Library/Frameworks/libZJBIG.dylib is shared with several other printers. The uninstall instructions say not to remove this file if you use these other printers. I don't, so I went to delete it. But upon checking, I found that the p1006 installer hadn't installed it. I thought this might be my issue, so I installed the drivers for one of the other printers that share this file. I now have libZJBIG.dylib, but still with no results.

Cannot print with hp 2600n through network

I installed Leopard on my two month old Imac(latest model) with no real glitches and thought all was fine until I tried printing with my HP color laserjet 2600n through my network.
I get my network showing up as guest sharing(not logging me in under my name) and even though I could print fine with Tiger, I cannot print with Leopard. The request shows up in the print queue but does not print.
Any advice would be appreciated. I was never prompted before for a password everytime I printed and was always logged in to my network and not a guest sharing before. I know I'm missing something here but everything else transferred over fine from Tiger but the printer is a mystery.
Thank you for any help,
Nathan
Message was edited by: nlsdds

Try resetting the base station that your printer USB is plugged into.
Worked for me with an Airport express
http://docs.info.apple.com/article.html?artnum=107418

How to print on HP LaserJet 2200 over Ethernet?

Hi,
I did an upgrade to Snow Leopard and would like to print on a HP LaserJet 2200 over Ethernet. OS X and the HP printer drivers are up to date now.
The printer has been cold reset and on the configuration print out there's the IP address 0.0.0.0
Now my question is how to get this printer to work with Snow Leopard over Ethernet? I did not find a tutorial how to assign an IP address to the printer first so I got stuck.
Could you give me a hint where I should start with the configuration first?

OK, now the printer works
I reset the router and checked if DHPC is running.
I reset the printer (hold down the GO button, turn the printer on and continue to hold the GO button for five to ten seconds).
Checked at router that the printer is visible as network device.
At the router I assigned a fixed IP address to the printer.
At OS X System Preferences > Printer I added a new printer with "HP Jetdirect - Socket", the fixed IP address and the correct printer driver "HP LaserJet 2200".
Now the printer has been recognized well by the system (Tray 3, Duplex and printer RAM) and printing works.
THANKS.

AutoCAD 2009 crashes when printing with HP Laserjet CP1525nw via wireless connection

Printing to CP1525nw via wireless connection crashes AutoCAD 2009 on a WIndows 7 Home OS + Sony VAIO VPCL21M1E
Works fine printing from any other application.

I'm facing the same problem but, i'm AutoCAD 2012 and it crashes when printing with HP Laserjet CP1525n via USB or network cable

Can not print with HP LaserJet 6L since the upgrade to Mavericks.

Can not print with HP LaserJet 6L since the upgrade to Mavericks. Any alternative driver for this printer?

I have an HP LaserJet 5P and had the same problem. My LaserJet is connected to a D-Link ethernet print server, then to an Airport Express to support wireless printing.
As recommended in earlier posts, I first downloaded the Gutenprint HP drivers at Sourceforge, version 5.2.9 That did not work. Then found the reference to the Apple kb here: http://support.apple.com/kb/dl907
Downloaded these drivers. When setting up the printer, I got the autoselect option for Generic Postscript Printer and used that. Printer worked, but printed out garbage. I then deleted the printer, and this time selected the HP LaserJet 5P CUPS + Gutenprint v.5.2.9 THAT WORKED! I don't know if was the combination of downloading the drivers from Sourceforge and the Apple kb, or just the Apple kb that solved the problem, but I'm glad this is now sorted.
I was a bit surprised when I hit this snag to begin with because the last upgrade I did from Lion to Mountain Lion, I did not have this issue. It was seamless.

Cannot Print with Acrobat Standard X

One of my clients is running ACROBAT X Standard on Windowes 7 64-bit.. She cannot print any PDF using Acrobat to any printer. Print jobs never reach the queue. As a work around she muct convert to Word.
Printing as image does not help.
Saving a copy does not help.
I have applied al updates, repaired and completely removed and re-installed the product but nothing helps.
Also, the Printer Properties button and Page Setup buttons do not work. They are not disabled (greyed out), they just don't launch these functions.
I appreciate any help!
Charlie O
Plexus IT

Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
From: Sara.Forsberg <[email protected]>
To: Verla Adams <[email protected]>
Sent: Thursday, April 16, 2015 7:28 PM
Subject: all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Cannot print with Reader XI

I cannot print with Reader XI. It keeps telling me I have not marked any pages to print even though I have. I finally had to uninstall Reader XI and open the pdf file through Google Chrome. What's the point to having Adobe Reader at all?

Hi Robert,
Please try the solutions mentioned below -
Solution 1 :-
Repair Adobe Reader, Help (Menu) -> Repair Installation.
Solution 2 :-
Try to print as Image, Quick fix | Print PDF as image | Acrobat, Reader
Solution 3 :-
Update the printer driver, please refer to this KB doc. for the troubleshooting steps Troubleshoot PDF printing | Acrobat, Reader
Let me know if the issue persist.
Regards,
Aadesh

I have Mavericks installed. Cannot print with IPhoto because there are no themes

I cannot print with IPhoto because it says that I do not have themes. How do I install themes? JL

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Cannot print with Cannon LBP5000 and Timecapsule

So I've read that the Cannon LBP5000 is not compatible after all with Time Capsule. Due to the CAPT Driver being bi-directional. I do not accept this as a resolution and feel that Apple cannot simply push this aside. My reason for that is this.
I was printing fine, with both my MBP and Air via a USB cable to my Cannon LBP5000 - great.
I then decided to go wireless printing. And bought a HP 2101nw print server for £30. I could then print wirelessly - fab!
I then decided to upgrade my MBP to Lion. I then could no longer print on that machine. Air still fine - pants.
I then had to (for other support reasons) upgrade my Air to Lion, to fix something else. I could no longer print from their either - bugger.
After much passing of bucks and research, I found out the HP 2101nw driver is not Lion compatible, nor do Apple or HP have any intention of fixing that. I was told to discard that wireless print server for something compatible with Lion - cheers.
I then bought a 2TB TimeCapsule. And found I couldnt print from that either for the lame reason I quoted at the start.
If this print worked wirelessley with a £30 print server on Snow Lepoard, why is it acceptable for it to not work on a £249 device. The printer hasnt changed, but it seemed a £30 solution is able to handle this 'Bi-Directional' impediment where the mighty TimeCapsule gives up.
What a load of tosh - really, really unimpressed Apple. Take ownership and responsiblity for something for once and fix the exceptionally painful transistion you pushed us through with Lion.

Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
From: Sara.Forsberg <[email protected]>
To: Verla Adams <[email protected]>
Sent: Thursday, April 16, 2015 7:28 PM
Subject: all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Cannot print with wpa2

Printing is a snap with an open network, however when I imposed wpa2 on my apple extreme router,the printing stopped. I am running os10.6.2, macbook pro 5.3, 2.8 ghz, 8 mb ram. I can still print with other computers on my network NOT running wpa2. What is the barrier to my brother hl 5250DN network printer?

You may need to update your AirPort base station firmware to support WPA/WPA2 over WDS. (ref: http://docs.info.apple.com/article.html?artnum=107791)

Cannot print with the new OSX with my canon mp550 printer

I cannot print with the new OSX with my canon mp550 printer , it sais there is no available driver ..!! what to do ..?? does anyone have a solution ..??

OS X Mavericks: Reset the printing system

Cannot print with all-in-one

I cannot print with my all-in-one because I have a print-job in th queue, and when I attempt to cancel it , it simply will not cancel, but remains in the queue. I think this happened when I was printing from the internet and a nearby lightning stike disrupted the printing.

Have you tried to shut down the computer and printer and then turning them on again??

Cannot print with HP Laserjet 2200 on network

Similar Messages

Maybe you are looking for