Cannot print with just black ink with a epson 9600

The printer works great but I have a color tint i my greyscael images. I would like to print only usig the black inks. when I go to
print
print setting
Choose my paper type from the drop down
the ink  and color dropdowns are grey and inactive
i have tried photoshop manages colors as well as printer manages colors
i have reloaded the drivers
it works fine out of preview and lightroom
help please
Dan

Print mode should give you choice of Color or Black. Black means black ink only.
This will not give you a good looking print as it will be grainy and hard to control.
Consider using Quadtone RIP which will incorporate all needed colors to create a proper grayscale print with proper tones.
Quadtone RIP will probably offer the needed settings for this but it might require finding some files on the net.
Imageprint RIP is very good for this but is quite expensive.
Barry Rudick
Aker Imaging

Similar Messages

  • Why can't I print in just black ink?

    I keep being told my colour ink has run out. It is VERY expensive. Why can't I choose to print just in black?

    Please read this post then provide some details.  What printer model? 
    HP and other printer manufacturers have different printer technologies for different needs.  For inkjet printers:
    Some have printheads built into the ink cartridges.  These printers can typically print with one or more of the colors completely empty, or even with color or black (but not both) cartridges removed. The Deskjet 6980 series is an example, or for an all-in-one see the Officejet 8040.
    Other printers have separate ink supplies and replaceable printheads.  An example would be the Officejet 8600 series printer.  The printhead in these printers can be replaced if they are damaged by running the printhead with colors out.  Some of these printers will allow printing with a color out, other will not.  If the printer is run without ink in one or more colors the printer may be damaged, but the user may be able to recover without having to send the printer for service.
    Other printers have permanent printheads.  To run these without some ink in all the colors would risk causing damage to the printhead due to clogs, air ingested in the printhead or burned out printhead firing resistors. The Officejet 6700 is an example of this type of printer. For printers with fixed printheads this could require service to get the printer to print properly again when the ink is finally replaced.  
    The document here describes how ink is used.  While the document is written for HP Inkjet printers the same principles apply to inkjet printers from other manufacturers.
    If you never print in color a laser printer would likely be a better choice.  If you occasionally print color but mostly black an IPH printer like those in the first category above may be a good choice.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Cannot Print with my Epson Printers

    I am unable to print from my Epson 2200 (firewire) or 1270 (USB), though I used to have no problem. I have engaged Epson in my struggle to correct it, and they have finally "given up" on me. But I know several things from working with them over the past 2 weeks:
    -It is not the printers, they work fine.
    -It is not the cables or where the cables are connected. I have used both firewire and USB with the 2200.
    -The Epson Printer Utility only works sporadically. It mostly hangs up (multicolored spinning wheel) when I want to do a nozzle check, will not force quit, and even doesn't allow me to shut down computer. There doesn't seem to be a rhyme or reason as to when it will or will not work.
    -I have removed epson files and reinstalled drivers using OS 10.4 install disk.
    -When I go to print, the "job" shows up in the queue, but will not print.
    I Hope some genius out there has an answer.
    Thanks much.
    G-4 Dual Tower   Mac OS X (10.4.6)  

    I am having the same problem with my HP LaserJet 1200. It worked fine up until installing the new Security Update. I don't know if this is just coincidence, or not. I even tried printing from my pristine Test user account, and it also just shows a progress bar that keeps spinning, saying Printing Job, but nothing happens. Please help.

  • Cannot Print with Acrobat Standard X

    One of my clients is running ACROBAT X Standard on Windowes 7 64-bit.. She cannot print any PDF using Acrobat to any printer. Print jobs never reach the queue. As a work around she muct convert to Word.
    Printing as image does not help.
    Saving a copy does not help.
    I have applied al updates, repaired and completely removed and re-installed the product but nothing helps.
    Also, the Printer Properties button and Page Setup buttons do not work. They are not disabled (greyed out), they just don't launch these functions.
    I appreciate any help!
    Charlie O
    Plexus IT

    Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
          From: Sara.Forsberg <[email protected]>
    To: Verla Adams <[email protected]>
    Sent: Thursday, April 16, 2015 7:28 PM
    Subject:  all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
    all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
    created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Cannot print with Reader XI

    I cannot print with Reader XI. It keeps telling me I have not marked any pages to print even though I have. I finally had to uninstall Reader XI and open the pdf file through Google Chrome. What's the point to having Adobe Reader at all?

    Hi Robert,
    Please try the solutions mentioned below -
    Solution 1 :-
    Repair Adobe Reader, Help (Menu) -> Repair Installation.
    Solution 2 :-
    Try to print as Image, Quick fix | Print PDF as image | Acrobat, Reader
    Solution 3 :-
    Update the printer driver, please refer to this KB doc. for the troubleshooting steps Troubleshoot PDF printing | Acrobat, Reader
    Let me know if the issue persist.
    Regards,
    Aadesh

  • I have Mavericks installed. Cannot print with IPhoto because there are no themes

    I cannot print with IPhoto because it says that I do not have themes. How do I install themes? JL

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Cannot print with Cannon LBP5000 and Timecapsule

    So I've read that the Cannon LBP5000 is not compatible after all with Time Capsule.  Due to the CAPT Driver being bi-directional.  I do not accept this as a resolution and feel that Apple cannot simply push this aside.  My reason for that is this.
    I was printing fine, with both my MBP and Air via a USB cable to my Cannon LBP5000 - great.
    I then decided to go wireless printing.  And bought a HP 2101nw print server for £30.  I could then print wirelessly - fab!
    I then decided to upgrade my MBP to Lion.  I then could no longer print on that machine. Air still fine - pants.
    I then had to (for other support reasons) upgrade my Air to Lion, to fix something else.  I could no longer print from their either - bugger.
    After much passing of bucks and research, I found out the HP 2101nw driver is not Lion compatible, nor do Apple or HP have any intention of fixing that.  I was told to discard that wireless print server for something compatible with Lion - cheers.
    I then bought a 2TB TimeCapsule. And found I couldnt print from that either for the lame reason I quoted at the start.
    If this print worked wirelessley with a £30 print server on Snow Lepoard, why is it acceptable for it to not work on a £249 device.  The printer hasnt changed, but it seemed a £30 solution is able to handle this 'Bi-Directional' impediment where the mighty TimeCapsule gives up.
    What a load of tosh - really, really unimpressed Apple. Take ownership and responsiblity for something for once and fix the exceptionally painful transistion you pushed us through with Lion. 

    Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
          From: Sara.Forsberg <[email protected]>
    To: Verla Adams <[email protected]>
    Sent: Thursday, April 16, 2015 7:28 PM
    Subject:  all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
    all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
    created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Cannot print with hp 2600n through network

    I installed Leopard on my two month old Imac(latest model) with no real glitches and thought all was fine until I tried printing with my HP color laserjet 2600n through my network.
    I get my network showing up as guest sharing(not logging me in under my name) and even though I could print fine with Tiger, I cannot print with Leopard. The request shows up in the print queue but does not print.
    Any advice would be appreciated. I was never prompted before for a password everytime I printed and was always logged in to my network and not a guest sharing before. I know I'm missing something here but everything else transferred over fine from Tiger but the printer is a mystery.
    Thank you for any help,
    Nathan
    Message was edited by: nlsdds

    Try resetting the base station that your printer USB is plugged into.
    Worked for me with an Airport express
    http://docs.info.apple.com/article.html?artnum=107418

  • Cannot print with the new OSX with my canon mp550 printer

    I cannot print with the new OSX with my canon mp550 printer , it sais there is no available driver ..!! what to do ..?? does anyone have a solution ..??

    OS X Mavericks: Reset the printing system

  • Cannot print with all-in-one

    I cannot print with my all-in-one because I have a print-job in th queue, and when I attempt to cancel it , it simply will not cancel, but remains in the queue.  I think this happened when I was printing from the internet and a nearby lightning stike disrupted the printing.

    Have you tried to shut down the computer and printer and then turning them on again??

  • C5380 - I want to print using ONLY black ink cartridge. Is this possible?

    Hi Folks,
    I now understand that this model, HP C5380 and I'm guessing many others too, are programed to use an amount of colour ink even when selected to print in Black. 
    My question is:  Can I somehow program the printer to 'only print using the black ink cartridge' and not use the colour cartridges at all?
    I have heard that this is possible with some models but need the specifics.
    I am even willing to permanently disable the colour function if needed. The replacement ink catridges are so very expensive, if I'm unable to do this then I'll be looking for another printer and it won't be HP.  Thi is unfortunate because I think they make a good quality product - however they need to be on notice that their customers 'good will' and return business will not be forthcoming when they (and other compaines) continue to use money making strategies like this. 
    Many Thanks in advance for your time, B

    Hi berni7 ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • When I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines

    when I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines

    Hi Vickey, S,
    Sorry for the delay in response. Is it happening with all the files?
    Also, please write the steps you are taking to type in the document.
    You might try uninstalling and re installing the Reader in case it is happening with all the files.
    URL to install the Adobe Reader is Adobe - Adobe Reader download - All versions
    Thanks,
    Vikrantt Singh

  • Can I print in just black and white from my iPad to an hp5510 photosmart printer?

    Can I print in just black and white from my iPad to an hp5510 photos mart printer? 
    It seems ePrint is no longer available and now forced to use HP Connect. I am not seeing the option to print in black and white. Printing email messages in color is a waste of ink. Any help would be appreciated.
    Thanks

    I was using ePrint however that is auto-directing me to HPConnected and I no longer have the option to change the printing options to Black and White or Color. This is a recent change for me.
    banhien wrote:
    Hi,
    Yes, you have to use HP Connected now. Do you use AirPrint or ePrint ? ePrint allows you to select Color or Grayscale under Color mode (note: Grayscale ALSO uses color inks).
    Regards.

  • How do i get the 8600 to print in only black ink?

    How do I set the HP Pro 8600 Plus to print only in black ink?  I have tried  the "enable" option for black ink only under Preferences/Advanced but it doesn't seem to work.  Still keeps printing in color.
    This question was solved.
    View Solution.

    Did you set the Grayscale option to Black Ink Only?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HP DeskJet Ink Advantage 1515 printer wont print after replacing black ink cartridge

    Hello.
    My HP DeskJet Ink Advantage 1515 printer has been working correctly since a year.
    I had to replace both ink cartridges and I changed only the black one since I needed that one most. 
    But, the lights keep flashing and the printer wont print. Please help?

    Hi @RRGS,
    Welcome to the HP Forums!
    I see that your HP DeskJet Ink Advantage 1515 printer will not print after replacing black ink cartridge, and your lights are still flashing. I am happy to help!  
    What lights are flashing on the printer?
    In the meantime, please see this guide, Blinking Lights on the HP Deskjet 1510 and Deskjet Ink Advantage 1510 Printer Series.
    Hope this guide helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for

  • Fiscal year 2010 Not allowed while creating Process order in COR1

    Dear Friends, We have gone SAP live in the month of October. The fiscal yeat we are using is 2011 as the client is Indian client. I have made the fiscal year variant for 2011 (V3). The FI document posting with Fiscal year 2011. It is also creating th

  • Oracle Rdb JDBC: Insufficient global memory

    Environment: IA64 OpenVMS 8.3 Java RTE version 1.5 Oracle RDB version 7.2-2 SQL/services version 7.3 JDBC server for RDB version 7.3 JDBC-Thin driver version 7.3 The problem: we have a JDBC dispatcher with 20 executor processes. We have a client appl

  • Can we Debug an AuditReport for a pissed off customer HUGE BUG IN IDM AUDIT

    Daily and Weekly Audit Reports return java.lang.NullPointer exception Error message. Unsurprisingly the customer is unimpressed. I find it impossible to find any documented method to trace what is happening once we fill in the form and start the Audi

  • TACACS+ Server not logging events.

    Hi all, I am having an issue with the tacacs+ server not logging login requests or commands entered. I am running the tac_plus.F4.0.4.alpha release that cisco provides for free on a mandrake 10.1 linux box. I am able to use the server to authenticate

  • Poolable exception IN OAF

    HI All, I am working in R12 when i am running one custom page from jevloper it is giving strange error can any one help me to resolve this i think one profile option is there to resolve earlier i done like that i for got that profile option can any o