Cannot print without the GRID showing thru...

Apparently there is no way to print an imported Excel Sheet without the GRID.
Every sheet is imported as a single table with it's GRID showing up as a visible border. Simply, it does not recognize the difference between a GRID and a BORDER.
The only way to get rid of the GRID, is to completely reformat the document by taking out all BORDERS and applying new ones.
That will not work! No one is going to spend time reformatting a document that works perfectly in Excel.
Until this is solved, Numbers will seldom be used.

I have a 20 tab excel workbook with several printed pages on each tab that I work with regularly. It has many text boxes, borders thicknesses,and hatches. It imports just fine into numbers with a little tweeking of content scale to get it to print one page wide. I tried cahnging the color of the cell borders to white and cell borders to none. Guess what? It takes out ALL the fancy ones as well.
I am printing and submitting these sheet to a government facility and they are not complaining (so far) with ghost grid lines, But it sure would be appreciated to have more control over the printing of these unneeded gridlines.
I really don't want to recreate the whole thing and am trying to abandoned my addiction to excel all together.
Message was edited by: KrrP
Message was edited by: KrrP

Similar Messages

Acrobat xi - RE: Add sound icon- skin displayed is a 'blank white box' until it is clicked to activate it- can you lock skin to display before its activated so that in a print run the skin shows up (ie the controls-or any kind of greyed out rectangle, lik

Hi,
Acrobat xi - RE: Add sound icon- skin displayed is a 'blank white box' until it is clicked to activate it- can you lock skin to display before its activated so that in a print run the skin shows up (ie the controls-or any kind of greyed out rectangle, like video controls before 1st activation) and not the blank white box- if no, I guess I have to activate all sound icons before doing a print run?thanks)).

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

I have a full screen and cannot see my bookmarks.
How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

Cannot print from the GIMP

I have GIMP 2.4.2 installed on 10.4.11 on a PowerMacG5 2.5 and it is running ok so far, but I cannot print. No printers show up in the print dialog. However, printing from OpenOffice works fine and I can see all my printers. Is there any way to get printers to show up in the GIMP?

Try This!
1) Go to Print Preview
2) Print
3) Name: HP PSC 2100 series (depend on your printer)
4) Properties...
5) Paper size: letter
6) Change to Paper size: A6
7) OK
8) Repeat step 4 again
9) Change back again Paper size: letter
10) OK
11) Don't print, but go back to Print Preview again and see if it works
This is the one that have work for me after trying several times modifying about:config with no success. Good luck and hope that will help.

When I try to print a photo from iphoto, I select the photo, click print and the preview shows there is a lot of the photo cut off. It also prints this way. How can I print the whole picture?

When I try to print a photo from iphoto, I click print and the preview shows a lot of the photo cut off. It also prints this way. How can I print the whole photo?

After selecting File > Print, a pop-up window should appear. Select "Customize" and this should take you back into a panel within iPhoto. Towards the bottom, you should see an option for "Layout". Select this option and choose the correct photo orientation.
Hope this helps!

How to setup a canon ip2600 printer without the cd?

how to setup a canon ip2600 printer without the cd?
Solved!
Go to Solution.

Hi Santana,
The drivers for the PIXMA iP2600 can be downloaded from the Canon USA website. The following link will take you to the initial download page for your PIXMA iP2600:
PIXMA iP2600 Drivers and Software page
Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click the printer driver file. When you do, another page will appear giving details of the file you are about to download will appear.
3. Please scroll down on the Details page and agree to the terms of the disclaimer message to continue with the download process by clicking on the "I AGREE - BEGIN DOWNLOAD" button. After clicking the "I AGREE - BEGIN DOWNLOAD" button, follow the instructions to download and install the driver. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do i install HP deskjet 3510 printer without the disk to my laptop

how do i install HP deskjet 3510 printer without the disk to my laptop

Hi,
You can download from the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...
Full Feature Software and Drivers is the one you definitely need first.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work

I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work?

Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
Hold down the Sleep/Wake and Home buttons for at least 10sec. or until Apple logo appears (Nothing will be lost, this is just a "Hard Reset")
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704

How does one use the middle and right buttons in AIR without the cursor showing?

All I want to do is use all three botton clicks without the cursor showing (assistive technology situation). So I use Mouse.hide(). All works fine with the Left mouse button. With the middle and right buttons the cursor reappears as soon as the middle and right mouse is in the DOWN state (and stays visible until rehidden--see code). Are there Mouse parameters that could be added? (I can't find any such references.) Do I need to create a custom cursor Class that makes the cursor invisible at all times? Here is my simple AS 3 test code.
// MyClickListener.fla
// Using the Stage to listen for button events
// Why do the Middle and Right clicks reexpose the mouse cursor as soon as the DOWN state is encountered?
import flash.display.DisplayObject;
import flash.events.*;
import flash.ui.Mouse;
            Mouse.hide();
            var leftClick:int = 0;
            var middleClick:int = 0;
            var rightClick:int = 0;
function leftClickHandler(event:MouseEvent):void
            // Mouse.hide();   // I do not need this -- mouse cursor does not reappear
            trace(event.target.name);
            trace("You pressed the Left Button.");
            leftClick ++;
            trace("Left Clicks = " + leftClick);
function middleClickHandler(event:MouseEvent):void
            Mouse.hide(); //I use this to rehide the mouse that reappears after click.
            trace(event.target.name);
            trace("You pressed the Middle Button.");
            middleClick ++;
            trace("Middle Clicks = " + middleClick);
function rightClickHandler(event:MouseEvent):void
            Mouse.hide(); // I use this to rehide the mouse that reappears after click.
            trace(event.target.name);
            trace("You pressed the Right Button.");
            rightClick ++;
            trace("Right Clicks = " + rightClick);
stage.addEventListener(MouseEvent.CLICK, leftClickHandler);
stage.addEventListener(MouseEvent.MIDDLE_CLICK, middleClickHandler);
stage.addEventListener(MouseEvent.RIGHT_CLICK, rightClickHandler);
Help appreciated.
Thanks,
Michael
Message was edited by: MBM111

Dear Tuttle and Tom:
You both sent me to the appropriate place. I downloaded the instruction file (PDF). Many thanks.
Incidentally, I then downloaded the upgrade offered at the top of that page (from v3.2 to v3.2.4) but after ±90% of the necessary time needed, it shut down with a "Failed to Mount" message (whatever that might mean). It took more than 28 minutes to download that much even though I'm using DSL! Have either of you upgraded to v3.2.4 with or without difficulty?
Thanks again for your right-on assistance.
PowerBook G4 Mac OS X (10.4.2)

Installing printer without the cd

How do I install my printer without the cd?

Hello kmb80,
Welcome to the HP Forums.
I see that you are in need of the Software and Drivers for your printer.
Please click on the following link for the HP Print and Scan Drivers: USB Support. Save the file to the Desktop of the computer and once the download is complete, double click on the new icon that is now on the Desktop.
I hope this is what you are looking for. If you have any other questions or concerns, feel free to write me back at any time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Direct wireless print without the use of a router

Is it possible to print directly to the printer without the use of a router?
This question was solved.
View Solution.

Hi Brad,
Welcome to the HP Community Forum.
OFFICEJET PRO X476 AND X576 MFP SERIES User Guide says Yes
See Page 118
Reference:
HP Officejet Pro X476dw Multifunction Printer
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

When I populate a form and send to my printer, the form prints without the info I entered

When I populate a form and send to my printer, the form prints without the info I entered. How do I fix this?

Posted last week:
Epson Printer Drivers v2.19 for OS X
If you use Software Update, probably got installed. If you are like me, you clone your system before any update or changes, in case something breaks.
Windows you don't or haven't heard of? VM = virtual machine, ie a guest OS running under Mac OS (or running natively on its own partition, seeing sometimes there is software that is essential but only needed for business or once in a while). Runs just like another app (and uses an app to control the guest OS).

Cannot print from the web although everything else prints ok - when asked to print I get one blank page then nothing

I cannot print from the Web all else prints OK the printer throws out a plain sheet of paper and the print preview is blank
== This happened ==
Every time Firefox opened
== about six weeks

Try This!
1) Go to Print Preview
2) Print
3) Name: HP PSC 2100 series (depend on your printer)
4) Properties...
5) Paper size: letter
6) Change to Paper size: A6
7) OK
8) Repeat step 4 again
9) Change back again Paper size: letter
10) OK
11) Don't print, but go back to Print Preview again and see if it works
This is the one that have work for me after trying several times modifying about:config with no success. Good luck and hope that will help.

I cannot print off the internet.

I cannot print from the internet, the printer wants to fax the document and I do not have the printer set up to fax. I have Windows 7. I have a MX922 just set up.
Solved!
Go to Solution.

Hi mmwesty,
Please open your internet browser and then go to FILE and select the PRINT option. Please ensure that the PIXMA MX922 printer is selected in the window and not the PIXMA MX922 FAX. Next, please go to your START menu and select DEVICES AND PRINTERS. In the window that opens, please right-click over the icon for your PIXMA MX922 and select the SET AS DEFAULT PRINTER option. This will set the printer as the default when you attempt to print instead of the fax.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Cannot print with the new OSX with my canon mp550 printer

I cannot print with the new OSX with my canon mp550 printer , it sais there is no available driver ..!! what to do ..?? does anyone have a solution ..??

OS X Mavericks: Reset the printing system

Cannot print without the GRID showing thru...

Similar Messages

Maybe you are looking for