Cannot program tv/dvd combo 32" Insignia brand on fios remote

I purchasesd a Best Buy brand  Insignia 32" tv/dvd combo.  I was able to program the fios remote for the tv portion, but was unable to program the dvd. I used the method for both the tv and the dvd where you enter 922, etc. and scroll.  The tv programming worked the first time, but the dvd programming failed after several attempts.  I pressed fast forward each time until the remote flashed that it was finished.  I tried the dvd programming with a dvd playing. Anybody have a solution to my problem?  Thanks in advance.

I've got the same problem on my insignia. The problem is that tv/dvd  or tv/vcr  combo units are notoriously hard to get inexpensive remotes to work on. Its due to it being a combo unit. Combo units do not use "standard codes"  (most of the time). 
Unfortunatly if you have already done the scan mode on the remote, it is not likely going to work with the verizon remote. Getting a generic universal remote and programming it to the verizon stb may be your only hope of getting everything on one remote
====================================================================================
Error exists between keyboard and chair.

Similar Messages

  • Insignia 26" LCD TV/DVD Combo display problem

    My Insignia 26" LCD TV/DVD Combo has a display problem when you turn it on it is very bright, changes to verticle stripes after about 10 minutes of "warm up" you begin to see a egraded picture and after a little more warm-up the picture finally comes through clear.  I am past my warrenty period but I would like to fix the TV rather than throw it away.
    1) can someone tell me what the problem is
    2) identify the part that needs replacment and the cost
    3) estimate repair cost if I brought it in to be fixed
    Thank you

    Try setting the input to antenna and then scanning. If that doesn't work, you will need to get a tuner box.

  • Deal of the Day 11/21/2013​, Insignia 32" LED 720p 60Hz HDTV DVD Combo

    Check out this great deal on an Insignia television that we have as part of our Deal of the Day offers for 11/21/2013.
    Insignia™ 32" Class (31½" Diag.) LED 720p 60Hz HDTV DVD Combo
    Deal of the Day price: $199.99
    Regular price: $269.99
                                                  You save: $70
    * In-store and online. Limited quantities. No rainchecks. Price valid only 11/21/2013.
    Be sure to check out the rest of our Deal of the Day Offers for 11/21/2013 and sign up for email alerts so you never miss out.
    Justin|Community Connector | Best Buy® Corporate
     Private Message

    ahhhh more fun, 3 windows updates are now causing a no boot, Black screen. Everytime i must do a system restore and i see the logs of the updates, anyone know what the cause of this problem is?

  • Superdrive cannot recognize blank DVD-R

    I have a black MacBook that is around 6 months old. I have never had a problem with the superdrive until recently. It can recognize and read DVDs, CDs, and Blank CDs but CANNOT read blank DVD-Rs. It will spin the DVD for a while then eject it. I have tried different brands of DVDs and none work. Is this a problem with my superdrive that Apple needs to fix or can I do it?

    A shot in the dark, but these aren't DVD-R DL discs, are they? The original Macbooks can't write to Dual-Layer discs. They'd say DL on the package somewhere, and cost several dollars per disc.
    If that's not the issue, then yeah, I think you have a bum drive. I'd take it in while it's still under warranty.

  • I cannot successfully burn DVDs

    Hi, I cannot successfully burn DVDs. Every time I try, I end up wasting a disk because though it will read on the computer, there is No Play on the actual DVD player hooked up to the television. If anyone can offer help, tell me what to do and where to go to make this a success...thanks in advance

    First which MacBook do you have? The 1.83 ghz does not have a burner. What program are you trying to burn with?
    Here is some info for the dvd
    trouble shooting slot load
    http://docs.info.apple.com/article.html?artnum=88275-en
    Mort

  • Cd-rom dvd combo drive question

    Hi folks, I'm currently experiencing probl with my cd-rom dvd combo drive cheepo "rosewill". When I'm playing dvd movie the sound is clicking and it's really anoying.To make sure it is dvd combo drive , copied dvd (vob) file to comp, and then played; Sound was perfect.is this something wrong with my dvd drive or I just missed something  ??

    definately the drive, tried 2 brand new dvd's no luck. Gonna rma, thanks anyway
    Rob

  • I cannot get a dvd to play. The error message says "media type not supported". I think it is a .m2ts. Any idea on how I can get it to play?

    I cannot get a dvd to play on my computer. The error message says in iDVD is "media type not supported".
    The DVD was produced with a video camera and is in HD format. I think the the format is .m2ts?
    Any ideas on how to get this to play?

    Check out > Mac App Store - Free MTS M2TS Converter
    and/or others at > playing .m2ts format in OS X - Google Search

  • I am programming a DVD-Rom in DVD Studio Pro 4 and need to display and open pdf files, any suggestions?

    I am programming a DVD-Rom in DVD Studio Pro 4 and need to display and open pdf files, any suggestions?

    http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=22% 26section=9%26tasks=true

  • VCR/DVD combo (maybe without a tuner) to use with a converter box?

    The VCR that I've been using is starting to chew up tapes so I'm looking for a replacement.   I've had my eye on a Magnavox ZV426MG9 VCR/DVD tunerless combo since the manual I looked up online indicated that it could be connected to a converter box.  However, some negative customer reviews of that unit and the Magnavox unit WITH a tuner, ZV457MG9, make me wary of getting that one.  Also, my stepfather has said that he's had problems with previous Magnavox recording devices he's owned.  So does anyone have any recommendations for a VCR/DVD combo unit, with or without a tuner, that can be connected to a converter box that they could recommend?  Since I have a converter box, I figure I may not necessarily need a tuner but it has to be able to be connected to a converter box, not just a cable or satelite box.  I'm thinking of copying movies that I've recorded on VHS to DVD to increase my supply of usable tapes.  I record cartoons that I watch every day.  Also, since I don't have a lot of money to spend, I'm considering factory refurbished or used items.  On ebay my spending limit is up to $100.  Each time I think I think I can afford to order what I need, something else comes up that needs to be paid off and I keep having to put it off.   And I don't suppose I can put a Geek Squad service plan on something I buy somewhere else.  If I can, let me know how that can be done.

    Thanks. Changing the channel isn't really an issue for me since I usually only record one channel a day and that's cartoons in the morning.  If I need to record anything else in the evening, I've usually at home to reset the VCR and set the channel on the converter box.  I figured out how to record from a converter box on a VCR and wrote a post about it on Best Buy's digital tv transition board before they took that board down.  And I have done some research on tunerless VCR/DVD combos from looking up the manuals online and contacting the manufacturers directly and found that not all tunerless units can be set up to converter boxes. Some can only be connected to satelite or cable boxes, or at least the manuals only include instructions for connections to cable and satelite boxes and nothing else or the manufacturers claim that connections are only possible to such devices.  As for Panasonic, my stepfather bought a Panasonic unit and had terrible luck with it and so I am staying away from that.

  • No picture on TV/DVD combo when connected to laptop via HDMI

    I have. 2008 19LV50KW TV/DVD combo that I'm trying to use as a second monitor for my new laptop. I have it connected via HDMI port, and the laptop recognizes the Toshiba, I have windows 7 and have dual monitors enabled, yet there is only Black on the Toshiba TV (I have it on the HDMI input selection). What could be the issue ?

    I've seen a number of similar posts around the internet.  I have this same Toshiba TV, and my new fire TV stick from amazon will not display via the HDMI (the only option).  So then I tried my laptop, and discovered that it too would NOT display.
    Based on that troubleshooting, I've concluded that it much be an issue with the TV.  Can this be remedied in any way?  Both my fire TV stick and my laptop work on all of my other TVs.  There seems to clearly be an issue with the HDMI input with this Toshiba model, and maybe more.
    Please advise.

  • Cannot install BBM for iphone on my brand new iphone 5S 16 gb..

    Cannot install BBM for iphone on my brand new iphone 5S 16 gb. The Screen is stuck on 'Setting up BBM' for days with the spinning circle. I've tried uninstalling and then  re-installing it a number  of times but nothing seems to work.

    See my reply to your other post on this problem.

  • 22CV1000 Toshiba LCD TV/DVD combo: Sound but no display

    I am having problems with my 22CV1000 Toshiba LCD TV/DVD combo!
    When I turn the tv on, it sounds like it is trying to read a DVD. The display appears for second, but then goes black. I still have sound, just no display. 
    The Toshiba help line told me to unplug and replug the tv - but that did not help.
    I would really appreciate your advice!

    At this point, I think you should call support back. It sounds like it might need a repair.
    - Peter
    - Peter

  • Help connecting my VCR/DVD combo and my Wii

    I have a TV with a built in VCR (that doesn't work), so I have VCR/DVD combo.
    I would like to hook up my VCR/DVD combo and my Wii but I am not sure how with my HD DVR box.
    The HD DVR uses the only audio/video plugs that are on the TV.
    Any help would be greatly appreciated.
    Solved!
    Go to Solution.

    FROM BACK OF TV---- COAX---- TO AV SWITCH
    TV on channel 3
    FROM AV SWITCH--- RCA(red yellow white)------ TO DVD
    FROM AV SWITCH--- RCA(red yellow white)------ TO VERIZON BOX
    FROM AV SWITCH--- RCA(red yellow white)------ TO WII
    If your AV switch does not have enough hook ups... may want to buy a bigger one OR hook one device in the front RCA jacks... I personally would go with the Wii in the front.....
    once hooked up, the TV is on channel 3... and the AV swithch is switched to whichever device you like
    If you use the RCA jacks on the front of the TV, you will need to change the input selection of your TV, in order to view the device plugged in there
    hope this helps
    if not, I reccomend either
    A) contact the AV switch for support on walking you through hooking their equipment up
    OR
    B) get a local teenager/friend/family member/coworker/etc to come hook it up for you.... maybe make them lunch or buy them beer or something
    Bob Robertson - Lighter Klepto - I steal lighters, not bandwith

  • 19" lcd dynex tv/dvd combo problem

    I am wondering if anyone can help me with this.
    I have 2 19" lcd tv/dvd combo... one in each kids room. I mounted em up on the wall so the kids couldn't mess with them.
    So now heres my problem, both of the tvs when turned on turn off then back on then back off... continuous
    Ive unplugged em, tried pushing different buttons. Still nothing.

    Both of them?
    Really? Both?
    Now that's odd. 
    That sort of thing makes you think it's an external problem (not relating to the TV) - but let me ask you this, did they start doing it at the same time or did one do it, and then the other later on? If so, what changes did you make if any?
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

  • Toshiba 24LV411U TV/DVD combo turns off

    I have a Toshiba 24Lv411u TV/DVD combo.
    When turn it on the red light turns green for about 10 seconds then it turns itself off again.
    I unplugged it for a few months...went back to it today and it worked fine for a few hours.
    Now it's back to the same old turning itself off again.
    Any ideas?
    Thanks

    Toshiba 24LV411U is not known to me but from my point of few its hardware malfunction.
    Maybe something wrong with main board or other electronics parts.
    Sorry mate but I think its impossible to say whats wrong exactly without detailed check.

Maybe you are looking for

  • Help needed for VPN IPSEC configuration.

    Hi There, I'm trying to set up a IPSEC VPN connection in my GNS3 lab and all the show commands and debugs does not seem to give me any clues of what is wrong or missing...can someone please help me in troubleshooting my VPN config. Below is the confi

  • I need to restore my iphone 4 with just ios 5, but it only lets me restore it with the latest version which is ios 5.0.1. What can I do??

    I need to restore my iphone 4 with just ios 5, but it only lets me restore it with the latest version which is ios 5.0.1. What can I do??

  • IDoc stricture for AFS

    Hi I imported IDoc /AFS/MATMAS04 structure into IR with all fields. There are few fields with "/" as starting letter. Once I imported into IR, it replaced "/" with "_-" for all fields. Now ,I am sending IDoc from R/3 and been delivered to Integration

  • Sorting by keyword

    A strange thing is happening when I sort using keywords: I have my iPhoto "view" set to display film rolls in ascending order. Before I do a keyword sort, everything is in the order it should be - however, once I sort by highlighting a keyword, the r

  • HE 6 security settings with HFM 11?

    Hi All, I wanted to know if the security extract from an HE 6.4.1.1 system is compatible as-is to be loaded into HFM 11.1.2 using the "Load Application Security" function. I see this statement in the Admin Guide "Caution! You can only load security c