Cannot publish a webtemplate to portal after installing Bw700SP10_1000-1000

After installing SP 10 for frontend, the menu option in the WeB Application Designer: Publish to portal does not work anymore.

I have encountered  a similar problem after applying SP 10 and Kennel 83.  For publishing from BEx Web Application Designer: In the menu bar, choose WEB Template >> Publish >> to the Portal.  I expect to see the portal content folders .  Instead I get the following error:
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex3x).
Exception id: 05:45_11/12/06_0001_107772150
See the details for the exception ID in the log file
Any suggestions on resolving this is appreciated
Regards,
Andrew

Similar Messages

  • Can't Start Portal After Install

    After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic/management/internal/
    Helper.preloadMBeanInfos()V from class weblogic/management/Admin
    at weblogic.management.Admin.initialize(Admin.java:210)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    I even tried "weblogic" for the system password and I get the same message.
    What password should I use to start the server?

    I've followed the directions and am experiencing the exact same problem. Brand
    new installation of Weblogic server 6.1 SP2 with examples. That install is working.
    Then added Portal 4.0 SP1, updated the license file and I have the same issue
    with the Illegal access exception resulting in the "Fatal initialization exception"....
    Hmm!
    [email protected] (Bowrat) wrote:
    Below listed are the common errors you run into during installation
    process:
    - You need to have the correct version numbers of both the weblogic
    server and the portal server. For instance the portal server 4.0 (eval
    copy) will only run on WebLogic 6.1 SP1. So check the edocs for
    supported platforms
    - Make sure you have the installed the full version of the weblogic
    server (including examples)
    - Finally, you need to run the UpdateLicense.cmd file to update the
    license.bea under ur Bea Root
    Give it a shot after u have checked all of the above three - goodluck
    - Bowrat
    www.Bowstreet.com
    Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
    From: Steve Anderson <[email protected]>
    Newsgroups: weblogic.support.install
    Subject: Can't Start Portal After Install
    References:
    NNTP-Posting-Host: 209.11.114.150
    X-Original-NNTP-Posting-Host: 209.11.114.150
    Message-ID: <[email protected]>
    Date: 13 Feb 2002 20:25:53 -0800
    X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
    Organization: BEA SYSTEMS Inc
    Lines: 18
    XPident: firewall-user
    Path: newsgroups.bea.com!209.11.114.150
    Xref: newsgroups.bea.com weblogic.support.install:9600
    After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
    that I entered during installation:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic/management/internal/
    Helper.preloadMBeanInfos()V from class weblogic/management/Admin
    at weblogic.management.Admin.initialize(Admin.java:210)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    I even tried "weblogic" for the system password and I get the samemessage.
    What password should I use to start the server?

  • Cannot print to HP LaserJet 1020 after installing Reader XI 11.0.03

    After installing the Acrobat Reader 11.0.3 update, I cannot print to my old, reliable HP LaserJet 1020 from Acrobat Reader and many other applications at all. Am using Win 7 64-bit.  Also have Acrobat 7 Standard and PDF-Xchange 4.0, both of which have become semi-broken after installing the Acrobat Reader 11.0.3 update as well.

    One of the things I have experienced in the past with printing PDFs is that it would hang in the print queue.  There is a manual method of deleting the print documents in the print queue.  But the issue is printing PDF documents that are scanned in and has maybe highlighted text or handwritten notes on the PDF.  The printer driver can render it correctly if printing the PDF as a text document.  What you have to do is change it so that it prints as a PDF image instead.
    To print as an image, open the PDF then click File then click Print.  Click the Advanced button on the following window that pops up and select the check box "Print as image". 
    Now to clear your print queue will be key prior to doing this if the print job is hung in the print queue. 
    Here is a Microsoft KB Article that explains how to do this.  I think it has an available Microsoft Fixit tool you can use as well.
    http://support.microsoft.com/kb/946737

  • HT6114 I cannot log in to my AOL after installing OSX Mavericks

    Why can I cannot log into to my AOL account after installing OSX Mavericks?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Cannot enter text in Elements 11 after installing PS CC and LR 5

    After downloading installing PhotoShop CC and LightRoom 5, I cannot enter text in PS Elements 11.  I get the message that "something prevented the text engine from being initialized."
    How do I correct this?

    Did you reboot the machine after installing the new applications?  In windows 7 and Windows 8 it is almost always required to reboot the machine.  sometimes it does it automatically but sometimes it doesn't but it is a good idea to manually RESTART the machine.
    Hope this helps.

  • Fix the: Cannot view PDFs in Safari Window after installing CS3

    All,
    To fix the problem of displaying PDF files in Safari after installing CS3.
    Open Adobe Acrobat 8 and then go to the preference menu, on the left hand side look for internet, select this option and then UNCHECK the options to use to open PDFs.
    Apply and quit Adobe Acrobat 8. Quit Safari if still running and then reopen. What Safari does now is use the default settings and will open the PDFs as before.

    If it's not essential that the Adobe plugin handles PDF files then try turning off the plugin support via Adobe Reader preferences -> Internet -> Unselect the option to handle PDF files (sorry, I'm not on a Mac to quote the exact text but it's words to that effect).
    If no other plugins handle PDFs, Safari should pick up the slack and handle them natively.

  • Letter A replaced all words in top bar and info boxes so I cannot read them. This soon after installing OS X Maverick, so I suspect this is related. Restart and Command-Control-P-R do not help.

    ? - Letter A has replaced letters of all words in top bar and  program boxes so I can read nothing, and therefore have no way to enter commands. This comes soon after installing OS X Mavericks, so I suspect this is related. Restarting and command-control-P-R have not helped. Can anyone suggest a cause?

    Back up all data.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
    From the application's menu bar, select
    File ▹ Restore Standard Fonts...
    You'll be prompted to confirm, and then to enter your administrator login password.
    Boot in safe mode to rebuild the font caches. Boot again as usual and test.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.
    Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

  • Cannot browse valid procedure in portal after creating a new one.

    i can browse http://xxx/pls/web/web.home by ie5 after install 9ias. but when i created a new procedure in the same schema,ie returns "procedure do not exists.".
    The new procedure is valid in 'dba studio'.
    do i need more config??
    thanx.
    null

    Do this...
    Login as <portal_schema> to SQL*Plus.
    grant execute on <your procedure> to public.
    Then you will be able to run this procedure thru browser.

  • Cannot open designer for aspx files after installing Visual Studio 2013

    When I attempt to open the design tab for a aspx file I get a popup that reads: Cannot load "C:\PROGRA~2\MICROS~3.0\Common7\Packages|FPACUT~1.DLL".  I'm running on Win 7 SP1.  Version of Studio is 2013 Ultimate.  I tried running
    in SafeMode and tried using /Log but theirs nothing related to this error coming out.  I very novice with VS, but I'm an experienced Java developer.  I actually had a version of VW 2012 Pro that I was using for TFS for a java project.  I've
    tried a repair, I've tried an uninstall.  I've uninstalled the old 2012 version of VS.  Nothing seems to get around it.  Be happy to supply additional info, but not sure where to look.

    Hello ToddMorgan,
    Can you create a new project and test the result?
    If you can open any aspx file from other projects then please copy content from your current project to the new project.
    If you still cannot open any aspx file, please upload your full logs. Please use 
    http://aka.ms/vscollect 
    to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
    https://skydrive.live.com/ 
    and share the link here.
    I will check whether your installation is corrupt when install. By the way, you may also try refer to this page:
    http://stackoverflow.com/questions/3937135/cannot-load-fpacutl10-dll-error-in-vs2010
    And check whether the system variable  is the cause of your issue.
    Regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannot open/find libaries in Forms6i, after installing Forms 10g.

    Hi
    I just struggled to install Oracle Developer Suite 10g PS3 (10.1.2.3.0) on windows vista SP2.
    As I also have an Oracle RDBMS 10.2.0.3.0 and Oracle Developer 6i installed on ym notebook, I have everything in different ORACLE_HOMEs.
    Now, i just made a short try to migrate one of my small forms applications from 6i to 10g.
    Now, I cannot run it in Forms6i anymore, even though I have different homes and even different folders (made a copy for 10g). (In fact it always tells me, it cannot find the plls) Why on earth is that??
    As our customer still has 6i, it has to work! Other applications still work...
    Thanks in advance
    Karine

    Hi
    Yes, it is only one library which causes me problems and it has attached libraries.
    After having recompiled all files (pll, olb and fmb) I could open all files, except the one causing problems. I open it, using the explorer and NOT Forms Builder. So I could at least reattach alls attached libraries (without path), recompile it.
    This didn't help, but the error message suddenly showed another pll it couldn't find.
    I start my application with a shortcut on the desktop.
    So i reattached all libraries to the "start-form" and also recomplied it. Still no success.
    BUT then i put all recomplied plx in the Folder, where all the fmx are, and now it works.
    I never had to do this before and don't really understand why, because the path where all libraries are, is also in the registry-key FORMS60_PATH, but nevertheless it works :-)
    Thank you, Craig, Sarah and spilgrim for your help! It was very much appreciated.
    Karine
    PS: Map directory?

  • Cannot scan with my HP6210 OfficeJet after installing Yosemite

    Since installing Yosemite on my MacBook Pro I have not been able to scan using my HP OfficeJet 6210.  I have followed the instructions on the HP support page 'No Scan Options' relating to uninstalling and reinstalling the Apple built-in software, but I cannot scan either with Print/Scan, Image Capture or with Preview.  In all three cases, after adding the printer back, when I attempt to scan the first screen message is, Waiting for scanner.... and is then followed by, Failed to open a session on the device.
    After I uninstalled the software and followed the instructions to delete the 6200 file from the PPD Resource file, it no longer shows up in the dialog box for software when I added the printer in Printers & Scanners in System Preferences .  So I am left with using Generic  PCL printer software.  Also, there is no choice for model 6210, only 6200.
    It seems that I have run out of options to resolve the problem.

    Hi,
    Please try the following instructions to update:
       http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Mac-OS-10-10-Yosemite-and-HP-Printer-Support/...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Cannot boot computer out of safeboot after installing OS X Yosemite

    Hello,
    I installed Yosemite on my macbook pro from early 2011 recently and I've had nothing but major problems. Right now, the major problem is that I cannot boot my computer out of safe mode. When I try to boot it outside of safe mode, it will either freeze on the sign in screen, or it will freeze after signing in. My computer is also paused in the middle of encrypting the hard drive for FileVault, saying to "connect to power to resume encryption." I know that it cannot finish this process unless the computer is not in safeboot mode. It's making my computer run much harder than usual and deplete the battery much quicker.
    This is all very problematic for me. I'm a college student and my life pretty much relies on the usage of my computer.
    Some other problems I've had since upgrading to Yosemite:
    Speakers stopped working and didn't register (they work now)
    Computer is extremely laggy in loading many things
    I'm unable to search for any files through finder
    There is nothing under "all my files" in finder.

    Update:
    I was able to get into my computer out of safeboot mode and heres what happened
    The encryption start and then paused permanently for several hours. I restart the computer, went into Terminal and typed in "sudo fd setup disable" as suggested by someone in a different thread. The encryption finished, I restarted my computer, and turned FileVault off. So far, things seem to be working much, much better. I guess time will tell if this is a permanent fix.

  • Cannot get to Acrobat X Pro after Installing

    I installed Acrobat X Pro on a server. Icon is white and says Acrobat X Pro but when I open it it is only reader. I do not have Reader installed on the server. I also have already gone to edit:preferences:general and chose the default to Acrobat X Pro but I still only get Reader when it is opened.
    Please help...this is for hospital use.
    Lori

    Hi Lori,
    I think the registry keys are not getting updated after installation of Acrobat.
    Try uninstalling Adobe Reader and Acrobat both and then install only Acrobat and check if issue still exists.
    Regards,
    Anoop

  • Cannot Startup Grid in 11gR2 RAC after Install Grid Successfully

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6 according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    Grid and RAC database have been installed successfully for both VMs rac1 and rac2.
    I am using the slave VM rac2 to test Grid and RAC database because rac1 disk is full.
    The problem is that OCR file is not available or currupted in the slave VM rac2.
    I have created a pfile and add entry in the file sqlnet.ora in the slave VM rac2. By now, I still cannot startup Grid as below:
    [ora11g@rac2 /]$ cd u01/app/grid/bin/
    [ora11g@rac2 bin]$ crsctl status resource
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4000: Command Status failed, or completed with errors.
    [ora11g@rac2 bin]$ cd /u02/11g_db/ora11g/racdb/bin
    [ora11g@rac2 bin]$ srvctl config database -d racdb
    PRCD-1027 : Failed to retrieve database racdb
    PRCR-1070 : Failed to check if resource ora.racdb.db is registered
    Cannot communicate with crsd
    [ora11g@rac2 bin]$
    [ora11g@rac2 ~]$ cd /u01/app/grid/bin
    [ora11g@rac2 bin]$ export ORACLE_SID=+ASM2
    [ora11g@rac2 bin]$ ./sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Mon Mar 26 12:40:35 2012
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/u02/11g_db/ora11g/racdb/dbs/init+ASM2.ora'
    SQL>
    I have checked that there is no the file init+ASM2.ora in the directory '/u02/11g_db/ora11g/dbs'.
    As we see the outputs above, my question is:
    Can any folk help to solve the issue to start up Grid ?
    Thanks.

    Folks,
    Hello. Thanks a lot for replying. Let's analyze 3 cases as follows:
    Case 1:
    If don't export ORACLE_SID=+ASM2, the output is below:
    [ora11g@rac2 /]$ cd u01/app/grid/bin
    [ora11g@rac2 bin]$ ./sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 27 12:31:35 2012
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+DATA/racdb/spfileracdb.ora'
    ORA-17503: ksfdopn:2 Failed to open file +DATA/racdb/spfileracdb.ora
    ORA-15077: could not locate ASM instance serving a required diskgroup
    SQL> startup pfile='/u01/app/grid/dbs/pfile'
    ORA-01031: insufficient privileges
    SQL>
    Case 2:
    If export ORACLE_SID=+ASM2, the output is below:
    [ora11g@rac2 bin]$ export ORACLE_SID=+ASM2
    [ora11g@rac2 bin]$ ./sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 27 12:41:33 2012
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/u02/11g_db/ora11g/racdb/dbs/init+ASM2.ora'
    SQL> startup pfile='/u01/app/grid/dbs/pfile'
    ORA-01031: insufficient privileges
    SQL>
    Case 3:
    Now, as you indicated, I export ORACLE_SID=racdb2, the output is below:
    [ora11g@rac2 bin]$ pwd
    /u01/app/grid/bin
    [ora11g@rac2 bin]$ export ORACLE_SID=racdb2
    [ora11g@rac2 bin]$ ./sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 27 12:33:48 2012
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+DATA/racdb/spfileracdb.ora'
    ORA-17503: ksfdopn:2 Failed to open file +DATA/racdb/spfileracdb.ora
    ORA-15077: could not locate ASM instance serving a required diskgroup
    SQL> startup pfile='/u01/app/grid/dbs/pfile'
    ORA-01031: insufficient privileges
    SQL>
    As we see the ouputs above, export ORACLE_SID=racdb2 doesn't have any effect. My question is:
    Can any folk help to solve the above 3 issues to start up Grid ?
    Thanks.

  • Cannot sync iCal to my iPhone after installing Maverick, cannot sync iCal to my iPhone after installing Maverick

    install OSX Maverick ...thereafter i cannot sycn my iCal with my iPhone. Any solutions, advice?

    Hi
    Yes got it resolved...looks like it got to be through iClouds. Can't do it any other way.

Maybe you are looking for