Cannot publish: solution found

Hi all. I'm an iWeb/.mac newbie with a trial .Mac account testing whether or not to keep the .mac.
I first fired up iWeb a few weeks ago, then didn't have time to mess with it. Recently, from lack of time to do a photo gallery myself via emacs, and the need to share some pictures, I used iPhoto to put some pictures online on the .mac account.
That worked fine and page was created, that is until I started messing with iWeb trying to add more pages. I had previously published one small/test page just fine, then continuously (weeks) had problems and could not publish. Then 1.1.1 came out, and I still could not publish.
Some of the solutions I tried: editting the Domains.sites package. Deleting the iweb prefs file. Deleting the Domains.sites file. (see group archive for explanations of these methods)
Nothing worked, and I spent hours reading all your helpful messages in this forum and surfing for solutions.
Last nite I finally hit on the problem - an upstream httpd proxy server (squid, on a Firewall). I realized the first iWeb page I had published I did from a Mac at work. The rest I tried doing from home, where the proxy server is. Whenever I tried to publish from home I got the "cannot publish" error. I had mistaken that for .Mac downtime, slowdowns, phase of the moon, you know the drill.
So last nite I turned of the web-proxy here, and lo and behold I now have absolutely no problems publishing (proof: http://web.mac.com/lottadot/ )

With the firewall I'm using it's just a checkbox to enable/disable. YMMV. BTW, Astaro is free for home use. http://astaro.com/

Similar Messages

Cannot publish to MobileMe?

Hi guys,
Have used Mobile Me in the past to upload iWeb sites with a movie. Usually no problem, but now it is saying that it has published, but when I try the link it says 'page not found'.
Also when I try to look at previous movie on a PC using Firefox or Internet Explorer, I can see the web page and the movie box, and can hear the audio - but no picture!
Please help - it is driving me mad!!
Stephen

Besides the wrong title of the post "Cannot publish to MobileMe?" (Yes you can) the question is:
why do you publish a wall-to-wall video (1280x720) of 53.2MB and display it as a thumbnail (533x300) on the page?
I exported it for iPhone and now the video is 480x270 and 13,4MB.
but on a pc - just audio, no movie
Might be this : [SOLUTION : Movie NOT playing on Windows PC|http://discussions.apple.com/message.jspa?messageID=10370447]

Hi, i cannot publish my iWeb site with a non mac domaine name...can anyone help please?

hi, i cannot publish my iWeb site with a non mac domaine name...can anyone help please?

Hi, I have a site developed by myself usinf iWeb and as iWeb are no longer hosting teh sites in 2012 i have found another domaine. It is with Go Daddy and the domaine / name is live. I have tried to publish site using fttp but keeps coming up wih a common error message saying the info i have input is incorrect. I have tread this may be an issue if host is a windows based host???
appreciete your help

Cannot Publish Slides from PowerPoint 2013 to SharePoint 2010 Slide Library

I have the 64-bit version of Windows 8 Release v1.0, Internet Explorer version 10 (10.0.9200.17183), Office 2013 Professional 32-bit, and a SharePoint 2010 environment. I cannot publish slides to the SharePoint environment at all. When
I attempt to do so from PowerPoint 2013, I receive an error indicating all slides (X of X) failed to upload. When I attempt to use the option in the SharePoint 2010 Slide Library (Upload > Publish Slides) I receive the error of "This feature
requires Microsoft Office PowerPoint 2007. Either the application is not installed, or your browser is not configured to support ActiveX controls."
I have added the URL for the site in question to my "Trusted Sites" in Internet Explorer 10. I read through the KB 2716529. There is no TabProcGrowth registry entry under HKEY_CURRENT_USER, but there is one under HKEY_LOCAL_MACHINE
and the value is set to "Medium" which appears to be accurate. I tried running the "Fix it For Me" option offered with that KB, and the wizard indicated the problem could not be found on my computer.
How can I resolve this issue? Utilizing slide libraries is a very important feature of SharePoint for my organization, and going back to Office 2010 is simply not an option.

Hi Jen_O,
According to your description, my understanding is that you were unable to publish Slides into SharePoint 2010 with Office 2013.
For narrowing this issue, let's verify the followings:
Please test on other machines with the same system configuration, compare the result.
Please test on other machines with 32-bit system and IE 10, compare the result.
Whether you are able to publish Slides from Windows 7 and Office 2013 32-bit.
Whether this issue occurres for all slide files with Office 2013.
Please create a new slide in PowerPoint 2013, and check if it could be uploaded into a new Slide library.
In addition, Office Web Apps (as part of SharePoint 2010) allow SharePoint users to view and edit Office documents (Word, PowerPoint, Excel etc.) from within the browser. Typically we can click on a link to a PowerPoint, for example in a document library,
and be taken to a new page to present PowerPoint.
More information:
https://support.office.com/en-us/article/Start-using-Office-Web-Apps-in-SharePoint-2010-995dc117-6ca9-4452-9ca0-a6a9009dc907?ui=en-US&rs=en-US&ad=US
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Cannot publish app via GUI but can via Powershell

Hi
I'm currently looking at an environment whereby applications can be published as a RemoteAPP via the New-RDRemoteApp command but when using the gui i'm confronted with the following:
And within the RdmsUI-trace.log
No firewalls between the servers, WMI running.
Any suggestions or pointers would be great.
Thanks

Hi,
Have you try to restart the server and check the result?
Is there any other RemoteApp working?
Do you have this environment under Microsoft Azure?
From the error description it seems the RDSH server is not getting recognized properly as might there is no proper connection. Please check whether you can find the respective server as added in GUI mode. Can you see the server under collections?
Do you face this issue on Server 2012 R2, if yes then found one related thread causing the issue. You can refer the last answer by “Adam” and see whether it can resolve your case.
Server 2012 cannot publish remote app programs
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am trying to update PR and PS and get error code A12E3. cannot find solution.

I am trying to update PR and PS and get error code A12E3. cannot find solution.

" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Safari 5.0.6 repeatedly crashes. MacBook Pro 10.5.8 I've emptied cache and reset to no avail. I've tried solutions found in other threads. Help, please.

Safari 5.0.6 repeatedly crashes. MacBook Pro 10.5.8 I've emptied cache and reset to no avail. I've tried solutions found in other threads but the more advanced don't seem to apply to me. Help, please.

Not sure what other tests they could run for me. I've pretty much run all the tests I can using Drive Genius and Tech Tool Pro 5. Is there anything they use that I don't know about??

Cannot publish 1 page in CS4. Other pages including index.html ok. Error message results.

After many months of no difficulty, I suddenly cannot publish changes to one of my pages (all others work) without getting the error message 'Another instance of Contribute is doing a workflow operation. Do you want to break the workflow and continue.....?' Whether I say yes or no and follow the prompts, it doesn't work. One way lets me exit, the other locks up my computer and I have to 'end task' to get control back. I hoped that the answer to the 'cannot publish index page' thread would help, but I didn't understand because most of this stuff is over my head. The only thing unusual I can dectect is the page name has an # sign after html as in 'name.html#tuition.' The word tuition refers to a pointer on the page. When I switch to edit mode, an asteric * appears after 'html' on the page name. I do not see that on any other page when I edit. I have CS4 version 5. Can anyone help? I don't know how many people there are in India, but I talked to half of them in a 2.5 hour 'session' in which I was transferred in a least 3 complete loops to every department and passing 'go' 3 times before some techie finally said I should email my question in and will get a reply within 3 days. Yeah, right. Worst tech support experience I have had in 10 years.

Hi,
Can you try deleting the Preferences and the Contribute's User Configuration folder. You will lose your website connections, you can recreate them again after relaunching Contribute.
If you have installed Contribute in Mac, go to <Username>/Library/Application Support/Adobe folder and delete Contribute CS4 folder there. Also, go to <Username>/Library/Preferences/ folder and delete the 'Adobe Contribute 5 Preferences' file.
If you have installed Contribute in Windows XP, the Contribute's Configuration folder will be in C:\Documents and Settings\<your username>\Local Settings\Application Data\Adobe\. Delete the Contribute CS4 folder there. To clear the registry for Contribute, type 'regedit' in the Run window.(Click Start, and click Run, and then type 'regedit' in the text field.) Select HKEY_CURRENT_USER, then Software, then Adobe, then Contribute CS4. Click Delete button. Close the Registry Editor window.
The <username>, I have mentioned above is the name with which you will have logged into the machine.
Now, Relaunch Contribute and connect to your website and try editing the web pages from your website. Can you try this?

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

First do the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Next, in Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Have version 6.1 on my iPhone5 and can't download videos to You Tube. Get error message Cannot publish. Help

Have version 6.1 on my iPhone5 and can't download videos to You Tube. Get error message Cannot publish. Help

update to the latest iOS version.

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

Cannot Publish in ADI ver 7.2.4

Hi,
Is this a known bug issue? I have a correct tnsnames file, and all correct passwords, however I still cannot publish reports.
I was told that this is a known issue with ADI ver 7.2.4. I am trying to find a web page from Oracle that acknowledges this bug, but I cannot find it.
Anyone know the bug in ADI and where I can find info about it? I tried to Google it, however it didn't come up. Or is anyone running 7.2.4 and able to publish?
Thanks in advance!!!

I am using ADI version 7.2.5, but I think we were using that version before.
Are you saying that you are able to log into ADI, but when you submit a report,
you receive an error message?
What does the error message say?
I recall having an issue before, because I forgot to include the
'FND...' entries in the tnsnames file..
Mark K

Cannot publish to MP4, get blank, yellow warning

I am using Captivate 6 (cloud - online) - which I just purchased June 2013. I use an iMac OS 10.8.4
The file size I am tyring to publish is 38.8 MB, but I cannot publish to MP4.
I even tried with a file that was only 4 MB, and cannot publish.
I also have the latest version of Captivate (6.2) Updated today.....
Tried after the upadte and still cannot publish.
The file names do not have any odd characters or spaces.
Any help would be appreciated.

Hi there,
Can you please confirm what is the resolution of your project? (check the bottom right side or click on modify > rescale project and check height & width).
Create a back up of your project (save it with a different name on another location), then rescale the project, so that W & H both should be in even numbers. (increase or decrease W or H by 1 to make them even)
Then republish your project in .MP4 and check whether this works?
Thanks.

Cannot publish .mp4 with AdobeCaptivate 7

Hello,
I cannot publish mp4 files. I creted a software simulation and want to publisg this as an mp4 file.
The AdobeVideo publisher starts and quits immediatelly. I gave had this with Captivate 6 as well but back in the day I was not using this feature so I did not deal with it. Now that i need it I cannot work!
I am using MAC and mountain lion on my iMac and Maverics on my laptop.
Also checking the applications folder it seems that videopublisher is not properly installed. I have unistalled and reinstalled several times but no change. My IT dpt. tried as well and no joy.
The files generates but it is 0bytes as you can see:
I have heard about the issue before but I have searched throughout the web and your forum and could not find a resolution to my problem.
Can you please help me?
Regards,
Argi

I am using ADI version 7.2.5, but I think we were using that version before.
Are you saying that you are able to log into ADI, but when you submit a report,
you receive an error message?
What does the error message say?
I recall having an issue before, because I forgot to include the
'FND...' entries in the tnsnames file..
Mark K

Eclipse cannot publish to osb 10.3.3

Hello experts,
It seems that I cannot publish from Eclipse to a linux osb test app server.
The error message:
The specified domain path is not a valid Oracle Service Bus domain
Already checked the config.xml file according to a older post Oracle Service Bus configuration project deployment problem .
it is <source-path>/opt/middleware/osb_11.1/lib/kernelEar</source-path>
My versions follow:
Eclipse Platform
Version: 3.7.2
Build id: M20120208-0800
TIA!
Edited by: NickAiva on May 2, 2013 5:11 PM
Edited by: NickAiva on May 3, 2013 11:41 AM

Yes, it does.
Version compatiblity issue between OEPE and OSB
Project developed on higher version of OEPE OSB plugin may not get deployed into lower version of OSB runtime as it is not certified. Even Oracle won't provide any support if you will face any issue, in such case. So it's better to use compatible OEPE OSB plugin (in your case OSB 11.1.1.3.0)
I asked you whether you have PS2 (11.1.1.3.0) installed in your machine from where you are trying to publish and definitely answer is "No". You are using OSB plugin of higher version for development and trying to publish the project to lower version of OSB, which is not certified (or supported, in other words)
OEPE 11.1.1.5 is certified with OSB 11.1.1.3.0 plugin so please use this combination.
Regards,
Anuj

Cannot publish: solution found

Similar Messages

Maybe you are looking for