Cannot publish to a private server

I am testing this out. I am using Dreamweaver MX and iCal 06. How do I publish a calendar so that it is viewable on my website through a web page? I can publish an .ics file, but it doesn't seem to know what that is or how to display it. I need help on this. Thanks

Thanks Bill,
I have been using WebDav for so long to view my iCals remotely that I can't figure out what your problem could be. It has always worked so well for me, and I use phpiCalendar to view them remotely.
My set up until yesterday was syncing my Palm to the office mac, publishing them to the WebDav server, as well as publishing my wife's iCals to the server, for a total of 4, all easily viewable from the net.
Lately I hve been looking into alternatives to that and at the risk of hijacking your topic, I have discovered another solution that provides a huge benifit to us.
As of today I can view AND edit any of the 4 iCals from either of our machines, AND keep them in sync WITH edit capabilities, as well as sync to my Palm Treo, and also publish to the web server as I did before for view only or subscrtiption, although the publish route seems pretty redundant now as I have all the cals on my palm from both machines and I have a live editable calendar on all 3 of my macs (the remote portable included) of all 4 cals!. I also sync to the cals remotely (across the internet) on my Palm.
If you want to know more about this set up, I would be glad to expand on it. It seems to finally answer all my syncing, editing multiple cals on multiple machines, needs.
Hope this helps,
Jamy

Similar Messages

Can not publish cal to private server

I'm trying to publish a calendar to a private server. I've double checked all of the info, the url, the server is wedDAV enabled (so they say). I use Earthlink as my web hosting isp. Is there anyone out there that has done this successfully? The error message that I get is... "it is not a valid location for this request"
Help.
mb

So they say? Hmm…
Here are some outdated but still applicable instructions to do so under Mac OS X here:
http://www.oreillynet.com/pub/a/network/2000/11/10/osxwebdav/osxwebdav.html
You might use these instructions simply for background on the technology, or as a checklist to setting up your own server.
Your digitally challenged friends with PCs can publish calendars to the same server if they use either Mozilla Sunbird, or the Calendar component available with Firefox. More information about both is available here:
http://www.mozilla.org/projects/calendar/sunbird.html
That original link explained how to set up a WebDAV server on an OS X box. If you want your ISP to provide those services, you'll have to contact them to arrange it. If you're attempting to configure these services on a server provided by Earthlink, you'll have to have them help you. Typically, an 'outsider' cannot configure such services unless a predetermined set of procedures to do so are in place, and you have been given the required access.

Publish ical on private server

Not so long ago I had my ical calendar published on my own http server. Times went by and after numerous OSX and ical updates I find that I can't publish my calendar on private server. I understand that this is because of my server does not have webdav installed.
So, my question is: is there a workaround to publish my calendar on private server that does not have webdav installed? I don't want to use google or any other web hosting calendars for a privacy sake.

I need the same information!!! PLEASE someone help us!

Troubleshooting Publishing To A Private Server

Anyone can help me, please do! I need to publish to my own private server, but keep getting the message:"http://[email protected]/calendar.html/Event%20Calendar.ics is not a valid location for this request". My base URL is www.catfishpoetry.com.

Well, I emailed the .Mac tech support, and here's what I got:
=====================
Dear Phil,
Thank you for contacting Apple.
The .Mac Support Team answers questions about the .Mac collection of software and services.
We appreciate your question and understand that you are having difficulty with Mac OS X and iCal. As this is related to Mac OS X, not to the .Mac Suite of Services, we recommend that you review in-depth support and usage information available at the iCal Support website <http://www.apple.com/support/ical/> .
For assistance with Apple products other than .Mac, please see the AppleCare Support website:
<http://www.apple.com/support/>
For help with products or services not provided by Apple, please refer to the product vendor or manufacturer.
Sincerely
Karim
.Mac Support Team
=====================
In the amount of time it took for them to send this non-answer to me, they could have forwarded it to what ever iCal experts they have.
Anyway, I replied and told them that this has to be their area, since the problem only arises after syncing with .Mac- iCal by itself works just fine.
We'll see where that gets me...
-Phil

Publishing Presentation to Private Server (Adobe Presenter 9)

I cannot get my entire presentation to show publish to my work's FTP server. The presentation will work perfectly when I publish locally on my computer, but once I move the folder to the FTP, the video will not appear. The audio and everything else seems to work fine.
Is there something I am missing when I copy the folders?
I haven't been able to find much info on this subject in general, as it seems I must be the only one not using Adobe Connect Server.
Any guidance is appreciated.

Hi
Please try different browser and confirm the issue.
Can you share the sample file with us ?
Please create a package file and mailto: [email protected]
also, Please share a content link where you have uploaded the content on the server if it is accessible from the public network.
I will try to resolve your issue at the earliest.
Thanks,
Sunil kumar sahu
Adobe Presenter Engg Team

Publishing on private server causes lags

After I upgraded to Lion, iCal started to "freeze" every now and then. For instance, when entering a new entry, iCal suddenly stops being responsive to key entries, and after a while picks up and shows all I have typed previously. I did a clean install and didn't solve the problem.
The problem appears to be the fact that I have a few calendars published on a "private server" (as opposed to MobileMe), namely icalx. I tried to remove them and re-insert them but no luck. After tinkering for a while and reading other threads, it appears that the "freezing" behavior occurs only when the option "Publish changes automatically" is checked. In this case, it's as if iCal starts updating the remote version while I'm still typing. In any case, I observed that while updating any calendar the entire iCal freezes.
Is anyone experiencing a similar behavior? Any ideas?

To publish calendars without .Mac, you'll need to configure a WebDAV server. You can follow these somewhat outdated—but still applicable—instructions to do so under Mac OS X here:
http://www.oreillynet.com/pub/a/network/2000/11/10/osxwebdav/osxwebdav.html
[You could also choose to use a Windows OS box as a WebDAV server, using software which runs on that platform.]
Background information on the mod_dav patch for Apache under Mac OS X is here:
http://www.webdav.org/mod_dav

No longer seeing Publish to private server after OSX/iCal upgrade

Hi,
After Upgrading to OSX Lion and updating Ical, I have come across a problem.
Excuse me if I do not get all the options and menu options correct, I'm using a dutch version.
I have been using Ical to publish the calendar of our business to our website for some time now, I publish it to an ftp server where a php script presents the calendar to the visitors. After the upgrade I no longer see the "publish to private server" option under publish. I now only see "share with everyone" and "share with invitees". It has since not been synchronizing. I hope someone knows a solution or can give me directions as to what I'm obviously not seeing.
Thanks.
Versions
iCal : 5.0 (1535)
OSX: 10.7.1

Calendars listed under your MobileMe login name (which reside on the MobileMe server) cannot be published to a web page. This facility is still available as before for calendars listed under 'On My Mac'.
MobileMe calendars can be shared privately to other MobileMe members (read-only or read-and-write); or publicly (read-only) to anyone with a CalDAV client - this includes iCal and Google Calendar (free subscription required for the latter).
Please see this page for more details:
http://www.wilmut.webspace.virginmedia.com/notes/sharedcalendar.html

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

Publishing to private server

I am interested in publishing my calender from my imac so that I can view it at work or from my portable ibook. I don't have a .mac account. Are there any private servers that allow people to publish calenders for free?

You could try setting up a private server on your iMac which you can then subscribe to from your workplace or iBook. This is what I have done successfully. A very helpful page has been written by Erik Ray at this URL:
www.macdevcenter.com/pub/a/mac/2002/09/20/ical_webdav.html?page=1
I had to make some changes to the software before compiling. Use an editor and change all references to uuid_t in header and .c files to kuuid_t because uuid_t is differently defined in /usr/include/unistd.h. Then follow all the instructions Erik Ray has given and publish! And then subscribe from another Mac. Works perfectly....(Many thanks to Erik for this page....)
John

Ical publishes 0KB file to private server

Hello. I am publishing one of my iCal calendars to a private server. It publishes, however there is no information in the file. It is a 0KB file. How can I encourage a successful publication?
Thanks!

Yes! Gosh it took several wacks, but SCALP is an iCal plugin that fixes the issue. Find the genius's work here http://pygmysoftware.com/software/scalp/

Cannot publish to Robohelp Server 8

Hello All,
Well let me start by stating that I am a systems administrator but I have had no experience setting up Apache, Tomcat or Robohelp Server.
This bomb has been dropped in my lap cause I am typically the goto guy. The company has an intranet site with a help section that was created and currently resides on a windows 2000 server with RSC 2.3, and RoboEngine 4.1. I have been tasked with setting up new server which will be windows 2003 server 32 bit OS.
Ok. I have followed all the Robohelp Server 8 getting started instructions (page5-6) on how to setup Apache Web Server with the Tomcat servlet for Robohelp server 8. I feel darn near 100% that I have gotten all of that correct. In other words everything tests correctly. I.e., going to http://localhost shows me the proper index.htm. I can access the tomcat manager using default UN and PW.
So I installed Robohelp Server 8 on the F:\Adobe RoboHelp Server 8\robo\server partition. I did create more than one context but am just trying to publish to the default robohelp. I create 3 areas. I do see the context's listed in Tomcat Manager and they all show as started.
I have created a simple project with one help file in Robohelp HTML software. I can generate it and it looks fine. I then configure the the WebHelp Pro Single Source Layout to publish to Robohelp Test Server, server *****WUIT002 (my test server), robohelp adds /robohelp/server automatically. I use admin, admin as username and PW. I attempt to select an area but get the error 'Unable to get area list from server'. Ok. that is not a good sign. But I save and attempt to publish anywho...to no avail(of course). I receive the message "Warning: Failed to publish to "Robohelp Test Server". reason: Unable to connect to the RoboHelp server on *****wuit002. If RoboHelp Server is not being used, generate WebHelp instead. More information on RoboHelp Server is available in the help file.."
I have looked at permissions to the partition and Robohelp server directory. I have basically completely opened them up just to see if that was the issue and I am still having a problem. Help Please. There is so little info out there regarding this product.

Hello John,
Thank you for your help. Hopefully you can shed some insight into this for me.
Here is the log directory zipped up.
Date: Fri, 4 Sep 2009 22:28:49 -0600
From: [email protected]
To: [email protected]
Subject: Cannot publish to Robohelp Server 8
Oh, one more thing, uvwaves. Regarding your note about, " I attempt to select an area but get the error 'Unable to get area list from server'."
I realize this is disconcerting, but usually not a problem and may be ignore (as you did.) If left blank, the "general" area is assigned by default.
However, the other error, "Warning: Failed to publish to "Robohelp Test Server" is quite another matter and hopefully the logs will help me.
Thanks
john
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
http://www.showmethedemo.com/
>

Error: MessageManager.publishItem : cannot publish private messages on a node unless it is configure

I do:
            var mi = new MessageItem("complexObjectNode", myUserMsg);
            mi.associatedUserID = _cSession.userManager.myUserID;
            mi.recipientID = budyUserID;
            collectionNode.publishItem(mi);
and get:
Error: MessageManager.publishItem : cannot publish private messages on a node unless it is configured to allowPrivateMessages
    at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::publishItem()
    at com.adobe.rtc.sharedModel::CollectionNode/publishItem()
    at SimpleChat/sendMsg()
    at SimpleChat/onItemReceive()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveItem()
    at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveItem()
    at com.adobe.rtc.session.managers::SessionManagerBase/receiveItem()
So i did this:
                    var nodeConfiguration:NodeConfiguration = new NodeConfiguration();
                    nodeConfiguration.allowPrivateMessages = true;
                    collectionNode.createNode("complexObjectNode", nodeConfiguration);
but I still get the error.

I figured this actually worked. I used the wrong nodeName.

Exchange 2007 / Outlook 2013 "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable"

One of our users is having problems setting replies from Outlook on his local PC. This is an SBS 2008 Server with Exchange 2007. The client PC is running Windows 8 with Outlook 2013. This issue doesn't seem to affect other users but this
is the only client with Outlook 2013.
When trying to set an automatic reply from within Outlook 2013 we get the "Your automatic reply settings cannot be displayed because the server is unavailable". Outlook seems to be connecting and working fine so connection to the server does
exist.
Trying this same operation from owa works without issue. Please let me know what we need to do to find a solution.
Thanks so much!

Problem:
IMAP downloads inbox don't work after November patches.
If you install a fresh OS and O2K13 unpatched ,the IMAP works fine.
Fully patched O2K10 works fine too.
It worked for my customer until November patch Tuesday broke the IMAP sync.
Consultant opened case.
Response from Microsoft:
        This is with regards to the issue faced by you due to regression         caused by November security update. This is further to inform         you
that fix is out and below is the download links for 32 bit         and 64 bit of the office suites. You need to apply all 3 hotfix.         The crash issue and IMAP issue would get resolved
immediately         while the issue related to Free / Busy and OOF not getting set         would take 24-36 hours to start working once the patch is
applied.
Below
        are the KB articles:
Description
        of the Outlook 2013 hotfix package (Outlook-x-none.msp):         December 10, 2013:
http://support.microsoft.com/kb/2825652
Description
        of the Word 2013 hotfix package (Word-x-none.msp): December 10,         2013:
http://support.microsoft.com/kb/2837674
Description
        of the Office 2013 hotfix package (       2013:
http://support.microsoft.com/kb/2849994
    Description of the Office 2013 hotfix package (   December 10, 2013:
    http://support.microsoft.com/kb/2849994
Issues that this hotfix package fixes
Consider the following scenario:
You have a SharePoint Server environment that has complex             workflows.
You implement the ReceiveTimeOut registry entry to             increase the global timeout to 90 seconds.
You click Open this task             button to open a workflow task in Outlook 2013.
        In this scenario, when you click any approval option from the         popup dialog box, you receive the following error message:
This task could not be updated at this               time.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A is located on an on-premises Exchange             Server, and User B is located on Cloud.
Both the on-premises Exchange Server and the Cloud enables             the Federation Trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached Exchange Mode for new and             Existing Outlook Profiles Group Policy settings and enable             it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode registry entry and set             to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
    Description of the Word 2013 hotfix package (Word-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2837674
    Assume that you open a meeting request in a separate window in     Outlook 2013. When you click
Accept and     then click
Send Reply Now,     Outlook crashes.
    Description of the Outlook 2013 hotfix package (Outlook-x-none.msp):     December 10, 2013:
    http://support.microsoft.com/kb/2825652
Issues that this hotfix package fixes
Assume that you have a recurring appointment that does not         have a subject. You make some changes to one instance of the         appointment and then save the instance. When you
try to open or         delete the instance, Outlook may crash. Additionally, when you         drag-and-drop one instance of the appointment to a different
time in the calendar, Outlook may crash.
When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
receive the         following error message:
Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
item.
Consider the following scenario:
Assume that User A has a mailbox that is located on an             on-premises Exchange Server, and User B has a mailbox that             is located
on Cloud.
Both the on-premises Exchange Server and the Cloud enable             the federation trust.
User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.
User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
the shared calendar.
        In this scenario, the shared calendar does not show any content.
Consider the following scenario:
You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.
You implement the Use Cached               Exchange Mode for new and Existing Outlook Profiles             Group Policy
settings and enable it.
        In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.
Consider the following scenario:
You have an Exchange Server that has Public Folders.
You create the Outlook Security               Settings folder under
All               Public Folders.
You publish the AdminSecurityMode
registry entry and set to a value of 1.
You configure Outlook 2013 to use cached mode.
        In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.
Consider the following scenario:
You have two Active Directory forests (Forest A and Forest             B).
User A and User B have their mailboxes that are located on             Forest A.
User A share his own calendar with User B with Full             Details permission.
User B add the shared calendar and let it sync.
You move User B’s mailbox to Forest B.
        In this scenario, the shared data in the shared calendar is         removed every second time that User A restarts Outlook. And it         is re-synced
when User A browses to the Calendar module.
Unfortunately TechNet isn't coming back, sorry folks :-(
The 3 patches above immediately fixed the issue for me!
Thanks so much!

I cannot edit project in project server after editing it in project professional

Hi
i cannot edit project in project server 2013 after editing it in project professional.
i.e I created an enterprise project in project server and then edit it with project professional. after i published it to the server and open it with project server, it shows the changes. but when i click on a cell, suddenly the task list and gantt table
hidden!!
it happens even if I start a project with project professional.
I'm the admin user.
what's the problem?
Thanks.

CU means cumulative updates, which are intermediate bug fix packages between SP. The latest CU for Project 2013 was release on September 12th. See reference
here.
Can you try to reproduce the bug with
IE in compatibility mode?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Connecting Gamecube to Macbook to access private server

I hope someone out there has managed this and can help.
I am trying to connect my old Gamecube to the internet via my Macbook's wireless connection in order to play Phantasy Star Online (I know, I know, I was just feeling nostalgic).
The game is now being hosted by a private server.
http://www.schtserv.com/connect-psogc.php
They have included directions on how to connect to a pc laptop with aid of a DRDNS a program that basically directs the gamecube to the new server. The program is not mac compatible.
Here are the directions: http://schtserv.com/forum/viewtopic.php?f=19&t=42
I have connected my gamecube to mac via ethernet cable. I tried manually configuring the network settings in the gamecube so that it connects to my mac. I was successful that far. What I cannot seem to do is get my mac to route it to the right server. I tried inputting the dns server manually and that did not work.From what I have read the gamecube needs to be tricked into thinking it has reached the old sega server. How can I accomplish this?
My Mac:
Model Name: MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz

i can't see the pg from where i'm at now but it looks like they are making changes to some dns settings. think you might be able to make changes to the hosts file, but not sure.
JUST FYI for now: http://decoding.wordpress.com/2009/04/06/how-to-edit-the-hosts-file-in-mac-os-x- leopard/

Cannot publish to a private server

Similar Messages

Maybe you are looking for