Cannot publish to MobileMe. Error says, "iWeb couldn't connect to MobileMe. Make sure your Internet connection works and try again." Connection is OK!

My site will publish to a folder, but will not publish to MobileMe. Error says, “iWeb couldn’t connect to MobileMe. Make sure your Internet connection works and try again.“ Connection is OK!

Thank you Alancito for your reply. The recent post you suggested was not necessary because another of your suggestions did the trick: https://discussions.apple.com/message/11503337#11503337 In effect, it seems to have reestablished my connection to my MobileMe account, and my iWeb site now publishes on MobileMe.
My next step will be to transfer my iWeb site to another Personal Web Provider when MobileMe ceases to exist next June. Any recommendations for a simple PWP?
Thank you very much,
William Oglesby

Similar Messages

ITunes cannot connect to iTunes Store. Make Sure Your Network is Active and Try Again.

Hi,
Every Time i open itunes, i get this error message. I know that i am not connected to internet, but some how i want to remove that error message. It's kind of pain in brain. Because when i work on other application, sometime's i want to listen songs, so i just press shortcut key(play/pause key) from keyboard to open the itunes, but everytime i have to click on the error message. So please if anyone knows how to avoid that error message or try itunes not to connect to itunes store automatically. Then please tell me how to do that.

Did you find a resolution as I'm having same problem?

You cannot signed in at this time please check your mobile network setting and try again..

Please help me i can't login in skype...my phone is android the brand is oppo and the model is joy plus...my problem is i can't login in skype...when ever i login it's always says YOU CAN'T SIGNED IN AT THIS TIME PLEASE CHECK YOUR MOBILE NETWORK SETTING AND TRY AGAIN......please help me...somebody who can help me...please what will i do?

Hi! We tested the issue on HTC ONE M8 device and couldn’t reproduce the issue ourselves. Did you experience the issue while you logged in the first time after installing Skype on your device? Could you please give more details about this issue – exact steps how to reproduce that, Skype version number, exact OS version, network type? You can find more details about specifics we need to know from here: http://community.skype.com/t5/Android/How-to-create-a-good-Android-issue-report/td-p/211384.

Error: "We're having a problem opening this location on file explorer. Add this website to your trusted sites list and try again"

Hello,
When i try to open document library from SharePoint Production portal then it throws the specified error. However, when i open document library from SharePoint Development portal then it opens it in file explorer quite easily.
Production portal is on https whereas development portal is on http. Also, UAG has been configured on production portal.
Any idea where it's getting stuck up? Surely, this is not a browser issue on Windows 7 as it's opening the development portal's document library on the same machine.
I've also done following things:
- Configured Desktop Experience on production environment
- Installed the hotfix for Windows 7
Regards,
Sohaib
Sohaib Khan

Hello Sohaib.
Here is the list of causes defined here.Hope it helps you
The cause and the resolution methods are the following:
Cause: There is a missing Root site collection...
Resolution: Check and ensure, that the “Managed Paths” are not changed in the web Application’s page, there is a (root) explicit for
this web application and there is a working Root site collection.
If for any reason this is not the case in your environment, you may try the following:
- Apply (if not already) the following Hotfix to one of those clients:
Error when you open a SharePoint Document Library in Windows Explorer or map a network drive to the library after you install Internet Explorer 10 in Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2846960
Then, try to delete the cache of the IE browser before reproducing the issue. Check the result..
- Try to temporarily disable the Antivirus and test again.
- Check if you have installed the Desktop Experience feature on the SPS13 server.
- Check if you face this behavior with all users, Or only with some specific ones, Or with all different client OSes..
Otherwise you will need to collect the logs to further analyze...
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/sps13-quot-open-with-explorer-quot-random-error-quot-we-re-having-a-problem-opening-this-location-in-file-explorer-add-this-web-site-to-your-trusted-sites-list-and-try-again-quot.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

HT201210 Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is do

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger

Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected]

Moved my library to an external hard drive. Now I get this message when trying to import video: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again.

I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.

My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action.

Error -6753 Make sure your internet connection is valid and try again. Help

So I just dropped nearly $200 on an airport extreme to throw my desktop PC and wireless mac into a network (since my router just gave out). I had a hard time connecting to the internet, and then magically I got the internet working, but when I open airport utility to configure security settings or update firmware I get:
"An error occurred while trying to access the base station. Make sure your internet connection is valid and try again. Error -6753"
How do I get rid of this? Any suggestions

Error -4 is almost always an indication that the connection between the AirPort Utility application and the AirPort router is is being blocked by....
1) The Windows Firewall
2) Microsoft Security Essentials...if installed on your PC
3) The anti-virus software
4) 1&2, or 2&3, or 1&3, or all of the above
When I used to use a PC, the only way that I could ever get the AirPort setup was to turn off all of the items above, configure the AirPort, then turn everything back on again.
Life would be tons easier if you had an iPhone or iPad to configure the AirPort Extreme, or you could borrow a Mac for a few minutes.

I have an iphone 6 plus which show iphone disable connect to itunes. i tried to restore but it won't work and everytime it says "Iphone "Iphone" could not be restored because firmware file is corrupted disconnect and try again later"

last night while i was sleeping at somone has tried to open my passcode if Iphone 6 plus model A1524. Now i cannot see the passcode screen and it just saysi phone is disable connect to itunes . Then i decided to restore my iphone and i have download almost 4 firmware files (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.0_12A366_Restore.ipsw and iPhone7,1_8.0.1_12A402_Restore.ipsw and fourth one is iPhone7,1_8.2_12D508_Restore.ipsw.part) and restore (by holding shift in itunes and selecting file ) using itunes ( which is current version 12.1.2.27 64 bit) but for everytime two of them(while extracting ) which are (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.2_12D508_Restore.ipsw.part) it says "Iphone "Iphone" could not be restored becuse firmware file was corrupted please disconnect and try again later" .i have tried to download "iPhone7,1_8.3_12F70_Restore.ipsw " manually and via itunes (when i download and restore using itunes it says
"There was a problem downloading the software for the iPhone ''iPhone'' A unknown error occured (9006).
Make sure your networks settings are correct and your network connection is active, or try again.''
but nothing works (While for rest of two it says firmware file is not compatible).. I'm tired of these now as i'm working on this problem for 5 days ...
Please help me as soon as possible..
sorry for my poor english..

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Message: App World Web Plugin Error An error has occurred communicating with the BlackBerry App World Web plugin. Please restart your device and try again. If you have content protection enabled on your device, please disable and try again.

This has been my problem ever since. I haven't downloaded any app yet via computer. Help me guys.
Solved!
Go to Solution.

Hi Lhea
Welcome to the Community
If you're using a Chrome or Firefox, I suggest you use Internet explorer for the meantime, once the plugin has been intalled on the browser, since Chrome and Internet explorer almost share the same settings, it should work well with Chrome after it.
Please leave a post if you have any further questions.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Pop up says " Something went wrong" in the title then reads, "Please wait a moment and try again. If the problem persists, try logging in." . I can't think of any new updates on my phone but many apps are getting updated without me keeping track of them

how can I fix this?

I tried mine in Safe Mode and the pop up box disappeared for a few hours
but then was back. This has been going on for over a week and it's driving
me nuts!
<< Personal information removed to comply with Verizon Wireless Terms of Service >>

Anyone else having this problem?: iTunes movies download successfully, but the iTunes Extras keep downloading down to 99% and then quit, saying I should "make sure to have connection and try again".

This has already happened with two of the movies I purchased. I can watch the actual movie, but when I try download the Extras, the same error keeps popping up. "Make sure your network is active and try again." The movies downloaded just fine, why not the Extras?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Cannot Publish to Word Error - Captivate 7, MAC

I'm getting this error even though I was successful before (last week was the latest). I have gotten this before and it magically went away. I have closed down my computer and restarted and also have opened up word. Help!

pshuckhart,
What other programs are running when you try to do this? I
know from experience that many clip board extenders and/or macro
programs (Classic Clipboard, MacroExpress, etc.) can cause the
print option to fail. You may want to try closing/turning off any
other programs that you have running to see if any of them are
causing the failure.
quote:
Originally posted by:
pshuckhart
When I try to publish a Captivate 2 file to Word Handouts,
the export seems to work and I get the dialog box to View Output,
but before I click on View output, I get an error message -- An
error was encountered while Publishing to Word. Please check and
make sure Word is not busy and try again.
I have checked the path for the new file and it seems valid.
I have tried with Word open and closed. I am using Word 2003
Any ideas?

HT201269 On my new phone I am getting an error message that says "connection unsuccessful" make sure Sync is turned on and in range

i have an IPhone 5 and am getting an error message that reads
Connection Unsuccessful. Make sure SYNC is turned on and in range.
My bluetooth is on and I don't know where to turn SYNC on

Unpair your phone, then re-pair accd'g to Ford Sync instructions.

I cannot order photo prints from iphoto. Error says that the delivery address is in an unsupported country. The address and my account are in the UK. Does anyone have any ideas?

I cannot order photo prints from iphoto. Error says that the delivery address is in an unsupported country. The address and my account are in the UK. Does anyone have any ideas?

I cannot order photo prints from iphoto.
Are you trying to print from iPhoto on your Mac or iPad/iPhone? If you are trying to print form yor Mac, check, if the Print Products Store in the iPhoto Preferences > Advanced is set to U.K.
Also the bimmling address, Delivery address, the country for your AppleID and Credit Card must all be in the same country. Check this document:
http://store.apple.com/uk/help/print_products
-- Léonie

Cannot publish to folder - message says "Can't create the file...."

Can't create the file "Momoola.com." The disk may be damaged, full or you may not have sufficient access privileges.
I havent' changed anything since the last time I published to this folder. I ran Disk Utility and Repaired Permissions in case that was the problem, but I'm still getting the same error message.
Don't think disk is damaged. Have about 7 gigs left on HD, so that's not it.
Any ideas?

I can offer a shotgun effect fix but don't know if any a definite fix for this. Try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
reboot.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Cannot publish to MobileMe. Error says, "iWeb couldn't connect to MobileMe. Make sure your Internet connection works and try again." Connection is OK!

Similar Messages

Maybe you are looking for