Cannot Publish to ZCM, error 14

I have created a ZAV Excel application using the built in templates (ZAV9). It works fine, but now I am trying to publish this to our ZENworks Zone (10.3.3)
After I enter all of the Bundle information and click Publish Now, I receive the following error:
"An error occurred while publishing the bundle: 14/~Bundles~"
Please help!

pcwoodring,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

  • Cannot publish anything. Error Status: 503,105002

    Please help! cannot publish anything from Muse. It says that it is an unknown Business Catalyst error.
    Thanks, Russ

    Maintenance underway - http://forums.adobe.com/message/6243834#6243834.
    http://status.businesscatalyst.com/
    Thanks,
    Vinayak

  • Users cannot publish and get error message

    Hey everyone. This one is stumping us here at the office.
    Some clients have been having a problem publishing things they have
    worked on from both their home AND their office. The error message
    they have been getting is
    quote:
    Contribute encountered a network or file system error. Please
    try the operation again, and contact the administrator if the
    problem continues to occur.
    I have done a number of google searches for this error and
    came up with next to nothing. The users are both connecting from XP
    machines using contribute 3, which is the same set up we have here
    at the office. They have been able to connect in the past and
    publish things, this started maybe a week ago.
    Any one have any suggestions?

    Also this post has suggestions:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=55&catid=290&threadid =1283908&enterthread=y
    Knowledge base:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_16592&sliceId=2

  • Cannot Publish to Word Error - Captivate 7, MAC

    I'm getting this error even though I was successful before (last week was the latest).  I have gotten this before and it magically went away.  I have closed down my computer and restarted and also have opened up word. Help!

    pshuckhart,
    What other programs are running when you try to do this? I
    know from experience that many clip board extenders and/or macro
    programs (Classic Clipboard, MacroExpress, etc.) can cause the
    print option to fail. You may want to try closing/turning off any
    other programs that you have running to see if any of them are
    causing the failure.
    quote:
    Originally posted by:
    pshuckhart
    When I try to publish a Captivate 2 file to Word Handouts,
    the export seems to work and I get the dialog box to View Output,
    but before I click on View output, I get an error message -- An
    error was encountered while Publishing to Word. Please check and
    make sure Word is not busy and try again.
    I have checked the path for the new file and it seems valid.
    I have tried with Word open and closed. I am using Word 2003
    Any ideas?

  • Cannot publish 1 page in CS4. Other pages including index.html ok. Error message results.

    After many months of no difficulty, I suddenly cannot publish changes to one of my pages (all others work) without getting the error message 'Another instance of Contribute is doing a workflow operation. Do you want to break the workflow and continue.....?' Whether I say yes or no and follow the prompts, it doesn't work. One way lets me exit, the other locks up my computer and I have to 'end task' to get control back. I hoped that the answer to the 'cannot publish index page' thread would help, but I didn't understand because most of this stuff is over my head. The only thing unusual I can dectect is the page name has an # sign after html as in 'name.html#tuition.' The word tuition refers to a pointer on the page. When I switch to edit mode, an asteric * appears after 'html' on the page name. I do not see that on any other page when I edit. I have CS4 version 5. Can anyone help? I don't know how many people there are in India, but I talked to half of them in a 2.5 hour 'session' in which I was transferred in a least 3 complete loops to every department and passing 'go' 3 times before some techie finally said I should email my question in and will get a reply within 3 days. Yeah, right. Worst tech support experience I have had in 10 years.

    Hi,
         Can you try deleting the Preferences and the Contribute's User Configuration folder. You will lose your website connections, you can recreate them again after relaunching Contribute.
    If you have installed Contribute in Mac, go to <Username>/Library/Application Support/Adobe folder and delete Contribute CS4 folder there. Also, go to <Username>/Library/Preferences/ folder and delete the 'Adobe Contribute 5 Preferences' file.
    If you have installed Contribute in Windows XP, the Contribute's Configuration folder will be in C:\Documents and Settings\<your username>\Local Settings\Application Data\Adobe\. Delete the Contribute CS4 folder there. To clear the registry for Contribute, type 'regedit' in the Run window.(Click Start, and click Run, and then type 'regedit' in the text field.) Select HKEY_CURRENT_USER, then Software, then Adobe, then Contribute CS4. Click Delete button. Close the Registry Editor window.
    The <username>, I have mentioned above is the name with which you will have logged into the machine.
    Now, Relaunch Contribute and connect to your website and try editing the web pages from your website. Can you try this?

  • Have version 6.1 on my iPhone5 and can't download videos to You Tube. Get error message Cannot publish. Help

    Have version 6.1 on my iPhone5 and can't download videos to You Tube. Get error message Cannot publish. Help

    update to the latest iOS version.

  • Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

    Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
    Any other ideas?

    Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
    <Link Edited by Host>

  • I got this error: 503,0. And I cannot publish my new update?

    I got this error: 503,0. And I cannot publish my new update?
    I only change a word in the Iphone and would publish this, - and then got this message below?
    And now cannot publish, - what is this?????

    Hello Hanna,
    this happens due to the migration going for Business Catalyst at this moment. Status is updated here: http://status.businesscatalyst.com/
    More details here: http://adobebcmigration.com/
    Regards,
    Cristian Radu

  • Error: MessageManager.publishItem : cannot publish private messages on a node unless it is configure

    I do:
                var mi = new MessageItem("complexObjectNode", myUserMsg);
                mi.associatedUserID = _cSession.userManager.myUserID;
                mi.recipientID = budyUserID;
                collectionNode.publishItem(mi);
    and get:
    Error: MessageManager.publishItem : cannot publish private messages on a node unless it is configured to allowPrivateMessages
        at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::publishItem()
        at com.adobe.rtc.sharedModel::CollectionNode/publishItem()
        at SimpleChat/sendMsg()
        at SimpleChat/onItemReceive()
        at flash.events::EventDispatcher/dispatchEventFunction()
        at flash.events::EventDispatcher/dispatchEvent()
        at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveItem()
        at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveItem()
        at com.adobe.rtc.session.managers::SessionManagerBase/receiveItem()
    So i did this:
                        var nodeConfiguration:NodeConfiguration = new NodeConfiguration();
                        nodeConfiguration.allowPrivateMessages = true;
                        collectionNode.createNode("complexObjectNode", nodeConfiguration);
    but I still get the error.

    I figured this actually worked. I used the wrong nodeName. 

  • Cannot publish iMovie project paramerr: error in user parameter list

    When trying to publish imovie project, getting message:
    Unable to prepare project for publishing.
    The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)
    Can anyone help explain what to do?  My first project.
    Thanks!
    Rick

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • The project could not be prepared for publishing because an error occurred. (-50)

    I made an 18 minute video, tried to export it using iMovie '11 to iTunes/Media Browser/iDVD everything. Everytime I get this message 'Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)'. I tried the time machine snapshot thing, I set all teh acces to Read/Write and restarted my computer. I have over 70GB on my computer, which is more than enough for a 540 MB film. What does the -50 mean, and how do I solve it. Thank-you.

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • Will not share Imovie with Idvd. Gets so far and then a box saying Unable  to prepare project for publishing because an error occured (-41)

    Cannot SHARE project from IMovie to Idvd. Gets so far and then a box with a message saying Unable to prepare project for publishing because an error occured (-41).

    Bengt is as always entirely correct, but another meaning of error -41 is that you have chosen the wrong encoding setting for the length of video you have:
    iDVD encoding settings:
    http://support.apple.com/kb/HT1502?viewlocale=en_US
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
    Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t.  The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • Hi, i cannot publish my iWeb site with  a non mac domaine name...can anyone help please?

    hi, i cannot publish my iWeb site with  a non mac domaine name...can anyone help please?

    Hi, I have a site developed by myself usinf iWeb and as iWeb are no longer hosting teh sites in 2012 i have found another domaine. It is with Go Daddy and the domaine / name is live. I have tried to publish site using fttp but keeps coming up wih a common error message saying the info i have input is incorrect. I have tread this may be an issue if host is a windows based host???
    appreciete your help

  • Cannot Publish in ADI ver 7.2.4

    Hi,
    Is this a known bug issue? I have a correct tnsnames file, and all correct passwords, however I still cannot publish reports.
    I was told that this is a known issue with ADI ver 7.2.4. I am trying to find a web page from Oracle that acknowledges this bug, but I cannot find it.
    Anyone know the bug in ADI and where I can find info about it? I tried to Google it, however it didn't come up. Or is anyone running 7.2.4 and able to publish?
    Thanks in advance!!!

    I am using ADI version 7.2.5, but I think we were using that version before.
    Are you saying that you are able to log into ADI, but when you submit a report,
    you receive an error message?
    What does the error message say?
    I recall having an issue before, because I forgot to include the
    'FND...' entries in the tnsnames file..
    Mark K

  • Cannot publish .mp4 with AdobeCaptivate 7

    Hello,
    I cannot publish mp4 files. I creted a software simulation and want to publisg this as an mp4 file.
    The AdobeVideo publisher starts and quits immediatelly. I gave had this with Captivate 6 as well but back in the day I was not using this feature so I did not deal with it. Now that i need it I cannot work!
    I am using MAC and mountain lion on my iMac and Maverics on my laptop.
    Also checking the applications folder it seems that videopublisher is not properly installed. I have unistalled and reinstalled several times but no change. My IT dpt. tried as well and no joy.
    The files generates but it is 0bytes as you can see:
    I have heard about the issue before but I have searched throughout the web and your forum and could not find a resolution to my problem.
    Can you please help me?
    Regards,
    Argi

    I am using ADI version 7.2.5, but I think we were using that version before.
    Are you saying that you are able to log into ADI, but when you submit a report,
    you receive an error message?
    What does the error message say?
    I recall having an issue before, because I forgot to include the
    'FND...' entries in the tnsnames file..
    Mark K

Maybe you are looking for