Cannot pull business card from N82

I wanted to pull all business cards from N82 to CAR KIT via OPP.First CAR KIT sent OppcPullBusinessCard message to N82 with vcard type"text/x-vcard". N82 returned OPPC_PULL_BC_START_IND to CAR KIT,but the packet length is zero in the message. Then CAR KIT sent OppcPacketComplete and OppcPullNextBcPacket messages to N82,and it returned OPPC_PULL_BC_COMPLETE_IND to CAR KIT with cause"Server couldn't understand the request".
Can anyone tell me the reason?
In addtion,I have two questions to ask:
1.Does N82 support operation of business card being pulled?
2.If N82 support operation of business card being pulled,is vcard type"text/x-vcard" right?If it not right,what's the right vcard type?

thanks for the reply
unfortunately it does Not show up in either desktop or Disk Utility
however, there is "card icon" shows up in top menu bar, indicates the system recognise the card.
when click on That icon there is one option on the drop down menu says: Power Off Card
I clicked on it, nothing happened. the expresscard did not physically eject itself

Similar Messages

How i can receive business cards from others....?

i don't know how to receive business card on my i phone.....though i know i can the contact through the share option.....can any genious or tech person help me ........................

Now, do I need to create new communication channel (Sender)?
Only one sender channel will be required.....the one which gets the message from ECC......other will be the SOAP receiver channel.
In what format is ECC sending the request....it should be PROXY/ RFC since it is a synchronous call.
My service interface has request, response, and fault roles. Also its mode is synchronies. But I couldn't get vendor
response.
Are both the (outbound and inbound) services interfaces defined as Synchronous?
Is the proper wsdl imported in ESR from the vendor?
Are you atleast able to see some response node generated in the processing entry in SXMB_MONI?
Regards,
Abhishek.

Lumia 800 cannot receive business card

Hi
I have brought lumia 800. unexpectedly my wife send me business card to me. The sendding mobile shows as delivered and my lumia 800 not even shows a notification by sound/sms/light...
I tried with several phones. result same..
Please let me know the cause of the issue at the earliest... Its annoying to know my phone not having some basic features.

2 things. this is the wrong place for this post. this is the updates page
2nd have u tried sending it trough bluetooth to check
and has the lumina possibly auto saved it as contact already

How to get out the business card from cd pocket on macbook pro ??? please help !!

my child put a business card to the cd pocket !! please let me know if there is any way to get it out ???

Oh... don't forget to send your kid the bill
The other thing to try is to wrap double sided tape on a tooth pick and try to insert carefully and try to get the card to stick to the double sided tape, then extract.

Thunar cannot mount SD card from built-in reader

Recently, Thunar has not been able to auto-mount my SD card from my laptop's built-in card reader. It was able to do this before without a problem. It seems to be a permissions problem, because Thunar can mount the card just fine when ran as root. This is the error message Thunar throws when I plug in my card and it tries to mount it:
Failed to mount "SD/MMC Drive".
Rejected send message, 1 matched rules; type="method_call", sender=":1.60" (uid=1000 pid=19231 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=2535 comm="/usr/sbin/hald)).
How can I fix this so that Thunar will be able to successfully auto-mount my card as a user?

I fixed this by launching my session with PolicyKit (from this thread):
.xinitrc
eval $(dbus-launch --sh-syntax --exit-with-session)
exec ck-launch-session SESSION_HERE
Last edited by linkmaster03 (2009-12-20 20:25:45)

How to send / receive business card from other mobile phone?

i can't find how to send business card, like at Nokia phone.
and i can't receive it too.
need help .

And when do you think we could get that feature? Very essential when exchanging contact details with people. Had I anticipated this, I would have stayed with other brands.

Cannot eject SD Card from S6000

After inserting a 32GB SD card into the slot in S6000, I find that I cannot eject it out anymore. I suppose, I need to press on it so that it springs back, correct? But no luck yet.
Any ideas, please?

Hi, and welcome to the Palm Community Forums.
One way is to use Card Export from www.softick.com . There might be freeware alternatives but I don't know.
Post relates to: None
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

I cannot pull up pictures from iphoto. I see them but when I click on them, I get an exclamation mark inside a triangle

I cannot open pictures from iphoto. I see them but when I click on them, I get this exclamation point inside a triangle

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Cannot start Business Catalyst from Dreamweaver CS 6.

I have a x64 Windows 7 operating system and have CS6 Dreamweaver installed. I have the Master collection and have a subscription to the creative cloud. When I click under Site - "New" Business Catalyst Site.... A dialogue box opens up that says Business Catalyst on the title bar but the box is white and then disappears. On the right side where it has the Business Catalyst tab that says "Login" and the button does nothing. No response at all. If I select Site -> Manage Sites and select either Import Business Catalyst Site or New Business Catalyst Site the
dialogue box opens up that says Business Catalyst on the title bar but the box is white and then disappears.
Everything else works (I can log in to the Phone Gap service), but anything related to BC will not work at all. If I login using Muse all is ok. Muse is on same machine as dreamweaver CS6 .On another windows 7 machine using dreamweaver cs5.5 I can log in to BC just fine. Just from dreamweaver CS6 I have this problem. Any help would be appreciated.

You say "once you subscribed ...."
Does that mean you had the DW stand alone from Master collection installed then subscribed to the cloud?
If so, you may be experiencing a conflict in registered users. Is your DW registered to the same Adobe ID of your Business Catalyst stuff?
Just trying to eliminate possible causes.

New itunes card I got at Ralphs when I pulled the card from the backing you can't read the pin numbers. the card sould be able to be scaned to show that it is good but they wouldn't . how can I use my card now?

bought an iTune card when I took the paper off the card the glue took part of the pin numbers. The card should be able to be scaned, how can I use this card now Ralphs can't help thats were I bought the card

iTunes Store: Invalid, inactive, or illegible codes

I cannot sync passbook card from the mac to the iphone

Can somebody help

Figured it out.
Apparently, the Mac App Store can see the app if it is installed on an external drive. I have a backup drive attached to my iMac that also contains backups for my MBP - the MAS was seeing the app on the MBP backup partititon, and assuming that I had it installed. Oy. Thanks for trying to help...

I remember accidently pressing the import all photos instead of the 10 that i wanted, so i clicked delete. Also i always just pull card from computer & get a error when it do it

I remember accidently pressing the import all photos button instead of the 10 photos that i wanted, so i clicked delete. Another thing i always just pull camera card from computer slot & then get a error when it do it saying i shouldnt do it that way, I just never knew what to do. Sorry I am so ignorant when it comes to computers. I hope you can help this silly blonde

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

After Upgrade into SP 2013 Business data from other SQL DB

Hi All, We are in process of SP upgrade from 2010 to 2013. We had a basic form in 2010 that was designed using SP Designer 2010. Now after the upgrade, we need to add few new fields (some might be drop-down lists) which will pull business data from SQL Server.
Could anyone guidelines as how to approach for this?
My findings & Thoughts: I need to BDC Service Applications (Any specific system requirements to create one in 2013?), then I need to create External Content Types. I need to add newly created external content types to my existing custom content
type(?).
Wondering if there is two way data synchronization available? Meaning say if user has drop-down available which pulls data from SQL Server, If user want to add new items in it. Would it update that field in SQL?
Any thoughts? Any reference would be appreciated.
Regards,
Khushi

Hi Khushi,
Hope these links help you-
http://code.msdn.microsoft.com/SharePoint-2013-Create-ffc9af9f
http://msdn.microsoft.com/en-us/library/office/jj220063.aspx
http://technet.microsoft.com/en-us/library/ee661740.aspx
http://blogs.msdn.com/b/sharepointdev/archive/2011/12/26/understanding-business-connectivity-services.aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

Make business cards

I'm halfway figuring out how to make business cards from other programs I've used on different computers. But halfway on my MacBook with iWorks 9 ! The problem I run into is creating ONE on a sheet of 8 or 10, then how to make all the others the same. "Duplicate" is very awkward and it's almost the same as creating 10 separately then they aren't identical. In Word, I could make one then tell it to fill the page. I could use a blank document or any of the pre made business cards, same problem duplicating...
I also wish there were an Avery hook up.

When I do this and there isn't an automatic feature in the application I first duplicate once, position it and then group the two cards. Now I duplicate that and group again having now 4 cards. Duplicate again and you have 8 cards!
You could also try Option and drag to duplicate and position the card/s

Importing Business structures from OIM to OIA

Hi All,
OIM OIA Integration Preferred Method does not list the import business structures job in the list.
When I tried to run the import job with OIM integration, It throws me unsupported operation exception.
Is there any restriction that OIA cannot read business structures from OIM and accepts only from a file?
- Can this be executed with a customized code written at any part of OIA?
Thanks in advance.
Krish.

Hi,
Did you able to resolve this issue?
Thanks,
Pallavi

Cannot pull business card from N82

Similar Messages

Maybe you are looking for