Cannot re-boot after enabling K8T Neo LAN Connection

I've tried to enable the K8T Neo LAN controller in BIOS so that I can connect a Wireless Router to my PC. However, when I do this, the PC will not boot and I have to disable the LAN controller.
On booting-up the BIOS seems to be looking for an ethernet controller and a message states that either the device is not plugged in or the cable is faulty ! Why should enabling the onboard LAN controller affect the device the BIOS boots from ?
Can I plug a Wireless Router directly into the RJ45 LAN connection on the K8T Neo and if so, how ?
Thankyou for any helpful advice

Check to make sure you are not set to boot from network. Unfortunately I can't remember the exact name or where it is located, but it may help.
Quote from: Geps on 07-July-05, 22:52:17
as you say: a WIRELESS router is WIRELESS, how could you plugin a cable from a wireles router. or does it also have rj45 conectors?
if you want to use the wirreles function, you will need to buy a wirrles lan adapter (usb) for your pc
I have never seen a wireless router without rj45 connectors. (WAP yes, router no).
Good Luck
Jeremy

Similar Messages

Booting "issues" with K8T Neo-FIS2R

Well hello everyone. First of all I want to say that my English isn't completely error-free and my problem might seem awkward because of my ways of expression.
I also want to say that i've read alot of threads and searched the forum for my problem.
For a couple of days ago I got all my parts for building my 64bit-system and I build her up. To my suprise it booted, with almost no errors. Although I could install Windows XP and use it completely, everytime I boot it (under the booting sequence) it says "Bios is not installed", although I can enter bios simply (like everyone else) just pushing the DEL-button.
But this isn't the only problem. When I enter PC Health Status it says that the cpu is running at whooping 62-65 degrees. When i have my hand around the cpu-cooler it doesn't even feel warm so I think it has something to do with my BIOS-version that i am running now (Yes, I've read that in much more threads)
Also I have problems using the Cool'n'Quiet technology. I have it supported in the BIOS and activated it although it will not work (maybe it has something to do with the bios?) With this i mean that i will not go underclocked (It's allways 2.2 GHz)
My final problem is that it sometimes takes the system 2 minutes to boot sometimes, it happend after i flashed the bios to 1.7 from 1.0
Under these circumstances I've used 1.0 AND 1.7 BIOS-versions.
I've never overclocked the computer either.
What could be wrong?
I'm using 3200+ 2.2GHz Athlon 64 cpu.
K8T Neo-FIS2R
Radeon 9800pro
Seagate 7200.7 200GB drive.
380W Antec PSU.

Quote
Originally posted by $post[username]
I've tested notebook, minial power savings and battery. C'n'q still doesn't seem to work. Yes i've enabled it in bios. I downloaded the AMD Athlon™ 64 Processor Driver for Windows XP, Version (zip) 1.1.0.14 -
Yesterday my CnQ began to work fine. I've done the same as you:
1- Enable CnQ Bios option
2- Install the AMD athlon64 driver for XP
3- Set "minimal power savings" at windows xp energy options
I have installed the CoreCenter 1.6.8.0 (is the last version) utility, and I've set enable the CnQ in this application. You'll can see that the CPU velocity change "on demmand" and the CPU fan too.
Of course, I've the last VIA 4in1 drivers, 1.7 Bios ver. etc
My temp & MHz values are:
~40ºC ~ 800 MHz idle
~50ºC ~ 2000 MHz playing or that kind of stuff
Note that the PC case is open, because the PC is under my table and there is no good ventilation.

Registry/boot problem with K8T Neo mobo (solved)

I got similar problem: https://forum-en.msi.com/index.php?threadid=40752&sid=
Though my error message is: "Windows could not start because the following file is missing or corrupt:\WINNT\SYSTEM32\CONFIG\SYSTEM"
I did NOT have this problem before i enabled the Realtek gigabit ethernet controller in BIOS.. But now when it is enabled everything runs/installs/reboots fine... until i shut down and when i turn power on next day i get that error message.
So: when Realtek 8169/8110 gigabit ethernet NIC is enabled in BIOS, necessary drivers installed and system shut down, registry get corrupted while shutting down.
I had AMI BIOS 1.1 when got this first time (after enabling realtek), flashing to 1.2 didn't help.
I also tried newest realtek 8169/8110 drivers (5.611.1231.2003) instead of original (5.606.811.2003)(they're still in msi neo-fis2r page i see) but it didn't help either.
So, any suggestions? i believe the integrated realtek causes the problem because it didn't occur before i enabled it from bios->integrated stuff... or is there any other possible reason?
oh, msinfo32 says that radeon 9800XT, IEEE1394 controller (firewire in audigy2) and realtek controller share the same IRQ 16.. i removed firewire controller but it didn't help.. could radeon and realtek sharing the same IRQ be the problem?

Didn't try the external yet, i'll still try something with this.
:: Do you have a home network setup, or connect straight to modem?
straight to modem.
i doubt it is the audigy, it worked before... and i've disabled everything i don't need like onboard audio, onboard 1394.. (never installed 'em)
i noticed one thing: all people with similar problems are running win2000 SP4, you run XP so it's ok.
MS knowledge base says "If one or two registry hives consistently become corrupted for no reason, the problem probably occurs at shutdown and is not discovered until you try to load the registry hive at the next restart. In this scenario, the registry hive is written to disk when you shut down the computer, and this process may stop the computer or a component in the computer before the writing is completed." http://support.microsoft.com/default.aspx?scid=kb;en-us;822705
so something (realtek?) is writing to the registry while i shut down the pc.
i'm gonna disable realtek before shutdown & see if it boots without errors... if it does, i'll just have to disable it *always* before shutdown.... sounds like driver error for me?

Cannot run system after enabling SSFS

Hello,
I followed note 1639578 when setting SSFS. I would like to install EHP7 and SSFS connection is prerequisite.
Everything went according to steps, but after I set environment variable rsdb_ssfs_connect=1 and profile parameter rsdb/ssfs_connect = 1 my system refused to start. All disp+work processes are down few seconds after I restart the system.
r3trans -d shows:
C:\Users\steadm>r3trans -d
This is r3trans version 6.24 (release 741 - 04.02.14 - 20:14:02 ).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_o
ra_tnsname = 'STE'"
r3trans finished (0012).
trans.log contents:
4 ETW000 r3trans version 6.24 (release 741 - 04.02.14 - 20:14:02 ).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 23.06.2014 - 14:39:31
4 ETW000 control file: 4 ETW000 R3trans was called as follows: r3trans -d -w c:\trans.log
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [     dev trc,00000] Mon Jun 23 14:39:31 2014                                                 109 0.000109
4 ETW000 [     dev trc,00000] db_con_init called                                                        29 0.000138
4 ETW000 [     dev trc,00000] set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used        34 0.000172
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000
it looks like ssfs is not used, but parameters are set according to guide. Also database is accessable trough sqlplus, there is no problem to connect and select data.
Do you have any ideas where could be problem?

hi,
I just restarted whole server (on OS level)...
system still cannot start, also r3trans -d shows that connection is not possible, but trans.log looks better, there are positive messages about SSFS, but there is also ORA-28000: the account is locked, so I'm going to fix it now.
rsecssfx list looks ok:
C:\Users\steadm>rsecssfx list
|---------------------------------------------------------------------------------|
| Record Key                     | Status             | Timestamp of last Update |
|---------------------------------------------------------------------------------|
| DB_CONNECT/DEFAULT_DB_PASSWORD | Encrypted          | 2014-06-23 12:22:36 UTC |
| DB_CONNECT/DEFAULT_DB_USER     | Plaintext          | 2014-06-23 11:18:57 UTC |
|---------------------------------------------------------------------------------|
Summary
Active Records    : 2 (Encrypted : 1, Plain : 1, Wrong Key : 0, Error : 0)
Outdated Records : 2 (occupied space can be released by the "compact" command)

Freeze during boot after enabling Hyper-V feature in Windows 8

Good day.
I'm using AMD FX 8320 with 990FXA-GD65. After enabling hyper-v my pc freezing during boot. Google told me that it might be issue with USB 3.0 controller, so i disabled it in bios, but result still the same.
Can you please tell me where should i look at?

Hi,
Please try to boot into WinRE and run the Startup Repair option.
Generally speaking, when you add feature like Hyper-V, system would take a long time to get this feature configured. if your computer still stay updates configuration steps, you can use Windows 8.1 installation image to repair system. In system repair mode,
you can access into Command Prompt mode, and check CBS.log under C:\Windows\logs\CBS.
This log file would record Windows installation process, we may find the problem of Hyper-V installation.
Kate Li
TechNet Community Support

Macbook pro does not boot after enabling Filevault

macbook pro with OS 10.9.2 : after enabling encryption ran in to a problem and did not startup.
did the followings:
- loaded to recovery mode: command-R
- disk utility- verify disk> repair disk
- tried to reinstall OS : did not work
- re-partitioned the hard drive
- tried to install it from bootable Mac os installation : it worked but after running the software update it did not start up again....
- sent the mac to repair store to replace the hard drive with SSD hard : they setup the hard with mac os 10.9.5
- installed all the software update
- enabled the file-vault " this time it finished the encryption but when started up and tried to login with user account it got frozen and did not work and so on ...
- again tried to go to recovery mod and repair the hard and reinstall OS but it did not install the OS
- had to again repartition the hard ...
PS: the macbook loads fine with the OS on External hard disk .
this is really frustrating, can somebody tell me what's wrong with this mac why this issue happens after enabling encryption and why the issue is not gone even after reformatting the partition...

I finally fixed the issue myself
The macbook had a RAM issue: Replaced the RAM and it is fine now.

[Athlon64] Preventing VIA RAID during boot with a K8T Neo?

Is there a way to stop the VIA controller looking for RAID devices on a K8T Neo MS-6702 VER 1.0 board?
The system has a single SATA connected to the VIA controller.
Thanks.

It's looking 4 disks, since u have a disk, and use it, i gues u want it to be found
It's the same thing with IDE devices, only thing is that the message is displayed shorter, giving the impression it works faster.

G4 PM will not boot after using Target Disk mode connected Intel iMac.

Hi,
We have some new Intel iMacs and have transferred some information from our previous G4 PM (one MDD and one Quicksilver) to the new iMacs. For some reason the G4's will now not boot up and kernal panic on the gray Apple boot screen. This has happened to all the G4's we have in our office. They are running OSX 10.2.8 and the iMacs are running OSX 10.4.4. We can still mount the drives from the G4's using FireWire Target Disk mode.
I have tried zapping the PRAM etc but they still wont boot. I have also tried running the OSX 10.2 Installer disks to try and reinstall OSX on the G4's but the installer cannot see the drives?
Anyone have any idea what is wrong. Never had this problem before using the FireWire transfer.
Thanks,
Nick.

I had an experience with a mini mac after booting in target disk mode while connected to a blue and White G3 via Firewire. After attempting a restart, all I got was a blinking ? which usually means the startup disk or system folder can not be found.
I fixed this problem by booting using the originall install CD and then using the startup disk menu to reselect the original system disk/system folder as the startup disk. On reboot. all was good. Only took a couple of minutes.....

Satellite L840/020 - Cannot enter BIOS after enabling fast boot option

I have a Toshiba L840/020 (PSK8LA-020007) notebook. I recently installed an Intel 330 Series SSD and Windows 8 Pro RTM 6.2.9200 MSDNAA on it and enabled Fast boot option in the BIOS (Boot speed > Fast).
Now I can not get into the BIOS no matter what I do. I tried pressing power button while holding down F2 (as suggested by few other forums) , up on failing that I tried all F keys and Esc, but nothing works. I also tried repeatedly pressing F2 while booting, connected an external USB keyboard and pressed F2 on that , but no matter what I do I cannot get into the BIOS.
When I go to Download section of Toshiba support > Windows 8 64bit, I can also see a BIOS update for my notebook, but when I try to install that I get the following error :
Error
Flash process will be terminated!
Current platform have secure boot feature, it must provide NV storage location by IHISI interface.
Please contact OEM BIOS engineer to add the feature.
Without this IHISI interface, the authenticate variables will be modified or cleared by flash process.
If you understand the risk and still want to flash.
You can add the following setting in platform.ini to ignore error.
[EngineeringErrorDisable]
SkipSecureBootProtectionCheck=1
OK
I didnt change platform.ini and flash, without first seeking help from the community.
Please let me know how to get into the BIOS. Thanks.
null

Hi
Try firstly INS button and then F2 button.
Then you should be able to access the BIOS I recommend disabling the fast boot in the BIOS if you could successfully enter the BIOS.
Regarding the BIOS update.
I checked the Toshiba AU driver page and it seems that the BIOS v6.20 is the same like for Win 7.
I think that the BIOS update should be done running the Toshiba preinstalled system since Win 8 is not officially on the market yet and from my knowledge there are some big restrictions updating the BIOS running Win 8

Boot Question - MSI K8T Neo FIS2R

I have the above board and installed it yesterday with a saucy Athlon 64 3200+ and Radeon 9800 Pro card, 60Gb (Pata IDE HDD) and everything is running perfectly in windows XP Pro with great performance in 3dmark tests.
The only question is with the boot up. After the MSI logo I just get a blank screen before the Windows XP logo appears for OS boot up.
I'm used to seeing the Award Bios logo and my Processor with Memtest results etc on the screen before the OS bootup. I've disabled SATA and the Realtek LAN in the bios which were showing up with "Bios not installed" and still there is no Award bios screen.
I'm not the most gifted when it comes to bios configs and would appreciate any help you may have.
All the best
Lux

Awesome, thanks for the help guys.
A simple solution to a simple problem. Many thanks and it's good to join the MSI community.
Cheers

Failed boot after enabling devmon service with systemctl

I've recently reinstalled Arch and in trying to get a proper automount solution working I was playing with udevil and devmon. First I disabled and uninstalled ldm, which wasn't working as I wanted. Then installed udevil via pacman. I couldn't find proper instructions at first so I ran:
# systemctl enable [email protected]
and then rebooted. But that didn't work. Then I found something saying to run:
# systemctl enable [email protected]
So I disabled devmon@ and enabled devmon@MYUSERNAME then rebooted.
As the system was shutting down it seemed to get stuck at a part about trying to save a random seed. I walked away for 10 minutes but when I came back nothing had changed so I hit the hard reset button. As it rebooted I could just barely see a whole lot of red [FAILED] signs flashing past my screen. When the screen comes to rest I am greeted by this. Once it gets to this point it doesn't accept any input from the keyboard except for Ctrl-Alt-Del which seems to cleanly reboot.
So far I've booted my arch install cd and run the following on all my partitions along with trying the -p, -r and -a options.
# fsck /dev/sda2
Nothing I ran seemed to produce any output that would suggest there are any problems or anything like an error code 8, which I've read elsewhere is an operational error, whatever that means.
Next I read up about chroot and gave that a go. I chrooted into my arch install and decided to disable the devmon@MYUSERNAME service and uninstall udevil incase that was interfering somehow. I also checked out the journalctl per the screenshots instructions but didn't really understand it. Also not sure on where that log information is stored so I can upload it here.
Any help would be appreciated.
Last edited by greatant (2013-06-11 11:02:07)

I've not made any progress with this issue. I've decided it has to do with the random seed, but I can't find any information on it via ArchWiki, searching the forum or google.

MSI K8T NEO Lan Problem

I install XP fresh ones all the time to dry different ways of doing it, but doesn't pick up the LAN for it, Lan is enabled in BIOS and everything, it's just wierd, When i put my Motherboard Driver CD, It doesn't bring up the Realtek Network Drivers.... but get this, I've put a network Card,COZmy onboard lan doesn't want to work, and when i put the cd in, it will pick it up, and show the the drivers to install. BUT I WANT TO USE THE ONBOARD LAN.
I have a VIA K8T800 NOrth Bridge & VT8237 South Birdge Chipsets.
what can be done? the Network is, Realtek 8110c/8110s Dual Layout
Integrated Fast Ethernet MAC and PHY in one chip. I know you'll probably tell me to use the card, but i don't want to :'(
I've tried installing many different drivers. still doesn't work, Need Serious Help.
Regards

What does the device manager say.
What do you mean by not working. Is it installed, is there a conflict, can u ping urself (127.0.0.1).
While ur at it: check the version of the drivers.
Allthough they all should be OK.
You can find the proper drivers here btw:
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=496&kind=1

Cannot fully boot after power outage, help please

After a power failure I have tried to reboot.
It takes a long time, but eventually I get to the blue screen with the progress bar.
After another long time, the screen goes black and I get the message in white text:
Darwin/BSD (richards-power-mac-g5.local)(console)
login.diskOs3:I/D error
What should I do from here?
I am in Bali, Indonesia and don't have the luxury of help at a friendly Mac service center.

HI Richard,
Go here for information on resetting power management:
http://docs.info.apple.com/article.html?artnum=300341
Also, try resetting PRAM and NVRAM:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Hope something helped!!
Carolyn

Slow Booting Time On K8t Neo Fis2r

could someone help me with this please, at the third screen with:
no device
no device
it hangs for 5 minutes before it continues to boot.
what could be the problem?

sounds to me like the Via SATA controller looking for drives but finding none.....do you have your drives connected to the Promise controller???? if so you will be able to disable the Via SATA controller in the bios settings which should eliminate this problem :P

K8T Neo-FIS2R - P20378 Sata Controller option missing in BIOS. Cannot disable

A few hairs left....& those are disappearing quickly.......!!!!
I currently have Windows XP PRo running under a Promise SATA Drive. (NO RAID REQUIRED)
In order to allow for a fallback situation (which I am still using swapping between WIN XP & Vista), I found a 20GB IDE Disk attached it to the standard IDE controller & did a clean install of VISTA ULTIMATE on the 20GB Drive...So Far so good.
Next I booted up changed the boot sequence to pickup the 20GB IDE drive first ...Vista Came up....Still so far so good.
Then I found my mouse ...& both USB printers were not recognised.....2 days later I have them all going okay....one problem at a time....
The only issue left ... I cannot see the SATA Drive attached to the promise controller.....I have tried following a few of suggested methods to load the promise drivers that are around......still no luck. Most of the posts I see are around installing VISTA on a SATA drive...my case is just seeing a SATA drive this not the O/S disk.
Moving on ...no luck with the Promise Drives ...so I have tried changing to the VIA Controller by unplugging the SATA cord from the Promise controller & plugging into the VIA Controller ... I boot up & still no luck...The BIOS picks up the VIA change as I see a option to use <TAB> to setup RAID during bootup.. I do not want RAID only a single SATA Drive. One of the things I read was to turn off Promise via the BIOS settings . The manual indicates I need to access this by going to the "Onboard PCI Controller option", here I should be able to turn off the P20378 S.ata Controller...
my problem is ...I can see only the Lan Controller as a option to disable/ enable the other options including the P20378 S.ata Controller.. are not visible.. hence I am unable to disable the Promise SATA Controller within the BIOS..... HELP pretty please..... I can happily run VISTA but I do not have 150GB visible to me & my current disk space is tight.....I need that 150GB ...........
signed...frustated NOOB
PS I have the most recent drivers/ bios etc according the MSI's Online S/W synch tool (which I run in XP Pro as the vista version fails.... DOH)
MB --> K8T NEO FISR2
Memory 1GB
Appreciate your help ..... TA

I agree with Hans, as far as we know there are no drivers for Vista to use the Promise controller, yet.
Same old, same old, Vista and no drivers.
You just have to wait and hope there wil be Vista drivers for the Promise controller.

Cannot re-boot after enabling K8T Neo LAN Connection

Similar Messages

Maybe you are looking for