Cannot re-group or rename one panel

Got one panel named Tag with Attributes, Behaviours and
Relvant CSS (DW
MX2004). All options for this panel are unavailable (grayed
out). I can't
group Behaviours with any other panel, ditto for Relevant
CSS, or even
rename the panel. It's been like that from the start. I
recently had DW
re-create all preferences and settings for another reason and
that didn't
help this problem. All other panels are fine. This problem
doesn't seem to
exist on other computers. Is there a workaround for this? I
really want to
move the Behaviours to another panel and close that 'Tag'
panel.
Any suggestions?
Marianne

Went to Add/Remove programs, tried to uninstall quicktime, did not work. Got the 'Windows Installer' box stating "The feature you are trying to use is on a network resource that is not available" "Click OK to try again, or enter an alternate path to a folder containing the installation package 'QuickTime.msi' in the box below"
Drop down on the bottom of the box gives 2 options
C:\DOCUME~1\SCOTTA~1\LOCALS~1\Temp\IXP071.TMP\
C:\Documents and Settings\All Users\Application Data\Apple Computer\Installer Cache\iTunes 7.0.2.16\
If I click first option, I get 'Windows Installer" box stating: "The path C:\DOCUME~1\SCOTTA~1\LOCALS~1\Temp\IXP071.TMP\QuickTime.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'QuickTime.msi' in a folder from which you can install the product QuickTime"
If I click the second option, I get 'Windows Installer' box stating: "The path C:\Documents and Settings\All Users\Application Data\Apple Computer\Installer Cache\iTunes 7.0.2.16\QuickTime.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'QuickTime.msi' in a folder from which you can install the product QuickTime"
Any other options? Thanks in advance for your assistance.
dell inspiron 2500 Windows XP

Similar Messages

Why 1: Type selected in yellow and 2: only one panel stays open?

In Design CS4. G5 Mac. Final Tiger.
1. I was setting some type to be force justified L/R. Several lines of centered type. Most of it, not all of it, became selected in solid yellow. I did not do the selecting. I could not find the answer in either of two ID reference books.
I checked the Prefs several times, and the only thing I found that MIGHT relate to this is "Keeps." (Preferences > Composition > Keeps Violations/H&J Violations.) Though it says nothing about color choice nor about what it signifies. I know what pink signifies, but not what yellow does.
2. Asked about this next problem before and was told about Workspaces and was told about grouping panels, neither answering the question as I recall. So let me try again.
I have panel A open. It may be alone as Panel A or in a group with Panel B and maybe even with Panel C. Doesn't matter. But now I want to open Panel D. As soon as I click on Panel D, Panel A (alone or grouped) disappears. So my question is: Can I/how can I keep more than one panel open at the same time, grouped or single being 100% irrelevant? How can I keep Panel A and Panel D open at the same time as separate, not grouped, panels?
I tried to ask clearly. My experience is it is most efficient (in Adobe Forums and in real life) to be clear about what you do want and equally clear about what you do not. —Thank you.

1. Yellow highlight is, I believe, substituted glyphs. Is the affected type all caps or samll caps, perchance, or non-default figures? You usually see this with ligatures, but small caps is pretty common, too.
2. Do you have auto-collapse panels selected inthe prefs? This one would help to see a screen shot, I think. If the panels are docked, you must expand the dock to panel width or only one group (and a group can be one panel) will expand from the icon state at a time.

How do I rename one wrongly identified photo in Faces? I seem to only be able to merge two stacks of photos to the correct name, but that is not accurate. I only have one photo in a batch under a certain name, that is wrongly identified.

How do I rename one wrongly identified photo in Faces? I seem to only be able to merge two stacks of photos to the correct name, but that is not accurate. I only have one photo in a batch under a certain name, that is wrongly identified.

In iPhoto '11: Select the photo in the "Faces" stack, open the "Info" panel, click on the face name in the "faces" brick and then on the name below the face to edit the name.
Regards
Léonie

Cannot move the pages from one document to another

Hi,
I cannot move the pages from one document to another, abobe gets crashed. I am not sure but I think this was happening when I try to copy or move the threaded content. How to resolve this, this is happening in both CS4 and CS5. Can anyone help me?

Thanks for ur reply.
1. Open two documents, for ex doc1 and doc2, doc1 contais 4 pages, doc2 contains 2 pages
2. Using Move Pages from the Pages panel menu in doc1, moving 1st two pages to doc2
Move Pages : 1-2
Destination : After page 1
Move to : doc2
Actually I was not able to copy the textframe which is linked with another, immediately it crashes.

HT204065 Group text with one non iPhone not working on iPhone 6 in the group.

Group text with one non iPhone not working on one iPhone 6 in group. SMS, MMS and iMessage as well as group messaging are all turned on. Has worked intermittently but now cannot see or respond in that particular chain. Can send independently to the non iPhone (Samsung) but not in group. Other iPhone 6 and 5 in group work fine.

The reason why you have to turn off 3Gs is because T-Mobile does not support iPhones 1700 something or other. You have to turn off the 3Gs on the iPhone to make it work.
As already provided, it shouldn't matter since the iPhone is designed to automatically connect to the fastest internet connection available. If wi-fi access and 3G network access is on, when in range of an available wi-fi network you have access to and have connected your iPhone with previously, the iPhone will connect to the wi-fi network automatically. When leaving the range of the wi-fi network, the iPhone will connect to the 3G network if 3G network access is available. If 3G network access is not available, the iPhone will connect to EDGE or GPRS - whichever is available at the time.
If this is unique to T-Mobile's network with the iPhone for some reason since T-Mobile is not an official carrier for the iPhone in the U.S. and you were instructed by T-Mobile to do so, then you need to do so.
If this is not working now, the problem lies with T-Mobile and I have no idea what to tell them for them to recognize where the problem lies on their end.

FRM-41072 - Cannot create Group GRP_NAME

In the layout I'm trying to populate Grp_name column values from GRP_TAB table, in the 'GRP_NAME' item list.
This is the code I had written. But when I run the Form, I'm getting 'FRM-41072 - Cannot create Group GRP_NAME'error. What could be the error?
DECLARE
rg_tags varchar2(20) := 'GRP_NAME';
rg_id RecordGroup;
errcode number;
list_id ITEM;
BEGIN
rg_id := create_group_from_query ('GRP_NAME', 'select GRP_NAME, grp_name from grp_tab');
list_id := find_item('GRP_NAME');
errcode := populate_group(rg_id);
populate_list (list_id, rg_id);
END;
P.S. I'm writing this code in WHEN-MOUSE-CLICK Trigger in GRP_NAME list item. Is this the right place to write the code?
Thanks.

> select GRP_NAME, grp_name from grp_tab
Looking up the on-line help for FRM-41072:
FRM-41072: Cannot create Group %s
Cause: Caused by one of the following
1. Duplicate column names in SQL statement.
2. Invalid record group name.
3. Query is invalid.
Action: Check the group name and/or correct the SQL statement.
Looks like you violated rule number 1.

I have an iphone5 and cannot send group texts.

Hoping for advice please. I have an iphone5 and cannot send group texts, it will only deliver if I send the text individually.
I cannot send photos via text message and if someone sends me a photo or long text it comes through to my e mail. Why?
Please help, I think they may all be connected.Thank you.

I've noticed that this only happens when one or more of the recipients I enter has an iphone and at least one of the others does not. The system seems to fail when it tries to send an SMS text message and an iMessage. The frustrating thing is that I don't get a chance to try to just send all as SMS texts instead.
The only way I found to get around this problem is to make sure that I send to two separate groups, one group with iPhones and another without. Two separate messages isn't ideal, and searching for who has an iphone and who doesn't is a pain, but... until they fix it, I'm afraid this is our only option.

I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album?

I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location. They are pictures taken at different times and have the same number I guess.

In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
LN

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs.

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?
In the previous versions of Firefox when you went to you Bookmarks menu it gave you the options to either Bookmark This Page 'command' + 'D', Subscribe to this Page, Bookmark All Tabs 'up-arrow-key' + 'command' + 'D', and Organize Bookmarks 'up-arrow-key' + 'command' + 'B' however in the newest version of Firefox there is no Bookmark All Tabs so you can bookmark all the tabs that you have up in one window at a time. So I need to know if it is possible that the feature is now in a different place, is gone altogether, or if you can get that feature another way?
For me personally and my work I go through hundreds of web pages a day and save around half of those so it is imperative that I be able to bookmark more then one tab at a time because I can't be bothered to bookmark every single page separately and then go through hundreds of tabs in my Unsorted bookmarks in order to sort those bookmarks. It is simple inconvenient to sort every bookmark individually that is why the previous version of Firefox with the Bookmark All Tabs button was superior in its convenience.

Right click any tab and choose "Bookmark All Tabs".

Imported CD songs are each put into a separate album. How can I group them in one album?

Imported CD songs are each put into a separate album. How can I group them in one album?

Look at Steve MacGuire's helpful article: http://samsoft.org.uk/iTunes/grouping.asp

I have two apple accounts that I cannot get to merge as one.

I have two apple accounts that I cannot get to merge. One is a hotmail address and the other a gmail address as primary addresses in the two accounts. I would like to merge them into one account. I cannot verify the addresses of either accounts because when I do it will say that the address already exists. Therefore I can't get them to merge.
Also...
Me.com and hotmail are under the same account., but when I log into me.com some of the accounts turn into the hotmail account. I do not use hotmail anymore and use gmail regularly.
Any insight to these problems would be appreciated.

If these are both used as Apple IDs, then they cannot be merged. If they are just two email accounts of which you only wish to use one, then you would need to transfer the data you want to save from one to the other. Since the data are just email you would need to look for a way to export it from one email address as a file compatible with what the other can import.

How can I use the button in one panel to control the other panel's appearing and disappearing?

How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.

> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle

My husband and I both have iPads and somehow when they were setup the both we're setup using the same email I'd address. When I go to delete and rename one iPad it says all info and pictures will be erased from my iPad. Is there a way to keep the info iPa

My husband and I both have iPads and somehow when they were setup the both we're setup using the same email I'd address. When I go to delete and rename one iPad it says all info and pictures will be erased from my iPad. Is there a way to keep the info IPad when doing this?

You can go to Settings/iCloud and delete the account, then create a new iCloud account. You can still use the same account for the app store though.

Cannot re-group or rename one panel

Similar Messages

Maybe you are looking for