Cannot reach network throught DLink hub with onboard LAN

Hello,
Many users seem to have the same problem but still no answer :O
We tried to change the MAC addr either in BIOS or in XP. We tried to change cable, negotiation setting, we updated the drivers etc...
It works well with a new recent dlink hub DE1016D, but it fails with DE1812.
Please, help !
Bye.
K7N2G-L, Athlon XP2000+, 512Mo DDR-SDRAM Samsung, Win XP SP1, 10MB network, hub DLINK DE1812

I did !
Many users seem to have the same problem with network controler, so maybe it worth to post again ...
h.

Similar Messages

Problem with onboard LAN

Hi,
I have the following problem: After playing around with overclocking and having to reset the CMOS a couple of times, my onboard LAN stops working even if I don't overclock anything. No ping, and the traffic LED is always on. And most interesting, when I shutdown my computer the traffic LED stays on. Is this a BIOS bug or what? Anyone experiencing the same problem?

Well as you know Overclocking Can sometimes Fry something, or Everything on the Board, This is why it is Dangerous....But Before we go there, I assume that you Have Tried Disabling and then Re-Enabling the LAN in the BIOS, And in the "Device-Manager"?......And do you have in the Device Manager (Under-Network Connections) the LAN Listed? And if Click on it, does it say "Device Enabled, and Working Properly"?....If yes, then You are going to have to try to Clear The NVRAM in the BIOS by Enabling this option, and this will Reset the PNP/PCI String, and Hopefully that will be it.....If not, Go into the Device-Manager, and Uninstall the Driver, then Reinstall it......Try that, and let us know, And if you already did all of these things, then You May have Bigger Issues................Sean REILLY875

915G Neo2 won't boot win XP with onboard LAN enabled

Just wondering if anyone can solve my problem. Have got a 915G Neo2 board running with Windows XP. On enabling the onboard LAN in the BIOS it won't boot Windows....the following error is displayed on a windows blue screen
"0x0000007E pci.sys - Address F75DE0BF base at F75D7000"
Anyone got any idea how i can get this to work?
Thanks.

Moan Guide

Internet Connection Sharing with onboard LAN

Hi
Does anyone know if it's possible to setup Internet Connection Sharing using the onboard LAN? I've managed to get shared files and folders working, but can't get internet access on the client PC.
Using the K8MM3-V
Windows XP Pro on both PC's
I have 3 NIC's I can use.
The Host PC is using the onboard LAN to connect to the internet
I'm using a Realtek RTL8139 Family PCI Fast Ethernet NIC in both the host and client PC's
The Host PC also has a NETGEAR FA312 Fast Ethernet Adapter (Currently disabled)
I'm using crossover cable and 2 NIC's method.
I don't have a hub, switch or router.
I've had it working before on Windows 2000 Pro, but can't remember how I did it. (I think it just all worked straight away).
Anyonew knows if this is possible, please let me know.
Thanks
Michael

Have a look here.
http://support.microsoft.com/default.aspx?scid=kb;en-us;306126, Hope this helps. DOK

Prob with onboard LAN!

It doesn't seem to want to work when I run my board in dual-channel mode!
I'm using my old generic 3com card in the meantime...but I might need that PCI slot.
I'm using the 6743, or the GM2LS, which is an mATX board with a p4 2.8c. No OC'ing, stock voltage on the CPU and my 2x 512 Corsair matched memory.
Win XP Pro SP1, 400W Antec SmartPower PSU.
Just updated all my drivers.
Any ideas anyone?
-Dave

You board has an onboard 10/100Mbps LAN right? Disable the onboard LAN so that you PCI Lan card can be use.

Having problems with onboard lan on KM2M (MS-6738)

I have enabled the onboard lan in the bios, i have installed the drivers for the onboard lan. When i plug in my cable modem connection the program that came with the mobo reads that there r lots of BPS coming into the computer but the computer wont send information out. I am running Windows ME for a littel while on it till i can get XP ...is ME my problem or does anyone have ne other suggestions?

thank you for aswering
This is the second pc I built with the exact specification and the first one didn't give me problem at all.
The only thing I did different was select the option of Quick Setup to install the on board lan and audio at the same time and i did not install.
Can this be a Hardware problem?
mean time i will unistall the Audio driver and try to installed by Safe Mode to see what happends.
Athlon 24+
MSI combo km2m ms-6738
256ddr
40gb
win xp pro

Cannot see Networked computers and problems with WEP sign in

I recently installed a new HD (SAMSUNG HM500LI) into my 2.16GHz MacbookPro running 10.5.5 and transferred all my files using Apple's Migration Assistant.
Everything seems to have been working fine until I tried to log in to a friend's wireless network using a WEP password. OSX gives me the error message "Commection Timeout". I can however connect to other unsecured wireless networks on the list.
I have tried deleting the keychain access for the WEP network and reentering the correct password, but no success.
What I have also realised is that I cannot see other macs on my Network in finder any more.
Another point worth mentioning is that the Parallels NAT and Guest in Network preferences (for Parallels virtualisation software) have now automatically been renamed to Ethernet... (en2) and (en3).
I still have my original harddrive in an external casing and booted from that and everything worked perfectly - I can both log onto the WEP wireless internet and see other macs in my vicinity.
Can anyone help me here please? Are there maybe some settings that weren't migrated with the assistant? Could it be that my file sharing settings need altering? Did I maybe not format the new drive correctly (I just erased the new one and formatted it in Mac OS Extended (Journaled))? Has a recent Apple update maybe upset something, and if so, is there a way to uninstall it?
Thank you in advance.
Robert
Message was edited by: Robbie1702
Message was edited by: Robbie1702

Hi Robbie, and a warm welcome to the forums!
Have you done any Maintenance since installing?
If not, at start with this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, move these files to the Desktop.
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
Then delete the orignals & reboot once more.
On the WEP PW, try putting a Dollar Sign in front of it, like...
$xxxxxxxxx
Also, is the WEP PW exactly 5 or 13 ASCII, or 10 or 26 HEX characters?

Anyone with onboard LAN based on the Qualcomm Killer E2205

I am considering a motherboard with an onbaord Qualcomm Killer E2205 chipset. I have only used Intel in the past. Does anyone have this hardware and have you experienced anything negative under Linux? I can't find any info as to whether or not the kernel supports this natively...

There's native support, the alx driver, in the kernel since 3.10 I think, so it'll work out-of-the-box. Don't know anything beyond that, but I don't see any reason why it wouldn't work fine.

Cannot reach cluster ip after configuring network load balancing

I have set up NLB for 2 WFE of SharePoint 2013:
WFE1 : private ip 192.168.1.100 ; public ip 172.1.1.1
WFE2 : private ip 192.168.1.101 ; public ip 172.1.1.2
Cluster ip: 172.1.1.3
I used 2 private ip in NLB and select unicast, but I cannot reach the cluster ip from out of these 2 WFE server.
Any body can help me? Thanks in advance.
Awen

Yes, I follow these steps and created NLB successfully, but cannot ping the cluster ip from outside these hosts server in NLB. Below is detail information:
OS: windows 2008 R2 64 bit
Sharepoint : 2013
WFE1 : private ip 192.168.1.100 ; public ip 172.1.1.1
WFE2 : private ip 192.168.1.101 ; public ip 172.1.1.2
private ip 100/101 can be communicated with each other, but cannot reach from other servers, even with same subnet.
Cluster ip: 172.1.1.3
After created NLB with unicast, I can ping the cluster ip from these WFE servers, but when I enter the cluster ip in browser, nothing display and cannot ping the cluster ip from other servers.
Awen

Hard drive and hub with Time Capsule

I want to add a hard drive to my Time Capsule 2TB. I've read the other posts here, but am still feeling uncertain about how to be successful. I have a printer connected, and want to keep it connected, so I know I need a hub. I have a USB-powered hard drive that I'd like to use, and I have a USB-powered hub that I could use.
I think I understand:
1. I cannot use a USB-powered hub with a USB-powered hard drive.
2. I can use a USB-powered hub with an externally powered (desktop) hard drive.
3. I can use an externally powered USB hub with a USB-powered hard drive, however, not all hubs will work in this configuration.
Do I have this right?
And the next question, is anyone using an externally powered USB hub that they know works with the Time Capsule?

Do I have this right?
Yes.
And the next question, is anyone using an externally powered USB hub that they know works with the Time Capsule?
It is harder than you think to say.. brand x or brand y works.. because the companies that sell them buy from several sources and make the factories in China bid for their work.. one year they use this chip and the next year a different factory and a different chip.. but USB hubs are too cheap to get proper revisions.
So I read a belkin xyz works fine from one poster and another say that bought the same one and it failed.. both are right.. welcome to the bottom end of the market.
Buy the cheapest hub you can from whoever is nearest to you.. and check if they will swap if it does not work. The cheap generics often work fine.
I have been trying to help get a database of what is compatible.
USB drive compatibility with Airport Routers. Help make database.
This is looking particularly at USB disks. powered hubs are just too numerous.
If you want a good place to buy that is likely to stock stuff that works ring OWC (if you live in the US) for their recommended ones.. it will likely be a few dollars more but they would quickly find what is working in the stock and what doesn't.

Where is my Onboard LAN?

I recently purchased a KT4V mobo and it says on the box, and in the manual that it has onboard LAN. It even has a LAN cable socket on it and it even says it the manual there should be an option to turn my LAN on and off.
Guess what!
There is no option in the bios to turn it on or off.
It seems as though the mobo doesnt know it has onboard LAN even though the lights flash when I insert a cable.
I have tried contacting MSI but they are as useful as a condom machine in The Vatican. I have also tried updating EVERYTHING!
Please Please Help!

1) Try another cable
2) Power cycle your broadband modem and any routers/switches/hubs between the modem and the computer.
Does the ethernet controller show up in the Device manager? Have you installed drivers for it? I had 2 systems thawt I couldnt get online, 1 with onboard LAn and 1 with an addon card. I could get all of my other computers online but whenever I plugged in the other they wouldnt work. I called tech support and RMA'd the NIC but the new one wouldnt get online. Someone suggested I reset my modem and 10/100 switch, and when I powered everything back up both systems connected immediatley. Trust me, you dont want to RMA a board with MSI, unless youve got a loaner system for 2 months!!!!

K7N2 Delta2 :: Onboard NIC Once Flawless, Now cannot find Network

Hello, and thank you for reading my Support Query!
Heres the Deal. For the past Couple of Months, I've had little to no problems with my K7N2D2. Everything worked to my expectations.
Until Last Night, was online, and downloading some Bittorrent Files when all my connections suddenly drop'd from Maximum to Nothing.
First Thought : ADSL Dropped or Router Stalled... So, I Restart ze Modem, Restart the Hub. All their Flashes go Normally, and I wait a few moments for everything to Synch Up. Then Tried refreshing google.com .. to No Avail, its -instantly- reporting it cannot find the address, yadda yadda.
2nd Thought : Oh, maybe Verizon's Service was interrupted... But No, I walk into the other room, where my Bro's Comp is at, and the Net is Fully Functional and Online. [ He also has a K7N2-D2 MB.. The Comp which im typing at right now]
Weirdness : I Cannot Connect to the Routers IP Address. I Cannot even Connect to any other the computers on the Network. [ This all Used to Work Perfectly, Small Home Network of 3 Comps, With Lots of Read Only Shared Folders, for Music / Movies ]
Continued Wierdness : Everything in the Device Manager seems to Say everything is in perfect working Order, and I Can Ping Local Address [ 127.0.0.1 ] With No Problem. I Tried Pinging the Router, but it couldnt find Destination?
ipconfig/all Reports that, DHCP is Enabled, AutoConfig is Enabled, but it cant find the Gateway or DHCP Server.
What is going on? Did I Fry the NIC with too Many Torrents?
I Tried Hooking up a Old D-Link NIC Card I've had around for awhile, Not Sure why but it didnt want to Work.. Maybe cuzz its been sitting in storage for years.
Help is greatly appreciated, Is there anyway I Can run a diagnostic on the Onboard NIC? Yarr.

Hi all.
I'm new here, but have to write, coz I have exactly the same problem, like Nookovski.
I'm using my K7N2 D2platinum for more than 1 years, without any problem, using the onboard LAN for internet (connected to ADSL cable modem), and another Ethernet card for internal LAN.
2 days ago, I was playing network game with friends, when suddenly my connection was lost. I tried to reach homepages, but no avail. Try to ping some common addresses, nothing happens, 100% lost.
I rebooted, and saw, that my ip address for netconnection changed to 163... etc. This is weird, coz originally my ISP always give some 80... etc from DHCP.
I tried renew my ip, no success.
Called my ISP, they said, they can see my modem, but can't see my PC. I have to plug the cable to my another ethernet card for a moment - I did it, and they saw my pc in this case. They adviced to reinstall my onboard NIC driver. OK, perhaps later.
After all, I found an old Ethernet card (Realtek family) in my case, so I installed it. After a quick reboot my netconnection was fine through this new card. So no network problem on ISP side, there is something with my onboard LAN.
I tried to uninstall / remove the driver from hardware settings panel, but the window freezes. If I reboot in safe mode, and try to remove again, windows says : cannot remove, device is needed for operation. (or smth like this)
I tried reinstall LAN components from the latest MSI driverset, but nothing changed. I think it cannot overwrite the old (damaged?) files.
Now I'm using 2 PCI eth.card, one to connect with another PC, and one for internet. I disabled the onboard LAN from bios. But this is annoying, I don't understand what happend from one minute to another, and I would like to use my integrated NIC!
I found some posts here, advising to set the MAC address in bios manually, regarding to a sticker on the mobo, but I don't have such an option in BIOS.
What should I do now? Are there any solution?
Thanx!

Cannot reach PBX system using data network

Good day Cisco people,
I am Simon and I have a big situation. My company recently expanded to one of our branches. Now this branch houses 100-150 employees. They are using computers and IP phones.
Currently, Our voice and data are integrated into one network.( With no configuration for voice and data vlan on the 5 Cisco switches that distributes the broadcast). We have a Cisco 1941 router used for DHCP for our local data lan and for VPN connection to our Head Office, It's network id is 192.168.65.0/24. Then for the IP Telephony we have Avaya 500 v2 for the PBX, It's network id is 192.168.42.0/24.
Now here is the problem and the questions.
1. I cannot reach the Avaya PBX from the Cisco Router even though I added a static route from the router. ( Do I need to add the route also from the PBX to the router? I want to add that I don't have any experience in voice networking only in data networking.) And is there a way/or is it possible that I could add a route from PBX to router?
2. If I am going to configure two vlans on the switches for the data and voice vlan? Do i need to configure router on the stick on the router? How about the interface that the PBX is connected to? what should I configure it? Should I configure it as a voice vlan only? a trunk port? access port?
3. Lastly, what could be possibly go wrong if ever I configured this on a production environment? And is it that hard to integrate voice with data?
Thank you for your support. I hope you understand. I don't have experience yet in handling both voice and data. Only data networks.
Note: Attached also is a simple network diagram for reference. Thank you.
Have a nice day,
Simon

Hi Simon,
I assume your phones are using static IP addresses to allow them to talk to the PBX?
If your switches have no VLAN configuration then you will have both layer 3 subnets running over the same layer 2 VLAN.
You could do a quick test and put a 192.168.42.X IP address on the interface of the 1941 that connects to your LAN, but use the ‘secondary’ option. This means the router will have both a 192.168.65.X address and a 192.168.42.X address.
You should then be able to PING the PBX from the router.
You will need to configure either a route or default gateway on the PBX of the 192.168.42.X address you have setup on the router to allow it to route packets between the data and voice networks.
A better practice idea as you suggested would be to setup a new VLAN for your voice network. You would need to create a trunk link from the switch to your routers inside interface then configure a sub-interface on the router for both VLANs.
Hope that helps
Matty

Windows Server R2 stop working. Cannot map network drive with my Win 7 client.

Hi to everyone.
I had a problem for quite some time time and even i tried to solved it till now unfortunately seems unreachable.
I have a 2008 R2 server which is used as SQL 2005 server. My application program shared from the server. My win 7 client use a map network drive to access my share folder from my windows server. Suddenly my clients lost my connection. Since then i
cannot connect to the folder and i got the message
Windows cannot access \\Server\Storage
Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
Details: Error code: 0x80070035 The network path was not found.
I check out my share permissions, all seems ok. I also check out firewall, services, TCP/IP, share folders, really almost everything but still nothing.
Does anyone have any idea how to resolve the problem.

Yes what seems to happened is due to virus infections.
This problem started 2 weeks a go. First i had network connection error with my client. Them my application had respond errors. Finally i lost my network drive.
I realize that the problem was due to virus. My old antivirus program doesn't s scan any threats so i uninstalled it, and i installed Panta antivirus and i clean up my server and my clients from virus. I am sure that both are clean from virus. My antivirus
program runs every day with no traces of infections.
Since then i cannot see my share folders on my server side and i cannot map network drive.
One thing that i want to avoid is re-installation of windows server 2008 R2.
Can anyone help about this
Thanks

I installed the new google maps app and I am unable to make it work because it says, cannot reach server. I have a iphone 4 with 6.0.1 up to date. Please advise where I can locate to chech if my location is turned on.

I installed the new google maps app and I am unable to make it work because it says, cannot reach server. I have a iphone 4 with 6.0.1 up to date. Please advise where I can locate to check if my location is turned on.

i found a solution for this issue when google maps shows you an empty map error message cannot reach server. Click on the icon next to search and you are supposed to be presented with your profile, if not u will have an empty space. click on that space, then the "gear " Icon and logout.
restart your iphone then strat google maps again and log back in.
apparently this is happening when you change your google acount password or enble or disable 2 step verification.

Cannot reach network throught DLink hub with onboard LAN

Similar Messages

Maybe you are looking for