Cannot reactivate network magic after a system restore

I am trying to re activate network magic on one of my four computers and it is telling me that I have reached my limit. The thing is its the same computer that had it on as of Sunday. I had to do a system restore on it and now I cannot
reactivate using the same product key. Please help resolve this issue for me.
Thanks
Susan Moody

You can try to email the support team at [email protected] or call them at 888-812-9402
Mon-Fri, 9 AM-5 PM Pacific Time and Sat-Sun, 11 AM-4 PM Pacific Time as what the website state. I've tried to ask support and got my Network Magic software working again.

Similar Messages

Cannot run firefox 5 after running system restore

ran system restore after installing version 5, and now cannot run firefox or uninstall it.

Windows' System Restore usually doesn't break Firefox, but it usually doesn't fix it either.
I recommend backing up your Firefox settings in case something goes wrong during the next few steps. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, try reinstalling Firefox 5 over the existing installation. http://www.mozilla.com/firefox
Does it work?

Uploading previous iWeb work after a system restore?

How do I upload previous iWeb work after a system restore?
I backed up my data on a Hard-drive then I did a factory reset or restore of my hard-drive....
Now I am attempting to open my previous iWeb work online and it is not working please help.....

Your domain.sites2 file is the file that iWeb stores all its data and it is this file that you need if you want to continue updating your website in iWeb.
It is found under your User/Library/Application Support/iWeb folder and then the domain.sites file.
Your user library is the one with the house and this is where your personal user information is stored as opposed to your System Library which is general and where iWeb is not.
If you don't have your domain.sites file then you will have to re-build your site from scratch as iWeb does not have the ability to read or open html files - so a previously published site - it is a one way street creating html files upon publishing.

A few days ago(after a system restore) the firefox 15.0.1 crashes every time i opened(in a few secondes or in 1-2 minutes)

a few days (after a system restore )the firefox 15.0.1 chrashing and freezing every time i open it.in a safe mode i dont have any problem ,but i cant find if blame any addon or anything else.im unistalling and reinstall the update or older version(14 ,15.0)but the problem remain.what can i do?i have win 7 ultimate

If the problems arose after a restore from a Windows restore point you may need to resort to reinstalling Firefox, as sometimes Windows restores have been known to break Firefox.
Security software including Firewalls is another problem that can slow Firefox or cause it not to work. You need to ensure the security software recognises the current version of Firefox (Again I wonder if a Windows restore may have affected this also.)
* [[Configure Windows Firewall to allow Firefox access to the Internet]]
*also see [[Firefox hangs or is not responding - How to fix]]
If you are getting crashes are you able to provide the Crash IDs for a couple of recent crashes.
* see [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] <br/> they can be found by navigating to about:crashes
Also see
* [[Firefox does not work - Common fixes to get you back up and running]]
*[[Configure Windows Firewall to allow Firefox access to the Internet]]
Apparently you say there is no problem in Safe Mode, if so try Firefox with Hardware Acceleration off, if that helps then instead of leaving it off look at your graphics drivers.
* see [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems#w_turn-off-hardware-acceleration]]_turn-off-hardware-acceleration
* maybe your graphics driver rolled back on the restore, and needs reinstalling see [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

Cannot uninstall Network Magic Pro Free Trial

My free trial is over and I cannot uninstall Network Magic Pro.
It is not in the list of the Add/Remove Programs.
I'm running XP Pro.

PSYCHSON wrote:
My free trial is over and I cannot uninstall Network Magic Pro.
It is not in the list of the Add/Remove Programs.
I'm running XP Pro.
Hi PSYCHSON,
Rerun the Installation program for Network Magic. It should give you options for Repair or Remove.
If it does not, then simply reinstall overtop the existing installation. Reboot and go back to Add or Remove Programs and remove it.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Error code 0xe0ef0003, No "BOOTMGR" after a system restore, no disc/self system.

So ... my HP Pavilion dv7 NB, that I've owned just a mere two days shy of three years, decided to get extremely lazy late last night. I have malware programs in place, strong security, etc. but I suppose that something might have slipped in ... but unlikely because of the issue I'm having. Which is the same issue that, well, everyone else is having! I do use my PC a lot so no big deal. Since I did everything that is suggested to do prior to an extreme act like a system restore I figured that I had no choice but to do a restore and that all will be well. Saved what images, music and a couple of other things that are important to me onto a disc and started to wipe things clean. I've done this before on my desktop ... which I've had since 2004 (Sony VAIO VGCRB42G) and is still going strong even though it's considered a "relic" at this point. I do take very good care of my things ... So after saving what I wanted I began what I thought was going to be a fairly short process. That started last night. 24 hours and hundreds of posts later I am no closer to figuring out what is going on. Maybe the OS? Microsoft and W7 really isn't ALL that ... it's good but not great by any means. Or could it be the components? Built by HP ... or FOR HP over seas, maybe? Regardless, my experience with HP products lately has been less than stellar. And after reading reams of the same issues that others and I share, with no cure for the elusive 0xe0ef0003/No BOOTMGR bug, it seems that my actions of a mere 6 months ago were spot on .... stop buying HP products.
There was a time when HP was king. They had great products, built right in my own backyard. Heck, my mom used to work for Fairchild. Who probably made some of the components that HP used in their products ... I think ... right here in the good ol' U.S. of A. I used to deliver skids and skids of freight to HP way back when. Now their campuses look like ghost towns. Yet there was a recent major ad campaign and their brand is still taking up shelf space at Fry's on Durham Rd. ... uhh, 'scuse me, Automall ...
I've read a number of "Solved!" messages to which none helped me. But I do appreciate this community for trying ... sorta. Too many of these 'Solved!" messages included the suggestion of purchasing a restore disc, HD or something else. A recovery/restore disc ... something that was always included for free when one bought a new PC. Something that I got with my VAIO. Something that I've only needed to use once with my old a$$ VAIO! I am amazed that my ancient relic of a desktop outlasted my NB by 6+years ... and still going.
So after searching high and low and employing every other suggestion that I haven't tried already, all one of them, that doesn't require me spending more money I've resigned myself to accepting that if I want to be "mobile" with my PCing ... I'll have to buy another. Brand. Don't get me wrong, I love to spend money and I would gladly spend the extra dough if my NB was a little older but since it's so young and already needs a "heart transplant" I'd say the outlook for the rest of it's existence is pretty short and dismal anyway. So I'll just be "putting her down" ...
I'd like to thank you for allowing me the space to rant a little. Please be kind in your responses. I'm not really looking for help to fix my NB. I consider her dead. There are plenty of posts with folks who have the exact same issue. A ton. Mega tons! Chock full of replies and answers on this issue already. Do a search for yourself if you don't believe me! No, I just thought that maybe a muckety muck might be listening. I doubt it but ya never know!
As I am typing this up on my desktop I can't help but notice that I still have two pieces of HP product that I'm still employing: The wireless keyboard and mouse that I'm using at this moment. I sure do hope they don't burn up under my hands before I hit "Post"!

you can't reactivate ps cs.
however, adobe allows you to use ps cs2, http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Kernel panic after full system restore

Yesterday I noticed that my computer was quite slow. Seeing as how the hd has never been formatted since I have bought the computer in 2006 I thought the drive was badly fragmented. Since there are no free defrag solutions available for mac, I thought I would just format the drive and do a system restore using time machine. I did a full format with 1 pass of zeros then did a system restore. After the restore when the computer rebooted, I got a kernel panic. The kernel panic mentioned something along the lines of "Version mis-match between Kernel and CPU". I then chose to restore to an earlier backup but that yielded the same results.
I have done a lot of googling and most of the solutions to this problem indicate that the restore is being initiated from a Leopard install disc rather than a Snow Leopard install disc. I am using a snow leopard disc.
In the end, I did get my system working by installing snow leopard over top of itself then applying the latest combo update. The reason for this post is so I can hopefully find out why I got the kernel panic. This incident had cost me a lot of time and if I cannot rely on time machine as a backup solution then there is really no point in using it.
Thanks.

eradicator006 wrote:
Yesterday I noticed that my computer was quite slow. Seeing as how the hd has never been formatted since I have bought the computer in 2006 I thought the drive was badly fragmented.
Doubtful. See: [About disk optimization with Mac OS X|http://support.apple.com/kb/HT1375].
In the end, I did get my system working by installing snow leopard over top of itself then applying the latest combo update. The reason for this post is so I can hopefully find out why I got the kernel panic. This incident had cost me a lot of time and if I cannot rely on time machine as a backup solution then there is really no point in using it.
Something in your installation of OSX was probably corrupted, damaged, or missing, and Time Machine backed up the corruption (as would any backup utility). So when you restored, you brought the problem back.
That's likely also the reason your Mac was running "quite slow."

T43 - Lost USB and wireless after full system restore

Hi,
I've been struggling to get my work system back online for two days now. It's a T43 which had become unbearably slow so after 3 years I decided to blow it away and use the system restore to set it back to factory. However as seems to be the case all around, factory in this case means...nothing works and you have to manually install all of the drivers.
I upgraded my bios to 1.29 and embedded controller to 1.06
I installed drivers for every device and after a full day of futzing finally rid my device manager of unknown devices (mostly) Here is a shot of it...
Device Manager
However the most troublesome things have been wireless and USB. Given that I had no idea which wireless device was in my system I tried updating the driver through device manager and pointed it at each of the three available wireless adapters on the Lenovo T43 drivers page. The first two I tried were rejected, but the third one took and the device finally started. However, when I point it at my wireless network it just keeps switching back and forth between "Not Connected" state and "Aquiring address state". I finally disabled it. This device worked fine as did my wireless hub prior to the system restore.
Worst of all however is my USB. After first doing the restore, all of the USB host controllers were unknown. I could find no specific driver for them on the Lenovo site so I just right clicked on each of them and selected "update driver" and let it find whatever it could for them. Low and behold they all popped right up one at a time and were identified along with the root hub. At that point two new unidentified "other devices" were enumerated, one being my printer and the other my USB Western Dig backup drive. The hard drive's power turned on indicating a signal from USB, however it never popped into the list of available drives in My Computer. I was able to install the Samsung printer drivers from CD which took the printer out of the list of "other devices", installed USB printing support, and set up the printer in the "my printers" directory. However I can't print to it. Print jobs just sit in the queue and the printer acts like nothing is happening.
It's terribly frustrating because all of my backed up work and environment settings is stored on my USB drive. If I can't get USB working again, I'm in serious trouble. Thus far, I've tried disconnecting the devices and reconnecting (it makes a system ding but nothing else happens). I've tried uninstalling all USB devices from the manager and then doing a scan to reinstall them again. Both times I've tried this, the devices once again come up as "other devices" and I have to repeat the earlier steps to get them property identified.
I can't find any excuse at this point these devices not to be working. Can anyone please offer any further suggestions? If I was unclear about anything I'll be happy to clarify the problem. I'm despertate to get this thing working again fast.
Thank You !!
Solved!
Go to Solution.

OK, let's try the older one:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62875
You may want to delete the entire Win subfolder before installing it, though.
Now, honestly, I don't quite understand why recovery disks would skip this driver. I've restored hundreds of T43/p machines and have never encountered such an issue.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Cannot run Disk Manager in Full System Restore

Hi,
I'm trying to do a full client restore of Windows 8.1 with my Windows Server 2012 R2 Essentials (all Windows Updates installed on server), but on the screen where I select source and destination volume, and I click on "Run Disk Manager", I get
error "Cannot load Microsoft Management Console". Same error occurs whether I start the Full System Restore via network over Client Restore Service, or via USB stick.
I can think of a workaround to this, but I've used this earlier in previous Essentials/WHS versions and it has worked flawlessly, so I'm wondering if this is some regression in 2012 R2?
UPDATE: For anyone wondering, the workaround for this was to boot with normal Windows ISO, go to Advanced settings -> Command prompt, and set up the volume using
diskpart tool. Then going back to Full System Restore, and you can just select the correctly initialized target volume.
Any comments?

Hi,
Few days ago system got in a weird state and had to do a full restore. Enabled network boot from BIOS, connected to Windows Server, chose disks (only restore BIG_SSD, i.e., C:) just normally without need to go to Disk Manager, as backup matched current drive.
Perhaps the original issue was due to boot partition being on the secondary drive for some reason (drive D:), but I'm not sure if it was indeed the case.
I have seen it before as well, that restores in Essentials don't work properly if you've chosen only to backup drive C:, but for some reason drive D: is the booting disk (although Windows is on C:). Why has it ended up like that, I don't know, but nowadays
I always install Windows with just one hard drive connected especially if I want to get reliable backups to Essentials.
Thank you everyone for feedback, will mark it as solved, although we perhaps got more questions than answers :)

After a system restore, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." the E

I did a system restore, trying to get rid of the new update (which I HATE), and now when I try to open iTunes, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." You can't change the language option unless you can open iTunes - and IT WON'T OPEN!!! What a piece of crap! If there existed an iTunes substitute, I would purchase it in a hot minute!

Strip it out and start again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you really want to roll back to 11.4 uninstall all iTunes/Apple components as described in the second box, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2

How do I get application manager to install products after a system restore removed them?

I had some issues starting the computer and had to use system restore to get it runnng.
But that meant that all the applications I installed using creative cloud were gone.
When I started the Application Manger, It read that all the applications that I had installed were still installed.
I don't know how to reset anything to reinstall what I lost. As you can see I says the installed programs are up to date. But they are not on the hard drive.
If anyone can help, thank you very much. Or I wait till they open tomorrow. Barry

Hi Mylenium
i did a Forum search upon AAM issues and came here.
My system and all installed CS6 Applications are running smoothly, just AAM shows some odd behaviour
Most needed applications are installed, but under the "All" Tab, AAM shows "install" on the right, see my screenshot below.
Contrary to that what is seen on the screenshot up there from user "Bar".
under "Updates" it shows all up to date (see screenshot below)
This way, I'm cannot be sure if AAM works correctly or not.
So i have followed your suggested advice and cleaned everythig up, downloaded and installed everything again, ugh!, but problem still persitis.
Usually it should show up which Applications are alredy installed, respectively are up to date and which application are still not installed.
Is there a known issue with AAM?
Thank you.

1.Backup to External drive 2. CoverArt lost after Windows system restore

I recently spent many hours searching for and applying cover art for my music which was mostly ripped before cover art was readily available.
Because of this investment, I want to be sure my library is fully backed up. I want to use space on an external drive, rather than DVD's.
I noticed as I added art, iTunes started acting sluggish. I thought it might be because of the new version or a recent Windows Vista update. So I decided to run system restore. I was appalled to discover that restore wiped out the art I had added. So I reversed the restore and the cover art returned. It became clear to me that the art must be stored in some other way than in the actual music file. I've searched the forum and found others who had problems with system restore, but no explanation of exactly what I should do if I want to proceed with a system restore. I use system restore several times a year and I have never lost anything in iTunes before I started adding cover art. I also never had a problem with sluggishness til I added a bunch of cover art.
My library is large at 3000 items.
Is there a way to compact or optimize the database to improve responsiveness?
Is there a way to backup to an external drive? Is it just a file copy and export library file?
If I export the library as an xml file before I do a system restore, can I then replace it after the restore and protect my cover art.

To be completely sure what you're doing please take a look at your iTunes Folder and see what Vista stores inside it. To find it, go to Start>Computer>Hard Disk C>Users>Your Name>Music>iTunes>.......
Please note there is an artwork folder PLUS a music folder!
My guess is that your system restore point pre-dated the time you added artwork to your iTunes files. (Celebrate that system restore still works for you--I have not been able to successfully restore for over a year now--Norton Internet Security causes system restore failures for many Windows users! I've tried to do this using Windows XP and Vista--and I can never successfully restore anymore.)
To fully backup your library, just copy the entire iTunes folder to another source--second hard drive, USB drive, or burn it to a CD or DVD, etc.
If you're experiencing "sluggishness" it may be due to the amount of RAM on your system. iTunes needs a great deal of RAM to run smoothly. You can choose to: increase the RAM on your system, OR, turn off cover flow/album view and see if things run more smoothly.

Lost purchased iTunes after computer system restore

How can I retreive purchsed iTunes that I lost after I had my computer system restored? I re-loaded the iPod + iTunes disc and non of my songs seem available to me.

That is going to depend on what you mean by "restore". If you formatted your hard drive and did not have a backup then the music files are gone and you will have to re purchase them all. Same thing if you
If you still have your music files all you need to do is add them to iTunes. Go to File > Add Folder to Lib... and point to where the files are.
If you believe you still have the music files but do not know where they are try doing a search for *.m4p, or *.mpb, or *.mp3. If the files are still on your hard drive then that should find them.

After a system restore, my search bar can't be used

My computer had a system restore after a storm shut my computer off after being frozen. No other issues are going on other than when I try to use the search bar, nothing happens. If I use the drop down box in the search bar, the only options I get are Add "Firefox Help", and Manage search engines. If I click on manage search engines, usually I get a list of options, google, yahoo, etc, but it is completely empty and restore defaults is grayed out.
Per other suggestions on this forum, I have upgraded to the latest firefox version, I have also downloaded the serachreset addon which didn't help. Also, there was another post on deleting the formhistory.sqlite file under my profiles, however, when I went to try this, there was no such file for me. (from this website's instructions http://kb.mozillazine.org/Unable_to_search_or_add_new_engines)
Please help as I don't want to have to delete the entire program just to find that upon reinstall, I don't have a fix.

You are sure that they are in browser\searchplugins and not in \searchplugins in the Firefox program folder?
There has been a change and in current Firefox versions some files and folders have been moved to the browser folder and searchplugins is one of them.
*http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
*http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/

After a System restore event I am unable to 'unpack' the Abobe Creative Cloud App to load it.

I purchase a subscription to the cloud (Lightroom / Photoshop). The APP all downloaded fine after the purchase and the short cut worked, I managed to download the 2 software packages and started to use them. I then had to action a Win 7 Systems restore. Following this the software was no longer on the Laptop. I therefore tried to re-download the APP. This initially seemed to work OK but when running it, the APP appears to start the loading process, then just disappears after a few seconds. I have waited for hours to see if it would finally burst into life. Can anyone suggest what I need to do to restore functionality and what the issue is? Many thanks in anticipation.

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Cannot reactivate network magic after a system restore

Similar Messages

Maybe you are looking for