Cannot read form GLXSTBKS.fmx
Hello,
I have a R12 (Linux) Vision install on my machine. I am trying to view the Set of Books definition but the application says "Cannot Read Form GLXSTBKS.fmx".
I looked in GL_TOP and I could not locate the fmx file, I also looked into AU_TOP and could not locate the fmb either.
I tried using ADADMIN to recreate the files but that did not work. Any suggestions on how to obtain the fmb and recreate the fmx.
Thanks,
Sarvesh
you can either try to get it from another R12 instance you have or try to download any path for R12 that has the file in it and just take the file and ftp it your server and regeret it.
fadi hasweh
http://oracle-magic.blogspot.com/
Oracle is not Magic, it just takes years of experience
Similar Messages
-
Cannot read form hsu0000f.fmx
I get this message when I try to run the Headstart Administration.
When I check my hsu/forms directory I notice that only fmb are in there.Sorry, forgot to say that this is a 9iAS installation running Designer9i/Forms9i/Headstart9i.
-
Sorry for the newbie issue - I just haven't been able to figure this out...
I inherited maintenance of a old Oracle Forms Application, I was told it was version 5. And all the source modules were appended with "v05" like form1_v05.fmb, etc. I since discovered that when the users launch it they run against the forms 6i run time - so I guess this means it is actually a forms version 6i application.
The App has about 20 forms, 20 reports and a menu - and no project.
I copied all the source files into a working directory, then I created a project with the project builder using the "use all files in the current directory".
When I run the app ( by drilling down to this app's "logo" form - a splash screen contain our company logo, and a Menu structure it runs fine.
But just about every menu item I attempt to select ( i.e. MENU->Catagory1->OrderForm or in my case something like MENU->Inbound->Entry/Maintenance) results in no new form launching and the status bar contains the error message like "FRM-40010: Cannot read form order_v05.fmx"
In the above example the project does contain a order_v05.fmb, and it compiles fine ( in fact a project "build all" generates no errors or warnings ) - my single working directory contain all the source modules ( like fmb's, rdf's and mmb's) and compiled versions ( fmx's, mmx ) . Specificlly the order_v05.fmx is also there.
So why can't the app find the compiled form compiled in the same project and located in the same directory?
I also see several ERR files but the only thing the err files contain is a whole lot of lines saying things like " Compiling POST-FORM trigger on form... No compilation errors."
Any help getting this beast to run would be appreciated.I may have a clue as to what is causing the issue, but don't know how to fix it.
I started poking in the menu items, and the child menu item that is supposed to do something runs some "Menu Item code" like this:
begin
hide_window('DLG_MAIN');
CALL_FORM( 'out_order_v05.fmx'
, no_hide
, do_replace
, no_query_only
, no_share_library_data );
show_window('DLG_MAIN');
end;I made a NEW root menu item, with a new child menu item and set it's "Menu Item code" like this:
begin
hide_window('DLG_MAIN');
CALL_FORM( 'C:\Data\_OraFroms\ITFS_V05\order_v05.fmx'
, no_hide
, do_replace
, no_query_only
, no_share_library_data );
show_window('DLG_MAIN');
end;And when I made this change, my new menu item launched the form, but the original one did not ( notice the only difference is my new menu item gives a fully qualified path to the file name ).
So it looks like my project is clueless as to it's own home directory - anyone know how I clue it in? -
FRM-40010: Cannot read form in Linux
Hi
While running the f60desm command gives below error
FRM-40010: Cannot read form /d01/oracle/prodappl/au/11.5.0/forms/US/PROJECT.fmx
I have defined the following path
1) customPROD_A.env
## PROJECT custom top ##
PROJECT_TOP=/d01/oracle/prodappl/PROJECT/11.5.0
export PROJECT_TOP
2) APPSPROD_A.env
customfile=/d01/oracle/prodappl/customPROD_A.env
if [ -f $customfile ]; then
. /d01/oracle/prodappl/customPROD_A.env
fi
. /d01/oracle/prodora/8.0.6/PROD_A.env
. /d01/oracle/prodappl/PROD_A.env
Environment:
Oracle Applications : 11.5.10.2
RDBMS : 11.2.0.1.0
OS : OEL5
Please help to resolve the problem.
Thanks
Regards
GSMHi,
While running the f60desm command gives below error
FRM-40010: Cannot read form /d01/oracle/prodappl/au/11.5.0/forms/US/PROJECT.fmxDo you have this fmx file located under the $AU_TOP/forms/US directory?
Do you get the same error with other custom forms under the same directory or just this specific form?
I have defined the following path
1) customPROD_A.env
## PROJECT custom top ##
PROJECT_TOP=/d01/oracle/prodappl/PROJECT/11.5.0
export PROJECT_TOPWhat does "Echo $PROJECT_TOP" return?
2) APPSPROD_A.env
customfile=/d01/oracle/prodappl/customPROD_A.env
if [ -f $customfile ]; then
. /d01/oracle/prodappl/customPROD_A.env
fi
. /d01/oracle/prodora/8.0.6/PROD_A.env
. /d01/oracle/prodappl/PROD_A.envHave you sourced the env file again after setting the PRODUCT_TOP? Have you bounced the application services as well?
Thanks,
Hussein -
I am using Oracle Forms Builder 10g and I have created a menu, but I have a problem in calling the form from this menu. The error is FRM-40010 cannot read form. I have changed the Forms_path in default.env and I put path of my folder which contains forms and menu. If anybody knows any solution, please help.
The form name is EMPLOYEES. The code for calling the form is:
open_form('EMPLOYEES.fmx', activate, session);
The path to the directory, which contains my forms is C:\Application.
What should I put in the WorkingDirectory in the formsweb.cfg file? I have already wrote the path, but it doesn't work (workingDirectory=C:\Application). Can you be a little more concrete? Thanks. -
Frm-40010 cannot read form oracle apps
Hi Friends,
I am trying to build a multi form. Form A calls Form B. Both the forms are compiled and I have placed them in the forms/US folder. Both the fmx files have been generated. Form A is accessed from Function. When I click on the function Form A opens up. On clicking a button in Form A, form B opens up. But when I clidk the button I get the error
FRM:40010 Cannot read Form.
Both the .fmx files are generated. We are on 12.1.3
Can someone give me any hints to debug this or let me know what could be the issue. I have not created any function for Form B and Form A passes alomost a dozen parameters to Form B.
Thanks in Advanceuser9197772 wrote:
Hi Friends,
I am trying to build a multi form. Form A calls Form B. Both the forms are compiled and I have placed them in the forms/US folder. Both the fmx files have been generated. Form A is accessed from Function. When I click on the function Form A opens up. On clicking a button in Form A, form B opens up. But when I clidk the button I get the error
FRM:40010 Cannot read Form.
Both the .fmx files are generated. We are on 12.1.3
Can someone give me any hints to debug this or let me know what could be the issue. I have not created any function for Form B and Form A passes alomost a dozen parameters to Form B.
Thanks in AdvanceAre the forms under the correct CUSTOM_TOP/forms/<US> directories?
What is the complete error message you get? Does the error message show any path?
If you want to get more details about the error, please obtain FRD log file -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
FRM-40010 cannot read form c:\temp\test_form
Hi all,
I have a strange problem, I'm working on Forms 4.5, I have made a copy of folder ORANT
from another machine and I did also import of Oracle key into my registry from this machine.
Forms seems to be working ok, I could edit and compile my form, but when I'm trying to execute my form I'm getting an error
FRM-40010 cannot read form c:\temp\test_form
Any idea would be helpful.
BranoCopying the orant folder from one PC to another and importing the Oracle key is NOT the right way to install the software, it MIGHT SEEM to work fine but it never does.
You need to install it using Oracle Installer.
Make sure the FORMS45_PATH registry string contains the correct directory information where you store your forms.
Tony -
ERROR: FRM-40010 : Cannot read form ...
When I try to run any form for second time from Oracle Forms Builder the browser prints mi html code instead of loading the form. And when try to call another form from the curret this error occurs - ERROR: FRM-40010 : Cannot read form ... I have add the path in the registry in the FORMS90_PATH
Can you help me, please?Hi,
Cause: One of the following:
1. You entered a nonexistent form name.
2. You typed an incomplete path.
3. You do not have the proper privileges to run the form.
4. You do not have a compiled copy of the form.
Action: Retype the form name correctly, provide the proper path name, compile the form.
Moreover you said that you have added path in FORMS90_PATH. Does your forms really exists in this directory. Check out this also. -
FRM-40010 - Cannot read form when using Call_form on Unix 9iAS
Hi,
I'm using 9iAS on a unix server. However, the main form calls several other forms using CALL_FORM('formnam'); but it cannot read any of the forms. I've ensured that they have all been compiled on the server. They compiled successfully.
I've also ensured that they are all residing in the FORMS60_PATH. Although it can find the main form OK, it cannot read any of the other forms. They are all located in the same directory.
What can be causing this error?Make sure that formname is the name of the .fmx file and that you use the same case as it is in the file system, because UNIX is case-sensitive.
How are you setting FORMS60_PATH? If you're using the Forms Listener Servlet and are setting the FORMS60_PATH in default.env, be sure that the variable name is spelled correctly. In the early versions of default.env that came out, there was a typo: FORSM60_PATH. So if people didn't notice this and just uncommented the line and set the path, they would get FRM-40010. -
It is very strange.
Working directory given in formsweb.cfg as I:\ABCD
Form name = form1.fmx
This was giving error in application log. unable to switch to working directory.
My working directory was a mapped drive from another server.I change the working directory to
\\servername\sharename\abcd
now i am not getting the switch to working directory error. where as i am getting a new error
unable to read from form1.fmx
any idea?. i am using 11g database and 10g Forms & report services.
I have DS10g installed on my pc. I Migrated from 6i to 10g using migration wizard and compliled all forms in DS10g.hi
i created a test sampl.fmx and copied to my shared path. it is not running.
The sampl.fmx i copied to oracle/fomrs directory, it is working.
So it is purely with the path settings.
But I created a MAPPED DRIVE(I) and if i give I:\MYAPP, It is not working giving error "Unable to switch to the path".
If i change the path from I:\MYAPP to MY Full shared path ie. \\server\sharename\myapp, then it is running but giving FRM-40010 Error.
i think the file i intalled ie as_windows_x86_forms_reports_101202.zip is required some latest pach updates.
do you have any idea of this updates available. -
Intermittent error FRM:40010 Cannot read form
Hi,
I'm having a problem with call_form
Using Forms 6.05.34 Client-server
clients machines are Win95/98
Oracle objects sits on network novell server (fmx's,rep's and oracle executables)
Application starts from icon which sets working directory using "start in"
I navigate between forms using call form and run reports using run_product
-- sample call form:
LIST_ID := Get_Parameter_List ('callass');
If NOT Id_Null(list_id) THEN
Destroy_Parameter_List (list_id);
END IF;
List_id := Create_Parameter_List('callass');
Add_Parameter(list_id,'param_ass_cli', text_parameter,
:assessments.cli_clients_rec);
Add_Parameter(list_id,'param_ass_rec', text_parameter,
:assessments.assessments_rec);
CALL_FORM('ASSESSMENTSC', HIDE, DO_REPLACE, NO_QUERY_ONLY, LIST_ID);
-- sample run product
RUN_PRODUCT(REPORTS, 'CLIENT_ASSESSMENT', SYNCHRONOUS, RUNTIME, FILESYSTEM, list_id, ''); -- also pass parameter list
Global variables are set and reset, parameters are set and reset to null in forms after opening
all forms closed with exit_form
The calendar library is attached to the form. (calendar.pll and stndrd20.olb on network)
We do not set working directory in forms60_path and do not want to for many reasons. Also do not hard code path with form name in call_form for same reasons.
After using system, calling and exiting several forms and running reports. Must run reports that are sent directly to printer before error occurs. (Frm-40010)
Users must exit back to starting menu or exit application and restart.
Only 3 forms and 2 reports are really in use.
Query on Browse form calls editing form which runs report (auto prints) then calls 3rd form which runs report (auto prints). Exit to 2nd form then exit back to browse form (query again .. repeat)
After 3 or 4 repeats the error appears.
As developer, I can only reproduce the error when running oracle from network folder (running oracle executables from network)not when running from my desktop.
Any ideas
Thank you
David
[email protected]Hi,
Cause: One of the following:
1. You entered a nonexistent form name.
2. You typed an incomplete path.
3. You do not have the proper privileges to run the form.
4. You do not have a compiled copy of the form.
Action: Retype the form name correctly, provide the proper path name, compile the form.
Moreover you said that you have added path in FORMS90_PATH. Does your forms really exists in this directory. Check out this also. -
FRM-40010 cannot read from maninda.fmx
My form works once when I run it from a new startup of my fmx file however when i use the service or run it again
i get the above error from the run form on the web and HTML error on oracle forms developer as follows:
<html> <head> ORACLE FORMS.</head>
<body onload="document.pform.submit();" >
<form name="pform" action="http://D675PM0J:8889/forms90/f90servlet" method="POST">
<input type="hidden" name="form" value="C:\Documents and Settings\kammy\Desktop\MANINDA.fmx">
<input type="hidden" name="userid" value="SCOTT/PASSWORD@maninda">
<input type="hidden" name="obr" value="yes">
<input type="hidden" name="array" value="YES">
</form> </body></html>Hi,
this is a problem we randomly experience with Forms 9i and XP. Please set or create a registry entry FORMS90_HIDE_OBR_PARAMS and set its value to 0 (zero)
Frank -
FMR-40010: Cannot read form
I have a unusual error. I have been successful running other forms from the same directory, but I have a new form (the Webutil demo form for 10g). I have configured Webutil to the letter as described in the instructions. When I attempt to run the form I get this error. I do not have Application Server installed, only Forms and Reports server. Could this be the issue?
Does Webutil expect to use functionality from Application Sever 10g, or does the Forms and Reports server install cover the bases.If other forms in the same directory do work, it probably means that your forms_path is OK (unless you use a hard coded path somewhere). Maybe the file permission of the newly installed form is incorrect.
-
FRM-40010 error: Cannot read from .... .fmx
FRM-40010 error: Cannot read from ......... .fmx
Hi everyone,
In my formsweb.cfg file, i have an entry
[iapp]
userid=login/login@db
form=Invlogin.fmx
I attempted to launch my application from the desktop by clicking an icon that points to the URL
http://myapp:8888/forms90/f90servlet?config=iapp
and i received a FRM-40010: "Cannot read from Invlogin.fmx" error.
When i moved the file Invlogin.fmx from my development folder to the
C:\Ora9iDS\forms90 folder, the form is displayed.
What's going on and how do i get the f90servlet to look in a particular location and not just C:\Ora9iDS\forms90 as it appears to be doing.
I have included the path to my development folder in the FORMS90_PATH setting both in the registry and in the default.env file but no luck.
Thanks.Stephen,
does your development folder has a name with a blank in it (or one of the parent directories?). If yes then locate it in a path with no blanks. There is a know problem with blanks in path names.
Frank -
FRM-40010:can not read form
FRM-40010:can not read form/appstest/cmwprodappl/po/11.5.0/forms/us/nwasa.fmx
how can i resolve this error
please tell meRanga,
Make sure the form is there in the correct path.
Error Message: FRM-40010: Cannot read form %s.
Error Cause:
One of the following: 1. You entered a nonexistent form name. 2. You typed an incomplete path. 3. You do not have the proper privileges to run the form. 4. You do not have a compiled copy of the form.Regards,
Manu.
Maybe you are looking for
-
I guess the question explains it all. Twitter will not reload all the tab does is spin. It's been spinning since noon ET today with no luck. New tabs don't work either, just says waiting for Twitter. If I close the browser entirely it does work prope
-
Can a Domain.sites iWeb file be transferred into the new version of iWeb?
So I have my Domain.sites file from my old computer (Home, Library, Application Support, iWeb), but I can't get it to open on my new computer. I assume this is because it is a domain.sites file, and the new version requires domain.sites2? How can I
-
Example file, illustrator file with variables linked to xml
CS5 – Where can i find an example of an illustrator files with variables, linked to an xml file. We want to export it immediately to .pdf format when the file is linked. Is this possible? The illustrator help files are not so clear about this matter.
-
Hi, I'm using Oracle forms 6.n, I have a canvas with a data block on it (which works fine). This data block has two fields (department ID and department Name). The department name field is not available for modification by the users. I've put code on
-
i have a macbook pro and have installed the latest version of numbers but can't open or create a new document