Cannot read from menu file!
Hi All,
When I put the menu property for some form, the form shows this error:
cannot read from menu file
How to solve it?
Make sure the Forms exists in OS PATH if u r calling without the complete path like \\appserver\forms\Myform.fmx
put \\appserver\forms in ur PATH
also check
Check the calling form spelling
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]
Similar Messages
-
UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)
UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry -
Recovery Disk Error : cannot read from source file or disk HOW TO FIX ISSUE
I have had my satellite L655-S5096 for some time now.. I had to switch out hard-drives the other day and installed windows 7 home on it from my own disk. I tried to download all the drivers needed, but the graphics and wifi drivers never worked, so I pulled out the old toshiba disks to start from new with this harddrive.. It gets to asking me for the second disc, then the second disc gives me the the "cannot read from source file or disk PREINST8.SWM" This is from the "out of the box" setting, which is recommended. I do not know how to fix this issue besides reinstalling windows 7 from my disc and trying to get the drivers to work again.. however I shouldn't have to since I have the Toshiba recovery disks.. do I need new disks?
Yes, I also had the hard drive drivers and all of that installed.. my toshiba reads the HDD just fine.
~DrewSatellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry -
AME cannot read from source file???
THE SOLUTIONS POSTED ON THE ADOBE SITE (see below) FOR THIS PROBLEM DOES NOT WORK!!!! Any other suggestions Adobe???
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.Solution 2 did not work. I have been using adobe software for seven years and do not have 'other' problems. The only piece of info I can gather off the forum is that when you have replaced CS3 from a system with CS4, some remnants of CS3 remain to reek havoc. I have isolated the problem to the project file, but still can not get the sequence I need to export or import into another project.
-
I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps. -
Cannot read from the source file or disk
I had to get a new hard drive for my Satellite A665 old one kept freezing up; had a recovey disk from Geek Squad when I got it but they did not work. So I ordered a Recovery Disc set from Toshiba.
A few minutes after I insert the 3nd disc, I get the following message:
Cannot read from the source file or disk
PREINST14.SWM
Type: SWM File
Size: 670 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip. Got another message.
Cannot read from the source file or disk
PREINST18.SWM
Type: SWM File
Size: 372 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip after checking do it for next one. Got error message.
An error has occurred.
Error: 10-FC06-0002
Recovery Error.
Please press [OK] to turn off the computer.
I tried erasing the disk, then running the Recovery Wizard again, but wind up in the same place.It's hard to know exactly what the problem is. You might want to contact customer support because it could just be a faulty disc.
- Peter -
I recently purchased a Mac OS X 10.6.6 which was an upgrade from my Mac OS version 10.4.1.1 I downloaded the Adobe Photoshop CS2 which I had on my old computer and now it cannot read my NEF files which is a RAW file from my Nikon D200. I did not have this problem on my old Mac. I always shoot RAW and can't open any photos. Can anyone help me PLEASE?!?
Do you have access to another Mac to see if the disk can be read by it? If it can't then you're pretty sure it's the disk. If it can then there may be issues with your optical drive which might be cleared up by using a cleaning disk on it, one that uses dry brushes (no liquid).
If you have access to another Mac and it can read the iWork disk make a disk image of it so you can move the disk image to your iMac and install from the disk image.
OT -
Hi, I godt 2 Questions: 1) My Adobe PhotoShop Elements 10.0 for MAC cannot read the RAW files taken with the new Canon 7D Mark II camera. 2) My Photoshop Elements has changed from the danish language to german language, how do I put this back ?
You're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content -
ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
MESSAGE, READS a network error occured while attempting to read from the file C:WINDOWS\installer\iTunes.msiAll sorted now just needed to repair itunes from control panel
-
Suddenly my Nikon Coolpix will not upload on to my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please. I have never had this problem before.
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
You could also try reformat the Card with your camera
Regards
TD -
BRGUI: Connect WindowsXP to AIX: BR0255E Cannot read from standard input
Hi,
I configure brgui.properties and seam everything ok:
brgui.remote-0=D11 (rsh aixd11 -l orad11)
It connect to server, but in the footer of 2nd BRGUI screen (after login screen) it appears "Error: Cannot read from standard input" in red.
And some seconds later the application closes.
I see the log and it has the following:
BR0651I BRTOOLS 7.00 (16)
BR0280I BRTOOLS time stamp: 2008-04-15 16.30.10
BR0656I Choice menu 1 - please make a selection
BR*Tools main menu
1 = Instance management
2 - Space management
3 - Segment management
4 - Backup and database copy
5 - Restore and recovery
6 - Check and verification
7 - Database statistics
8 - Additional functions
9 - Exit program
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
BR0280I BRTOOLS time stamp: 2008-04-15 16.30.10
BR0255E Cannot read from standard input
BR0280I BRTOOLS time stamp: 2008-04-15 16.30.10
BR0654I BRTOOLS terminated with errors
Can anybody help? Maybe is it related with AIX files authorizations?
Thanks a lot!
RuiHi Rui,
Please take note on the following important points.
When you use the remote option, ensure that the environment on the
remote host is fully configured to use the BR*Tools, and that the remoteuser has the relevant database rights. You should also ensure that the
relevant environment files are actually called up during the remote
access.
and
In some cases, BrGui does not work with the Remote Shell rsh from from
Microsoft Windows XP Service Pack 2 or Microsoft Windows Server 2003
Service Pack 1. See Microsoft Support Article ID 896336. Microsoft
offers a hotfix for this purpose. As a workaround, use the rsh from the
previous Service Pack. This is located in the uninstall directory after
the Service Pack has been installed. You can also enter the complete
path in the relevant remote call.
Hope the above information helps. -
Why does Read from Text file default to array of 9 elements
I am writing to a text file starting with a type def. cluster (control) of say 15 dbl numeric elements, that works fine I open the tab-delimited text file and all of the elements appear in the file. However when I read from the same text file back to the same type def. cluster (indicator), the read from text file defaults to 9 elements?? Is there a way to control how many elements are read from the file. This all works great when I initially use a cluster of 9 elements and read back to a cluster of 9 elements.
Solved!
Go to Solution.From the LabVIEW Help: http://zone.ni.com/reference/en-XX/help/371361G-01/glang/array_to_cluster/
Converts a 1D array to a cluster of elements of the same type as the array elements. Right-click the function and select Cluster Size from the shortcut menu to set the number of elements in the cluster.
The default is nine. The maximum cluster size for this function is 256.
Aside: so, how many times has this question been asked over the years? -
LabVIEW for ARM 2009 Read from text file bug
Hello,
If you use the read from text file vi for reading text files from a sdcard there is a bug when you select the option "read lines"
you cannot select how many lines you want to read, it always reads the whole file, which cause a memory fault if you read big files!
I fixed this in the code (but the software doesn't recognize a EOF anymore..) in CCGByteStreamFileSupport.c
at row 709 the memory is allocated but it tries to allocate to much (since u only want to read lines).
looking at the codes it looks like it supposed to allocated 256 for a string:
Boolean bReadEntireLine = (linemode && (cnt == 0));
if(bReadEntireLine && !cnt) {
cnt = BUFINCR; //BUFINCR=256
but cnt is never false since if you select read lines this is the size of the file!
the variable linemode is also the size of the file.. STRANGE!
my solution:
Boolean bReadEntireLine = (linemode && (cnt > 0)); // ==
if(bReadEntireLine) { //if(bReadEntireLine && !cnt) {
cnt = BUFINCR;
and now the read line option does work, and reads one line until he sees CR or LF or if the count of 256 is done.
maybe the code is good but the data link of the vi's to the variables may be not, (cnt and linemode are the size of the file!)
count should be the number of lines, like chars in char mode.
linemode should be 0 or 1.
Hope someone can fix this in the new version!
greets,
Wouter
Wouter.
"LabVIEW for ARM guru and bug destroyer"I have another solution, the EOF works with this one.
the cnt is the bytes that are not read yet, so the first time it tries to read (and allocate 4 MB).
you only want to say that if it's in line mode and cnt > 256 (BUFINCR) cnt = BUFINCR
the next time cnt is the value of the bytes that are not read yet, so the old value minus the line (until CR LF) or if cnt (256) is reached.
with this solution the program does not try to allocate the whole file but for the max of 256.
in CCGByteStreamFileSupprt.c row 705
if(linemode && (cnt>BUFINCR)){
cnt = BUFINCR;
don't use the count input when using the vi in line mode. count does not make sense, cnt will be the total file size. also the output will be an array.
linemode seems to be the value of the file size but I checked this and it is just 0 or 1, so this is good
update: damn it doesn't work!
Wouter.
"LabVIEW for ARM guru and bug destroyer" -
Read from Text File - Help Bug?
Hi - I am currently working on LV8 and I think that there is some misunderstanding potential in the help file. To be more exact in the help to the "Read From Text File" VI.
The description for "count":
" ... If count is <0, the function reads the entire file. The
default is –1, which indicates to read a single line if you placed a checkmark
next to the Read Lines shortcut menu item and to read the
entire file if you removed the checkmark next to the item. "
If count is lower than zero, the function reads the entire file. That sounds clear to me.
The default is -1, which indicates to read a single line if you placed a checkmark next to the "Read Lines" shortcut menu item. Now what? Does it read a single line or the whole file?
.. and to read the entire file if you removed the checkmark next to the item. I thought it reads the whole file if I use -1 ?
the VI itself behaves as I'd expect it to:
* If I place a checkmark next to Read Lines and put -1, I get an array containing the lines
* If I remove the checkmark, I get only a single string item.
Now where is the error? Is the VI not working properly or only the description a little bit ... strange ??hein??
?what?
Both you guys lost me..
And I drink coffee without sugar (being sweet enough, already)
Here is what I get from Context Help on the Read From Text File:
Read from Text File
Reads a specified number of characters or lines from a byte stream file. By default, this function reads all characters from the text file. Wire an integer value to count to specify how many individual characters you want to read starting with the first character. Right-click the function and place a checkmark next to the Read Lines option in the shortcut menu to read individual lines from the text file. When you select the Read Lines option in the shortcut menu, wire an integer value to the count input to specify how many individual lines you want to read from the file starting with the first line. Enter a value of -1 in count to read all characters and lines from the text file.
Humm.
New feature (again).. If you select checkmark the Read Lines option, it will not send the text to a sting indicator, as shown in the attached image. If selected, then it's expecting to write lines to an array of strings... WHY??? I don't know.. I'll ask..
Strange... LV8 is full of mysteries...
RayR
Attachments:
bad write file.JPG 33 KB
more bad write file.JPG 12 KB -
while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
My iPad dosen't open, my screen is black even if I use the open/close buttun??what can I do
My iPad won't open, my screen is black even if I use the open/close reset botton???
-
MRNB- Revaluation with Logistics Invoice Verification Vendor wise
Dear Experts, As per SAP standard MRNB transaction is vailable for Revaluation of Purchase Order Price changes. My requirement as below: We are manitaining Purchasing Info Records compulsory. when purchasing rate changes, we are changing Info Records
-
IPhoto doesn't recognize my canon after update to Yosemite
iPhoto doesn't recognize my Canon any more after my update to Yosemite
-
How to capturing Mouse double click action?
Hi all, how can we identify the "mouse double click" action? MouseListener has methods for only mousePressed,released,clicked (single). Thanks in advance.. Regards Sojan
-
Does blackbeery have a program/software like skype. I really need a soft to call to others computers from my blackberry 8310. Just sign session and call a contact who stay in his computer. Thanks for all. Alberto from argentina.